HP laserjet pro M125: hp laserjet m125 does support automatic duplex printing?

Similar Questions

• HP Officejet Pro L7580: "Automatic duplex printing Module is missing" message.

  Although the double-sided printing works fine, the "Automatic duplex printing Module is missing" message, as I updated to Windows 10. I installed the latest drivers. Maybe a firmware update can do the trick?

  

  More from my side:

  I thought a little more on this subject and maybe we can solve this problem with a printdriver alternativ.

  Let's try a driver "HP Officejet Pro K550 series".

  Perform the following steps to install the printdriver alternativ:

  • Right click in the bottom left of your desktop and select 'control panel '.
  • then select "devices and printers".
  • Click on "add a printer".
  • Then click on "my printer is not listed.
  • then mark "local printer" (bottom)
  • Select "HP" on the list on the left and "HP Officejet Pro K550 series" on the right
  • After that finish the wizard

  After you have added the printer with success mark this printer as "standard printer" and allows to have an eye on printing and we'll see whether or not the error appears again.

  Kind regards

  Steven_K

• Color LaserJet Pro 200 M251 nw: unable to do manual duplex printing with Windows 10

  Using my prior desktop computer that ran from Windows 7, I had no difficulty to do manual duplex printing on my HP LaserJet Pro 200 M251 nw color.  However, having recently bought a new desktop computer running Windows 10, I have more two-sided printing option.  Instructions to Guide the user to http://h10032.www1.hp.com/ctg/Manual/c02886939 are unnecessary because I cannot complete step 3, click Finish.  After completing the first two steps by clicking on file - print and then click Properties or preferences, I am not provided with an option to "print on both sides (manually)" as described in the User Guide.  How can I get manual double-sided printing capability on Windows 10?

  Usually when you have a driver problem, it is best to find the current driver on the HP website, disconnect the printer from your PC, remove the existing driver, and then install the current driver.

  Windows often installs drivers that do not support as many features as the downloadable driver.

  If my post is solved your problem and click the accepted as button solution under him.

  In order to thank a Tech for a post click the thumbs up button under the post.

  You can even click on the two keys...

• LaserJet 4200tn does not automatically load firmware

  We have a Laserjet 4200tn. When you first turn it on, it displays "LOAD FILE AND RUN.  By trial and error, we discovered that if you press the arrow down to where it says 'Run' and click on the button check 3 times, the printer runs the firmware and loads of everything as it should. Printer works fine after that. But if he loses power or is cut, it is the same screen. We have tried to reload the firmware, but this did not help. Is there a way to tell him in the firmware to the firmware menu to run automatically at startup?  Thank you.

  Thanks for the help, but the cold Reset wasn't even an option in the menu File and Execute Load.  After searching in the menu, I found an option that says something like "Set manual runmode. I arrow down to it and it I would change to Auto. After that, it works fine. Strange that this menu firmware is not really documented anywhere, even in the maintenance manual.  Thanks again.

• LaserJet Pro M426fdw MFP: Automatic duplex printing works in 2016 in Word but not in 1 c Enterprise 8

  Automatic duplex printing works in Word 2016 but no 1 c company. When I choose "Print on both sides" in Word 2016 it works as it should. But in the 1 c company it prints 2 pages instead of 1. Can someone explain why?

  The problem is with 1 c Enterprise 8. In version 8.3, it is possible to select two-sided printing in file-> Page Setup. This program doesn't respect changes to the settings of the printer in the print dialog box. You must change the configuration of the default printer in the control panel.

• HP Office Jet Pro L7590: HP Solution Center does not recognize my printer

  When I try to open the HP Solution Center, I receive a warning tha no devices are detected and yet pints them of pinter and crystallized.

  Hello @BEARS5,

  Welcome to the Forums of HP Support!

  I would like to help you today to solve the problems of detection of product that you encounter on your Windows Vista-based computer when you try to use the Solutions Center HP all-in-one printer, HP Officejet Pro L7590. There are certainly some kind of product detection software or driver glitch that makes the error "detection". To solve this problem please can I you follow the steps below.

  If you use a USB cable connection, please unplug this cable now.

  Step 1: Uninstall the drivers:

  1. Click on the Start menu
  2. Select all programs (or programs)
  3. Select the HP folder
  4. Select your HP Officejet
  5. Select Uninstall

  Follow the instructions on the screen to complete the uninstallation of your product. After the uninstall completed successfully, please proceed to the next step.

  Step 2: Remove temporary files:

  1. Click on the Start menu
  2. In the box "search programs and files" located just above to start after you click on it, type %temp% , and then press enter on your keyboard
  3. When the Temp folder opens, select Ctrl + A at the same time on your keyboard. Everything in this folder will highlight now.
  4. Select the "delete" button on your keyboard. The Temp folder contains the temporary internet files. None of the actual files or folders on your computer will be affected by deleting Temp files. A Temp file should you will automatically get the pop up to 'jump' this point.
  5. Close the Temp folder when it is empty
  6. Right-click the recycling bin on your desktop and select empty recycling bin

  Step 3: Reinstall the drivers:

  1. Please click here to install the drivers for your computer
  2. Once the site opens click on the download button at the top left
  3. If you are prompted, please allow the download to run it
  4. Once the download is complete, follow the instructions on the screen to reinstall your printer
  5. Please do not connect the USB cable until the installation program invites you to

  Once the installation is complete, please open the HP Solutions Center to check if your HP Officejet is now detected and works correctly.

  Please reply to this message with the result of your troubleshooting. Good luck!

• Photosmart 5510 MacBook Pro with OS 10.9 does not see the printer on the network

  Continues to give the error message that the printer is offline... in the process of installing it says successful implemented, but impossible to find the printer on the network... I has not changed anything, unless there was an automatic update done some part/sometimes recently... it was working fine.  The self-test on the printer wireless past everything!  iMac and iPad see & print!

  Please help me!

  Oh, Yes, it appears in the list of devices printer twice: once HP 5510 series when connected by USB, and once as 77 has 267 with everything what unknown IP connection but State... is one that says offline and cannot be found on the network.

  I tried all the steps listed in the proposals of the forum without success.

  Hi msdok,

  I understand that the printer is appearing offline even if you can print from the iPad and iMac. I see your message that you have already done some troubleshooting, but I'm not sure what you tried. I recommend using the steps below if you don't have it already.

  Reset the printing system

  1. Click on the Apple icon ( ), then click on System Preferences.

• 2 wireless automatic duplex printing does not work.

  I can't Auto 2 wireless faces seem to work on my OfficeJet J6480.  It connects and I can easily print but 2 sides printing\g works that manually.  It is a Windows 7 Home Premium 64 bit laptop and a standard computer also has the same problem...  2 automatic duplex printing works very well with a wired computer in the same way (64-bit Windows 7 Home Premium).  A way to solve this problem?

  Hello

  What do you mean by not working that manually?

  You see an automatic option two sides available or not, no specific error message?

  Additionally, make sure that the duplexer is enabled as follows:

  Enter the control panel > devices and printers.
  Right-click the printer icon, and then click printer properties.
  Click the device settings tab.
  As installed in Duplex Automatic Two-Sided accessory and then click OK to save the change.

  Kind regards
  Shlomi

• HP Officejet J6480 All-in-onw automatic duplex printing does not work

  My HP Officejet J6480 automatically duplex in Windows Vista. This feature is absent from Windows 8.

  Y at - it a fix for this problem?

  Thank you

  Meantime2013

  Salvation Dragon-fur,

  I have uninstalled and installed the software of the printer for the fifth time and for the first time, I actually saw J6480 on the registration page. Settings of the printer turned on and the automatic was still missing.

  I also checked "HP Officejet J6400 series properties" and found an option that did not previously exist under device settings.

  Options installable unit duplex (for 2-Sided Printing) was put to uninstalled.  I changed this option to installed and finally I automatic two-sided printing.

  Thank you once more for spending your time to help me.

  Best regards

  Pending

• LaserJet 2300d: Laserjet 2300d does not print double-sided with Windows10

  My excellent laserjet 2300d worked many years.

  Since the upgrade to Windows 10, he claims that duplex printing is not supported. Maybe it's a coincidence, but how to restore duplex printing?

  Hello
  Make sure that the automatic duplex printing option is selected:

  Enter the control panel > devices and printers.
  Right-click the printer icon, and then click printer properties.
  Click the device settings tab.
  As installed in Duplex Automatic Two-Sided accessory and then click OK to save the change.

  Automatic duplex printing should now available.

  Kind regards
  Shlomi

• Color LaserJet CM6040 MFP: A3 manual duplex Duplex on Color LaserJet CM6040 MFP taken in charge?

  Hello

  I hope someone can help to answer this question. I am trying to print a newspaper on the double-sided A3, but I get no prompt to reinsert the paper to print on the other side, as I do when I print A4.

  The parameters have been triple checked and still the A3 prints out sequentialy on one side.

  My question is the Color LaserJet CM6040 MFP support manual duplex Duplex A3?

  Thanks in advance

  JEAN

  The CM 6030 / 6040 CM User Guide manual States:

  «Duplex printing: provides printing automatic duplex (print on both sides of paper).» The range of paper size for automatic duplex printing is 175 to 320 mm (6.9 to 12.6 in.) x 210 to 457 mm (8.3 "to 18"). Media weight range is from 60 to 220 g/m2 (16 to 58 lbs.)"

  If you use manual duplex because the printer driver does not offer the automatic duplex option, it may be that the driver does not know that a duplex unit is equipped.

  The function "automatic detection" used by some drivers on the install (or update) does not always; make sure the driver knows that a duplex unit is present on the printer (assuming that a single is present):

  • For the instance of the printer in question, bring up the printer properties dialogue.
  • Select the device settings tab.
  • Make sure the duplex unit is set to installed and not installed.

  You will probably need to be logged in with administrator credentials in order to change the settings of the device.

• Duplex with our laserjet HP4100 and Windows 7 network printing

  We have two new HP with Windows 7 desktop computers and you try to use the front and back of our network service HP laserjet 4100 dtn can you suggest the correct drivers or settings please?

  Hi, this might be the question why his does not work.

  It's a bug in Windows 7. The duplexor is reported as not installed by default, so you'll have to change that.

  Go to the Control Panel, find the devices and printers, then click on it. Then right click on your printer icon and choose 'printer properties '. In the new screen go to the "Device settings" tab and under "automatic duplex print unit" set installation options on installed. Should be on is not installed by default, so change installed, then click on apply. Restart the software and perhaps even your computer and check that duplex printing is an option now.

• OfficeJet Pro 8600 Plus duplex printing does not

  I am on Mac OSX leopard (10.5.8) and just purchased the officejet pro 8600.  Everything seems to work fine except that I can't understand how to print on both sides.  The option is not allowed in the layout

  

  I checked the settings of the printer and you don't see anything to indicate how to enable the duplex printing option.

  Thanks in advance for the help.

  Hello

  Please follow the steps below to configure the automatic duplex print driver:

  1. check that duplex printing accessory has been installed correctly. To check this open system preferences and go to Print & Fax. Open the print to your printer queue. Click Printer Setup and in the tab menu choose driver. Make sure that the box next to HP printing accessory (duplexer) sides.

  2. on the file menu, select print. The print window is displayed.
  NOTE: The print window might be minimized. Click the blue triangle next to the printer name to see all available parameters.

  3. in the print window expanded you will find next to Copies the checkbox for duplex. Select the check box.
  NOTE: If the check box does not appear in the specific application print dialog box, skip this step.

  4. to select the connection type click the selection box below, listed as the name of the program (e.g. TextEdit)
  Will appear as Copies & Pages within Microsoft Office applications.

  5. Select the menu drop down.

  6. set the duplex option as binding edge Long (Portrait) or binding Long Edge (landscape).

  You can save the settings for later use by clicking preset > save current settings as preset.

  Please let me know of any problems,

  Shlomi

• LaserJet CP2025: My computer did an update of Windows 10 and now I can't do duplex printing CP2025

  Microsoft today pushed through an update Windows 10. Now I can't do a duplexing printer laserjet CP2025. Any ideas? The drivers that I download do not seem to help.

  Hello
  Make sure that the automatic duplex printing option is selected:

  Enter the control panel > devices and printers.
  Right-click the printer icon, and then click printer properties.
  Click the device settings tab.
  As installed in Duplex Automatic Two-Sided accessory and then click OK to save the change.

  Now try printing again.

  Kind regards
  Shlomi

• HP Color Laser Jet Pro M452dw: no automatic duplexing after update driver

  Installed the updated driver and software M452dw.  I can't print any documents usng the automatic duplex function.  I changed the printer properties from one side of 2 sides, but the feature screen always manual duplex printing.  I have been using automatic duplex printing since I bought the printer in November 2015.  Something must have gone wrong with the update or it does not update correctly.  Suggestions are welcome and/or corrective action to fix the configuration.

  You will need to go to devices and printers and right click on the printer icon and scroll first and left click Properties. Now at the top of the page click on device settings and then scroll down to the duplex of change not installed and installable options at installed and apply and save the settings and it should now work as you wish.