What is the openal.dll file?

Similar Questions

• What is the apilogen.dll file?

  Yesterday my kaspersky av has detected a virus called "apilogenb.exe " in the system32 and removed the virus. but I also found another file named "apilogen.dll ". Kaspersky does not detect it as a virus, but the similar name was worried. What actually is 'apilogen.dll '? can someone enlighten me with this thing? Thank you

  file apilogen.dll is a legitimate component of Windows Vista.

• What is the msiomq32.dll of file on my computer? I can't locate any information on it.

  What is the file msiomq32.dll is a problem starting it... can't find it on google nothing useful anyway... accept it is a Trojan or a virus, how to get rid of her... full. There is a problem with msiomq32.dll BTWC find given starting module

  original title: what is the msiomq32.dll file

  Scan your PC with these two free utilities

  http://www.Malwarebytes.org/products/malwarebytes_free

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Then run Disk Cleanup

  If still a problem, in msconfig Startup tab, check all entries

• Error - Cannot open because the hal.dll file is missing at startup of Windows.

  Original title: Hal.dll missing.

  When I turned on my comp., he said he could not open because the hal.dll file is missing.  File downloaded from another computer of zip drive and plugged in, but nothing happened.  Now what?

  Hi wendy1960,

  1. What is the full error message that you receive?

  2. don't you make changes on your computer before this problem?

  This problem may occur if the Boot.ini file is missing, damaged, or contains incorrect entries.

  You can follow this link & check if the problem persists.

  "Invalid Boot.ini" or "Windows did not start" error messages when you start your computer

  Hope the helps of information.
  Please post back and we do know.

• What is the difference between files? examples; PDF, http, wps. Why is there a manyand then why do you need different programs to open?

  Original title: files

  What is the difference between files? examples; PDF, http, wps. Why is there a manyand then why do you need different programs to open?

  On Tuesday, February 7, 2012 16:28:19 + 0000, RonaldMatte wrote:

  What is the difference between files? examples; PDF, http, wps. Why is there a manyand then why do you need different programs to open?

  Each file type is in a different format.  The formats are different
  essentially for two reasons:

  1. the files contain any other type of information. For
  example, an mp3 file contains a music and a xls file contains a
  worksheet. The music and spreadsheets are very different things and one
  a unique type of guy would not work for both.

  2. There is also the example of the types of files that are very different, even
  Although basically they both contain the same type of data. For example,.
  a doc file is a file created by Microsoft Word processor (or
  some compatible programs) and a wpd file is a text file
  created by WordPerfect. This is because Word and WordPerfect are two
  very different programs, with very different characteristics. Designers
  and authors of each of the programs designed for a type of file that would be
  works very well with their program.

  Ken Blake, Microsoft MVP (Windows desktop experience) since 2003
  Please reply to the newsgroup

• What is the open file Virtual Machine vCenter web console?

  What is the open file Virtual Machine vCenter web console?

  I have about 20 MV listed here and the rest under VMS.

  Thank you

  Dan

  Records are a method of setting permissions in VMware vCenter. They form a triage unit and behave as a logical separation. When you first add the hosts to vCenter and you have all the files, there will be a default folder created for you as Richardsonporto mentioned.

  Later, you can create new folders and separate the virtual machine by drag-and - drop of their.

• Cannot open .dll files

  After a right-click fault told the resourse file is missing found file but not able to open .dll files

  Hey, Bobby Charlton,.

  Thanks for the question.

  Have you tried to use the System File Checker to see if that will replace your lack. Files/DLL files? You can try this by:

  ·         Click Start

  ·         Click run

  ·         Type cmd

  ·         Click OK

  ·         Enter the command sfc/scannow (you will need to have your XP disk handy)

  System File Checker scans the entire system. DLL files to check to see if there are missing or modified. Any file with a fickleness will be replaced.

  Hope that helps, I look forward to hearing from you.

  Steven
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• While booting XP machine, get error "the application cannot continue because it cannot find the uncdms.dll file.

  just after the start of the desktop windows appears and then I get the error message "the application cannot continue because it cannot find the uncdms.dll file" I searched using windows search, nothing helps.

  Hello

  · Do you remember all the recent changes on the computer before the show?

  · What is the service pack installed on the computer?

  Uncdms.dll file is associated with the Application of desktop search in Windows that is used to find and view an overview of the different types of files, such as documents, e-mail, photos and music files on a computer.

  By default, the uncdms.dll file is located in the folder C:\Windows\System32. The file is more common in 143 872 bytes.

  Follow the methods below

  Method 1:

  To uninstall the Windows Desktop Search from your computer, you must complete the following two tasks:

  Step 1: Remove Windows Desktop Search from the boot sequence

  To do this, follow the steps below:

  a. click on the start menu, click Run.

  (b) in the Open box, type msconfig and press ENTER.

  c. in the System Configuration Utility dialog box, click the Startup tab.

  d. search and clear the check box for any option that is related to Windows Desktop Search or uncdms.dll.

  e. restart your computer.

  Step 2: Uninstall Windows Desktop Search applications

  To uninstall the Windows Desktop Search using the Add / Remove Programs, perform the following steps:

  a. click the start menu and select Control Panel utility.

  b. double-click the icon Add / Remove programs.

  c. in the Add / Remove Programs, locate and select the Windows Desktop Search.

  d. press the button Delete.

  e. restart your computer.

  Method 2:

  Run the verification and virus scan online if any malware or virus detected on the computer activity. You can run the scan for viruses online from the link below: http://www.microsoft.com/security/scanner/en-us/default.aspx

  NOTE: Make sure that you select the correct version of the operating system before downloading the scanner)

• Lsass.exe - Unable to locate component. This application has failed to start because the oleaut32.dll file not found

  Original title: oleaut32.dll xp

  My system XP pro/sp3 does not start normally, without danger or with the original sys disk. I get a message
  Isass.exe - Unable to locate component. This application has failed to start because the oleaut32.dll file not found. reinstalling the application may fix this problem.
  However, I can't in the operating system to do a re-install.
  Any suggestions?

  If c:\windows\system32\oleaut32.dll is missing, you will see messages like this:

  Lsass.exe - Unable to locate component
  This application has failed to start because the OLEAUT32.dll file not found.  Reinstalling the application may fix this problem.

  If the missing file is the only problem, you might have to do a reinstall to fix.

  There should be a copy of Oleaut32.dll in the c:\windows\system32\dllcache folder, so if you can get in the XP Recovery Console, you can just replace it - then you are going to have to start on something to do.

  Once started in the XP Recovery Console, you must enter this command at the prompt:

  Copy c:\windows\system32\dllcache\oleaut32.dll c:\windows\system32

  If the file is not in the dllcache folder (it should really be), depending on your installation, this command can work:

  Copy c:\windows\servicepackfiles\i386\oleaut32.dll c:\windows\system32

  Answered in the affirmative if invited to replace any existing file.

  I don't know what the Microsoft Support Engineer think that KB307545 or KB922371 will help you.  I think that the MSE is just throw a few things to try and some links.  You don't describe symptoms consistent with the need to use one of these methods.   I would say the MSE has never seen this problem before, made no attempt to reproduce the problem, and has no idea how to fix this.

  If your CD does not start in the Recovery Console, or if you don't know what kind of CD do you have to do a CD of XP Recovery Console and boot on it (no media XP required).

  Here's how:

  Boot into the Recovery Console Windows using an XP bootable installation CD.

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  When you install ImgBurn, DO NOT install the Ask toolbar.

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  After replacing the file, remove the CD and type 'exit' to leave the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• How to reverse change how open .dll files?

  How to reverse change how open .dll files? I changed accidentally, trying to open only ONE file, most of them to open with Microsoft Picture It! software and now some things do not load, and my USB ports are completely useless!  Help. How to reverse this mess? OR should I simply delete all these and download replacements? A lot of new files that I downloaded automatically changes in Pic! icons, once that they finish downloading... - and I cannot restore, because he says that nothing has changed.

  Thank you!

  Hello

  I suggest you follow the steps mentioned below.

  Method 1:

  I suggest running the fix that is present in the link mentioned below and check if the problem is resolved.

  How to change or choose the program that starts when you double-click a file in Windows XP

  http://support.Microsoft.com/kb/307859

  Method 2:

  If the problem started recently, so, I suggest you do a system restore and see if the problem is resolved. Follow the steps mentioned in the article below.

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.

• Vista Home Premium SP2 multiple APPCRASH associated the mscorwks.dll file

  Hi, I need help with the following:

  I have several applications crashing (for example: HP Media Smart, HP Health Check, ATI Catalyst Control Center, MYOB GST transitional Assistant), and they all point to the mscorwks.dll file (the same ID of locale and code exception).  The error message is " has stopped working" and it appears before the program even loads.

  Details of error among the APPCRASH s below:

  Signature of the problem:
  Problem event name: APPCRASH
  Application name: NZGSTAssistant.exe
  Application version: 1.7.0.0
  Application timestamp: 4cb7d7e1
  Fault Module name: mscorwks.dll
  Fault Module Version: 2.0.50727.4206
  Timestamp of Module error: 4bf4c6a7
  Exception code: c0000005
  Exception offset: 00076d 55
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 5129

  Description:
  Stopped working

  I did a registry cleaning (twice) with Uniblue registry, I did a complete audit of viruses and malware, and I also did all the latest updates in the hope that the mscorwks.dll/s file would be crushed and fixed.  I initially (a month or two back) had one coming program with this error at startup. I ignored it because I still use the program.  But since then, more programs have been crashes with this error message and now it's interfering with some frequently used programs.  Is there any simple solution for this?  Thank you!

  Hi, I need help with the following:

  I have several applications crashing (for example: HP Media Smart, HP Health Check, ATI Catalyst Control Center, MYOB GST transitional Assistant), and they all point to the mscorwks.dll file (the same ID of locale and code exception).  The error message is " has stopped working" and it appears before the program even loads.

  Details of error among the APPCRASH s below:

  Signature of the problem:
  Problem event name: APPCRASH
  Application name: NZGSTAssistant.exe
  Application version: 1.7.0.0
  Application timestamp: 4cb7d7e1
  Fault Module name: mscorwks.dll
  Fault Module Version: 2.0.50727.4206
  Timestamp of Module error: 4bf4c6a7
  Exception code: c0000005
  Exception offset: 00076d 55
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 5129

  Description:
  Stopped working

  I did a registry cleaning (twice) with Uniblue registry, I did a complete audit of viruses and malware, and I also did all the latest updates in the hope that the mscorwks.dll/s file would be crushed and fixed.  I initially (a month or two back) had one coming program with this error at startup. I ignored it because I still use the program.  But since then, more programs have been crashes with this error message and now it's interfering with some frequently used programs.  Is there any simple solution for this?  Thank you!

  Hey Chellse

  one of the worst things you can do for your computer is to use a registry cleaner

  the best you can expect is that it does not damage

  Run the sfc/scannow command.

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-click guest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  If the sfc finds issues it cannot repair consider to borrow a vista of microsoft dvd and do a repair installation upgrade

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  Walter, the time zone traveller

• HOW TO REPLACE THE MISSING DLL FILES?

  I deleted the 3 DLL files when I deleted viruses from my Vista laptop. I get the windows error that they lack whenever it loads at startup.

  I use a laptop Dell Inspiron 1525 with Vista. I have all the MS updates. I have the OEM DVD supplied with my purchase.

  Any suggestions would be greatly appreciated.

  Thanks in advance.

  What dll? I think that these virus/Trojan dll, which are eliminated by your AntiVirus Tools, inputs registzry satrt them are always present.

  So, run regedit.exe, and then search for dll files and remove entries.

  André

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Windows 7 computer said that the DWM.exe could start not due the windowscodecs.dll file is missing.

  Original title: Windowscodecs.dll missing

  IM using a windows machine 7 and one day, he said that the DWM.exe could start not due the windowscodecs.dll file is missing.

  I don't have to go back, any system restore points

  I ran the/scannow sf in command prompt and it says that the file is corrupted.

  I tried to put the machine in safe mode,

  I tried troubleshooting and software update

  and I tried to download external software to replace the file.

  It also affects the Aero theme, so my background is just a black screen!

  What else can I try that actually work?

  Why we just know it is a virtual machine?  Well...

  Have you looked on your system here to check that the file is actually missing (of course that mine has been replaced):

  

  I downloaded a file called on my OneDrive:

  64bitcodecs.dll (64-bit version)

  The link to my a drive is:

  https://onedrive.live.com/?ID=EC673DF6F8DFEE84%212368&CID=EC673DF6F8DFEE84

  You must visit my OneDrive, upload this file to a place, you can find, rename it to WindowsCodecs.dll and then copy and paste in your c:\windows\system32 folder (assuming that Windows is installed on your C drive).

  When you have done so, check again with Explorer that the file is really there (if it was missing before) and if everything looks good, reboot your system and see what things look like.

• age of empirs 3 the D3Dx9_25.DLL file missing

  hope someone can understand it.

  3 hours trying to solve this problem and im top.

  When I try to start the game the error message appears ip "is missing the D3D9_25.DLL file.

  I tried to download the update to fix, I tried the installation manual and the problem persists.

  I tried to copy and paste the files associated with the program folder age empires only to get a message saying "see the DXERROR.log or DIRECT.log file.

  which is also usless.

  any help would be greatly appreciated.

  Thanks in advance,

  Krzysztof

  Hello
   
   
  Have you followed the steps in KB 910813, which was proposed by Vinod N
  http://support.Microsoft.com/kb/910813
   
   
  Let us know the status of the issue.

• where can I find the niscope_32.dll file?

  Hello:

  the problem is like this: I used the function scope in my program, and then I did it in an executable file. but when I copy it to another computer and run the executable file, it will load the file niscope_32.dll

  but where can I find the niscope_32.dll file?

  You should not just copy the exe to a new pc. You create an installer that not only has the runtime, but the driver NOR-Scope.