What is 'global\systemroot\system32\H8SRTgdnqksgnby.dll '?

Similar Questions

• DLL Global\systemroot\system32\H8SRTmvumrxwnbv.dll

  I tried to download malwarebytes and open it to fix the problem, but for some reason malwarebytes won't open. I tried in safe mode and it still not open. Any help would be greatly appreciated.
  Thank you.

  Hello

  It can be made repeatedly in Mode safe - F8 tap that you start, however you must also run them
  the Windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs. It comes
  a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also do to the General corruption of cleaning and repair/replace damaged/missing system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• What is c? [.shellClassicInfo] LocalizededResourceName=@%SystemRoot%\system32\shell32.dll,-21799

  A shortcut of desktopnotepad was created on my laptop computer containing this information
  [ShellClassicInfo]
  LocalizedResourceName=@%SystemRoot%\system32\\shell32.dll,-21799
  This opens when I turn on the computer. What is it? How can I find out where it belongs? How do I put back it? How can I remove shortcut without deleting the information.

  This Knowledge Base article is the reason and fix it, even if it was written for XP:

  http://support.Microsoft.com/default.aspx?scid=330132

  You will need to turn on 'Show hidden files' of Folder Options in Control Panel. You can disable them again after correcting the problem of Notepad.
  MS - MVP - Elephant Boy computers - don't panic!

• This appears when you start Windows XP: [.] ShellClassInfo] LocalizedResourceName=@%SystemRoot%\system32\shell32.dll,-21787

  It appears at the start of Windows XP:

  [. ShellClassInfo] LocalizedResourceName=@%SystemRoot%\system32\shell32.dll,-21787

  What should I do to fix the problem?

  Found the answer: http://support.microsoft.com/default.aspx?scid=330132

• Background Intelligent Transfer Service is listed a @%SystemRoot%\System32\qmgr.dll,-1000

  I am running Windows XP SP3 on a desktop computer. I have a problem with windows update does not, I think the problem is the BITS service.
  In the Services list, Windows Update is listed and put on the market but (BITS) Background Intelligent Transfer Service is listed as ' @% SystemRoot%\System32\qmgr.dll,-1000.»
  I tried to follow the instructions on this link.http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_update/bits-not-listed-under-services-in-win-xp/9e0a3fe5-e193-4441-b3f4-85df0e9b42aa
  I did a search for qmgr.dll and only found a location C:\WINDOWS\system32.
  Research has not found
  C:WINDOWS\ServicePackFiles\i386
  C:WINDOWS\system32\bits
  I also tried
  Microsoftfixit.wuRNP.13130938846183180.1.1.Run.exe
  Microsoftfixit.wuMATSKBRun.exe
  MicrosofFixit.wu.RNP.12309915728318878.Run.exe
  Don't know why there are three versions?
  I run some antivirus scans and found a problem on a second hard drive. I removed the disk and another scanner so that the C drive is clean. I don't know what caused this, but I don't think it's a virus.
  I think I have my installation disc, so perhaps this is an option to use.
   
  Hope someone can help.
  Thank you

  I am running Windows XP SP3 on a desktop computer. I have a problem with windows update does not, I think the problem is the BITS service.
  In the Services list, Windows Update is listed and put on the market but (BITS) Background Intelligent Transfer Service is listed as ' @% SystemRoot%\System32\qmgr.dll,-1000.»
  I tried to follow the instructions on this link.http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_update/bits-not-listed-under-services-in-win-xp/9e0a3fe5-e193-4441-b3f4-85df0e9b42aa
  I did a search for qmgr.dll and only found a location C:\WINDOWS\system32.
  Research has not found
  C:WINDOWS\ServicePackFiles\i386
  C:WINDOWS\system32\bits
  I also tried
  Microsoftfixit.wuRNP.13130938846183180.1.1.Run.exe
  Microsoftfixit.wuMATSKBRun.exe
  MicrosofFixit.wu.RNP.12309915728318878.Run.exe
  Don't know why there are three versions?
  I run some antivirus scans and found a problem on a second hard drive. I removed the disk and another scanner so that the C drive is clean. I don't know what caused this, but I don't think it's a virus.
  I think I have my installation disc, so perhaps this is an option to use.
   
  Hope someone can help.
  Thank you

  I think that another procedure also credit Xircal will work for your script, so I copy and paste it here.  This assumes that you have no subfolder named bits in the system32 folder

  Here are the steps to follow if you have qmgr.dll in C:\WINDOWS\system32

  1. Go to C:\WINDOWS\system32, right-click and select new | Folder
  2. Name bits (lower case) If you lose the highlight, click on new folder to select it again and then hit F2. Delete "new folder" and rename it to bits
  3. Open C:\WINDOWS\system32 still once, find qmgr.dll, right-click and choose copy from the menu.
  4. Open C:\WINDOWS\system32\bits and choose Paste. You should see qmgr.dll appear in the bits folder.
  5. Then, go to Start, run , and copy/paste: regsvr32 qmgr.dll and click OK (If you have run on the start menu, hit instead of key Windows + R)
  6. Do the same with this file: regsvr32 qmgrprxy.dll
  7. Restart the PC and then copy / paste this command into the field run:
  
  %windir%\System32\rundll32.exe setupapi, InstallHinfSection DefaultInstall 132 %windir%\inf\qmgr.inf
• If you are prompted to insert the Windows installation CD, ignore this and in the dialog at the bottom where it says copy the files, change the path to C:\WINDOWS\system32
• Restart the PC and then go to the Services and you should be able to see BITS in the list. Open the Services menu, go to start / run, copy and paste services.msc and click OK.
• In the Background Intelligent Transfer Service BITS or is visible in the list, double-click it, and then click on the Start button. This step is just a test to make sure it works properly.
• If you get 2 error: cannot find the specified file, click on start, then run again and copy / paste the following command, and then click OK:
  Tracking Add HKLM\SYSTEM\CurrentControlSet\Services\BITS\Parameters /v ServiceDll /t REG_EXPAND_SZ /d %windir%\System32\qmgr.dll
• Reboot again and try once more to start the PIECES. It should work fine now, but in the unlikely case where it fails again, run the following command, and then press ENTER:
  Reg add HKLM\SYSTEM\CurrentControlSet\Control\BackupRestore\FilesNotToBackup
• Restart again, and then proceed as follows:
• Go to this link and install the IE8 November update:
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=41074
• Finally, go to the Windows Update site and you should be able to download normally.

  Update regarding the step #14

The linked TechNet page

http://TechNet.Microsoft.com/en-us/security/dn481339

will give you a link for each update of the cumulative months for internet security explore who you must manually download and install before you will not be able to access windows update

https://TechNet.Microsoft.com/en-us/security/bulletin/MS13-097 is this month December 10

Select the download that is necessary for your version of Internet Explorer and download and install it and restart your computer before you visit Windows Update to get other updates which will then become accessible, after the prior cumulative IE security update is downloaded and installed MANUALLY and the computer is RESTARTED.

• Error message at startup [.] ShellClassInfo] LocalizedResourceName=@%SystemRoot%\system32\shell32.dll,-21787

  original title: [.] ShellClassInfo] LocalizedResourceName=@%SystemRoot%\system32\shell32.dll,-21787

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  "Ideas: why make this message at startup ' [.] "ShellClassInfo] LocalizedResourceName=@%SystemRoot%\system32\shell32.dll,-21787" how I can remove it?

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  The greatest gift that anyone can give to someone else's time. So thank you for your.

  Nothing I've tried on this Web site or any other does not prevent the error of dll text block whatever the hell it is.

  MS know no more apparently.

  but they don't

  http://support.Microsoft.com/kb/330132

• Problem at startup error: [.] ShellClassInfo] LocalizedResourceName=@%Systemroot%system32 shell32.dll - 21787

  Original title: problem when starting

  Hello. Whenever I connect to my laptop, a notebook always appear in the office showing a message-

  [. ShellClassInfo]

  Shell32.dll LocalizedResourceName=@%Systemroot%system32-21787

  What does that mean? I'll do my laptop freeze. I can not even access the Task Manager by pressing Ctrl + Alt + Delete.

  I restart the laptop but the message still appears, and then it will freeze again. I can't use my laptop because it's only 3 - months old.

  Someone can help me. Please, I beg you. Surely, I'd appreciate any help. Thank you.

  Hello

  Thanks for posting your query to the Microsoft forum. I will definitely help you with this.

  This problem may occur if the following conditions are met:

  • A Desktop.ini file exists in one or more of the following folders, where drive is the drive on which Windows is installed:
    • drive: \Documents and Settings\All Users\Menu Menu\Programs\Startup
    • drive: \Documents and Settings\All Users\Menu run\programs
    • drive: \Documents and Settings\All Users Menu

  Method 1: Delete the Desktop.ini file

  1. Start Windows Explorer.
  2. On the Tools menu, click Folder Options, and then click the view tab.
  3. In the area of Advanced settings , click on to disable the Hide extensions for known file types check box and the check box that Hide protected operating system files (if they are not already turned off), and then click OK.
  4. Delete all occurrences of the Desktop.ini file that contains the lines described earlier in the "Symptoms" section of this article. To do:
     • Locate each of the following folders, right-click the Desktop.ini file, (if the file exists in that folder), and then click Open:
       • drive: \Documents and Settings\All Users\Menu Menu\Programs\Startup
       • drive: \Documents and Settings\All Users\Menu run\programs
       • drive: \Documents and Settings\All Users Menu

       where drive is the drive on which Windows is installed.

     • Verify that the file contains the following lines:

       [.ShellClassInfo]
       LocalizedResourceName=@%SystemRoot%\system32\shell32.dll,-21787
       

       If the file contains these lines, right-click the file, click Removeand then click Yes when you are prompted to confirm the deletion.

  5. Restart your computer and verify that the problem is resolved.

  Method 2: Use the (Msconfig.exe) System Configuration utility to disable the startup item

  1. Press Windows + R keyboard a type of execution.
  2. In the Open box, type msconfig, and click OK.
  3. Click the Startup tab.
  4. Clear the check box next to any Office entered into the column of the startup item that are referred to as common startup in the location column and can be found in one of the following locations (as indicated in the command column):
     • drive: \Documents and Settings\All Users\Menu Menu\Programs\Startup
     • drive: \Documents and Settings\All Users\Menu run\programs
     • drive: \Documents and Settings\All Users Menu
  5. Click OK to quit the System Configuration utility.
  6. Restart your computer and verify that the problem is resolved.

  Method 3: run Microsoft safety scanner

  I suggest you to run the Microsoft safety scanner.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  Run a full scan of the computer with the Microsoft Safety Scanner to make sure that the computer is virus-free.

  Microsoft safety scanner

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Let us know if you need more assistance. We will be happy to help you.

  ________________

  Thank you best regards &,.

  Isha Soni

• STOP: c0000221 Unknown Hard Error\Systemroot\System32\ntdll.dll

  I have a Dell Vostro 1500 running Windows XP Home edition.  During the Windows boot the system falls down and shows the error in the title above. I replaced and improved hard drive and modules memory live with Dell components and tried to launch the system to start disk.  Same result screen, blue with the unknown hard Error\Systemroot\System32\ntdll.dll STOP: 0000221.  Then new hardware configuration and system bootable drive equals the same result.  Any advice will be appreciated.

  Thank you, everyone, for all the good advice and help. Interestingly, I used a reinstall drive different (one for the same version of Windows XP SP2), and it worked fine. I think this would indicate that the original disk could have been the cause of the problem, but I tried to install the operating system with this drive just to be safe, and it worked. It should be noted that I did no changes to the machine until I tried the new disk, then retried first that I tried to use to reinstall the operating system. This suggests that, regardless of the problem, he don't has not been caused a constant problem.

• Intrusive start window - LocalizedResourceName=@%SystemRoot%\system32\shell32.dll,-21787

  On start-up, the first thing to appear is a desktop.ini wndow: [.] ShellClassInfo] LocalizedResourceName=@%SystemRoot%\system32\shell32.dll,-21787. I have to delete every time. It's embarrassing. How can I get rid of him? See you soon!

  I suggest running Microsoft 'FixIt' in the following article:

  http://support.Microsoft.com/kb/330132

• We get answerSTOP: c0000221 Unknown Hard Error\SystemRoot\System32\ntdll.dlls

  My Dell crashed.   When I try to restart, it will start not (in any mode): can't go in Safe Mode or last mode of work or other.   I managed to get to the blue screen and I saw the following: STOP: c0000221 Unknown Hard Error\SystemRoot\System32\ntdll.dll

  I did some research that says I can try to reinstall / Windows XP Recovery and that this could make it work
  I have all the original disks.
  Can I use the Microsoft XP disk and how can I reinstall without wiping my hard drive (I'm terrified by wiping my hard drive)
  The manual of Dell said to insert the Windows XP installation disk and I have the ability to REPAIR, not REINSTALL
  Will this work?
  Another site indicates that the problem is that the drivers are up to date...  I can't update because the PC is not connected to the internet
  Help, please

  Hi Niallmcardle,

  I suggest you follow steps from Microsoft Knowledge Base article and check if it helps.

  A Stop: 0xc000026C or Stop: 0xc0000221 "Unable to load device driver" error occurs when you start Windows XP

  http://support.Microsoft.com/kb/315241

  I hope this helps.

• What does C:\Windows\System32\BFE32.dll mean?

  What does C:\Windows\System32\BFE32.dll mean? I get this message everytime Iask my laptop at all do. It seems harmless enough as once I approved it everything works normally. That's all just annoying. Also, is it possible to return to a restore system to one other specific time point as the previous three days IE a month ago? Thank you.

  Hello

  If you Google "BFE32.dll", it comes as malware (a fake security program)

  Error messages that can be used:

  • "A required DLL, bfe32.dll is not found."
  • "This application has failed to start because bfe32.dll was not found."
  • "Cannot find bfe32.dll".
  • "The file bfe32.dll is missing."
  • "Cannot start Microsoft Windows. A required component is missing: bfe32.dll. »

  Download, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And here's how to go in Safe Mode options; Select safe mode with networking from the list of options:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  System Restore problem:

  Malware will interfere with the restoration of the system.

  After you have analyzed your system, try again SR.

  See in this connection in the second image under choose a Restore Point is a box to search for points of restoration more than 5 days.

  http://bertk.MVPs.org/html/restoresysv.html

  Either the old restore points have already been created, or they do not exist.

  And system restore deletes older restore points as the most recent are created.

  See you soon.

• Anyone know what the error windows\system32\urgRLfgh.dll? Or where to go to get a fix?

  error urgRLfgh.dll

  Anyone know what the error windows\system32\urgRLfgh.dll? Or where to go to get a fix?

  Thank you

  Andrea

  Hello

  1. Once you get this error message?

  2. did you of recent changes to the system before the show?

  Please provide more information on the issue to help you best.

  Suggestions for a question on the help forums

  http://support.Microsoft.com/kb/555375

  Meanwhile, I suggest you perform the methods mentioned below and check if it helps.

  Method 1:

  Follow the link below and check if the problem persists in safe mode.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Method 2: perform a clean boot.

  To perform a clean boot and see if the problem still occurs, follow the steps in the below link.

  http://support.Microsoft.com/kb/929135

  Note: once you are done with the boot, follow step 7 in the link to your computer in normal mode.

  Method 3: perform a virus scan

  I suggest to download the Microsoft security since the link Scanner and performs a search on your system. Check if the problem persists.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: Microsoft safety scanner ends ten days after downloading. To re - run a scan with the latest definitions of anti-malware, download and run Microsoft Safety Scanner again.

  Let us know if it helps.

• What is c:\WINDOWS\system32\nmoyptco.dll

  This happens every timie I start my computer. What is and how to fix it?

  I would also like to do this:

  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.

  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.

  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.

  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.

  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.

  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
  . There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply turn off (uncheck the entry), reboot, and if the problem is resolved and things work normally and everything works fine, then delete the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that your system has or has had an infection, follow up with this:
  Perform scans for malware, and then fix any problems:
  
  No matter what you use for malware protection, follow these steps:

  Download, install, update, and make at least an analysis full (not at the same time) with these free malware detection programs:
  Malwarebytes (MMFA): http://www.malwarebytes.org/products/malwarebytes_free
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  These comprehensive analyses can take some time, but you really need to run.  SAS will probably be just a bunch of Internet tracking cookies, but you can remove them.  Once you have done at least a full analysis, you can do quick scans in the future to save time and save the analyses complete for when you have more time or are really suspicious of an infection of the system.

  They can be uninstalled later if you wish.

  In 1985, there were 11 known computer viruses.  Today, there is more to 1, 122, 311 and the new threats are detected every day.  Always update your virus definitions before running a scan.

  Restart your computer and solve the outstanding issues.

• STOP: c0000221 Unknown Hard Error\Systemroot\System32\ntdll.dll mean I lost my hard drive?

  Does this mean I lost my hard drive? Do I need to use the ERD? I don't understand not anywhere with F8 or F10, just the message of the screen and stop.

  You have never actually seen, made an effort to replicate it and never actually solved this problem before, have you?

  Give me instructions on how to apply the resolution alleged in the article:

  To resolve this problem, obtain a new copy of the corrupted file or reinstall Windows XP. If you continue to receive one of the error messages that are described in the "Summary" section after you have reinstalled Windows XP, a hardware problem or network may exist.

  Tip: I don't have XP CD and there is no "Summary" on this page.

  It seems that you come to search Bing and post a link to the first MS KB article that appears.

  Don't you think it might be a bad CD/DVD player, a bad cable CD/DBD or little RAM bad?

  Why not unplug/uncable the CD/DVD drive and then see how things work?

  Of course, we don't know if there's a since the forums MS Answers does not prompt for any information system when a new question is asked, but that's what I would say.

• "localizedresourcename = @ systemroot system32 shell32.dll - 21787" error starting

  Hello.. can someone help me? whenever I start my laptop this thing appears. After that. I can't do anything, even stopping. I don't know what to do. This thing pops up even in safe mode.

  (Moved to programs)

  Hello

  If you still experience this issue then I suggest you to follow the steps indicated by HairyFool on June 5, 2013, from the link below and check if it helps you.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/every-time-my-friend-computeros-Win7-starts-the/da8dd4d9-B38B-4b70-AF66-1b41c3e54df3

  Let us know the status of the issue.