What is the function of the controller board?
Hello!
It seems that two series B as well of the C series have dashboard controllers. What is the purpose of the controller board?
We have the BMC/MMIC for managing the server and read the sensors. The CMC to function as the 'control plan' of the IOM in the chassis. But what made this controller card and why cant I see not before M3 version on the blades?
I've read a few people saying that the controller card is the same as the BMC/CIMC, but why then cisco would write things like: "once the CIMC firmware is upgraded, upgrade the room controller."
And I also found this: "Cisco UCS C-Series M3 rack servers have firmware controller board that controls many functions of server such as eUSBs and connectors e/s. You can activate firmware controller board on these servers in a rack.<- is="" that="" not="" the="" bmcs="" function?="" if="" not,="" why="" is="" this="" function="" not="" usable="" in="" the="" m2="">->
Best regards
Hello
The controller card and MMIC are two different components. Be aware that the BMC/MMIC are identical from a point of view of terminology.
The controllers of the Council is to regulate the voltage to the DIMMS to the ECC/UECC errors. The extent of why wasn't in the m1/m2 line (I think the b230 m2s have controllers of the Commission), the m3 line is when the value has been added.
I hope this helps.
Justin
Tags: Cisco DataCenter
Similar Questions
-
What is the controller of xbox to microsoft for the work of the PC with windows 8?
What is the controller of xbox to microsoft for the work of the PC with windows 8?
Hello
Do you use a wired or wireless Xbox controller?
Yes, you can connect Xbox controller to Windows 8. I suggest you return the item if you use wired Xbox Controller and check if it helps.
Connect an Xbox 360 wired controller to your computer
http://support.Xbox.com/en-us/Xbox-360/accessories/connect-wired-controller-computerIf you use wireless, please refer to the article for more information.
Set up your Xbox 360 for Windows controller
http://support.Xbox.com/en-us/Games/PC-games/Xbox-controller-for-Windows-SetupHope this information helps. Answer the post with an up-to-date issue report to help you further.
-
Hello
What is the controller board? What do I do?
I need to upgrade a UCS field with 12 B200M3 at UCSM 2.2(1b): do I have to upgrade the controller card?
which version is right: 11, 5 or 8?
Any information on edge controller is welcome.
Thx a lot.
ARM
Nicolas.
PS: pictures as an attachment.
Hi delahais,
To answer these questions,what is the controller board? what should I do? Take a look at the link below.
https://supportforums.Cisco.com/document/29806/what-BMC-and-what-are-TAS...
I need to upgrade a UCS field with 12 B200M3 at UCSM 2.2(1b): do I have to upgrade the controller card?
Whenever you upgrade the firmware of your UCS environment is recommend that you upgrade all of the UCS components including the components of the blade as the BMC
which version is right: 11, 5 or 8?
It depends on the version of the firmware that your UCS environment is running. For example, if your ucs environment is running firmware version 2.2 (1) and you have b200 m3 blades you want to select later who is 11.
You can check the correct version by going to the package of blades bundle UCS in UCSM (see attached screenshot)
Let me know if you have any questions, and if this is the information you were looking for.
-
The blades of B200 M4 comes with firmware of the controller Office 7.0 and the UCS Mini comes with the latest code of 3.0 (2 c). Once associated with a Service profile, the firmware controller board 7.0 activation fails. The blade software 3.0 (2 c) comes with the 6.0 Board controller firmware. I downloaded the firmware 2.2(5a) blade server package, so that the UCS to 'see' the firmware 7.0. Then, I changed a bunch of firmware 3.0 (2 c) host to include firmware controller board for the M4 B200 but activation 7.0 still does not work after reboots. Reacknowledging the blades does not change the result. Any ideas?
Michael,
You did the right thing by adding the 2.2.5a firmware.
Were you running CLI activation?
#scope Server X / Y (blade chassis X Y)
# scope boardcontroller
# Display image (this will list all versions of firmware)
# enable force version.0 firmware (Select a version lower than that already running)
buffer validation #.If the foregoing is successful then reset MMIC
Try--->
In the firmware of the political host do not check the controller board for the B200M4 leave the field blank. Then manually activate tab firmware installed in the server.
Kind regards
Saurabh
-
What is the function local folders are used in TB? When should I use/non use?
What is the 'local folders' function does TB? How is it related to the 'archives '. 2015 archives disappear after 2015 or 2016 pop up? Why not just add subfolders Archives rather than 2015 Archives? Documentation on these topics?
Archives and local folders are not related. You can create an Archive folder under "Local folders" account however.
See http://kb.mozillazine.org/Local_Folders and https://support.mozilla.org/en-US/kb/archived-messages for more information.
-
What is the Arch of fire and what is its function?
What is the Arch of fire and what is it ' s function?
Do you mean FileVault?
If so, it is a method of encrypting the data on the hard drive to prevent access to the data by others. It is of first importance for mobile devices that take place around with you rather than office devices that tend to stay in a safer environment.
-
What is Labview function block (- 1 gain figure with a red arrow on the top)
Hi all
I stumbled upon this code, which has a function with-1 figure with a red arrow on the top of gain?
What is this function and where can I find it?
Thank you
-
Hi all
Please refer to the attached 2 pictures, they are similar, just the size is defferent. (pass PNG, 5478 pass. PNG).
But now I try to use IMAQ detect circles to catch the GREEN button. For the PNG pass, it works very well, but for another example, it is still does not detect this button.
I also try to change the curve settings and note that entry, but still no. Another way, I also try to use function IMAQ find circles , but the result is worse that IMAQ detect circles, so give up.
The code is detect the circles.png, copy of block diagram.
So what is the root cause? Thanks for help.
Hi colinzhang,
The extraction of curve so it uniform mode, you can get the result.
-Suggestion, if you want to use the entire image area as KING should get the size of the image, get the rectangle and convert it to the descriptor of KING. (I think this is unnecessary)
-Be careful with the extraction of the plane, u use default color which is the Red plan. In this example, it is fine. but make sure you know what aircraft you are extracting.
s ' Please find vi saved in the 2010 version.
-
What are the functional differences, if any, between MS detours and the alternative open source EasyHook?
https://easyhook.github.IO/index.html
This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)* -
What is the purpose of the function Array Index in the example attached?
Hello
I'm fighting with the Array Index function. I found the attached VI on the OR site which was exactly what I wanted to do, but rather than simply accept that it works and use it, I wanted to understand.
What is the purpose of the function Index of table inside the while loop? If I put a probe on part and on the other, the values are the same, but if I remove the service and connect directly to the > function, I get an error.
I do not understand the tables but I don't understand what is happening here. Any help would be appreciated gratefully.
Thanks in advance.
It is just picking the first reading of the table in the waveform. If it's good enough (I'd take at least the average of N samples), why not cela?
-
What is the name of function pictures below?
Hello
I need to know what is the name of the function below images? I guess that these function is Labview2015. But I have the Version 10.0f2. If there aren't these functions in the 10.0f2 version, what is the reaction of these functions in the 10.0f2 version? Can you help me?
Thank you.1. 2.
3.
4.
5.
6.
Node 1-feedback
2 - Boolean control
3 - unbundle cluster name
4. cluster table (not sure)
5-local the Boolean control variable
6-local variable digital indicator can be
-
What is the function of support biredirectional activate the tab of the printer properties ports?
Back in the day, the printers were an output device only when the computer would simply send your print job to the printer and it would print (or not). Now printers 'reply' to your computer and notify you levels of ink and toner low, paper jams, termination of success/failure, etc. Enable bidirectional support allows the printer to 'reply' to your computer.
HTH,
JW -
Somehow a storage tab expanded appear in c:\ drive properties in windows xp? What is the function remote storage tab?
Hello
- Have the software installed on the computer before the show?
- Have you enabled all services or no changes to the computer before the show?
You can download a page so that we can see exactly what is happening.
http://answers.Microsoft.com/en-us/feedback/forum/suggest/how-to-insert-an-image-into-a-post-at-answers/bdae0306-c3cb-4d31-ace9-7281ea1a8a73For your reference:Remote storage is not available on Microsoft Windows XP, Windows Server 2003, Web Edition, or Windows Server 2003, Standard Edition.What is the removable storage? -
What is the function of the keys filter & stick in PC
Original title: keys to filter/Stick
What is the function of the keys filter & stick into the PC. What is functions of these keys.
Hello
FilterKeys is a keyboard feature that instructs the keyboard to ignore brief or repeated keystrokes. Using FilterKeys, you can also slow down the speed at which a key repeats when you hold.
For more information visit:
To turn on FilterKeys
StickyKeys is designed for people who have difficulties to maintain two or more keys simultaneously. When a shortcut requires a key combination, such as CTRL + P, StickyKeys you press a key amending (CTRL, ALT, or SHIFT), or the Windows logo key () and keep it active until the other touches.
For more information visit:
To change StickyKeys options
-
What is the function of PTC?
Dear friends,
What is the part of the PTC function in the management of the computer...?
Can someone explain in details...?
Help, please...
Thanks in advance
Hi Han_BFY,
IPC is the abbreviation of 'Inter - Process Communication'
It is used to start a logon session, password/user
data before you connect to a share (file/print etc.)"A capability supported by some operating systems that allows a process to communicate with another process. The process can run on the same computer or on different computers connected via a network.
IPC allows an application to control another application and for multiple applications to share the same data without interfering with each other. »
http://www.webopedia.com/index.php/term/I/interprocess_communication_IPC.html
Maybe you are looking for
-
I installed 64-bit jdk7 and same set the new path, but the browser is not identify the jre... only 32-bit jre6u29 works and even which must be downloaded via Setup online... the offline version does not
-
I have an unusual problem on my laptop. Behind the screen there are black marks and these sem to continue to increase. Brands are no longer visible with white or light background. No one knows what causes these brands and how to get rid of them? Than
-
install microsoft security essentials on my computer.
Microsoft Security Essentials says "Windows failed the genuine validation" there is a square that says: Resolve now. When I pressed her, he returned and said I had windows genuine, but I still can't program installed. I have Windows XP. I have not
-
Installation printer A920 all-in-one
I just bought a used, refurbished OptiPlex 755 PC with Win 7 OS and am trying to install my all-in-One A920 printer. This is the printer that came with (my Dell Dimension 2400 series) desktop I bought about 7 years ago. I downloaded and installed (or
-
List drop-down list of reading value
Hello I have a button and a drop-down list in the next row under drop downgrade, at the click of the button, I want to display value based on the drop-down list. Is there a way to read/extract value from list as and when the user click on it. I don't