What should I install to control a scanner through a VI

Similar Questions

• What should I install?

  OK, I'm a newbie from Oracle here, so go easy on me. Here at my work I just got a new computer and I need to know what Oracle products, I need to install it to be able to continue to do my job.
  
  My new PC is a desktop of Windows 7 64-bit. It has Crystal Reports 2008 and Microsoft Visual Studio 2010 Ultimate. Visual Studio has also Crystal Reports for Visual Studio is installed. The work I do I was writing reports based on our software provider uses, which is a database of Oracle 10 g (I think). I know that I currently use Oracle 10 g client on my old computer (32-bit Windows 7) to connect to this database.
  
  In addition to running reports, I also customized writing console applications, written in c# which query this Oracle database. It does this by referencing the DLL Oracle.DataAccess file. The version of this DLL is 10.2.0.100.
  
  Now, my assumption was that I needed the Oracle Client installed, and since I was using the client 10g before, I looked for it again, but in a version 64-bit capable. It does not appear that this exists, or he did at one point and no longer works. So I tried instead to use the compatible version 64 bits for 11g. I managed to get that installed and used the info from my former tnsnames.ora file to configure connections to my old production and development databases data, but who were all over that I could get. I think that I also need the so-called installed so Oracle data access, but I couldn't find the correct version of this.
  
  Oracle is outside of the scope of what we normally here in our shop, so I failed to find someone here who can help me. I hope that the good people here can tell me, based on what I have and what I do, what I need to install. If there is no more I can provide that help (version numbers, etc.), let me know. Thank you!

  Really? Knowing that I need to be able to run reports on an Oracle database and be able to write .NET applications what query on the same database, you cannot advise what Oracle software, I need to install? I don't know how I can find this list because I don't know much about Oracle software. As I mentioned, I think I need to install Oracle (ODAC) data access, I'm looking for confirmation that it is what it is.

  Well, this post is your question more clear for me now :)

  To download Oracle Forms/Reports, please refer to http://www.oracle.com/technetwork/middleware/reports/downloads/index.html

  For the ODAC, please visit http://www.oracle.com/technetwork/database/windows/downloads/index-101290.html

  If you need additional information on these products, click on the tabs products and technical information which are accessible from the links referenced in this response.

  Thank you
  Hussein

• I bought a dell inspiron 1440 without any operating system. What should I install first, the dell drivers or windows vista?

  I use the windows vista installation disc supplied with my previous pc. I tried to do a clean install, inserted the disc into the cd/dvd drive. No installation window. The screen says "windows loading files..." After a few hours, the display shows something like

  "" windows has not... error: file boot32.exe is corrupt or not found. "."

  Then the Dell XP disc is great to use. However, do not install an operating system is usually caused by (in order of probability):

  1. you are trying to install with other devices connected to the computer. Unplug them before trying to make an installation.

  2. "" "" defective installation media. "" Check the CD/DVD installation for scratches, tasks. Try another machine.

  3. bad optical drive. Test with another CD/DVD bootable or Exchange for a well-known work.

  4. faulty RAM. Test with Memtest86 + www.memtest.org . You will download the .iso image file to create a bootable cd. Burn the file with the third party burning software *-as an image, not in the form of data. Then start with the media that you did (you may need to change the boot priority in your BIOS so that the optical drive is the first boot device). The test runs immediately. The test run for an hour or two--at least that errors are seen immediately. If you get any errors, replace the RAM.

  * It is not necessary to have a third party burning software in Windows 7 since Win7 natively allows to burn an .iso. Other operating systems require it. A good free choice ImgBurn comes from www.imgburn.com .

  5. bad hard drive. Test with a diagnostic utility downloaded from site of the disc mftr... You create a bootable CD with the files you download. Burn the file with a third-party burning software (unless you have Windows 7, that allows to record the .isos natively) - as an image, not in the form of data. Boot with the CD that you have done and do a full test of the reader. The physical tests fail, replace it.

  6. other hardware components are faulty.

  Then you unfortunately discovered why the phone was for sale.
  MS - MVP - Elephant Boy computers - don't panic!

• Should I install Norton Antivirus on my Mac El Capitan?

  Hello.  Windows laptop to my husband was recently infected with the zepto ransomware. (Nightmare and we consider very careful.  In the interest of keeping at least 2 copies of disk hard of absolutely everything!  It also infected Dropbox and OneDrive, destroy them.  These people are evil).

  We have improved our security Norton to Premium, which includes protection for 10 devices, including Mac.

  What I should install Norton Premium on my Mac, or is existing protection/security/firewall Mac good enough?  Do not wish to compromise my Mac, if integrated protection is the best to use.  Thank you.  (Recognizing some quick advice.)

  FranNewForest wrote:

  What should I install Norton Premium on my Mac,

  Please do not install all this software protection on a Mac. It is not necessary.

  FranNewForest wrote:

  is existing protection/security/firewall Mac good enough?  Do not wish to compromise my Mac, if integrated protection is the best to use.

  Yes, the built-in protection is good enough.

  Keep the OS X and other applications update.

  For more information:

  http://www.Apple.com/OSX/what-is/security/

• My windows cannot display the volume on the taskbar control, I think that volume control program is not installed, what should I do?

  My windows cannot display the volume on the taskbar control, I think that volume control program is not installed, what should I do?

  Have you tried the following tutorial?
  http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html

  The tutorial is for Vista, what operating system are you using?

  t-4-2

• I recently had to re - install Windows XP on my computer and lost all my stored programs. Now my speakers do not work. The control panel says no audio device. What should I do to recover my audio? None

  My audio does not work. It worked before I re-install Windows XP. What should I do? I'm supposed to have an audio installation disc? I'm new on the technical aspect of computers, so I know only the basics?

  Using the Device Manager is a good way to get the drivers, but if you do a clean install on a computer or laptop, you must download the supplied drivers initially installed on the computer or laptop to the manufacturer. that is, if you have a Dell, then go to the Dell website.
  the site Web of HP/Compaq
  the Site of Asus
  Acer site
  Alienware website (Now owned by Dell)
  eMachines Web site
  IBM Web site
  Sony Web site
  Toshiba Web site

  Have I no all the em? Anyway, if you have a driver supplied with the computer disc, use this cuz he'll have original manufacturer drivers and the software that you get on the website anyway.
  Also, if it's a Dell, you would like to have a look and print their Instructions on how to install the drivers, Dell cuz drivers must be installed in a specific order.
  Good luck.

• Satellite P750-103 - what drivers should I install?

  I have the following problem: after you have reinstalled Windows 7 64 bit and the pilots, who have downloaded from the official website Toshiba.ru, licensed my laptop slowly began to run File Explorer, with indexing for 5-10 minutes the contents of the hard disk (sometimes - with no results).

  I think that probem associated the mechanizm of driver installation.
  East - the right conclusion?

  If YES, in this regard, I have the following questions:

  -Should what drivers I install?
  -What is the correct serialization of installing these drivers?

  Hello

  See the list of drivers and make sure that you have installed all of the drivers listed:

  Win7 64-bit SP1
  Sun Java2 Runtime Environment 1.6.0_20
  TOSHIBA Assist 4.02.02
  TOSHIBA Bulletin Board 2.1.10
  TOSHIBA ReelTime 1.7.17.0
  SW 9.2.0.1015 Chipset installation utility
  Intel Management Engine Interface V7.0.4.1197
  Driver Intel 8.15.10.2353
  267.44 NVIDIA display driver
  Driver Intel Rapid Storage Technology 10.1.2.1004
  Utility 1.63.51.2C TOSHIBA supervisor password
  TOSHIBA HW Setup Utility 1.63.1.34C
  1.63.0.12 TOSHIBA Flash Cards Support utility
  TOSHIBA value added package 1.5.4.64
  NVIDIA HD Audio Driver 1.1.13.1
  Audio Realtek Driver 6.0.1.6305
  TOSHIBA 1.0.3 Wireless LAN indicator
  Atheros Wireless LAN Driver 9.2.0.206.0.s3264_wCAT
  Synaptics Touch Pad Driver 15.2.11.1
  TOSHIBA HDD Protection 2.2.1.13
  Atheros Bluetooth Driver Package v1.0.4 Filter
  Battery Bluetooth for Windows by Toshiba v8.00.06 (T)
  Realtek LAN Driver 7.038.0113.2011
  JMicron 1.00.57.02 card reader
  ENE CIR driver V3.2
  USB3.0 Driver 2.0.34.0
  TOSHIBA Sleep 1.4.2.7 utility
  3.1.9 TOSHIBA face recognition
  TOSHIBA eco Utility 1.2.24.64
  TOSHIBA HDD/SSD Alert 3.1.64.8
  TOSHIBA Service Station 2.1.52
  2.0.0.7.64 HDMI Control Manager
  TOSHIBA PC Health Monitor 1.7.5.64
  ConfigFree 8.0.37rev.2
  TOSHIBA Web Camera Application V2.0.0.19
  TOSHIBA V4.00.6.08 VCR - HAS
  TOSHIBA Media Controller 1.0.86.2
  TOSHIBA Media Controller plugin 1.0.6.1
  TOSHIBA resolution + plug-in for Windows Media Player 1.1.0
  PatchFiles PCIIDEREG - 1.2
  PatchFiles TosVolRegulator_x64_1.1

• What versions of software Labview should I install for mindstorm NXT

  I would like to know what version of Labview evaluation software, do I need to install in order to communicate and to control the embedded Mindstorms NXT controller and its outputs (engine, sounds) and inputs (sensors). I used the nxtg software, but want to learn and activate the Labview associate for learning and teaching. Should I install all components of this version or just a little?

  I ask this question because I want to save space in my PC.

  No matter what version of LabVIEW is fine, but you want the NXT module which is free. Download LabVIEW. Simply search our site for 'module NXT' to get the latest version that corresponds to your LabVIEW.

• Sierra of downloaded OS but have not installed. What should I do now?

  I downloaded macOS Sierra, but it has not installed. I rebooted the MacBook Air without success. What should I do now to get installed it.

  Download and installation are separate steps. You should be able to find 'Install macOS Sierra' in your Applications folder. Double-click it to start the installation. It would really be a good idea to first make a backup complete and bootable.

• Hello after that I downloaded IOS 10 my watch to lose control of my Iphone and he couldn't reconnet. What should I do? Can anyone help?

  Hello after that I downloaded IOS 10 my watch to lose control of my Iphone and he couldn't reconnet. What should I do? Can anyone help?

  Hello

  The following steps may help:

  • Restart your iPhone and your watch, both turn off together, and then restart your iPhone first:
    • Restart your iPhone, iPad or iPod touch - Apple Support
    • Restart your Apple Watch - Apple Support
  • Disable the twinning and re - pair your watch:
    • The app shows on your iPhone takes a backup of your watch automatically when the disparity with the app choose to restore from backup during the whole upward. Most of the data and settings will be restored, with a few exceptions (for example cards Pay Apple, access code).
    • Cancel the twinning of your iPhone - Apple and Apple Watch Support
    • Set up your Apple Watch - Apple Support

• When I try to install an add-on, it load completely and said so "seconds remaining" and never move forward. What should I do to remedy this?

  When I try to install an add-on, it load completely and said so "seconds remaining" and never move forward. My connection and the computer properly. I have the latest version of Firefox, it is updated. I get this add-on for the mozilla site, what should I do otherwise?

  Please update your firefox latest version Firefox 25 and check whether the problem exists or not

• For the last few weeks, after that I closed 19.0 FF, I can't open it. I resorted to having to re - install FF each time so that it can open. What should do?

  For the last few weeks, whenever I close Firefox 18 (and more recently 19.0), I can't reopen the browser again. The application runs as if it is going to open, then stops and sits there. I had to resort to the re - install the browser every time now, very irritating. He remembers my tabs as they had been, that I want to. I used to open up to 40-50 tabs, but now made an effort to keep them below 20, thinking that it would help work more optimally. I'm tired of re - install the browser all the time. What should I do? Thank you

  When this happens, check the Windows Task Manager to see if there is a hidden window or the firefox.exe process is at a standstill?

  To open the Windows Task Manager, press Ctrl + Shift + Esc

  On the Applications tab, look for any window with the icon of Firefox. See something wrong here? In another thread, users have reported finding what seems to be a rogue process. If you find something, try to select and killing using end task.

  Under the processes tab, look for firefox.exe. According to the displayed columns, you can often see that the program is reading, writing, communicate or simply sitting there, doing nothing. If you have allowed time to stop Firefox and it crashes, you can select firefox.exe and click on end process.

  After that, Firefox expected to start normally.

  Please see this article for troubleshooting suggestions for when Firefox crashes out. https://support.Mozilla.org/en-us/KB/Firefox-hangs-or-not-responding#w_firefox-hangs-when-you-quit-it

  A little luck?

• I have a Mid-2010 Mac Pro Tower running OS Yosemite to which I would like to connect a Tower (G-Technology) G-Speed Q RAID via eSATA connection.  What type of card PCIe eSATA should I install in my Mac Pro tower to enable such a connection?

  I have a Mid-2010 Mac Pro Tower running OS Yosemite to which I would like to connect a Tower (G-Technology) G-Speed Q RAID via eSATA connection.  What type of card PCIe eSATA should I install in my Mac Pro tower to enable such a connection?

  https://eShop.MacSales.com/item/NewerTech/MXPCIE2E2U3/

  https://eShop.MacSales.com/item/NewerTech/MXPCIE6G2S2/

  https://eShop.MacSales.com/item/NewerTech/MXPCIE6GRS4E/

  https://eShop.MacSales.com/item/sonnet%20Technologies/TSATA6PROE2/

• Satellite X 200 - 21 K - what current readers should I install

  Hi all

  I just sent my laptop for repair, Ii is currently experiencing vista windows on it and I would support cause I will format.
  I have a not so recent model and it's hy I need assistance.

  My question is what is the current readers, should I install for this model?
  I mean all except windows (to put windows 7 btw)?
  What setting should I choose.

  Here, I should make a remark that I use for hardcore games, and I'm not interested in running SLI system even if I heard it would be good to have it on use no matter if the game supports it or not.

  Thank you to forward to your answers.

  Hello

  Just a question;
  Why you n t take the disk recovery and would restore the operating system using this disc?
  That s a simpler and faster way to get the operating system running on this laptop.

  Otherwise, install all drivers and tools that you can find for this model of laptop on the page of the pilot European Toshiba

• Firefox crashes every time at this moment I have activate the flash plugin. I uninstalled and installed a plugin once again without any positive result. What should do?

  Firefox crashes every time when I activate a flash plugin. It started today after an automatic attempt to update shockwave. I uninstalled flash and installed again. Always the same story. There is no previous version of flash available on the adobe site. What should do?

  In the menu do help-> Check For Updates and follow the instructions to get 3.6.6 who will stop the Flash blocking Firefox.