Controller board and B200 M3

Similar Questions

• Activation failed for controller board B200 M4 7.0 with UCS Mini 3.0 firmware (2 c)

  The blades of B200 M4 comes with firmware of the controller Office 7.0 and the UCS Mini comes with the latest code of 3.0 (2 c).  Once associated with a Service profile, the firmware controller board 7.0 activation fails.  The blade software 3.0 (2 c) comes with the 6.0 Board controller firmware.  I downloaded the firmware 2.2(5a) blade server package, so that the UCS to 'see' the firmware 7.0.  Then, I changed a bunch of firmware 3.0 (2 c) host to include firmware controller board for the M4 B200 but activation 7.0 still does not work after reboots.  Reacknowledging the blades does not change the result.  Any ideas?

  Michael,

  You did the right thing by adding the 2.2.5a firmware.

  Were you running CLI activation?

  #scope Server X / Y (blade chassis X Y)
  # scope boardcontroller
  # Display image (this will list all versions of firmware)
  # enable force version.0 firmware (Select a version lower than that already running)
  buffer validation #.

  If the foregoing is successful then reset MMIC

  Try--->

  In the firmware of the political host do not check the controller board for the B200M4 leave the field blank. Then manually activate tab firmware installed in the server.

  Kind regards

  Saurabh

• Compatibility of controller for the B200 M3 Board

  Can someone check its compatibility with controller board for a B200 M3 server work us to the 2.1 (3d) version of the firmware and have just received new blades. They came to the same version of firmware, but the controller board is at version 13.0 while all other servers in the environment are to version 11.0.

  I get an error that the service profile cannot be filled by the Board of Directors-updated controller not supported...

  Thanks in advance.

  Maybe its related to

  https://supportforums.Cisco.com/discussion/12265636/Board-controller-not...

  Controller board can not low rating from 13 to 11.

  Can you please send the error message!

• What is the function of the controller board?

  Hello!

  It seems that two series B as well of the C series have dashboard controllers. What is the purpose of the controller board?

  We have the BMC/MMIC for managing the server and read the sensors. The CMC to function as the 'control plan' of the IOM in the chassis. But what made this controller card and why cant I see not before M3 version on the blades?

  I've read a few people saying that the controller card is the same as the BMC/CIMC, but why then cisco would write things like: "once the CIMC firmware is upgraded, upgrade the room controller."

  And I also found this: "Cisco UCS C-Series M3 rack servers have firmware controller board that controls many functions of server such as eUSBs and connectors e/s. You can activate firmware controller board on these servers in a rack.<- is="" that="" not="" the="" bmcs="" function?="" if="" not,="" why="" is="" this="" function="" not="" usable="" in="" the="" m2="">

  Best regards

  Hello

  The controller card and MMIC are two different components. Be aware that the BMC/MMIC are identical from a point of view of terminology.

  The controllers of the Council is to regulate the voltage to the DIMMS to the ECC/UECC errors. The extent of why wasn't in the m1/m2 line (I think the b230 m2s have controllers of the Commission), the m3 line is when the value has been added.

  I hope this helps.

  Justin

• After you have installed windows 10, I can't use apple wireless key board and mouse magic. any solution

  I am facing a strange situation. I used Win7 on BootCamp. Last week attempted to upgrade to Win10. After the upgrade is perfect, I could not connect to the wifi or wired internet. called the Apple support, Windows supports, no one would help you. Downgraded to Win7, after decommissioning, apple wireless key board and mouse magic does not work. Called Apple support, after nearly 90 minutes of interaction with them, ZERO, no solution result. Apple support told me that an Apple engineer will call me at my appointed time. A call came, but no one answered.

  So, today did a clean install of Win10 through BootCamp. All right, BUT I still can't use apple wireless key board and mouse magic. Can someone help me with this situation? Apple & Microsoft support engineers have failed to help out me. Thanks in advance.

  Have you installed the Boot Camp Windows Support software?

  If you do not see some Mac functionality if you are using Windows on your Mac - Apple Support

• USB controller drivers and controller for HP Envy 17 SMBus

  Dear all,
  
  I have big challenge trying to locate and install the drivers for the USB controller and SM Bus for my HP Envy 17 controller.
  Recently they start causing problems and the message in the properties device manager says that the drivers are not installed, I am on Windows 7 Ultimate (64).
  
  Thanks in advance.

  Dusan

  You are the very welcome.

  First install the smbus controller driver and restart.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-89304-1&cc=us&DLC=en&LC=en&OS=4063&product=5093438&sw_lang=

  Then install the driver of the usb3.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-94241-1&cc=us&DLC=en&LC=en&OS=4063&product=5093438&sw_lang=

• measure the angular speed, angle and trigger using a gyroscopic sensor breakout board and LabView data acquisition

  How to measure the angular velocity, the angle and trigger using a gyroscopic sensor breakout board and LabView data acquisition?

  There is a single channel data acquisition code which measures the angular velocity, angle and flexibility using a gyroscopic sensor breakout board and acquisition of LabView data attached to this, I need a help to creat two-channel data acquisition code?

  Hello

  Attached is a vi that you can use in order to read the measured angular position of an encoder.

  If you need more examples on the tasks that you can develop with NOR-DAQmx and LabVIEW, you just need to open LabVIEW and click Help > find examples > Input and Output material > DAQmx > entry counter.

  Kind regards

• HP Pavilion G4 1042TX Ethernet controller drivers and drivers PCI Communication controller

  I have the notebook above but I can't connect to the Internet with an ethernet cable connected from this laptop to my router.

  In Device Manager, it says to the two yellow triangles with a «!»

  Where can I find the drivers for them?

  On the page drivers I see many riders, but no driver ethernet.

  I have Windows 7 32 bit.

  Thanks in advance.

  Hello

  To solve the problem with:

  • Controller Ethernet download and install this driver.
  • PCI Communication controller, download and install this driver.

• Problem in BBM blackBerry Smartphones - I do not have a display picture bbm Board and the State. I cannot access it and cannot access my photo or status of the contacts Panel

  I don't have a display picture bbm Board and the State. I cannot access it and cannot access my photo or status of the contacts Panel. Help, please!

  Thank you!

  Then you can try upgrading the BBM to the latest version available for your device?

  Make that first make a local backup of your BBM contacts, after backup, delete or uninstall any existing version of your BlackBerry. On your home screen, go to Options > Advance Options > application > BlackBerry Messenger > delete BlackBerry Messenger of this list (highlight BBM press on the menu key and select delete)

  KB10040 : How to view or delete the application installed on a blackberry smartphone 

  Once it is perform a battery pull reboot by removing the battery while your unit is powered, wait a min, then reinsert back.

  Finally, after the reboot, use your BlackBerry browser and go to www.blackberry.com/bbmdownload and download the latest available for your device.

  _______________________________________________

  Please note :

  If you encounter BBM7 or higher then your BBM Contacts are integrated into your BlackBerry ID after installation when you log in with your BlackBerry ID Contacts is restored back, but if you experience any previous Kathy then first make a backup local, you can save on your press card, see this KB for additional assistance

  KB20554 : How to back up and restore the BlackBerry Messenger contacts list

• Can we install the controller HCK and the Studio of virtual of Windows 2008 R2 Hyper-V machine which has Windows 2008 R2 operating system

  Hello

  I just doubt about installing controller HCK and Studio facility. According to the prerequiesties, HCK controller isn't hypervisor support on Virtual PC or any third party.

  But is it compatible with the R2 2008 or 2012 VM in Hyper-V that was 2008 R2 OS installed?

  Thank you

  Hello Deborah,.

  The question you posted would be better suited for COMPUTING public Pro on TechNet. I would recommend posting your query in the TechNet Forums to get help:

  Forums Windows Server Hyper V TechNet

  Let us know if you need help with Windows related issues. We will be happy to help you.

• Illustrator Story Boards and sizes?

  In Adobe Illustrator cc 2015, can I create several different storyboards in a single file and making each story a different size on board and save or export each storyboard as if it was it's own file?

  Thank you.

  Yes, they are called work plans, and you can make them different sizes.

  The size maximum is 227.54 ", but with vector graphics, you could design to scale the final size and still maintain the quality of maximum resolution. I know it's more size that most people need, but I just wanted to mention for people of graphics on a large scale.

• Updated table controller drivers and Firmware at boot from a SD card?

  I am in the process of upgrading vSphere 5.1 to 6.0.  All our ESXi hosts boot from SD cards and do not use table controllers local (they don't even have disks).  We had internal discussions on the need to update table controller drivers and firmware on our ESXi hosts if we do not use the table.  Those who are drivers update are firmware are concerned by the potential problems when the operating system scans the controller (either on boot for when looking for the new volumes) If firmware or drivers have been written for vSphere 4.1.  Those who are against the update drivers and firmware think that since there is no disc no problem.

  VMware has specific recommendations?

  What do other drivers of controller of berries on systems that do not use the local drive (i.e. boot from SD SAN cards, Auto deploy,).

  Thank you.

  P.S., We use servers HP Proliant DL and BL series, but I guess that would apply to any provider.

  VMware and HP support told me that if the device should not be used, then the drivers and firmware will not be updated.  We played with the idea to disable the array controller in the BIOS, but finally we decided to stay with our standard process do not update table controllers.

• Due to a hardware problem, I had my logic board and replaced hard drive. How can I do to reactivate older versions of adobe products? (Acrobat, Illustrator and Photoshop)

  Due to a hardware problem, I had my logic board and replaced hard drive. How can I do to reactivate older versions of adobe products? (Acrobat, Illustrator and Photoshop)

  Old version download apps:

  CS 6:

  https://helpx.Adobe.com/x-productkb/policy-pricing/CS6-product-downloads.html

  On the same page, you will have the possibility to download other versions.

  

• I accidentally hit the wrong command on my key board and now forms are white and black outlines. How can I change the forms to their original colors?

  I accidentally hit the wrong command on my key board and now forms are white and black outlines. How can I change the forms to their original colors? (I do not change the color of shapes, I think that I just changed it in some weird setting)

  Figured it out! It was in 'outline' mode I went to view > preview and are back to normal.

  How can Illustrator Adobe - I get out of the preview display? -Graphic design change battery

• ESXi will work on any mobo if I don't care RAID on board and NIC?

  I am a user of ESXi and have used the ultimate Whitebox site in the past to confirm my purchases of equipment.  I'm about to build another ESXi host, a member of the family, but the ultimate site Whitebox does not appear to be updated with new motherboards, or if there is, therefore, not very many of them.  My understanding with ESXi, the typical problems of compatibility is the NIC and onboard RAID controllers.  If I don't care about the RAID on board and add a card compatible NETWORK, is it reasonable to expect ESXi 4.1 to run on any CPU and motherboard?

  See you soon,.

  Scott

  that should be fine, try installing and see what part did you fail (I hope not) and buy the necessary parts that is not recognized by ESXi.