What is power/Win32/RegScheduler?

Similar Questions

• Pavilion 6715f: what size power supply can I put too. Flags of HP p6715f

  I would like to know what size power supply, I can go too and if a standard atx power supply will work.

  The upgrade and maintenance Guide
  http://h10032.www1.HP.com/CTG/manual/c01835715.PDF

  NOTE: The ATX Standard PSU is 86 mm height; Width 150mm; 140 mm in length (ATX12V version 2.3 March 2007).
  Third party PSU manufacturers extend the length of Dimension (150mm to 200mm) of high power PSU.

  MEASURE your clearances (for the son out of DC power in case) berries CD/DVD media at this level in case, just in front of the PSU.
  You will find some ATX compatible (140 mm in length) up to about 600 Watts PSU, 160 mm is common with more than 600W POWER supply.

  IF you are thinking of the future motherboard swap (Haswell or higher), make sure your power supply is compatible with the new C6/C7 (Haswell/Broadwell) mode.

• What is Trojan.win32.agent.rzlb?

  Why Trojan.win32.agent.rzlb is in my computer? I can't remove. Help...

  Trojan.Win32.agent.rzlb is a Trojan backdoor annoying infection. He can crawl into our computer without any visible signs of apparent and easily make the pirates to get the information that they break our system.

  There is a simple article that detailed Trojan.win32.agent.rzlb introduced. The effective solution is also provided.

  http://www.anvisoft.com/wiki/2-ways-remove-Trojan-Win32-Agent-rzlb.html

• delete what MSE allowed Win32 Fake Rean

  How can I remove that MSE history shows as authorized Rean Win32 Fake, why is authorized and how to remove

  I can't tell you why MSE has allowed this, I can tell you how to get rid of him. I think that the only way THAT MSE would know he was already on the system.

  How to get rid of it: download and run malicious software tool Microsoft removal and run it. If that does not find it, remove it and then download and run Malware bytes, the links for both are lower.

  Microsoft malicious software removal tool

  Malware Bytes

  I hope this helps.

  Jim

• What is Exploit: Win32 / Pdfjsc.RF, is that a threat?

  Found this on my computer when I used AVG Anti-Virus for the first time: Exploit: Win32 / Pdfjsc.RF

  Should I remove it, or is it for the most part harmless?

  Hello

  all you have to do is Google "Exploit: Win32 / Pdfjsc.RF" for this kind of thing

  top of the list of results, it

  http://www.Microsoft.com/security/portal/threat/encyclopedia/entry.aspx?name=exploit%3aWin32%2fPdfjsc.RF&ThreatID=-2147320980

  http://www.Microsoft.com/security/portal/threat/encyclopedia/Browse.aspx?L=P&page=29

  _______________________________________________________________

  and read this response:

  http://answers.Microsoft.com/en-us/protect/Forum/protect_scanning/how-to-remove-exploitwin32pdfjscrf/d065ca53-EF85-4123-af78-db1a240d10ed?msgId=59bfd226-35E3-4d78-97C9-b046aed1a449

• I don't have the ability to change what buttons power or closing the cover the fact for a samsung? What should I do?

  I go into power options and I click on the CAP going to do and he says that access is denied when I try to change the options, I don't know if it of the computer or the operating system, I'm the admin and I think I have all the updates, the computer is a newer samsung.

  Thank you chris

  I ran the scan several times and it didn't work, I tried to create a new admin account and that no longer works. I think it's just a bug in the operating system that microsoft should be in trouble, and still not sure, if you have any other suggestions that would be greatly appreciated, if not its ok, its more an annoyance than a problem. I only had the computer since 02/10/2011. right now, which is about a week.

  Thanks for the help

  Chris

  You have a new computer. Everything is under warranty.

  Take it to where you bought it and ask for a new, or at least someone to fix it.

  Yopu might have to deal with the manufacturer of the computer instead. I don't know the details.

• What size power supply will fit in a case of dc5750

  I think the upgrade with an AMD Athlon X 2 5800 + processor for socket AM2 ADA5800IAA5DO 3.0 ghz, 1 MB, 2 sticks of 2gig RAM, 2 HARD drives, DVD player.

  Thank you

  dysart22

  dysart22

  I have noted that these two higher end CPU, not the 5800 +.

  AMD Athlon 64 X 2 Dual-Core 5600 + processor 2.8 GHz, 2 front bus L2 cache 2000 MHz MB
  AMD Athlon 64 X 2 Dual-Core 6000 + processor 3.0 GHz 2 X 1 MB L2 cache 2000 MHz bus front

• What is Trojan.Win32.Sirefef

  How can I get rid of this?

  I would start here.
   
  Download the free version of this tool. First check the updates and then run a full scan.
   
  Malwarebytes Anti-Malware
  http://www.Malwarebytes.org/products/malwarebytes_free 
   
   

• What is the maximum power for the hp pavilion a6650f food?

  Hello

  I have a HP Pavilion a6650f running Windows 7 64 bit os. I want to uprade the power. What is the maximum size for my machine?

  Thank you.

  The largest PSU that you can install is a power supply that fits in your case. Is that you can install a 500w unit, unit of 700w. No matter what the power of the PSU is... What matters and is that the limiting factor is the size of the PSU pyshical. Measure the size of your existing plant of PSU and notice the space between it and optical drives... If you get a power supply which, for many, optics and PSU players bump into one another.

  Frank

• Pavilion Elite HPE: Power on password

  I powered up the computer after 4 years of non-use and do not know what the power u [password is? I can reset the motherboard some how? Help, please. I can't find a connecting cable

  You are the very welcome.

  In order to clear the BIOS P/W, please refer to the link below, last position on the page...

  http://support.HP.com/us-en/product/HP-Pavilion-elite-HPE-desktop-PC-series/5035344/model/5036175/document/c02668523/

• HP ENVY 15 Notebook PC J0B65EA: Power button light Doesnt Go Out

  My original OS was Windows 8 and I upgraded to Windows 10.

  When I used my laptop too long and stop it, the power light does not turn off. I always have to press the power button to shut down completely. Any suggetions? Thank you

  Hello

  Try the following.

  Open settings and select System.  Select food and sleep, and then click additional power settings - in the next window, click on "Choose what the power button" in the left pane.

  In the next window, click on "Change settings that are currently unavailable" (close), then Remove the check mark from the box against 'Turn on a quick start (recommended) '.  Click on the button Save the settings, and then close the open windows and restart the laptop.

  When windows has reloaded, download the driver directly from Intel IMEI on the following link, unzip the and run the installer.

  https://Downloadcenter.Intel.com/download/26127/Intel-management-engine-consumer-driver-for-Intel-nu...

  Once the installation is complete, restart the laptop.

  When the machine rebooted, re - activate the quick start and restart the computer once more - let Windows take over completely for a few minutes before checking.

  Kind regards

  DP - K

• SATELLITE PRO L10 POWER ON PASSWORD

  CAN SOMEONE HELP WHAT TO
  POWER ON PASSWORD

  Hello

  I suggest you set the market password in the BIOS.
  I think it s a BIOS password. This password, you can set to secure the connection of the operating system. If this password is set the unit will ask you during the procedure of starting for the correct password.
  Please note: If you have forgotten this password if you do not have the possibility to enter the operating system. In this case only the ASP can remove it.

• sr5717uk power

  Hi guys, I want to update a SR5715UK system with a better video card. I opted for the card (Nvidia GeForce 9400 GT with 1 GB ram) but I need to know what size power supply works with these systems... the map requires 450 w that minimum, any body got no idea what power is installed?

  Thank you very much

  Glenn

  You will need at least a 450 watts that your system has about 300 watts.

• HP Pavilion 17 Laptop: Power light is not out after closing

  HP customer care has tried the following:

  Hard reset, Bios Update, update drivers & software with windows update, power management and system options question Recovery.The persists.  The issue only began after download of Windows 10.

  #ABA product number J9N57UA

  Hello

  Try disabling the startup of Windows 10 hybrid - you can do the following.

  Open settings and select System.  Select food and sleep, and then click additional power settings - in the next window, click on "Choose what the power button" in the left pane.

  In the next window, click on "Change settings that are currently unavailable" (close), then Remove the check mark from the box against 'Turn on a quick start (recommended) '.  Click on the button Save the settings, and then close windows open and stop the laptop by right clicking on the icon in Start Menu, select (Admin) command prompt and click 'Yes' to the uac prompt.

  Type (or copy and paste) the following command (including spaces) and click Enter.

  Shutdown /s /t 0

  Start the laptop and let Windows take over completely for a few minutes before checking if it is now shut down properly in the Start Menu.

  If this has fixed the problem, it may be useful by turning the quick start back on - sometimes simply remove and re-create the file will solve the problem.

  Kind regards

  DP - K

• HP Pavilion 17-f065us: power and buttons f6 (Mute) remain lit after a stop on HP Pavilion 17 - f065us

  I have upgraded to Windows 10 in October 2015 and everything worked very well until about two weeks ago, I noticed that when I would stop my computer Power and buttons f6 would remain lit.  I would go ahead and close the lid of my but next time I would go to to open they would always be lit.  I have to press on and hold the Power button until the lights go out.

  Hello

  Try disabling the startup of Windows 10 hybrid - you can do the following.

  Open settings and select System.  Select food and sleep, and then click additional power settings - in the next window, click on "Choose what the power button" in the left pane.

  In the next window, click on "Change settings that are currently unavailable" (close), then Remove the check mark from the box against 'Turn on a quick start (recommended) '.  Click on the button Save the settings, and then close open windows and stop the laptop by right clicking on the icon from the Start Menu, select prompt (Admin) and click 'Yes' to the uac prompt.

  Type (or copy and paste) the following command (including spaces) and click Enter.

  Shutdown /s /t 0

  Start Notepad and let Windows take over completely for a few minutes before checking if the lights now now disable to stop correctly.

  If this has fixed the problem, it may be useful by turning the quick start back on - sometimes simply remove and re-create the file will solve the problem.

  Kind regards

  DP - K