What is generic PnP in Device Manager?
Original title: Identification of the display by the Device Manager in Windows 7
Hello community,
I have two Dell 24 "ultrasharp monitors connected to my computer (i.e., Dell Dimension XPS 420) via an Nvidia GeForce GT 620 graphics card. When I check the device to the display manager, it shows the first monitor as a generic "PnP" monitor and the second as a Dell screen. In addition, I chose the second monitor as the main one. Does anyone know why the first monitor is referred to as under the generic name by Device Manager?
Thank you in advance.
Hello
Thanks for posting in the Microsoft Community Forum. Rest assured that we would do our best to help you.
A generic driver just means that Windows 7 has installed one of its drivers and the component should work fine, but maybe not as many features as the drivers from the manufacturer.
If you're worried, just go to the support site for the manufacturer of your area and see if there are any drivers you can download and install.
Update drivers: recommended links
http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links
Hope this information helps. Please do not hesitate to answer, we would be happy to help.
Tags: Windows
Similar Questions
-
I'm trying to solve some problem glitchy mouse wireless on my new PC Windows 7 x 64 (barebones using ASUS P8H67 - I Deluxe MB w / 8 GB RAM and Intel i5-2500 CPU).
Wireless USB of Microsoft mouse. I downloaded and installed the latest Intellipoint drivers.When I look at Human Interface Devices in Device Manager, I see a list of devices. Here are below with some of their properties in the columns (although MGFR and LOCATION version/date are not part of the displayed list - you have to dbl - click the device to get this info).All devices are "working properly" according to Device Manager. But the movement of the mouse on the screen is sporadic and irregular - jumpy. New battery does not solve the problem.This list has duplicates? Or is the apparent redundancy necessary? Some drivers are old. Others are recent.There remains that should be removed?The PC has four 4 USB 3.0 and two 2 USB 2.0 ports.I have aKeyboard USB (USB 2.0 port)a USB (USB 2.0 port) wireless mousea battery-backup/ups connected to the USB (USB 3.0 port)and a Logitech USB (USB 3.0 port) wireless headsetAnd when it comes to location 0Thanks for the help.DEVICE................................................................ MFGR...................... LOCATION.......................................................... Version... DateHUMAN INTERFACE DEVICESBluetooth AVRCP device... Atheros... On Microsoft Bluetooth enumerator... 6.18.624.302...6/24/2010The HID-compliant consumer control device... Microsoft... Location 0...6.1.7600.16385...6/21/2006The HID-compliant consumer control device... Microsoft... the Bluetooth AVRCP device... 6.1.7600.16385...6/21/2006The HID-compliant consumer control device... ... On Microsoft mouse USB Microsoft Hardware... 6.1.7600.16385...6/21/2006The HID-compliant consumer control device... Input device Microsoft... on USB... 6.1.7600.16385...6/21/2006The HID-compliant consumer control device... Input device Microsoft... on USB... 6.1.7600.16385...6/21/2006HID-compatible device... (standard system) on the USB input device... 6.1.7601.17514...6/21/2006HID-compatible device... (standard system) Location 0...6.1.7601.17514...6/21/2006HID-compatible device... (standard system) on the USB input device... 6.1.7601.17514...6/21/2006Microsoft Hardware USB keyboard... Microsoft... 0000.001D.0000.001.005.000.000.000.000... 8.20.409.0...5/18/2011Mouse USB Microsoft Hardware... Microsoft... 0000.001D.0000.001.005.000.000.000.000... 8.20.409.0...5/18/2011Input USB device... (standard system) Location 0...6.1.7601.17514...6/21/2006Input USB device... 0000.001d.0000.001.003.001.000.000.000 (standard system)... 6.1.7601.17514...6/21/2006Input USB device... 0000.001d.0000.001.003.001.000.000.000 (standard system)... 6.1.7601.17514...6/21/2006Input USB device... Microsoft... Port_#0006.Hub_#0004...6.1.7601.17514...6/21/2006Input USB device... 0000.001d.0000.001.005.000.000.000.000 (standard system)... 6.1.7601.17514...6/21/2006KEYBOARDSKeyboard HID device standard keyboards.on Microsoft Hardware USB keyboard... 6.1.7601.17514...6/21/2006Keyboard HID device USB Input device standard keyboards.on... 6.1.7601.17514...6/21/2006MOUSE and OTHER DEVICES of SCORECompatible mouse HID... Input device Microsoft... on USB... 6.1.7600.16385...6/21/2006Wireless mouse Microsoft USB Dual received... ... On Microsoft mouse USB Microsoft Hardware... 8.20.409.0...5/18/2011Thanks for the reply.
I deleted the HID-compliant devices and the standard Microsoft mouse in device, removed the key to wireless USB mouse and reinserted, Manager which caused an automatic installation of the devices, and now the mouse movement is smooth.
-
Tecra M2: XP Device Manager shows 4 yellow exclamation points
Hello
I had too to recharge my laptop with XP and have 4 devices in the device with the yellow exclamation point Manager.
Ethernet controller
Network controller
Unkown
Multimedia audio controller.I have havetried to install drivers WITHOUT success.
I have tried loads yet joy o,I'm missing something.
Can someone helpHello
I'll try to identify the devices without plug & play id, but I can't guarantee anything.
If something is wrong please post the PnP - ID (Device Manager-> properties-> details-> ID devices material).Ethernet controller is Intel Pro/100 VE or Intel Pro 1000/MT (both have been integrating M2) network adapter
http://support.toshiba-tro.de/Tools/updates/LAN/LAN-XP-8790.zip or http://support.toshiba-tro.de/tedd-files2/0/lan-20070912134727.zipNetwork controller is Intel Pro Wireless 2200 GB or 2100 (same as above, both were build most of the cases. Others like too Atheros and Cisco, but not so often)
http://downloadmirror.Intel.com/13000/Eng/11.5.0.0_xDrivers.zip or http://downloadmirror.intel.com/11918/eng/Intel (R) PROWireless21_125836.zipUnknown device of infrared
http://support.toshiba-tro.de/tools/Tecra/TM2/XP/IrDA-TM2-XP-5125000.zipMultimedia audio controller is the SoundMax
http://support.toshiba-tro.de/tools/Tecra/TM2/XP/sound-TM2-XP-512015160.zipPlease allow me two questions:
Why don't you use the recovery media. It is much easier?
Have you tried to install any driver Toshiba driver page? http://computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp -
Network controller not recognized by Device Manager
Device Manager cannot recognize my Dell Inspiron 15 network controller. It is marked as an unknown device.
Can someone please direct me as to where I could download the driver network controller, if indeed that is what is needed for the Device Manager to recognize the network controller.
My Dell is unable to locate any available internet connection and I think it has to do with the network being not recognized controller
Thanks in advance.
Ibou
Have you also selected the right operating system before downloading all the drivers from there?
If nothing helps, you ask Dell Support Forums:
http://en.community.Dell.com/support-forums/default.aspx
See you soon.
-
A midi device manager is available in Windows 7
original title: the midi device manager?
It's going to be a midi for windows Device Manager 7?
the main objective of my machine is multitrack recording and I use midi devices...
Thank you...Hello
Could you please answer this questions?
one) to tell us exactly what you want in the Device Manager?
(b) are you face any problem when you use Midi devices?
(c) say us more about it?Here, if you need the device to be listed in Device Manager then you can contact your hardware vendor to get the latest drivers for the device you are using.
To do this:
1. open Device Manager by clicking the Start button, click on the Control Panel, clicking system and
Maintenance and then click Device Manager. If you are prompted for an administrator
password or confirmation, type the password or provide confirmation.
2. in Device Manager, locate the device, and then double-click the device name.
3. click Driver tab, then click on set to update driver and follow the instructions.
Now, try to follow the link provided to update a hardware driver that is not working properly and check the question below.
http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
If you want to suggest changes in the design here is the link you can make reference to: Microsoft Connect - back products and bug reports. Microsoft...
https://connect.Microsoft.com/dashboard/Info/Thank you, and in what concerns:
I. Suuresh Kumar-Microsoft Support.
Visit our Microsoft answers feedback Forumand let us know what you think.
-
I am slot as Windows 7 Pro on a Dell Intel 64 bit pc with a screen HD Dell I5 and Intel HD graphics 4600 driver. PC woke up a few hours of inactivity, after no updates known to windows or other programs, with icons and pages double size beyond the limits of the monitor, setting the low resolution and Device Manager showing ' no generic pnp monitor low resolution ' instead of 'Monitor Dell HD' and no option to increase the resolution. No help with reset, not restoration, disconnection and reconnection monitor auto plug n Play, 'Search new device', 'add a device', update of the graphics driver, reinstall the drivers from the Dell monitor. Troubleshooting peripheral reported to date and working correctly. After I finally uninstalled driver restarted, and graphic displays "default monitor" Device Manager (no longer "generic low resolution"), no graphics driver identified, but don't allow me to change to a higher resolution. New windows had to be individually size / expanded to fill the screen. This can be corrected? I want to optimize my display settings for this monitor. I have reinstall my graphics driver or just be happy that I can use my computer? Thank you.
Call Dell. Your monitor should have a 3-year warranty. Your matching OptiPlex with a warranty of one year more.
Also, check all the hidden and invisible buttons on the monitor. Someone may have inadvertently changed one of these.
-
Portege M700: Device Manager reveals five peripheral generic HID-Compliant
We have a M700 Tablet, which came with Vista, but came back to XP using supplied reinstall drive.
The machine works fine for most, but sometimes suffers from a deadlock, which seems to be related to the touch screen.
In device manager reveals five generic "HID-Compliant device" that appear to be duplicates for the other five entries in this section - the other entries seem to be the correct devices because they have specific names - Toshiba tablet buttons type "N" 'USB Human interface device', 'Virtual Driver Touch' "Virtual touch interface" and "Wacom Penabled dual touch"-if each device properties are inspected the settings under 'Driver', 'Détails' and 'Resources' are identical.
I tried to remove redundant entries by deleting in normal mode and safe, but devices reappear.
Is it possible that I can remove these entries and eliminate a conflict between these elements as a source of blockages.
Thank you very much
Hello
Normally it should t be a conflict for resources between these different devices.
The Windows operating system should assign automatically different resources if it is needed.> I tried to remove redundant entries by deleting in normal mode and safe, but devices reappear.
You can disable the device in Device Manager.
You must first mark the device and then turn it off using the Disable option.
It s a red circle with small PC.See you soon
-
XP Device Manager shows me 'PnP BIOS Extension' with a yellow top flag
I tried to load the new software for an HP printer and it would not load correctly. I checked the Device Manager to see if the USB port has an error, but instead I see an icon with a yellow flag on it in "System devices". The name of the icon is 'PnP BIOS Extension'. I just click the mouse over it to see the Properties , and there are three tabs: general, pilot, Details
the device status window general tab has this message: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39).
Driver tab, it says:Driver provider: unknownDriver date: not availableDriver version: not availableDigital signer: not digitally signedOn the Details tab, it says: ROOT\SYSTEM\0003I tried the driver but it failed with the message: the hardware was not installed because the wizard cannot find the necessary software.
Can someone help me understand how to fix this problem?Well you can right click on it, select "update driver..." Or, try to update the
Hp BIOS, if its current, you may have a defective battery on board, it would be
give some data, but perhaps not all, anytime, cold weather brings on battery
and the questions of the bulb... Also, try to update the software of the chipset advice, get it from its
MFG (intel, amd, etc.), which gives the ability to run hardware tips xp...
-
My floppy drive is not reading the disks. Device Manager does not detect any problems, I uninstalled and reinstalled the drivers.
Convenience store said to click on properties Insert the diskette and
Double click on open, but when I do that it stop computer
and opens the recovery and ask for a correct diskette,Hello Tallm,
Thank you for your message. Did you get your floppy drivers of your installation diskettes? If so, go to the website of the manufacturer of your computer and download/install the latest drivers. Please let us know if this or help to solve your problem.See you soonEngineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.
-
What happens if I disable the processor in Device Manager
I see 2 processors in Device Manager. What happens if I disable the processor in Device Manager
Hello
Since you say that it works perfectly in safe mode, I think that there is a problem with a driver or an application causing this boot loop.Please see this thread with details exactly what a clean boot is and how to use it to solve the problems of this kind. The idea behind a clean boot is to identify the exact cause of the problem so that we can fix or remove the troubled application. -
What is c? It is in Device Manager no plug & play drivers Code 24 problem
What is c? It is in Device Manager no plug & play drivers. It has an Exclaimation Point on the list. Problem Code 24. Does not work properly. No availible solutions. I have problems with slow PC & can get not Canon MP 160 to print photos. Had a Runndll/cnmss on Start up.
This is almost certainly an outdated driver for antivirus MSE - you have probably a new set already installed.
just right click on the driver and choose uninstall.
-
My computer says "no audio output device is installed" when I open the Device Manager there is no 'sound, video game... ". "in the menu. What should I do to get a new installed audio device?
Stan
Hello
1. What is the brand and model of the computer?
2 did you and changes before the show?Method 1:I suggest you open recognition of the device by using Device Manager.
(a) click Start and type Devmgmt.msc, and then Enter. The Device Manager window opens.
(b) click on your computer as the location for the scan.
(c) on the Action menu, click Scan for hardware changes.
(d) to close the Device Manager window, and then restart the computer.Method 2:You can try to download and install the latest drivers for the sound from manufacturing sites and check.
Check out the following link.
Updated a hardware driver that is not working properly
http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctlyMethod 3:You can see the following link.No sound in Windows
For reference:
Tips for solving common audio problems
http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problemsSound cards: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows-Vista/sound-cards-frequently-asked-questionsIt will be useful. -
Went to Device Manager. It shows my laptop integrated webcam and shows my printer/scanner "cameras". But it does not show the built-in webcam of the independent monitor, and I can't find how to get the Device Manager to see the device. Help!
Hello
Dell should have drivers and the control software available on their site. Please refresh your
If possible driver and reboot before you load the new driver.Dell - drivers
http://support.Dell.com/support/downloads/index.aspxHelp generic camera:
Control Panel - Device Manager - click anywhere in the box of white/white - then VIEW - Show Hidden
Devices - look everywhere except IMAGERY for your camera and if found right on it - click UNINSTALL
-REBOOT.Control Panel - Device Manager - click anywhere in the box of white/white - then ACTION - Scan for
Hardware changes. If that detects your camera, then load and restart.Double-click Control Panel / Device Manager - Imaging - writing down of the brand and model of camera.
on this subject and on the tab of the driver is version. Now, click on update drivers (who are unable to do anything as MS
is far behind the pilots of certification). RIGHT click on the camera - UNINSTALL - REBOOT - it
will update the driver stack. While there or not the USB update, then go to DELL and
Download the latest version of the driverControl Panel right CLICK on EVERYTHING - Serial USB controllers - device configuration-manager and
UNINSTALL all but the category itself - REBOOT - it refreshes the drive and battery USBThis KB shows XP how to and the method of Vista is identical
http://support.Microsoft.com/kb/310575Now, go to the system manufacturer (Dell) website and download the latest driver for the camera and the other related camera
software (if not more recent get the same).Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each driver.
Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlThen let windows updates on however prevent loading of drivers who are often older than the
those that you have installed. If updates suggests a pilot and then HIDE it and watch manually to see if their
really is a more recent version (at the time system manufacturer and the sites of the manufacturer of the device).How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx------------------------------------------------------
Please check with Dell Support and forums for help and known issues:
Dell support
http://support.Dell.com/Dell forums
http://en.community.Dell.com/forums/
I hope this helps.Rob - bicycle - Mark Twain said it is good.
-
IM 2 play games by train but I don't have flash player but I have Device Manager has disappeared from my computer
Hello
I suggest you to follow these steps and check if that helps:
Method 1:
Try to perform the clean boot and check if it helps:
http://support.Microsoft.com/kb/929135NOTE: When you are finished troubleshooting, make sure that restore you the computer mode normal startup such as suggested in step 7 of the above article.
Method 2:
Follow the steps in the link below and check if this can help:
http://support.Microsoft.com/kb/2528246It will be useful.
-
My Device Manager will also accept not my wireless keyboard I have logitec
Hello
You can check this link:
Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
Maybe you are looking for
-
Projector not recognized in El Capitan
My projector is not recognized by El Capitan. I have tried on 3 laptops running El Capitan and it either blocks the laptop, or it does not recognize it. I tried to reset the SMC, and I tried now the Option key pressed to get the option detect scree
-
I need supports T61 as backup: tips on where to buy?
My current T61, I love, suggests to me that maybe it's go south one day (a long 2 short beeps which so far I got since).It looks like my cheapest option and happy would be a use or renovated T61 since I can move my DPS and 8 GB of Ram and Windows 7 C
-
Lexmark Z25 printer has new cartiges, but prints blank. What's wrong?
I just installed my Lexmark Z25 printer on my brand new laptop and replaced by the new ink and the page will pass through white. What's wrong? I tried the test page, clean and even tried to find the driver closest to install it, there seems to be not
-
Conversion of the apk from bar on jenkins build server
Hello I somehow got in trouble to try to configure the server to build jenkins to convert my apk to bar. I use this script for the conversion that works very well #!/bin/sh cd /var/lib/blackberry.tools.SDK/bin ./apk2bar ../apk/ /var/lib/android-sdk-l
-
X200s - fingerprint reader and wesite passwords
I recently had to reload the OS and now I can not understand how to enable the option, which uses the fingerprint reader to connect to Web sites. In the past whenever I visited a site that requried a newspaper in it asked me to slide my finger. Any