Have a problem teleworker configuration

Similar Questions

• I bought the new iphone 6 s more and I have not configured, I just opened the phone and charged, but after some time it stop by itself, is this normal or I have a problem with my phone?

  I bought the new iphone 6 s more and I have not configured, I just opened the phone and charged, but after some time it stop by itself, is this normal or I have a problem with my phone?

  You need to activate the phone. There is nothing that the phone can not be activated.

• I have a problem with my iPhone 6 s more battery.  When he arrives less than 30% the phone will stop and will not restart unless I connect it to the charger.  Once it reboots it shows the same battery as the entry stop percentage.

  I have a problem with my iPhone 6 s more battery.  I had to 'support' from Apple telling me there is nothing wrong with the battery, I was at the store and had them test and I had two replacements and they all did the same thing, even to start the replacement up as a new phone so that there are no applications that could contribute to the problem.  I told them repeatedly it was their software problem, but they said they had never "heard of someone having this problem.  I have not updated to the latest version of the software to see if the problem still occurs and initially it didn't, but then he was back at close to 30% or less, even if there is a power adequate to continue much longer.  I've updated to the latest version because it refers to a "correction of battery problems.  Unfortunately, it makes no difference at all.  I had iPhones for many years and have always been a fan, but my next phone will be a Samsung unless Apple admit to their problem and sorting.

  When you've got additional phones you restore from a backup or set up as a new device?  If the first case, then this is probably your problem.

  Restore the configuration as a new device / phone and be on your way.

  PS None of your fellow users on these forums really care if you get a samsung and I don't know that apple will do fine without you as a customer.

• I intend to buy a Apple Watch in the United States, but I have a European iPhone 6 Plus. Anyone know if I have a problem with syncing my iPhone (EU) and the Apple Watch (US)? I think not, but any ideas?

  I intend to buy a Apple Watch, United States of America, but I own a European iPhone 6 Plus device. Anyone know if I have a problem with the sync between devices? I don't think, but it would be more useful to have a definite answer for this as my assumption...

  Hi John

  The devices normally work together.

  There is no difference in the hardware specifications for the watch. It can be configured to use your preferred language and format of the region.

  Adapter USB power to the watch will be located in the United States. To charge your watch via food in Europe, you can use the magnetic charge cable supplied together with a real 5W Apple (iPhone) or 12W (iPad) adapter USB power (or with a third party, Apple certified adapter).

• Problem in configuring the type of columns in a table

  I have a problem with Labwindows 2009
  I want to put a table with two columns, each with a different type.
  I need a numeric column and a string column.
  The problem is that I can't configure each of the types in the Edit menu of the table.
  If I set the type of the first column in the Numeric form, this becomes automatically equal.
  Can someone help me?

  Support persons OR confirmed to me that I want to do in version 2009 cannot be done.
  The way to do it would be to create a column and set it with the desired type. Then delete and re-create and so on for each column that you need.

• Fix KB2518864 & KB2478658 updates will not install and have a problem. How to solve this action?

  Fix updates KB2518864 & KB2478658 will not install and have a problem. How to solve this action? This fix tries to install when arrested computer, but when the computer is turned back on, there is a box which reads:

  Patching HOTIRON Setup has encountered a problem and needs to close. We are sorry for the inconvenience.

  Hi MrGreener,

  1. did you of recent changes on the computer?

  2 are you able to install all other updates on the computer?

  3. do you have security software installed on the computer?

  4. you receive an error message while updates?

  Method 1

  I suggest that you manually download and install updates, check if it installed correctly on the computer.

  Security Update for Microsoft .NET Framework 3.5 Service Pack 1 and .NET Framework 2.0 Service Pack 2 on Windows Server 2003 and Windows XP

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=26323

  Security Update for Microsoft .NET Framework 3.5 Service Pack 1 and .NET Framework 2.0 Service Pack 2 on Windows Server 2003 and Windows XP

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=26427

  See also the articles below to learn more about known issues for both updates and check if it helps.

  MS11-044: Description of the update of security for the .NET Framework 3.5 Service Pack 1 and the .NET Framework 2.0 Service Pack 2 on Windows XP Service Pack 3 and Windows Server 2003 Service Pack 2: Jun

  http://support.Microsoft.com/kb/2518864

  MS11-039: Description of the update of security for the .NET Framework 3.5 Service Pack 1 and the .NET Framework 2.0 Service Pack 2 on Windows XP Service Pack 3 and Windows Server 2003 Service Pack 2: Jun

  http://support.Microsoft.com/kb/2478658

  Method 2

  If the previous step fails then I would suggest that reset you the default Windows Update components and later try to install updates.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Method 3

  If the previous step fails, then it is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• I have a problem with my laptop system restore and I can't open it

  Original title: Please help me
  -----

  Dear friends
  I have a problem of my laptop whit system restore and I can't open it.
  A few days ago, my windows xp reboot both and colud not restart my computer. I had to use my back for recovery system because the other option as in mode without failure or last good configuration didn't ' work corectly.
  This event occure to me several times and I am very confusede on this subject. . I have latest version of avast anti virus in my laptop. Please guide me and give me your solution for my problem towing?
   
  Thank you for your kidness

  What happens and what do you see when you try to open the system restore?

  When you say things "did not work", we need to know which "did not work" means exactly... I get an error message, nothing seems to happen, the system crashes, etc.

  Try answering the following questions, the better you can:

  Maybe someday the dialog box 'ask a question' forums XP will ask these questions automatically when a new thread is started so I don't have to ask every time.  It might even be possible to solve a problem in a single response when enough information is provided.

  Please provide additional information on your system:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  The afflicted system has a CD/DVD drive work?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  What you see you don't think you need to see?

  What do not you think that you should see?

  If the system works, what do you think might have changed since the last time it did not work properly?

• I have a problem when I turn on my computer...

  I have a problem when I turn on my computer. An error that says: "We apologize for the inconvenience, but Windows did not start successfully. A recent hardware or software change might have caused this. "
  And there are 3 options: start windows in safe mode, safe mode with network or start Windows normally. And... If I have the choice between these options my Windows shows this option again and again after loading... How to solve "We apologize for the inconvenience, but Windows did not start successfully. A recent hardware or software change might have caused this. " Problem ?

  lakimedo,
  The first thing, have you changed any hardware or software?   If you added new hardware then delete and restart.  Also disconnect external devices and try to start.  When you start start pressing F8 until you get the Windows startup options.  Then try "Last known good configuration" see if that helps.  If those who do not help, I would start with your XP CD to recovery mode and run "chkdsk/r" then "sfc/scannow".  QQ learn manage!

• Problems of configuration of IPTV, WRT1900ACS.

  Hello. I have big problems getting my IPTV to work with my WRT1900ACS. I'm failry certain that it has something to do with something in the router configuration, but what and where is the question. VLAN? Port forwarding? If I go with my cable ISP directly on the uses of the socket of the TV, it works, but as soon as I go through my router, it doesn't. Everything else works, and after reading about this a little bit on the net, it seems almost obvious that I have to click or configure something in my Smart Wifi of Linksys. I'm a lot of people thought have had these problems and in the hope that they were able to solve them.

  Someone has good directions on where to start? I'll also call support for IPTV, but since signals will be mainly done in the router, my guess is that they will not be able to solve. I'm really grateful for any help I can get. I had so many technical problems the last few months, I don't even start taking place with them here...

  I live and the Sweden and the IPTV provider's Viasat. The box is a Samsung.

  Kind regards

  Thomas

  We are pleased to know that you were able to make it work. If you need our help once again, you know where to find us. Have a good!

• Hard drive crash as possible; If I buy Windows 7, I have a problem installing it?

  Startup problem

  I can't start with Vista.  Download the screen saying enter ctrl-alt-delete.  Unable to restore the system, use backup factory or reinstall the OS from the system CD.  But when I checked before the accident, the hard drive worked OK.  Obviously, corrupted.  My question: if I buy Windows 7, I have a problem installing it?

  It's your BIOS configured to boot from the recovery disc?
  How load BIOS and change Boot ... - Notebooks.com
  If your computer comes with a qualifying previous license such as Windows Vista or Windows XP and the certificate of authenticity is still attached to the machine in good condition, then the COST is reason enough to represent the compliance to the software license agreement. No previous required software installation, which means you can do a clean install with Windows 7 Upgrade disk.

  How to do a clean install with upgrade disc:

  Boot from the Windows 7 DVD
  Click Install now
  Accept the license agreement
  When the option is displayed to select a type of installation, click (Custom advanced)
  Click on drive Options
  Select the disc/s click on Delete
  Click new
  Click on apply
  Click OK
  Click Format, and then click next to proceed with the installation

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

• Recently, when I restart my laptop (dell), I see this error: __Windows (rundll32) host process has stopped working__I do not have this problem since 2 months ago__

  Recently, when I restart my laptop (dell), I see this error:

  Host process Windows (rundll32) has stopped working

  I don't have this problem since 2 months ago

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  What is rundll32.exe and why it works?
  http://www.howtogeek.com/HOWTO/Windows-Vista/what-is-rundll32exe-and-why-is-it-running/

  What is the suspicious Rundll32.exe process?
  http://WindowsXP.MVPs.org/Rundll32.htm

  -----------------------------------------------------

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------

  If no joy trying to determine what is the cause:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG and then display a list of the people here.

  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, product name, file Version, company name, location
  in the registry or file system and more. It allows you to easily disable or remove unwanted programs
  that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• I have a problem with the drag (cursor snap) video and audio stuttering!

  I have an emachine windows vista home edition and have caused problems with the drag (cursor snap) video and audio stuttering.  my hardware configuration includes an HP printer and a video camera from Microsoft with pregnant beyond the keyboard, monitor, and system speakers routine.  Are there updates or the settings that I can apply to correct this problem?

  http://www.eMachines.com/support/drivers.html

  The latest drivers/software for your machine come directly from eMachines.

  Click the link above for them.

  See you soon.

  Mick Murphy - Microsoft partner

• I have a problem connecting the Netgear model No. RPV3000 Extender. So I can not see my network_EXT computer and therefore cannot link to this Netgear

  I'm AT & T PACE router connected to Internet. However, I have a problem connecting the Netgear model No. RPV3000 Extender. So I can not see my network_EXT computer and therefore cannot link to this Netgear. I tried to use another network with the name of my network_ext and provide the same passkey that my router, but it was impossible to connect to the Extender.

  I would appreciate it, if I can get any suggestion/help to bind and connect to this extension of NETGear. I have WIndow7 system on my computer.

  Thank you

  Harshad João

  First, make sure that the netgear device is not a router.  An Extender is very good.  You can't have more than one router in a network.  Also make sure that if you use the router wireless integrated into your modem, the router ONLY in use.

  There is a very specific configuration for the Extender.  It should have come with detailed instructions.  If you can't find them, call Netgear for assistance.

• "Connecting to LAN" doesn't have a valid IP configuration

  Yesterday I just internet browsing and all of a sudden my connection died. I check on my ethernet connection and he says that he is not identified. I started to get many fixes and I couldn't find one that solves my problem. My ethernet connection was initially a public connection until I changed it to a working connection where it still does not work. I also tried to diagnose the "connect to the Local network' and it comes up with"Connecting to the Local network"doesn't have a valid IP configuration.

  IPconfig:

  No IP address is valid:

  Hello Alan,.

  Thanks for posting your question on the forum of the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  1. you made any hardware or software changes on your computer before the show?
  2. What is the brand and model of your computer?

  Thank you to provide detailed information on the issue and your efforts to resolve.

  This problem may occur because of corrupted or incorrect settings of Internet connection.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  IP address to renew and check. Please follow these steps:

  a. Click Start and type cmd in the start search box.
  b. right click on cmd , and then click run as administrator.
  c. type the following commands in the command prompt and press ENTER after each.

  ipconfig/release
  ipconfig / renew

  If this does not help, use method 2.

  Method 2:
  Reset TCP/IP and check.
  Refer to this article:
  How to reset TCP/IP using the NetShell utility
  http://Support2.Microsoft.com/kb/299357

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• I have a problem connecting to the internet. A windows security message appears requesting a user name and password.

  network/security problem

  I have a problem connecting to the internet. A windows security message appears requesting a user name and password. I spoke with my internet provider and they say it's problems with windows. Administering the computer was an old laptop that isn't in use anymore so I can't change the admin settings. Is that what you can offer and do you need more information about me?

  How you connect to the internet, dsl / comcast / wireless.

  The installation disk of your ISP to the main computer, then put it to the top with a modem what ever, after that you can reload the disc of routers and probably have to reset the default password,

  Once you get the configuration of your Internet service provider again then your router again you can re - enter the wireless or wired computers to the new network,