What is the main purpose of ERPI?

Similar Questions

• What is the main difference between...

  What is the main difference between the VARIABLE LOCAL, REFERENCE, PROPERTY NŒUD and INVOC. NŒUD?

  Can u show this with an example in a VI using all these?

  (From the help of LV)

  Local variable: http://zone.ni.com/reference/en-XX/help/371361F-01/glang/local_variable/

  Property node: http://zone.ni.com/reference/en-XX/help/371361F-01/glang/property_node/

  Node to call it: http://zone.ni.com/reference/en-XX/help/371361F-01/glang/invoke_node/

  Building VI Server Application: http://zone.ni.com/reference/en-XX/help/371361F-01/lvconcepts/building_vi_server_applications/

  You can also find this information by performing a search in help of LabVIEW on your PC or by conducting a search online help:

  http://zone.NI.com/reference/en-XX/help/371361F-01/

• What is the main difference between the models eprint 3070 and 5510?

  What is the main difference between the models eprint 3070 and 5510?

  Hi Potter1234,

  I think the 5515 is for a different region outside the United States / Canada region.

  

• What is the main funtion of accounting orders

  Hello

  Can someone tell me that,

  What is the main funtion of GANYMEDE orders below

  AAA accounting exec default start-stop Ganymede group.

  orders accounting AAA 1 by default start-stop Ganymede group.

  orders accounting AAA 15 by default start-stop Ganymede group.

  AAA accounting system default start-stop Ganymede group.

  If you have moved some commands at the privilege level 7 locally on the device, then Yes, you must have the order.

  orders accounting AAA 7 by default start-stop Ganymede group.

  Account control run at this level.

  You can do this,

  SH run | I have the privilege

  It should show you the controls moved to privilege level 7.

  Kind regards

  Prem

  Please rate if this can help!

• What is the main difference between IMPORT AND EXPORT

  What is the main difference between IMPORT AND EXPORT using Toad in the production site

  EXP FILE = E:\A\ABC USERNAME/PASSWORD@DATABASENAME. DMP (LOCATION. JOURNAL OF DMP) = E:\A\ABC. (LOCATION. NEWSPAPER OWNER) = USERNAME GRANTS = STATISTICS N = COMPLIANT NONE = Y

  FILE USERNAME/PASSWORD@DATABASENAME EXP = LOCATION. JOURNAL OF DMP = LOCATION. JOURNAL FROMUSER = USERNAME = USERNAME GRANTS TOUSER = STATISTICS = NONE N IGNORE = Y

• What is the main reason for the use of SERIALLY_REUSABLE in your package?

  Hi Experts,

  What is the main reason for the use of SERIALLY_REUSABLE in your package?

  At first glance, the most popular reason seems that some developers forget to close cursors. Therefore, it is a good way to close automatically when your code is stopped during the same session.

  Second, if your business rules require that package variables still need to put the SERIALLY_REUSABLE default values is good for this.

  So, what's your reason?

  Thanks in advance.

  From http://docs.oracle.com/database/121/LNPLS/packages.htm#LNPLS99924:

  After the unit of work (call Server) a SERIALLY_REUSABLE complete package, Oracle database performs the following operations:

  • Closes all open cursors.
  • No free memory (for example, memory for collection and long VARCHAR2 variables)
  • Returns the instantiation of the package to the collection of reusable instantiations kept for this package.

  Explicit cursors in SERIALLY_REUSABLE packages:

  http://docs.Oracle.com/database/121/LNPLS/packages.htm#LNPLS99923

  I would not support using SERIALLY_REUSABLE instead of programming and the cursor's lifecycle management practices.

  > What is the main reason for the use of SERIALLY_REUSABLE in your package?

  If your package uses large amounts of memory in the State, especially in a multiuser environment heavy wherever the memory usage adds up and memory will not clean until the session is closed and the State is not held beyond the call to the package, then there's your use case.

• What is the main difference between "for teams" and "acronym" license?

  What is the main difference between "for teams" and "acronym" license?

  Thak you

  A team license may be designated for use by a number of people.  A single user license can only be used by one person.

• What is the main difference between VMware vSphere 4 and VMware Infrastructure 3

  Hello friends,

  What is the main difference between VMware vSphere 4 and VMware Infrastructure 3?

  Kind regards

  Mustafa Rashid

  Take a look at the following documents, there are so many out there:

  http://communities.VMware.com/community/VMTN/vSphere (there is a new features pdf doc)

  http://blogs.VMware.com/VMTN/vmware_infrastructure_3/

  http://www.VMware.com/products/vSphere/small-business/features.html

  http://www.yellow-bricks.com/2009/04/21/vSphere-linkage/

  Here twopages which shows some of the different features and takes what licenses are supported which: http://www.vmware.com/products/vsphere/buy/editions_comparison.html and http://www.vmware.com/products/vi/buy.html

  Yet once if you just browse some of these links, you will get everything you are looking for and the wait is the product GA will tomorrow so look on release notes, etc.

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  repository scripts vGhetto

  http://Twitter.com/lamw

  If you find this information useful, please give points to "correct" or "useful".

• HP Officejet 8600 8600 vs. more - what are the main differences?

  We currently have a Canon Pixma MP-480 & he served us very well for about 4 years, but now I have to find a new.  I've been looking at HP as I understand it the price for consumption of ink is low etc..  Is currently seeking to HP Officejet Pro 8600, I didn't know that there was? versions of 8600 etc..  Can someone tell me what the main differences are (except the price of course).  I tried to read several of the reviews & the pros & cons were everywhere in the room.  Most seem quite happy & some certainly were not.  I have a laptop HP & am very happy with it.

  One of the concerns was that we could not send the scanner?  Our old printer, we choose e-mail via our computer on the screen to send something in our scanner?

  Another issue was auto 'duplex' etc.  I understand this means printing 2 sides, but beyond that, I wasn't sure what each of the 8600 printers did or did not.  Could someone explain this part of it, please.

  Thank you

  Hi Sue, take a look through the OJ Pro printer buying guide...

  http://h71036.WWW7.HP.com/HHO/us/en/EP/guides/OfficeJet-Pro-buying-guide.html

  If there is anything else I can help with let me know

  Ciara

• What is the possible purpose of these large audio formats?

  I learn more about the amount of data is actually necessary for high fidelity audio. For as far as I can see, the data files more high quality fit to be worked with and exported to Adobe Audition (CS6) are WAV - PCM and BWF - PCM files as described below:

  Format: Wave PCM (*.wav, *.bwf)

  Type of sample: 192000 Hz, 32-bit

  Bitrate: 24576 Kbps

  Format settings: wave non-compressed, Point 64-bit floating (IEEE)

  Markers and other metadata included

  Sizes of large file estimated, such as 6 min = 1 GB for audio stereo

  Multichannel audio available

  44.1 kHz to 192 Kbps (usually from 16 - bit) is usually the maximum level of audio fidelity. I prefer a minimum of 256 Kbps and 24-bit (32-bit if possible). What is the purpose of these complex audio file formats and?

  Steve.KR wrote:

  44.1 kHz to 192 Kbps (usually from 16 - bit) is usually the maximum level of audio fidelity. I prefer a minimum of 256 Kbps and 24-bit (32-bit if possible). What is the purpose of these large and complex audio file formats?

  Forget speeds - they are irrelevant. You don't need to taste everything faster that 44.1 k because this rate will help you understand all the information present in the signal, up to about 22 kHz. Here's several kHz more than any adult hearing extends. Your ears have a dynamic range which is potentially greater than 16-bit signal, but not for a go. If you start to 0dB (using this as the threshold of hearing), then the subject + 85dB acoustic reflex mechanism kicks in and stops gradually the sensitivity, but allows you to hear sounds with higher levels without damage. But it desensitizes you at lower levels when this happens, then the offer 96dB a linear 16-bit system is more than enough - as has been widely demonstrated by research.

  The point of greater depths of bits has nothing to do with the hearing, but everything to do with the treatment. If you use the 32-bit floating-point system, you can manipulate the levels up and down and even save the results between the two without loss. It will not work with an entire system according to - you lose resolution to the point that save you if attenuate you your signal. With the floating-point system, you can whack it up and down without loss, because the changes are stored in the bits scaled, and data (24 bits) are unchanged.

  The history of all these extended formats is a bit creepy and based on a lot of misinformation propagated by people who should have better, but didn't. It was at this stage a technically sound reason, why some records of highest example sounded "better" - which is doubtful-wall filters of bricks that were used to creating important phase errors in the range of audible frequencies. But now that oversampling is the norm, 44.1 k systems work quite well, as they should do, and there is absolutely no justification whatever the massively high sampling rate unless you save bats. There is no significant musical harmonic content that exceeds about 14kHz, and if you include a lot of harmonic content at higher levels, a large number of listeners is quite disturbing.

• What is the exact purpose of CUSTOM_MODE = FORCE in FND_LOAD while uploadin

  Hello
  Could someone please explain the exact purpose of CUSTOM_MODE = FORCE in FND_LOAD when downloading.
  If it is to replace the object if it already exists in cases where we are trying to download it, then what is the purpose of UPLOAD_MODE = REPLACE-> I guess that's just the Menus.
  
  My scenario:
  1. I have a request pending to DEV and TEST.
  2. I'm going to change the game asks DEV and download it using FND_LOAD (two .ldts for entire request and Req Set links)
  -> Change aura of the change by calling Conc programs in a particular stage
  3. then, I would like to download in the TEST instance, it will modify the existing to the new one. So then should which option I use?
  (Note: all conc programs are in place in both cases)
  
  
  Thank you
  Jules

  Could you explain which "offends Oracle download algorithm" means?
  This means that the object that arleady existed ovverides or algorithms to download will be overrided... ?

  It s on the objects you download (overwrite) and it has nothing to do with the crash of the algorithm. Whenever you download custom objects use this option.

  Thank you
  Hussein

• What is the main difference between Excel Addin and SmartView?

  Hi all
  What is the difference between Excel Addin and SmartView in Hyperion 11.1.2?
  
  Thanks in advance
  
  RSG
  
  Published by: RSG on March 29, 2011 05:42

  If you want the main difference between the Excel add-in and smartview I'd say it's just they way it connects and retrieves the data. the add-in uses the grid api and tcpip and smartview uses java on the web. There are a ton of differences between the supplement and smartview, but as the versions come thay are close. Here are a few others can add to the list:

  ---------------------------------------------------------------------Add-in------------------------------smartview
  works on several office products - no - yes
  Can connect to
  Essbase-----------------------------------------------------------No---------------------------------------Yes
  HFM----------------------------------------------------------------No---------------------------------------Yes
  Planning----------------------------------------------------------No---------------------------------------Yes
  Can view members and aliases at once - Yes - No
  Leaf specific options - Yes - No
  Great shims formatting - Yes - sometimes

• What is the main development tool for designing an Essbase?

  Which are below or other is the main development tool for designing an Essbase?
  1 Essbase Studio Client Console
  2 Essbase Integration Service Console
  3 Essbase Administration Console Service
  
  Essbase Stidio exists only in version 11, EAS can be used to modify a cube for sure, but at the beginning, status to set up a cube, seems we have to use another tool for the design of the Essbase Cube. HIA is the tool for developing the cube from RLDB. But after Essbase Studio appear, seems Essbase Studio is a powerful tool for developing a CUBE, but I can not find the method to create the attriibute dimension and the place to associate dimension attribute of standard dimensions with Essbase Studio Console?
  
  I'm confused, what tool is the most powerful to create a CUBE which include: alias, formula, attribute protected association and UDA years?
  
  Please advise, thank you!

  user2571802 wrote:
  Essbase Studio appears, seems Essbase Studio is a powerful tool for developing a CUBE, but I can't find the method to create attriibute dimension and the place where
  Associate dimension attribute of standard dimensions with Essbase Studio Console?

  Reading of:- Re: Esbase Studio question - how to put in place the protected attribute?

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• What is the main job for project planning?

  Hi, experts: for Hyperion Planning, which is the main works? I'll list some of the jobs, but I can't get the key point, please advise.
  
  1 project migration to other ERP planning project?
  2 dimension building?
  3. train the creation?
  4 financial report develop?
  5. company rule of coding?
  6. loading data?
  7. the task
  ...
  
  For a person who is a developer of planning, which is the responsibility and what is its daily tasks? How much percent of the time on each task?

  Depending on the implementation, one any of them can be time consuming. I would add two scripts more design and calculation (those can be longer depending on the complexity of the implementation. As a developer of aplanning, your responsibility could be one of the tasks according to the skill set of the people working on the project. I wouldn't try to give you sometimes on them as I saw them vary considerably. Sometimes his calc, reports sometimes development sometimes forms development that take the most time.

• If known, what are the main components, or variables that make unnecessary Netflix streaming when Silverlight is to work on other Web sites?

  I uninstalled it, reinstalled, reset all default values, bought new equipment, contacted Netflix, Microsoft, sampled through Silverlight video other sites sampled through my laptop and pc turn to my roommate, but to enjoy.

  What are the other options to get Silverlight to work on my Tower, despite the fact that the application works well on it and for a long time before the current state?

  Hello

  Check in the SilverLight Forums:

  SilverLight - Forums
  http://forums.Silverlight.NET/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">