SATELLITE PRO L10 POWER ON PASSWORD

CAN SOMEONE HELP WHAT TO
POWER ON PASSWORD

Hello

I suggest you set the market password in the BIOS.
I think it s a BIOS password. This password, you can set to secure the connection of the operating system. If this password is set the unit will ask you during the procedure of starting for the correct password.
Please note: If you have forgotten this password if you do not have the possibility to enter the operating system. In this case only the ASP can remove it.

Tags: Toshiba

Similar Questions

  • Satellite Pro L10: BIOS passwords again

    Hello!

    Tonight one of my friends brought me his Satellite Pro L10 and asked me to remove the user password, cose she dislikes grasp every time... OK, it's very simple! -I said. I went to the BIOS with the same password, found the supervisor password option and turn off the power. I could not enter the user password option and left him, thinking I'll fix this later... Well...

    Can you imagine how I was surprised when the system says - password invalid! More... I tried to go back to the BIOS, but system asked me a password... but I deleted "Supervisor password" well, I typed the old one and it does not again!

    Ok. Of course, later, I found the manual for this Satellite Pro L10, I know that it might be preferable to use the Toshiba Console and Toshiba HWSetup could be.

    Tell me, please, supervisor password had priority, and now she has to remember his user password?
    Or there is something else?

    Thank you!

    Post edited by: dimy4

    I studied a bit on the Toshiba knowledge site (it s very useful and interesting) and found this knowledge base article:

    Satellite L10 - setting the BIOS and supervisor passwords
    http://support.toshiba-tro.de/KB0/FAQ5300WK001GR01.htm

    Check it out. Maybe it helps.

    Additional, as I know if is not the BIOS password, you cannot delete it by yourself. Only the service guys are able to remove unknown BIOS password.

  • Satellite Pro L10 boot password is not the same as in HWSetup

    I recently got a laptop Toshiba Satellite Pro L10 by my employer. I entered a password and then confirm the password again in the configuration of HW from Toshiba in Control Panel of Windows XP. Then I clicked on the recommended option. No string or password was displayed in the box under Registered.

    Since then, I was not able to boot up the laptop as the password that I entered Setup of HW is not recognized by the laptop started upward. I tried to type the password with caps lock, shift, and numlock on also. Are there any bugs or fault with defining a password for starting in the HW configuration utility? If there is a fault or a bug I would have preferred that the portable computer password is removed under the guarantee.

    If I have to pay a Service partner.

    Hi Geoff

    On this path, it is not easy to tell what's going on exactly, but I assume that your employer has implemented BIOS password. You can enter the BIOS settings by using the F2 key at startup?

    The BIOS password removal is not part of the guarantee and it must be paid. In my opinion, you must bring the laptop to your employer. He probably has Admin rights and it can set up passwords on the right track.

  • Satellite Pro L10: How to remove the user password

    Hello

    I work for a school and we have a bunch of laptops Satellite Pro L10. I put a supervisor on all laptops password think this problem would be solved (I didn't enter a password each time the machines are enabled), but one of our students seems to have found its way to the HWSetup utility in Control Panel and could save a user password on one of the laptops.

    Alarmingly there seems to be no way to clear the password of the user, even though I have the supervisor password. I can get the BIOS as a supervisor, but the definition of a user password option is grayed out. Can anyone provide a solution for my problem?

    Thank you

    Hello

    Well, I think that this problem could be solved by updating the BIOS to the version 2.60 or greater.
    But the problem is that the password has already been fixed.

    I read in the paper of Toshiba that all passwords must be removed before starting the BIOS updates.
    That's why I think it would be advisable to contact Toshiba service partner to remove first the user password, and then update the BIOS.

    You know it's very risky to update the BIOS of the device when the user or any password has been set.
    It of possible that the BIOS update procedure will be interrupted if the password exists.

  • Can not get my Satellite Pro L10

    I have a satellite pro l10, I tried to put my recovery disk in and she said keeping key c down when I start my computer but it does, nt work, how do I get this drive to work does anyone have an idea, s Please

    Hi James,

    Press and hold the 'C' key is a specific shortcut of Toshiba to allow the laptop to boot directly from the CD. However, you can also select the CD-ROM as boot device in the BIOS, just press the F12 key when you see the Toshiba start screen for power over the process and you will be presented with a menu of the device selection. Tab just down to the CD-ROM and press to enter. The laptop computer should now boot from the CD.

    Kind regards

  • FAN of buzz on my Satellite Pro L10

    After 30 to 60 minutes of work to the fan on my Satellite PRO L10-PSL15E hum early, or else close to her. The buzz stops when I press on the body of the laptop, but only for a short time and then starts again. Need help for sorting!

    Hi Ruslan,

    You can access options from Control Panel-> Performance Toshiba power management and management. Normally, this will show both the Microsoft Options, but also the Toshiba ones.

    Kind regards

  • Satellite Pro L10 cut just randomly

    New satellite Pro L10, with XP Pro and Linux dual boot.

    Randomly, sometimes once a week, sometimes several times on, it will just cut. Just Litrally disable itself (as there is no power?). Occurs in Windows and Linux.

    Subsequently, I constantly press the power button so he can go back on. Yes, fully charged. Occurs when it is connected as well.

    Any suggestions?

    Thank you

    Hello

    For me it's s like an overheating problem.
    If the temperature drops to the critical limit the operating system the device automatically stops.
    The cooling fans simply cleaning with a vacuum cleaner to solve these issues.

  • Satellite Pro L10 battery did not reach full charge

    On my Satellite Pro L10 battery only reaches 85% charge if leave all night. Is this likely to be a problem with the supply power, circuits inside the computer or charge the battery?

    I need to know the best place to start to spend money!

    Some experience that may or may not apply to:
    -Battery system is around 2.5 years
    -The battery lasts about 1 to 1.5 hrs that seems fair considering his age and his level of violence (left connected permanently and not recycled periodically)
    -Very recently would not pass, with or without the power adapter connected. Solved by removing AC, then the battery, running on AC, then turn off and reinsert the battery. Everything now works on battery or AC.
    -Over problem, system has been itself decommissioned at random. Since the resolution of the problem of market it was not randomly turned off itself, YET!

    Any help or advice would be much appreciated. Thank you.

    Chris

    HM, sounds to me like a hardware problem. But the problem is to understand where exactly the error, if you have the following options:

    * Contact a service partner chartered for a hardwarecheckup and an accurate diagnosis of your machine ([http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT])
    * You can buy a new battery (since it could be the battery, I guess)
    * You can sell this machine on ebay and buy a new one :)

    Hope I could give you some new and fresh ideas. There is almost no other options or solutions, the it s so your choice.

    Greetings

  • Satellite Pro L10: USB on and goes off when I try to use the USB modem

    I have a mobile broadband usb t-mobile I want to use it on my Satellite Pro L10.
    When I attach to one of the usb ports then the laptop it is, but it loses then every 10-15 seconds (without interruption).

    I'm on XP Pro and usb Sockets work very well for a USB and a printer.
    I also tried to fix via a hub with external power usb and a pcmcia card with usb port, with exactly the same results.

    It works perfectly on my wifes laptop, it seems to be a conflict or a software problem.
    I flashed the bios and updated as well as seems relevant that I can.
    I continue updating the drivers etc, but in the meantime, I was wondering if anyone had any bright ideas?

    A healthy idea of mind is considered, it is starting to drive me up the wall! Mike

    Hey Buddy,

    T-mobile USB broadband have you? I mean if you could tell us what model you have maybe we can discuss it further. By the way: you said about your wife the USB - stick works machine. What operating system your computer laptop wife´s have?

    Would be interesting to know these facts; either by the way, I think it s more programs given that your material seems fine.

    Would appreciate feedback of your regarding your question.

    Greetings

  • Satellite Pro L10 will feed no, no LED display

    My satellite pro L10 has suddenly stoped working .There seems to be no power "." No leds work by battery or sector.
    can someone help?
    CJ

    Hello

    I recommend first of all check the power adapter and the battery functionality.
    But it s very unusual that these two parts are dead at the same time. So I think that has to be something wrong on the motherboard.
    Unfortunately, it is not easy to say what's wrong without any detailed Diagnostics.

    Therefore, you should ask the ASP to support that in the post above suggested.

  • Satellite Pro L10 does not illuminate

    I have a Satellite Pro L10 and it stopped working yesterday. It won't turn on or charge up. No show of lights on the laptop when the charger is connected. I plugged in another toshiba charger but still no luck.

    Does anyone have ideas on what could be the problem with it and if it is easily resolved. The laptop is about 2 years old. Thanks for your help

    Hello

    Seems not beautiful it is maybe something wrong with the electronic power on the card mother s in this case the motherboard must be replaced to solve this problem

    But maybe you are a lucky guy and only the power adapter malfunctioning Yes, I know that you have tested the laptop with another power adapter, but are you sure that the second captain is supported?

    Anyway, in my opinion, nobody here can provide a solution exactly because without diagnostic tests we don t know what could be wrong
    This is why I recommend to contact the technician of the ASP for a help

  • Satellite Pro L10 and Windows 7 drivers

    Hi guys,.

    I'm looking for a set of drivers for the laptop model above. I recently installed Win7, but I have no drivers for the machine at all.
    XP drivers do not work.
    If someone managed to install the drivers for this machine? I'm mainly interested in getting my wireless card working.

    I look forward to your responses.

    Thanks in advance for your responces
    Panos

    Satellite Pro L10 is old enough for laptop and I do not think that you will find all the Win7 drivers.
    According to the Toshiba - http://aps2.toshiba-tro.de/kb0/TSB9902P50000R01.htm - your laptop isn't supported Win7 and find the drivers won't be so easy.

  • Satellite Pro L10-103 - USB ports not working not

    Hi, my Satellite Pro L10 - 103 USB Ports do not work. I tried different things and finally my Advisor rubbed my computer clean of all programs and operating system. After reloading of the set up disc and having lost my dear some programs I am no further forward. It still does not.

    Anyone know if this means that it is a mechanical problem with the computer? (I use Windows XP). Your help would be greatly appreciated.

    Hey Buddy,

    As wrote Akuma did you use the Toshiba Recovery disk or the Microsoft Windows disk?

    After installing XP, make sure that Service Pack 3 is installed. It contains important updates and can be downloaded on the official page of Toshiba.

    In addition, try to remove all the USB ports on the Device Manager, restart the computer. Ports will still be recognized and ready to use once.

  • Extension memory Satellite Pro L10

    Hello

    I have a satellite Pro L10, which has only 128 MB of RAM. I want to wear this but can't find any information about it in the manual.
    I would like to know,

    How much RAM, I put in the L10?
    What type of RAM the L10 take?
    It's like a stick or two?
    Where can I buy this type of RAM?

    concerning

    David U

    Hey there,

    It has no internal memory, 2 locations available, 128 or 256 MB at 1 location, PC2100 DDR - RAM 333 MHz, 1024MB max

    You can buy the RAM from all :) any store on the computer or online from Toshiba.

    See you soon

  • Satellite Pro L10 Memory Upgrade

    Hello

    I have a Satellite Pro L10 Celeron M Processor 360 1.4 GHz / XP HE / 256 MB / 40 GB / 15TFT / DVD-CDRW / OneNote. I wanted to upgrade the RAM, and I noticed that in the manual it says:

    Before installing a new module memory 512 MB do not forget to remove already installed memory modules.

    Does that mean that I can not install a 512 MB module and more the 256 MB is already a total of 768 MB?

    Thanks for any advice,

    Luis

    Hi Luis,.

    The specifications of your laptop indicates that it can accept up to 1 024 MB of RAM. If you have 2 RAM slots, so you can use any combination of modules of RAM as long as you do not exceed the maximum quotes. Of course if you have only 1 RAM slt then you must remove the original 256 MB module before insert you new 512 MB a.

    HTH

Maybe you are looking for

  • Why my tabs have stopped working

    It doesn't matter how many tabs 'Open' my favorites using the first tab, even if I'm supposed to be connected to a new tab. The address for the 1st tab displayed in bars to address all new tabs. A previous question, I noticed that an adds Ask has bee

  • Can I use product Recovery DVD-ROM from the other unit for my Tecra A2?

    My A2 Tectra is so damaged that I want to back to whn he bought. I can't find the DVD_ROM of recovery of product that comes with it. But I got the Toshiba A60 product DVD_ROM recovery.They are all the same or do I have the exact DVD_ROM to A2 TECTRA?

  • Envy 15 t

    Hello HP. I just got (Christmas gift) a new HP ENVY 15t Quad Touchsmart, with 8.1 Windows 64, with Intel Graphics and a 15.6 "1920 x 1080 display. I installed Windows Office and went to shut down the computer. I received a message from windows about

  • Unable to connect on the Microsoft account using computer

    Hi all Assistance required mentioned above mentioned the issue. I'm unable to login when I use desktop but the password works fine when I use other media. Can someone help me

  • I get an error code 0 x 80240036 during the installation of Windows Update.

    had a crash re - installed windows XP Pro, then I tried to download all updates and got this error > error number: 0 x 80240036 The website has encountered a problem and cannot display the page you are trying to view. The options provided below may h