What kind of tables, you can not see from USER_TABLES

Similar Questions

• When I try to play a CD/DVD it works but it does not open the file, you can not see or hear something

  Cannot get the CD/DVD player to play

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• If you have made a purchase before June 27, 2012, you can not see your order history or product due to recent changes to the site keys.

  Hello

  I bought a copy of Windows 8 before 2012. However, the "Web site changes" erasing all purchasing history. I lost the key and order number (its been 3 years..) I need to re - download the product and get the key. The word is supported and they tell me, I need the product key or to a credit card / statement for them to give me my key. Well, its been 3 years, I lost a few since banks debit cards then and changed. I assumed that all purchases of digital media or purchase stories would remain secure through the Microsoft Store or Microsoft Store Website.  Is to find my old credit card number or the old statement of account the only way to get it back? Certainly not I will buy digital downloads from Microsoft in the future. Yes, I lost my windows key that I get it. However, Microsoft seems to have lost my order, the key and purchase history.

  -JMB

  Hello, JMB,.

  Thank you for visiting Microsoft Community.

  I can understand the disadvantages that you have to cross because of the purchase history are erased. Microsoft Sales and support of the team must be able to get out of your recordings with some recognition from your entries.

  I suggest you to contact Microsoft Sales and Support Team for this.

  Sales of Microsoft and support

  http://www.microsoftstore.com/store/msusa/en_US/DisplayHelpContactUsPage

  Hope this information is useful. Do not hesitate to write back for any further assistance with Windows, we will be happy to help you.

• With FileVault and Firmware Lock-> can not see the recovery disk

  I see with FileVault and Firmware now on lock is no longer the recovery disk in the Boot Manager. If it's supposed to happen? I am running the latest version of El Capitan.

  Yes, what is expected. You can always "see" from a Terminal of diskutil list or list cs disktuil order. Thus, instead of having 2 ways to access (command + R, Startup Manager - Option/Alt key) there is 1 way that is command-R.

• Why can not see my uploaded photos thrown windows 8?

  Hello

  I received an e-mail from one of my friends with photos attached to e-mail. I wanted to save my computer. If I click on download and click on the file and click ok. Then, I'm going to open the file and the just blue photo app opens and closes in a blink of an eye and I'm not able to view my photos... And then, in a box gray, he says: 'Windows cannot access the specified device, path or file. You can not have the appropriate permissions to access the file. I am getting very frustrated.

  Hi Celine,

  Thanks for posting your question in the Microsoft Community forums.

  From the description you posted, I understand the inconvenience that you can not see the attached pictures in the email with Photo app and you also get an error message.

  Inconvenience caused to you is unfortunate.

  Follow the steps below and check if the problem persists, prior to this, please answer the questions below.

  (1) are you facing this problem on all the images uploaded to email?

  (2) what is the file format of the images you are trying to download?

  (3) where exactly the image is saved?

  Method 1: Download the image to the desktop and now try to open it.

  Method 2: Right-click on the image, choose open with.

  Select Windows photo viewer and check if the image is opened.

  Method 3: Check if your antivirus software is blocking the file.

  Disable third-party security software

  one) on your computer taskbar beside the clock system...

  (b) you will see the third-party security software icon.

  (c) click the third-party security software, you will see a pop up.

  (d) in this pop and select the option to disable, click on it.

  Now the third-party security software will be disabled.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  I hope this helps. If you have questions related to Windows, please do not hesitate to post. We're here to help.

• Changing table - SQL error: ORA-04091: table XYZ is changing, function of triggering/can not see

  Hi all

  I am a newbie to Oracle and I am faced with the above error. Please see the below code snippets. Can someone please tell what I am doing wrong? Thank you in advance.

  Thank you

  CREATE TABLE ABC

  (

  ID VARCHAR2 ENABLE NUMBER NOT NULL,

  FIELD1 ACTIVATE THE NUMBER NOT NULL,

  FIELD2 ACTIVATE THE VARCHAR2 (8 BYTE) NOT NULL,

  CONSTRAINT JOB_PK PRIMARY KEY (ID)

  )

  ;

  CREATE TABLE XYZ

  (

  ACTIVATE THE NUMBER 4 R_ID NOT NULL,.

  ID VARCHAR2 ENABLE NUMBER NOT NULL,

  Column1 NUMBER (2.0) default 0.00,.

  Column2 NUMBER (2.0) default 0.00,.

  COLUMN3 NUMBER (2.0).

  NUMBER (2.0) TOTAL 0.00 default.

  CONSTRAINT TRIP_PAYMENT_PK PRIMARY KEY (ID)

  )

  ;

  create or replace trigger trigger1

  After Insert on XYZ

  for each line

  Declare

  number of newTotal;

  Start

  newTOTAL: =: new. Column1 +: new. Column2 +: new. COLUMN3;

  setting a day of XYZ together Total = newTotal;

  end;

  Insert into ABC (1, 45, ' Demo');

  insertion in XYZ (1, 1, 12.50, 10.20 33,50, ");

  Error report:

  SQL error: ORA-04091: table XYZ is changing, function of triggering/can not see

  Try one before line

  create or replace trigger trigger1

  before inserting on XYZ

  for each line

  Start
  : new. TOTAL: =: new. Column1 +: new. Column2 +: new. COLUMN3;
  end;

• Hi, I have a question. After installing this program in my (brand Asus k 4 table) the icon of my program its very small and I can not see all of the icons...

  Hi, I have a question. After installing this program in my (brand Asus k 4 table) the icon of my program its very small and I can not see all of the icons...

  What exact version of After Effects you are trying to use? 13.7.1 is?

• ERROR / T_ITEMS in the TABLE is changing, function of triggering/can not see ORA-06512... ?

  Hi all

  I CREATED THE TRIGGER TO CHECK NOM_ELEMENT BEFORE UPDATE ON THE T_ITEMS TABLE IF AN ANOTHER NOM_ELEMENT LIKE NOM_ELEMENT CURRENT OR NOT, IF AS AN ANOTHER NOM_ELEMENT DON'T SAVE UPDATED CURRENT NOM_ELEMENT.

  MY NO IS:

  1 - I CREATED the FUNCTION CALL CH_UNIQUE_ITEM_NAME

  CREATE OR REPLACE FUNCTION CH_UNIQUE_ITEM_NAME

  (NUMBER OF P_ID, P_ITEM_NAME IN VARCHAR2)

  RETURN NUMBER

  AS

  NUMBER OF X_COUNT;

  -FUNCTION "CH_UNIQUE_ITEM_NAME" TO CHECK NOM_ELEMENT LIKE OTHER NOM_ELEMENT OR NOT.

  BEGIN

  SELECT COUNT (ITEM_NAME)

  IN X_COUNT

  OF T_ITEMS

  WHERE ID! P_ID =

  AND UPPER (ITEM_NAME) AS UPPER (P_ITEM_NAME);

  RETURN X_COUNT;

  END CH_UNIQUE_ITEM_NAME;

  2. I CREATED TRIGGER CALL TRG_CH_UNIQUE_T_ITEMS

  CREATE OR REPLACE 'TRG_CH_UNIQUE_T_ITEMS' before FIRING

  UPDATE

  ON T_ITEMS FOR EACH LINE

  DECLARE

  NUMBER OF X_CHECK;

  BEGIN

  SELECT CH_UNIQUE_ITEM_NAME (: OLD.ID,: NEW.) NOM_ELEMENT) IN DOUBLE X_CHECK;

  IF (: NEW.) NOM_ELEMENT DISLIKES: OLD. Nom_element AND X_CHECK > 0)

  THEN RAISE_APPLICATION_ERROR (-20007, "XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX");

  END IF;

  END;

  NOW WHEN I UPDATE ANY ITEMS FOUND ERROR "ERROR / T_ITEMS in the TABLE is changing, function of triggering/can not see ORA-06512.

  

  Please help me TO RESOLVE THIS ERROR. I TIRED TO SOLVE...

  Thank you

  You don't realize that you have just set a UNIQUE INDEX of several columns?

  create unique index index_name_uq on table_name( user#, upper(item_name) );
  

  In addition, a GUI Design point, (using the terms of the APEX) that you want to validate the data before submit you.

  (use a Page-level Validation)

  MK

• Table is changing, function of triggering/can not see?

  Hello
  I had this error before, and I solved it with the help of this forum.
  But I didn't ask then why is - this error happening at all?
  Now I have it again, with different trigger:
  
  ORA-04091: table TRACKER. APPLICATIONS is changing, function of triggering/can not see
  
  My trigger code is:

  create or replace trigger "REQUEST_EMAIL_T2"
       after update of assigned_to_assigned_id
       on requests
       referencing new as new old as old
       for each row
  begin
          if :new.assigned_to_assigned_id != :old.assigned_to_assigned_id
       then
        for emp_rec
         in (select      username, assigned_email, form_name
            from      assigned, form_type, requests
               where  assigned.assigned_id = form_type.assigned_id
                    and assigned.assigned_id = :new.assigned_to_assigned_id
                    and requests.request_id = :new.request_id)
                  loop
             apex_mail.send (
                 p_to          => emp_rec.assigned_email,
                 p_from     => emp_rec.upline_email,
                 p_body     => 'You have been assigned a new Request. '
                                  || CHR (10)
                                  || ' Request: '
                                  || :new.request_id
                                  || CHR (10)
                                  || ' Type: '
                                  || emp_rec.form_name
                                  || CHR (10)
                                  || ' Login: '
                                  || emp_rec.username
                                  || CHR (10)
                                  || ' Pass: '
                                  || '******',
                 p_subj     => 'New Request'
            );
       end loop;
  end;
  / 

  The relaxation will compile without error. The error I get trying to update the table!
  
  I absolutely need to define a trigger as "after" update and need to know how to avoid the same mistake again?
  
  Thank you!

  But I didn't ask then why is - this error happening at all?

  Have you looked at the error message? It is very explicit:
  >
  ORA-04091: table String is changing, the function of triggering/can not see
  Cause: A trigger (or a plsql function defined by the user referenced in this statement) attempted to watch (or modify) a table that stood in the middle of being modified by the statement that shot.
  Action: Rewrite the trigger (or function) so it does not read this table.
  >

  Should this request to join the table of queries ? Does not look like it...

• When you try to crop an image in Lightroom develop I get a blue screen of overlay and can not see the image

  When you try to crop an image in Lightroom develop I get a blue screen of overlay and can not see the image. I uninstalled and reinstalled but same result. How can I get this reset to display the selected image and handles of the crop?

  Go to your Lightroom preferences, the performance tab and uncheck the box "use GPU processor."

• Apple Watch series 2: third-party Applications have control of gps, and exactly what kind of information you get when and after running?

  Third-party applications have control of gps, and exactly what kind of information you get when and after running?

  What I mean is can party like Strava apps or MapMyRun turn on and use the GPS for the courses?

  Also, the default running app, what kind of information you get? During the race, exactly what then I tell me? In addition, exactly what information can I see after I run? I would like to know whether or not she has the cadence.

  Last question: is it easy to verify my info running? Speed and natural lights?

  Thank you!

  Hello

  Information about the integrated training application - including data you can choose to display during training, and where the information is available to see later - are available here:

  • Work with your Apple Watch - Apple Support

  Cadence is not measured by the app to training.

  More information:

  http://www.Apple.com/Apple-Watch-series-2/

• No idea why I can not see any video?

  Thing is there is no matter were I on the web or what kind o video I try to see, it does not work! I installed the latest version of flash player and a few other plugins like VLC, Media Player or Quick Time, all updated! I read some of the solutions but none work. No idea what this could be? I use the latest version of Firefox and I also use Aurora.

  Hello RGOctavian, this is probably due to the recent update of the plugin to version 11.3 adobe flash. It has caused similar problems for many other users.
  You can try to remove flash 11.3 of the section of the configuration/program windows downgrade to an earlier version & Control Panel, until adobe fixes these problems.

• Trigger that avoids "is changing, function of triggering/can not see ' error

  Version Oracle 11.2.0.2

  I have a problem where I try to avoid duplicates in a table using a trigger.  Data looks like:

  EQUIP LO ACCT

  ---------- -- ----

  1000000000 0

  1000000001 0

  1000000002 0

  1000000003 0

  1000000004 0

  Equipment = equipment identifier

  Location = location number

  Acct = account associated with the equipment

  I need avoid the same account to have 2 pieces of equipment are allocated to the same location.

  for example

  EQUIP LO ACCT

  ---------- -- ----

  1000000000 1 1234

  1000000001 1 1234

  1000000002 0

  1000000003 0

  1000000004 0

  I can't create a unique index for this table that when there is no assigned equipment (first example) I couldn't have uniqueness through the location and number.  So, I wrote the following:

  CREATE or REPLACE TRIGGER TEST_TRG before update of test WE acct

  Old SEO AS OLD AS new NEW

  for EACH LINE

  DECLARE

  v_chk number: = 0;

  BEGIN

  Select count (*) in the test v_chk where acct =:new.acct and rental =:new.location;

  IF v_chk > 0 then raise_application_error ("-20001, ' multiple devices at the same location not allowed");

  END IF;

  END;

  /

  .. but of course that I'm shot in the table that is being updated, I get the error of mutation:

  setting a day of test set acct = "1234", location = '1' where equip = '1000000001'

  *

  ERROR on line 1:

  ORA-04091: table xxx. TEST is changing, function of triggering/can not see

  ORA-06512: in "xxx. TEST_TRG', line 4

  ORA-04088: error during execution of trigger ' xxx. TEST_TRG'

  I tried this split into two pieces where a trigger calls another procedure to perform the check and write error, but results were inconsistent and end-user demand does not pick up the error for a reason - it seems to process the transaction very well even if the update was not made at the table level.

  Are there other ways in addition to a trigger to achieve?

  Thank you!

  Adam

  Monty77 wrote:

  ... I can't do this, acct is not a null value, it is ' '.  Right or wrong it is not editable as integrated in application logic.

  Thank you!

  Adam

  Then also consider this value in your index of function according to:

  create table test

  (

  equip the varchar2 (10),

  location varchar2 (2),

  ACCT varchar2 (4)

  );

  CREATE a UNIQUE INDEX TestLocationAcct_UK ON Test

  (case when the ACCT is not null ACCT AND! =' ' then location |) « ; » || end of the ACCT);

  Insert test values ('1000000000 ', ' 0',' ');

  Insert test values ('1000000001 ', ' 0',' ');

  Insert test values ('1000000002 ', ' 0',' ');

  Insert test values ('1000000003 ', ' 0',' ');

  Insert test values ('1000000004 ', ' 0',' ');

  Update test set acct = "1234", location = '1' where equip is '1000000000';.

  Update test set acct = "1234", location = '1' where equip is '1000000001';.

  Error on line 1

  ORA-00001: unique constraint (SYSADM. TESTLOCATIONACCT_UK) violated

  Kind regards.

  Al

  Name of the index has changed to testlocationacct

• can not see the stars of review and comments from clothing sites

  E.g. #1 = 'Landsend.com', click on 'man', 'pants '.
  http://www.landsend.com/IX/mens-clothing/men/mens-pants/index.html?SEQ=1 ~ catNumbers = 1 & 2 ~ 23 & visible = 1 ~ 2 ~ 1 & cm_re = D-4-8 & pageSize = 72

      Can see pants and pictures, but where the usual 1-5 *s are, it says "Rating".  I click on the "Men's Pleat Front Traditional Fit No Iron Dress Twill Trousers" (the first pants picture/option, Item # 426850-A61) and up pops all of the information EXCEPT the photo/s that should be on the left, and the "Views + Reviews" with all of the comments under that.
  

  For example #2 = "underarmour.com', 'Man', 'Accessories', ' Backpacks and bags ', 'AU Hustle Storm backpack.
  http://www.underarmour.com/shop/us/en//pid1238440-040#BV-reviews

      Can see    "****1/2* (2) Read All Reviews"   but the reviews are missing and when I click on "Read all Reviews", the screen moves down, but nothing else changes and the reviews are not there.
  

  For example #3 = "eddiebauer.com', 'Man', 'Shirts',"Classic Fit legend wash Oxford Shirt - solid short sleeve"
  http://www.eddiebauer.com/EB/men/shirts/index.cat

      Under "Men's Shirts", I see the stars and how many people have rated it [ex.- *** (17)].  If I click on the ratings/stars or on " Classic Fit Legend Wash Oxford Shirt - Solid Short Sleeve", the next page shows up-
  

  http://www.eddiebauer.com/catalog/product.jsp?ensembleId=44679 & & categoryId = 9 & categoryName = SHIRTS & pCategoryId = 2 & pCategoryName = MEN & gpCategoryId = 1 & gpCategoryName = EB & catPath = ~ ~ categoryId = 9 ~ ~ categoryName = SHIRTS ~ ~ pCategoryId = 2 ~ ~ pCategoryName = MEN ~ ~ gpCategoryId = 1 ~ ~ gpCategoryName = EB & viewAll = n & pg = 1 & cmPathInfo = null

     ...however, the stars, ratings, and comments are not there.  The picture/s of the shirt are there, as well as the size, color, add to bag, etc.
      On Amazon, I can see the ratings and comments.  This tends to be a problem with clothes companies and their customer service has not been able to tell me why I can't see what should be there.  Internet Explorer Does show the missing info; I haven't tried Chrome.  I want to work with Firefox.  Any suggestions?
  

  On the first page, next to the marking of Word, I get five sailboats (blue is good, gray is not good). This image comes from the external site "landsend.ugc.bazaarvoice.com." You can see the images if you load them directly? Here is an example: http://landsend.ugc.bazaarvoice.com/2008/2_8/5/rating.gif

  When I click through to the pants, the first image that shows on the left is this one: http://s7.landsend.com/is/image/Lands.../426850_AJ13_FF_KHA?fmt=jpeg, rgb, qlt = 80, 1 & op_sharpen = 0 & resMode = sharp2 & op_usm = 0.5, 1, 3, 0, & icc=sRGB%20IEC61966-2.1,relative & iccEmbed = 1 & rgn = 0, 0, 2000, 3000 & scl = 5.882352941176471. If you click on it directly, it works?

  If you are unable to view these images directly, sites can be blocked. Check out the first section of this article: the problems that cause to not show images.

  If you CAN not display these images directly, but not when they are incorporated on the main site of Lands End, you may be blocked "third party" images. You can check here:

  (1) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

  (2) in the filter box, type or paste perm and make a pause so that the list is filtered

  (3) if the value is not 1 (and the line is in bold), click permissions.default.image , then click Reset.

  If the above fails, it could be a problem to Add on. Could you try Mode without failure of Firefox? It is a standard diagnostic tool in order to avoid interference by extensions (and some custom settings). More info: questions to troubleshoot Firefox in Safe Mode.

  You can restart Firefox in Mode safe help

  Help > restart with disabled modules

  In the dialog box, click on 'Start mode safe' (not Reset)

  Any difference?

• Can not see the images of the patent (i.e., D/359 691) on research of patent USPTO.gov, it tells me I need a plugin (7.7.1.0 Quicktime) that I've already updated.

  Can not see the images of the patent (that is, D/359 691) on USPTO.gov patent search, it tells me I need a plugin (Quicktime) that I've already updated.
  In the 'quick search' I give terms & it compiles a list. I have then cross to every doc and look to see the doc and associated drawings. I don't know what to say at this stage.

  Thank you.

  QuickTime cannot handle images in TIFF format.

  You can watch AlternaTIFF - http://www.alternatiff.com/