What is the volume "unknown"?

Similar Questions

• What is the volume? ------{...}, which shows in defrag.

  What is the volume ------?------{...}, which shows up in defrag. ?

  This is another way to show your partitions.

• What is \\?volume\ which is placed on the dialog to defragment?

  I run Vista and opened the defrag program to run a regular defragmenting the hard drive. I've done several times before and have defragmented the volumes C and D. This time, the dialog box has an unknown volume identified as \\?\volume{c0d0a16f-f527-11df-b405-806e6f6e693}\... What is this volume... where it comes from and how do I get rid of him?

  Hello Michael,

  The guid of the ID<{c0d0a16f-f527-11df-b405-806e6f6e693} should="" correspond="" to="" the="" drive="" within="">

  I guess it can be a player who did not receive a drive letter.

  First of all, we can take a look in disk management:

  1. Click Start and right-click computer.
  2. Choose manage
  3. Click on disk management.
  4. Looking for a drive with a drive letter.

  If it is not present, then we can look in regedit:

  1. Click Start
  2. Choose run
  3. Type regedit and press ENTER.
  4. Click Yes at the prompt of the UAC.
  5. Navigate to the HKEY_LOCAL_MACHINE\SYSTEM\MountedDevices key.
  6. Find the GUID above and see if there is a drive letter associated.

  Let us know if that helps.

  Best regards

  Matthew_Ha

• Checking file system on C: the Type of file is NTFS. The Volume is dirty. -What this means and how do I clean the Volume, please? My computer is Dell XPS

  Recently, when I turn on my computer is starts, guests of the computer and starts check my system files as follows: "checking file system on C: the Type of the file is NTFS. The Volume is dirty. "That is what this means and how can I clean and maintain the clean Volume, please? My computer is Dell XPS

  The computer system continues and invite "CHKDSK checks the files (step 1 of 3)... .

  The system deletes some files and at the end of shows, complete audit files and then show

  CHLDSK is verifying indexes (stage 2 of 3)...

  Once again, it shows the following:

  Deleting Index Entry _64280 ~ 1. jpg in index file 4632 $130

  Deleting Index Entry _64280552_little-mix_211112_get [1] .jpg in index file 4632 $130

  Deleting Index Entry 69gw [1] .jpg in index file 6722 $130

  Remove entries of Index 69 GW_1 ~ 1. jpg in index file 6722 $130

  Deleting Index Entry _64274754_messi_211112_elvis [1] .jpg in index file 6722 $130

  Deleting entry Index _64274 ~ 1. jpg in index file 6722 $130

  Finished the index checking

  CHKDSK is checking security descriptors (stage 3 of 3)...

  100%

  CHKDSK checks usn Journal...

  Windows control disc is finished.

  After all checks, Windows proceed to start as usual.

  I would like to know if I need the dirty Volume, and if so, how can I carry out the cleaning operation.

  Sometimes, at the early stage of the CHKDSK, the computer makes a pe. .. PE... noise and cut.  Then I turn the computer off via the key of the insulation. When I restart the computer, it then runs the check again until the end.

  Please advice me on the following points:

  1 is this normal as he started only happening in recent weeks?

  2. How can clean the Volume in order to show "Volume is clean instead of sale"

  I look forward to hear from you.

  Thank you

  Hi, Dr.,

  Volumes that contain file system errors are known as Sales. To indicate that a file system problem has occurred and that the volume is dirty, Windows XP Professional displays a message similar to the following when you try to open, delete, or rename a file or folder by using Microsoft Windows Explorer or the command prompt:

  Autochk runs if the volume is marked as modified.

  If the file system has marked the volume as dirty, Autochk runs the Startup Repair process. Volumes are marked as dirty, when the file system detects an error on the volume. If Autochk detects a dirty volume, it provides a delay of 10 seconds, and then starts the repair process. If you cancel Autochk when a volume is dirty, Autochk tries to run again after a 10 second delay every time the computer is restarted.

  See Chkdsk for all the necessary explanations:

  http://TechNet.Microsoft.com/en-us/library/bb457122.aspx

  Run the Dell Diagnostics to check the drive failure.  If the disc is a failure, it must be replaced.

• chkdisk-type of file system is NTFS, the volume is dirty, what it means

  When I turn on my computer, I see the following: file system to check on C: the type of the file system is NTFS, the volume is dirty.  What does that mean?

  A volume can be marked as dirty, if the system underwent a power interruption (power failure, pulling plug, removing the battery, button / stop), abandoned restart or an abnormal termination.  One of these events?

  When XP starts, it automatically checks the bit of impurity on each volume.  You can also tell XP to ignore the bit of impurity on any volume, but this probably isn't a good idea in case there is a real problem that needs to be fixed.  If you have a hard drive where the dirty bit will not be deleted, you could tell XP to check everything just do not.

  If the starting XP detects the volume is dirty, it will automatically run the disk with error correction (chkdsk/p) check and try to fix the problems detected.

  You can check the status of your bit of impurity from a command prompt window.

  To do this, click Start, run and enter in the box:

  cmd

  Click OK to open a command prompt window.

  For example, to query the bit of impurity on drive C, type:

  fsutil dirty query C:

  The sample output:
  Volume c is dirty
  Volume C: is dirty

  You cannot use fsutil or chkntfs from a command prompt to delete the bit of impurity on a volume.

  This does not mean that a disk check is scheduled to run, and you can't cancel what needs to happen in this case because this isn't the problem.

  You also won't solve this problem by editing your registry database - not where is the problem.

  Once a volume is marked as dirty, the only way to clear the dirty bit is to run "chkdsk/r" or "chkdsk/p" when the volume is not in use.  The only way a volume can not be used while XP is just starting to load or from the XP Recovery Console.

  If XP will not run chkdsk correctly when your system restarts or the dirty bit will not erase as it should, you need to look in the Event Viewer log chkdsk and see what is happening and fix it.

  If XP will not always clear the dirty bit, you need to run chkdsk/r of the XP Recovery Console so you can look and see what works and run it again until it works.  If your hard drive fails, you may never be able to clear the dirty bit, in this case, you can also say XP never check the afflicted volume dirty bit.

  Saying XP not to check the bit of impurity on a volume would be risky behavior because there would always be some kind of problem with your hard drive.

  When chkdsk runs automatically restart either because XP thinks he needs to (perhaps your NTFS volume has been marked as dirty) or you have chosen to do the chkdsk command yourself, the results appear in the viewing Application event log.  You should look there for the chkdsk log to see what happened and no problems after running chkdsk.

  To view the logs in Event Viewer, click Start, settings, Control Panel, administrative tools, event viewer.

  A shortcut to the event viewer is to click on start, run and enter in the box:

  %SystemRoot%\system32\eventvwr.msc

  Click OK to launch the event viewer.

  Search the Application log for an event originally by Winlogon, something like:

  Event type: Information
  Event source: Winlogon
  Event category: no
  Event ID: 1001
  Date: 04/08/2010
  Time: 11:25:57
  Description:
  Checking file system on C:

  The type of the file system is NTFS.

  One of your disks needs to be checked for consistency. You
  may cancel the disk check, but it is strongly recommended
  that you continue.

  Windows will now check the disk.

  Cleaning of minor inconsistencies on the drive.
  CHKDSK checks Usn Journal...
  Audit of the USN Journal is complete.

  39070048 KB total disk space.
  28017948 KB in 100571 files.
  56540 Ko 10556 index.
  0 KB in bad sectors.
  236440 KB in use by the system.
  65536 KB occupied by the log file.
  10759120 KB available on disk.

  4 096 bytes in each allocation unit.
  9767512 total allocation on the drive units.
  2689780 allocation units available on disk.

  Windows has finished checking your disk.
  Please wait while your computer restarts.

  The dirty bit fade not until chkdsk /r (or chkdsk/p) tracks clean when the system reboots (as in the example) or when you run chkdsk /r from the XP Recovery Console.

  If for some reason chkdsk will not erase the dirty, you say XP never check the bit of impurity of a player, but that will not set your fault of potentially hard drive, or he could be the player just needs have chkdsk to run on it for some other recoverable error condition.

  A simple power interruption is something that could result in a disc was marked as dirty.

  The event log is where you need to look to see what to do about it.

• What is this average, Disk Defragmenter has detected that chkdsk command is schduled to run on the volume: (C). Please run chkdsk /f.

  Been trying to run the defrag on my C drive and this message keeps coming up.

  When you try to defragment a volume of that Disk Defragmenter reports:

  Disk Defragmenter has detected that Chkdsk is scheduled to run on the volume: (c :))
   
  Please run Chkdsk /f.

  This means that the volume that you want to defragment was marked 'dirty' XP.  This is not necessarily all of the data has been lost on the volume, it simply means that XP thinks that the volume should be checked to find errors because of something that happened before.

  You won't be able to defragment the volume until the dirty bit has been removed.

  A volume can be marked as dirty, if the system underwent a power interruption (power failure, pulling plug, removing the battery, button / stop), abandoned restart or an abnormal termination.  One of these events?

  When XP starts, it automatically checks the bit of impurity on each volume.  You can also tell XP to ignore the bit of impurity on any volume, but this probably isn't a good idea in case there is a real problem that needs to be fixed.  If you have a hard drive where the dirty bit will not disappear, you can tell XP not to check.

  If the starting XP detects that the volume is dirty, it will be automatically run the check disk with error correction (chkdsk/r) and try to fix the problems detected.

  If the chkdsk command succeeds, it clears the dirty bit, and then you can defragment the volume.

  You can check the status of your bit of impurity from a command prompt window.

  To do this, click Start, run and enter in the box:

  cmd

  Click OK to open a command prompt window.

  For example, to query the bit of impurity on drive C, type:

  fsutil dirty query C:

  The sample output:
  Volume c is dirty
  Volume C: is dirty

  Is the volume of your sale or it is not dirty?

  Since XP of course already thinking that the volume is dirty, XP will automatically run chkdsk when it restarts to try to clear the dirty bit, in order to plan another running chkdsk can not help you much.  Sometimes the auto chkdsk on a reboot will be not only clear things to the top, but you can try it.

  I would like to start in the XP Recovery Console and run chkdsk /r from there you can actually watch and see what happens and decide what to do about this.  When own running chkdsk/r, it clears the dirty bit unless your HARD drive is somewhat distressed.

• HOW TO TELL (MULTIPLE TRACKS) ON A MUSIC AUDIO PLAYING IN THE SAME SCENE? AND WHAT I NEED TO ADJUST THE VOLUME DURING PLAYBACK OF THE TRACK - OR WHO WILL BE AUTOMATIC AS SOON AS I START THE NARRATION?

  ON MOVIE MAKER - I'M TELLING ON A TRACK THAT PLAYS WHILE THE PHOTOS ARE DISPLAYED.

  1. HOW DO I TELL ON THE MUSIC TRACK PLAYING?

  2. DO I HAVE TO SET THE COLUME ON THE MUSIC TRACK - OR - THE MUSIC WILL AUTOMATICALLY ADJUST ONCE I HAVE START THE NARRATION?

  3. WHEN I FINISH a SEGMENT OF THE MOVIE - AND "SAVE THE PROJECT" - HOW DO I INSERT IT IN THE FILM COMPLETE?

  I HAVE TO SAVE AS WINDOWS MEDIA? WHAT I HAVE TO PUT IT ON A DVD? ... AND THEN INSERT IN MY COLLECTION AND THEN ADD THE FINAL MOVIE?

  PLEASE NOTIFY

  1. HOW DO I TELL ON THE MUSIC TRACK PLAYING?
  =================================================
  Apparently you have imported a file of music to your slide show and you
  want to add narration also. I think would be best to delete
  the music file for now, create your narration, and then replace it
  music file.

  The problem of having two audio tracks playing simultaneously?

  You must save the slide show / narrative as one. WMV Movie file...
  File / save movie file. Then reimport them saved. Just the WMV video file
  as you would for any other video and audio music will be
  clear for you to add your music files. The volume of the tracks can be
  adjusted to... Right click / Volume, drag the slider.

  =================================================
  2 CAN I ADJUST THE VOLUME ON THE PIECE OF MUSIC
  -OR - THE MUSIC WILL AUTOMATICALLY ADJUST ONCE I HAVE START
  NARRATION?
  =================================================
  The removal of the music file will clear this up.
  =================================================
  3. WHEN I FINISH a SEGMENT OF THE MOVIE - AND
  'SAVE PROJECT' - HOW DO I INSERT IN FULLY
  FILM?
  =================================================
  In addition to "Saving The Project" (for the future edition)...
  Save the movie file in the... WMV format.

  Then you can import the saved. WMV video file and
  Use it in a project as you would for any other... WMV
  video file.

  =================================================
  I HAVE TO SAVE AS WINDOWS MEDIA?
  =================================================
  . WMV would be the format of the recorded movie.

  DV - AVI is also an option, but the file size will be much larger.
  I'll add options at the end of this registration message.

  =================================================
  WHAT I HAVE TO PUT IT ON A DVD? ...
  =================================================
  No, just save to a folder on your hard drive.
  =================================================
  AND THEN INSERT IN MY COLLECTION AND THEN ADD
  FOR THE FINAL MOVIE?
  =================================================
  As stated previously, just reimport him. WMV video and use it
  as you would for any other video clip.
  =================================================
  The following article is maybe worth a visit:

  Record a narration in Movie Maker 2 and some of the
  You may encounter problems of microphne.
  http://www.mightycoach.com/articles/mm2/narration-moviemaker2.html

  the following video tutorials may be worth a visit:

  Windows Movie Maker 2 tutorials
  http://www.atomiclearning.com/moviemaker2
  (in the 'I' section there is a clip called: "Narrating your")
  film project")

  More tutorials:

  Articles and tutorials for Windows Movie Maker
  http://www.windowsmoviemakers.NET/tutorials/
  (#2 is Audio / Narration)

  And Movie Makers Forums may be worth a visit:

  Movie Makers Forums

  http://www.windowsmoviemakers.NET/forums/default.aspx

   

  =================================================

  info on savings:

  To save in a .wmv movie file...
  Type of... CTRL + P (or go to...) File / save movie file)
  to open the wizard movie recording.
  
  Choose... My computer.
  Next /.
  Enter a name and a location.
  Next /.
  ICT... "Best quality for my computer.
  Next /.
  Wait while the movie is saved.
  Finishing...

  To save a DV - AVI movie file...
  (and other options)
  Type of... CTRL + P (or go to...) File / save movie file)
  to open the wizard movie recording.
  Choose... My computer.
  Next /.
  Enter a name and a location.
  Next /.
  Show more choices.
  Other parameters.
  Open the window of the droplet and choose... DV - AVI.
  Next /.
  Wait while the movie is saved.
  Finishing...

  In addition, you may find it useful to use
  a custom profile:

  Movie Maker 2 - Save movies - custom WMV profile
  http://www.Papajohn.org/mm2-SavingMovies-CustomProfiles.html

• I have a Dell Dimension with external speakers that worked well until about two weeks ago, when the volume has become about 50% of what it was.

  Next week, the volume got lower and lower, until full volume it is than a bare whisper the sounds and audio.  I checked the Dell and Windows settings and tests and they all report the device working properly.  I bought a new set of speaker - same results.  Theere are no settings mute.  I have no volume icon in the taskbar and when I request I get the message that the sysvol.exe file is not available.  Does anyone have an idea for the fix?

  Hello

  · What is the service pack installed on the computer?

  · Do you remember all the recent changes on the computer before the show?

  Follow the steps listed in the link below: no sound in Windows: http://windows.microsoft.com/en-us/windows/help/no-sound-in-windows

  See also the link that has steps to add the volume icon in the system below bar: Volume icon is not displayed in the notification area, and you may receive an error message when you try to add: http://support.microsoft.com/kb/319095

• My volume button has disappeared and it won't let me choose to put the volume on the taskbar, what should I do?

  I went to Skype, and wanted to put my main upward volume, when I went down to my taskbar, the small button itself had disappeared. I went to the start menu to my control panel and there customizing the taskbar, it let me just select my clock and power. It is stuck on the volume and the network. What the *? Help :(

  Hello

  There are different ways to fix it

  read all the information on the link below

  Try Method 1 or 3, If 1 does not work

  Method 1. :

  1. right click on the taskbar and click Properties.

  2 tab Area of Notification .

  3 check the (on) or disable (off) the options you want or do not want to display on the Taskbar Notification area

  Method of reading 3 etc. in the link below

  How to enable or disable the Notification area system icons in Vista

  http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html

• My windows cannot display the volume on the taskbar control, I think that volume control program is not installed, what should I do?

  My windows cannot display the volume on the taskbar control, I think that volume control program is not installed, what should I do?

  Have you tried the following tutorial?
  http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html

  The tutorial is for Vista, what operating system are you using?

  t-4-2

• Dell Xps 17 straight pregnant L702x a whistling noise + sometimes it loses volume? What is the problem?

  Hello

  I am faced with an irritating problem, I noticed that my right speaker sometimes will decrease volume, and then after awhile, it will return to normal volume / or I believe it loses low, which means that the sounds of the left speaker stronger, then the right speaker. Last night I noticed there was a crackling sound from the right speaker, it wasn't strong, but when the room is quiet then you could hear it. I don't know if the problem is on the right speaker.

  Can someone please guide me to know what's the problem, my warranty just ran out last month so I have to be on what the problem actually is the first

  James192131

  I didn't notice this before but my helmet is loose, for example if I plug my headphones into the Jack, you don't need no strength at all to stick it in and out.

  Maybe you should look into getting an extended from Dell warranty.

  If you ever decide to work on it, you can get the part with the audio of people parts (parts of Dell specialists). They also have the left/right speakers for $15. Their parts are mainly used, but a guarantee.

• I want to disable a program, but it does not appear in the volume mixer. What should I do?

  I would like to watch movies and other videos while playing games on my computer because I have two screens. I so want to put games on mute while I hear whats going on in the film. However, there are some games that does not allow me not completely turn off the sound in the game for example Dirt 3. So I use the mixer to mute volume it but the game does not appear in the volume mixer. What should I do so that I can see the game and mute it?

  Hello Joel Buch, r.
   
  Unfortunately, if you can't cut of in the game you can not do.
   
   

• Windows 7: what are the individual "file system type" files in the system volume information folder?

  Original title: Windows 7: what are the individual "file system type" files in the folder system volume information accumulating [not the files system restore I already know and don't use yet]

  Hi-

  I stopped using the system restore, I found a better solution, for me, that's what I have to do.
  Then I noticed that several 'file system' 'type' was being created, 12 times yesterday, 3 up to today in the early hours of the morning and stored in they System Volume Information folder, anywhere from 30 MB to 2 GB.
  three of these file names 'file system' 'type' are:
  {debb21da-eafc-11e2-ba92-00241dc5d84e} {3808876b-c176-4e48-b7ae-04046e6cc752}
  {3debe675-eaa7-11e2-a462-00241dc5d84e} {3808876b-c176-4e48-b7ae-04046e6cc752}
  {3debe5e8-eaa7-11e2-a462-00241dc5d84e} {3808876b-c176-4e48-b7ae-04046e6cc752}
  Anyone know what it could be?
  Can I follow up to what program/process they are related?
  Are they safe to delete?
  Ideas?  Suggestions?
  Thank you.
  John

  Hi John,.

  Yes, you can delete the system volume information data if not to use the system restore.

  You will need to give permission to the folder until you delete it.

  How to open a file if I get an access denied message?

  Please post with the State of the question.

• What is the initial volume of blackBerry Smartphones?

  What is the setting of the original volume came with the game BrickBeaker? I liked this book, but I changed it accidentally. Thank you.

  Mark

  I had a look at a few different models that were running BrickBreaker and found that the default volume has been set to zero.  I hope this helps.

• What I do when I get this message: there is not enough space left to the location of the cache... Thumbnails and previews are not generated or updated in cache on the disk.  Please leave bridge and add more disk space on the volume of the cache or change

  I don't know what that means:

  "There is not enough disk space to left to the location of the cache...  Thumbnails and previews are not generated or updated in cache on the disk.  Please leave bridge and add more disk space on the volume of the cache or change the location of the cache in the Cache preferences.  Then restart Bridge. »

  I deleted a whole bunch of photoshoots I had on my desktop, but how to make more space here?

  Erica

  Hi Ericacole

  What version of the bridge are you using and what is your OS?

  Please how much is left in your main hard drive.

  By default, the bridge cache is located at: -.

  C:\Users\Yourname\AppData\Roaming\Adobe\Bridge CC\Cache (AppData is a hidden folder)

  Note that cache bridge could be very large depending on your use of the product.

  Please see Troubleshooting of errors, freezes | Adobe Bridge | Windows, Mac OS

  Concerning

  Assani