What is the cause of this problem

Similar Questions

• CAPS & NUM LOCK lights don't light up - found the Cause of this problem. 16/02/2013

  HP dear Forum,

  After 15 months of this issue where my CAPS and NUM LOCK lights on my HP-G72t-b00-cto notebook PC will not turn on, I finally found the cause of this problem. 16/02/2013

  Hello paulwayne317,

  You shouldn't need to disable the power management software, but simply adjust to where it is not longer Hibernate.  Take a look at this document, which should help.

  Please let me know if it works.

  Good luck!

• my computer sends e-mails to my mail list which rejects the postmaster. What is the cause of this?

  Unknown to me my computer from time to time tried to send mails to people on my mailing list. These emails are not allowed by the Postmaster who is good, but what is the cause and how can I prevent this from happening?

  Bendgee

  Read more about the Postmaster here.

  http://mail.live.com/mail/postmaster.aspx

• Icons are not activated under the toolbars in an area of about 1 inch. Only enabled if started in Add-on off mode. Disabling separated from the Adds - there is no effect. What is the cause of this selected inactivation of the icons?

  Icons are disabled in a certain area of the browser window. The region starts below the firefox toolbar about 1 inch in length (in the direction towards the bottom) and extends from left to right. All icons in this area are not functional, including those of firefox itself for example the close of favorites in the Sidebar icon.

  The top of the Firefox window is unresponsive, inadmissible toolbars - see problematic extensions

  caused by the toolbar Yahoo - https://support.mozilla.com/questions/890908

  caused by Babylon Toolbar - https://support.mozilla.com/questions/890670

• I continue to receive messages that internet Explorer cannot display the web page. I lose my job. What is the cause for this

  This page is coming all the time and I always lose the work I do because of this

  Can be many things including your anti-virus settings may be incorrect in Internet Explorer, it occurs on all sites, or just a few (or one)?

  Have you tried another browser like firefox?

  It's just start?  and if so do you ave a backup from before the problem to restore?

  This might get more attention in the browsers and email and you can start a new thread here or have a moderator move it for you (they can do when even if they see)

• How can I find out what is the cause of this error in SQL Developer Data Modeler

  Friends,
  
  I am trying to import features in SQL Developer Oracle Designer 10.1.2.3 Data Modeler.
  
  If you need perform the following steps to import:
  
  Template file-> Import-> Oracle Designer-> select connection to the base-> select work area-> select System application-> select an entity-> click Finish-> begins to import
  
  
  During the import process, I see an alert with the message dialog box:
  

  There are errors in import - check Log file 

  Clicking Ok dismisses the alert box, and I see the following summary screen:
  

  Oracle SQL Developer Data Modeler Version: 2.0.0 Build: 584
  Oracle SQL Developer Data Modeler Import Log
  Date and Time: 2010-08-09 14:27:26
  Design Name: erdtest
  RDBMS: Oracle Database 10g
  
            All Statements:           32
            Imported Statements:      32
            Failed Statements:           0
            Not Recognized Statements:      0

  The entity appear in the logical view in SQL Developer Data Modeler.
  
  While they were inspecting the log file, I see the following entry:
  

  2010-08-09 13:50:34,025 [Thread-11] ERROR ODExtractionHandler - Error during import from Designer Repository 
  
  java.lang.NullPointerException
       at oracle.dbtools.crest.imports.oracledesigner.logical.ODORelation.createArcs(Unknown Source)
       at oracle.dbtools.crest.imports.oracledesigner.logical.ODORelation.generate(Unknown Source)
       at oracle.dbtools.crest.imports.oracledesigner.ODExtractionHandler.generateDesign(Unknown Source)
       at oracle.dbtools.crest.imports.oracledesigner.ODExtractionController$Runner.run(Unknown Source)
       at java.lang.Thread.run(Thread.java:619)

  Anyone can shed light on this error?
  
  Thanks in advance for any help you may be able to provide.

  We have identified that objects recovered and on the branches are not considered by the Data Modeler. This bug has been connected (#10022016) and is being implemented.

  What

• whenever I try to send an e-mail via the internet explore the message fails to reach and I get a message saying that outlook windows had stopped working what is the solution for this problem of screen?

  whenever I send a mail via Internet explore, the message fails to pass and I get a saying of window, that microsoft Outlook has stopped working and the system tries to the solution but in vain, no resolution, I need your support online

  Hello

  -Did you change on your computer due to which the question has begun?
  -What operating system is installed on your computer?
  -What version of Outlook and Internet Explorer are you using?

  Suggestions for a question on the help forums

• The line following shell character '-' the cause of this problem?

  Oracle version: 11.2.0.1 release Red Hat Enterprise Linux Server 5.4 (Tikanga)
  
  I have this weird issue several times.
  
  I put several impdp commands in a script shell using ' \ ' character as the indicator of new line (not sure this so-called in the terminology of Shell script)
  
  When I run the shell script below, the second impdp fails with the error below, but orders impdp 1st and 3rd were succesfull.
  

  impdp \'/ as sysdba\' \
  DIRECTORY=DATA_PUMP_DIR \
  DUMPFILE=expdp-prod-WMS-12-Sep-2012.dmp \
  parallel=1 \
  LOGFILE=WMS_SIT-imp.log \
  remap_schema=WMS:WMS_SIT \
  remap_tablespace = WMS_DATA:DEV_WMS_01_DATA \
  
  impdp \'/ as sysdba\' \
  DIRECTORY=DATA_PUMP_DIR \ 
  DUMPFILE=expdp-prod-WMS-12-Sep-2012.dmp \
  parallel=1 \
  LOGFILE=WMS_SIP_SIT-imp.log \
  remap_schema=WMS:WMS_SIP_SIT \
  remap_tablespace = WMS_DATA:DEV_WMS_01_DATA \
  
  impdp \'/ as sysdba\' \
  DIRECTORY=DATA_PUMP_DIR \
  DUMPFILE=expdp-prod-WMS-12-Sep-2012.dmp \
  parallel=1 \
  LOGFILE=TEST_WMS_01-imp.log \
  remap_schema=WMS:TEST_WMS_01 \
  remap_tablespace = WMS_DATA:TEST_WMS_01_DATA \

  nohup threeImports.sh > threeImportsnohup.log &

  error to import second, I got:

  Import: Release 11.2.0.1.0 - Production on Thu Sep 13 05:29:22 2012
  
  Copyright (c) 1982, 2009, Oracle and/or its affiliates.  All rights reserved.
  
  Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
  With the Partitioning, Real Application Clusters, Automatic Storage Management, OLAP,
  Data Mining and Real Application Testing options
  ORA-39001: invalid argument value
  ORA-39000: bad dump file specification
  ORA-31640: unable to open dump file "/u07/wmsdata/expdat.dmp" for read
  ORA-27037: unable to obtain file status
  Linux-x86_64 Error: 2: No such file or directory
  Additional information: 3
  
  
  threeImports.sh: line 15: remap_tablespace: command not found

  I don't understand why I get "unable to open the dump file" because the dumpfile is present and in addition, two other impdp command (1st and 3rd) succeeded.
  
  I do not understand why the script tries to run remap_tablespace as a separate order.
  
  ++++
  Info on the issue very similair, I had last week
  
  Last week, I got very similair question. I put 5 impdp command in a similair script. I don't know if it's a coincidence, , but then also, it was the second impdp failed with the same error.
  The difference, this time, I have no ' remap_tablespace: command not found "error then if.

  And...
  The last line of a declaration of "pursuit" with a backslash (\) DO NOT end!
  8 2

• In g-mail, there is a black box where I want to add an attachment and I can't download pictures from my digital camera. What is the cause of this?

  No changes were made to my system other than updates.

  Gmail is not a Microsoft application. I suggest you only begin to http://mail.google.com/support/.

• What are the causes of error - OR-XNET: the NOR-XNET driver is no longer can communicate with the device.

  Hello

  I use X-NET-PCI8512, OS: Windows 7, C++ (middle of the QT interval).

  I'm pooling of card data (StreamIn member function) to ~ 100 Hz. card reading time (ReadStatus) to ~ 100 Hz.

  After about 40 min (depends on the amount of data in) I get this error:

  (Hex 0xBFF630B2) The NOR-XNET driver cannot communicate with the device. Solution: Make sure that the device was not removed from the computer.

  What are the causes of this error?

  Thanks in advance,

  Aviad

  Hello aviadCielo,

  When you get this error, what does do to make it work again? If you restart your program, start all this work?

  Secondly, what version of NOR-XNET do you use? It's maybe a software problem that could be resolved by upgrading to NOR-XNET 1.6.

  Finally, can you reproduce this problem with a simple program? If so, you can join the program you use?

• What are the causes of the log of user account on missing cursor in Windows XP? I have two trays of office that they have this same problem. If you restart them the cursor returns?

  What are the causes of the log of user account on missing cursor in Windows XP? I have two trays of office that they have this same problem. If you restart them the cursor returns?

  Hi DaddyJeff,

  1. don't you make changes before the show?
  2. are you referring to the cursor in the area of user password on the login screen of Windows?
  3. when the cursor goes missing, the mouse pointer works on screen?

  It is difficult to say what is causing this problem. If the mouse pointer freezes or stops working, then we recommend you to reinstall the mouse. To do this, try the following steps:
  a. sign in to Windows.
  b. Click Start, click Run, type devmgmt.msc, and then click ok.
  c. in the list of objects, expand mice and other pointing devices.
  d. right click on the sub element and click on uninstall.
  e. unplug the mouse and plug it back.
  f. the Device Manager, select an item in the list, click the Action menu, click scan for hardware changes.
  g. check if the mouse is detected, if so, then install it.

  See mouse USB which is connected to a USB 2.0 hub is not detected by Windows XP

  
  Note: if the problem persists, restore the computer to an earlier time. See How to restore Windows XP to a previous state

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Device: usb fax modem; fatal error, what is the cause of the problem?

  using my usb modem-fax, the result is fatal error, the response of the device that I can't send your fax due to an unexpected error, pls help.

  I already installed and installed the device, remove and installed gain but the problem still there, pls help.tnx

  Duplicate the content of the Post-

  USB FAX MODEM FAIL TO PERFORM

  'THE FAX CANNOT BE SENT BECAUSE OF AN UNEXPECTED ERROR' IT IS THE MODEM ANSWER AFTER DIALING THE NUMBER, BUT BEFORE IT WAS OK, PLS TELL WHAT IS THE CAUSE OF THE PROBLEM AND TO SOLVE IT, TNX

  Hello

  
  1. What is the error code when printing / fax fails?
  
  2. What is the brand and model of Fax Modem?
  
  3. use an internal card for your fax and modem functions or an external modem?
  
  4. what was the recent change in hardware or software performed on the computer before the question?
  
  Please follow the links below to solve the problem.
  
  Method 1
  
  Check the compatibility of the device in the Windows 7 Compatibility Center.
  
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&type=hardware&s=fax%20modem%20&OS=32-bit
  
  Note: Check the categories of SOFTWARE and HARDWARE.
  Method 2
  
  Follow the links to help resolve the fax modem
  
  http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-fax-and-scan
  
  Reference, the LEARN Section.
  
  Method 3
  
  Uninstall the program interface for Fax and reinstall it from the manufacturer's website.
  
  Run the uninstall program tool set up to help install questions.
  http://support.Microsoft.com/mats/Program_Install_and_Uninstall
   
  Also follow the instrunctions from the link below.
   
  Solve fax problems

   

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-fax-problems

   

  Applies to Windows 7.
  I hope this helps.

• I have printer color laserjet 5550N having problem with error 59.C0. What is the cause of the error?

  I have printer color laserjet 5550N having problem with error 59.C0. What is the cause of the error?

  Thanks Ray,

  Hello... How can I get the manual download for all the error on any printer laser color spray top of HP range.

  Kind regards

  Monday Nwankwo

• I face a problem in photoshop cc 2015. When I close a tab, then a pop - up massage a problem caused the program to stop working correctly. Please close the program. solve this problem

  I face a problem in photoshop cc 2015. When I close a tab, then a pop - up massage a problem caused the program to stop working correctly. Please close the program. solve this problem

  Try to uncheck 'use graphics processor' in preferences and restart Photoshop.

  

• I can't click on the icons at the top of a site. What is the cause?

  I have firefox and is having a strange problem today. When I'm on facebook, I can't click on the icons at the top. I do not click on the message, friend notifications, location, profile icons and do not click on the one that allows to disconnect. So I can't log out yet. I mean do not click on it is when I put the cursor over these icons, it does not change in the finger. When I left click it in any case, nothing happens. This does not occur in internet explorer, but I want to continue to use firefox. What is the cause? I also noticed that this happens not just on facebook. I uninstalled and reinstalled firefox. I restarted the PC. It did not help.

  The extension of the Yahoo! toolbar reported that causes this problem.

  • https://support.Mozilla.com/kb/troubleshooting+extensions+and+themes