What laser MFP supports automatic duplex A5?

Similar Questions

• HP laserjet pro M125: hp laserjet m125 does support automatic duplex printing?

  The hp laserjet m125 does support automatic duplex printing? I can only understand how manually to do duplexing so far.

  I don't see anything in the manual mentions automatic duplex. So I think not, manual only.

• Mystery on 1606dn supported sizes of paper for automatic duplex printing

  I'm trying to find out if the 1606dn supports automatic duplex copy legal paper size, but the info is not in the user's manual, which just refers to "that the driver supports. Of course, I cannot and will not install the driver if I do not have the printer, so it's kind of impossible for me to check what paper sizes the driver supports.

  In any case, someone has this information, or is it a secret or something?

  Thank you.

  Hello

  Automatic duplex is supported for legal paper size as you can find targeted by the software's technical reference guide:

  a duplexing unit is installed and manual duplexing is enabled in the driver, the product automatically
  prints on both sides of paper types that are supported for automatic duplexing (Letter, A4, Legal, and
  8.5 x 11 only). For paper types that are not supported for automatic duplexing, a Help message appears
  prompting you to configure the driver settings for manual printing on both sides. Manual printing on both
  sides does not occur automatically.
  

  http://h10032.www1.HP.com/CTG/manual/c01996606.PDF

  See page 224 of the manual above to find how to set duplex printing and paper types are not supported for tasks a

• Color LaserJet CM6040 MFP: A3 manual duplex Duplex on Color LaserJet CM6040 MFP taken in charge?

  Hello

  I hope someone can help to answer this question. I am trying to print a newspaper on the double-sided A3, but I get no prompt to reinsert the paper to print on the other side, as I do when I print A4.

  The parameters have been triple checked and still the A3 prints out sequentialy on one side.

  My question is the Color LaserJet CM6040 MFP support manual duplex Duplex A3?

  Thanks in advance

  JEAN

  The CM 6030 / 6040 CM User Guide manual States:

  «Duplex printing: provides printing automatic duplex (print on both sides of paper).» The range of paper size for automatic duplex printing is 175 to 320 mm (6.9 to 12.6 in.) x 210 to 457 mm (8.3 "to 18"). Media weight range is from 60 to 220 g/m2 (16 to 58 lbs.)"

  If you use manual duplex because the printer driver does not offer the automatic duplex option, it may be that the driver does not know that a duplex unit is equipped.

  The function "automatic detection" used by some drivers on the install (or update) does not always; make sure the driver knows that a duplex unit is present on the printer (assuming that a single is present):

  • For the instance of the printer in question, bring up the printer properties dialogue.
  • Select the device settings tab.
  • Make sure the duplex unit is set to installed and not installed.

  You will probably need to be logged in with administrator credentials in order to change the settings of the device.

• Automatic duplex printing

  I can't get my officejet 6480 to automatically duplex, it stays on manual printing two-sided. Can someone explain how to reset manual for automatic printing with?

  Hello

  I can only contact: it does not support automatic duplex, because he can't have a duplexer.

  http://support.HP.com/us-en/document/c01292007

  If your printer has a duplexer, please, try:

  http://support.HP.com/us-en/document/c01909142

  Kind regards

• LJ Pro M1536dnf MFP: is more duplex

  My LaserJet Pro M1536dnf MFP stopped automatic duplex printing. Once I choose duplex printing and rather fo print on both sides of the paper, the document was printed recto with each page on a sheet of paper. I tested and it will do is more duplex copy either.

  I didn't hear unusual noises or get the error codes.

  Any ideas?  Others have the same problem. Other that this question is a great printer, especially for the price.

  This printer is a replacement guarantee for one who stopped duplexing while in warranty period. The first unit duplex copies always worked.

  Hi John_Mrtz ,

  Thanks for letting me know.

  You can go only with firmware updates. You can rerun the update of the firmware, but probably it will show that it is already updated. I tried the same exact setting, that you used in the laboratory for the Laserjet M1536 and he did the double-faced properly document. It looks like a hardware problem with the device. I am surprised however that the test internal printed duplex test page.

  There is still one thing that we can try reset the printer back to factory settings. I can send you this information in a camera
  Message. In the forum next to your handle name simply click on the envelope to see.

  Thank you.

• HP Color Laser Jet Pro M452dw: no automatic duplexing after update driver

  Installed the updated driver and software M452dw.  I can't print any documents usng the automatic duplex function.  I changed the printer properties from one side of 2 sides, but the feature screen always manual duplex printing.  I have been using automatic duplex printing since I bought the printer in November 2015.  Something must have gone wrong with the update or it does not update correctly.  Suggestions are welcome and/or corrective action to fix the configuration.

  You will need to go to devices and printers and right click on the printer icon and scroll first and left click Properties. Now at the top of the page click on device settings and then scroll down to the duplex of change not installed and installable options at installed and apply and save the settings and it should now work as you wish.

• LaserJet Pro M426fdw MFP: Automatic duplex printing works in 2016 in Word but not in 1 c Enterprise 8

  Automatic duplex printing works in Word 2016 but no 1 c company. When I choose "Print on both sides" in Word 2016 it works as it should. But in the 1 c company it prints 2 pages instead of 1. Can someone explain why?

  The problem is with 1 c Enterprise 8. In version 8.3, it is possible to select two-sided printing in file-> Page Setup. This program doesn't respect changes to the settings of the printer in the print dialog box. You must change the configuration of the default printer in the control panel.

• HP Color Laser Jet Pro CF394A: no option automatic duplexing on M452dw

  When installed first of all print automatic double-sided. After that automatic driver update duplex isn't so more one choice of option is manual duplex or none. Very frustrating. We bought it because of the automatic duplex feature.

  The function "automatic detection" used by some drivers on the install (or update) does not always; make sure the driver knows that a duplex unit is present on the printer (assuming that a single is present):

  • For the instance of the printer in question, bring up the printer properties dialogue.
  • Select the device settings tab.
  • Make sure the duplex unit is set to installed and not installed.

  You will probably need to be logged in with administrator credentials in order to change the settings of the device.

• 6500 power automatic duplex

  I just bought an Officejet 6500 E709n. It came with the duplexing feature (accessory that attaches to the rear).

  I earlier had an Officejet 7310 also having two-sided printing function.

  I am doing with the 6500, what I was doing with the 7310:

  -set the automatic duplex power (so that the ADF (ADF) will read both sides of the sheet)

  -affect printing DUPLEX (so that the printer prints on both sides of the print media)

  -copy a document of duplicate entry in a document to output duplex in the following way:

  -I place a sheet (or a number of sheets) into the automatic document feeder

  -AJD reads the side front side of the sheet and releases it only partially

  -l' print the side front of the sheet and partially released so that it dries

  -the drawee of the duplexer sheet out of back inside

  -pull ADF, the rear entrance to the inside sheet in order to read the entry side back

  -l' prints the side back of the plug provided by the duplexer and it releases completely

  -If the other leaves are in the ADF, the ADF reads the next sheet and the process is repeated until there is no input more

  I know how to set print double-sided on the 6500, but I can't find instructions for reading duplex value.

  I just spent a few hours with the support of cat, which left me hanging at the end asking me to call HP Total Care phone support to the 1-800-474-6836.

  Can you help me?

  The ADF in the OJ 6500 Wireless does not have the capacity automatic duplex. He cannot read the two sides of an original automatically.

• Automatic duplex printing - Photosmart 310 has

  I have a new printer Photosmart Premium e-All-In-One C310a. In highlights eco told me, ' save the document of up to 50% with automatic duplexing.»

  Since I assumed this printer could do that, but I was not able to find out how.

  The seven-page document that comes with the printer isn't really a "user guide". Its more like a summary of features, very few 'how to' save for a step 4 put in place the process.

  The C310a has the ability to print two-sided documents automatically and if so, how?

  Thank you

  Hello Bobst,

  Regarding my info tells me the device supports automatich duplex printing, but needs a duplexor to do. Some models are sold with the already installed duplexor and some models are not. So in this case, you will need to buy a duplexor. TO see if you model has an installed duplexor check the back of the unit. If installed it should look at there is a black brick that comes out of the unit.  Click HERE for more info on this duplexor, its two-sided printing accessory.

• HP 6500 has more - automatic duplex printing

  He bought for a friend, but can not get automatic duplex printing to work. Says it is installed and will allow you to do manual duplex printing! Obviously I'm not the only person who has had problems since that HP has published a directive on XP, Vista and Windows 7 (what we're missing) under the title of "double-sided printing Option is not available, even if an automatic duplex (Duplex) printing accessory is installed.

  Step 1 of this directive can be satisfied. Second stage is from another world! There is No "Features" tab on our menu and therefore we cannot continue!

  Can someone in the HP please look into this as soon as possible, because they have a very dissatisfied customer who lives about 85 miles away from me. Any help would be appreciated.

  Interestingly, even if the duplex option is installed and confirmed installed, when you go to print options and watch the finish tab - no duplex is shown?

  Concerning

  Brian Cameron

  Hi all

  This is wht I want to do:

  (1) in the printer setup menu look under the "Reports" menu and select "Printer Status Report. Once it prints look for the option "duplexer. Must say "installed".

  (2) in the computer, close all windows open as Word, Acrobat etc.

  3) double-click the icon of the printer that you see on the computer screen. Open the actions of the printer and then open "customize your printer.

  4) click on the tab "device settings". ' Here 'Both sides print' or "Duplexer" should say "Installed" or automatic "and if you see"Manual Duplex"it should read 'off '. Click on apply, and then click OK

  5) click on "Set your Preferences.

  (6) check the option "Print on both sides" or something like that. For this option, select "Flip on short edge.

  (7) also, click on the 'Advance' button and look for a reference to two back.

  (8) click on apply, and then click OK. Now try printing.

  If it solves your problem, but it prints backwards, application, click File ==> Print ==> select the printer ==>, click Properties. Here select "Flip on Long Edge" and then try to print.

  Note: Legal size paper cannot be used for duplex printing. Try again with size of letter or A4 size.

• Automatic duplexer on Officejet pro K550

  Automatic duplex printing unit works but will not be on double-sided printing the next duplex print job after print output. Configure whenever I need to print double-sided.

  Hey, that's fine. Thanks for letting us know what fixed your issue.

• Range of Printers Multifunction CM3530fs stopped automatic duplex printing.

  We've had this printer for a while, but it suddenly stopped print duplex automatically.  It only allows for manual duplex printing now, and it is impossible to find how to reload once one side has printed.  I don't know what happened, but it must be something simple.  Any suggestions?

  Thanks for the clarification,

  Make sure that automatic duplex printing accessory is turned on in the settings of the printer and try to print again:

  Enter the control panel > devices and printers.
  Right-click the printer icon, and then click printer properties.
  Click the device settings tab.
  As installed in Duplex Automatic Two-Sided accessory and then click OK to save the changes.

  Please let m eknö if this is useful,
  Shlomi

• HP Photosmart C7280 all-in-One Printer Windows 7 64 bit automatic duplex printing

  I have a new laptop Dell, Windows 7 64 bit computer.  I am able to download my printer (which is connected wireless), but I can't get the automatic duplex printing function to work. I bought this particular printer precisely to be able to do automatic double-sided printing. The downloads that I have tried do not work for Windows 7 64-bit. What can I do else?

  Hey,.

  You should enable the option of automatic duplex printing:

   

  Go to control panel > devices and printers.
  Right-click the printer icon, and then click printer properties.
  Click the device settings tab.
  The accessory in Duplex face as installed two automatic and then click OK to save the change.