What software to use when installing several all-in-One printer (C4380)

Hello

I have a new computer, the operating system is Windows 7 (64-bit). I still have to connect my printer; a Photosmart C4380 bought in 2007.  From your site, I see that other users of HP printers have had problems with Windows 7. So I would like to know if I need to install my printer using the original CD (Version 9.0 1) which was designed for Windows 2000, XP and Vista, or is there a file I can download on the HP site instead. Should I just get a new printer compatible with Windows 7!

I would be grateful for your advice.

Download and install the driver mentioned in the link below. This is the latest software and drivers available for your printer for Windows 7. Make sure that the printers USB cable is DISCONNECTED before you run the installation file.

http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-76047-2&LC=en&DLC=en&cc=us&product=3221646&sw_lang=&OS=4062

Tags: HP Printers

Similar Questions

  • 2543 all-in-One printer: what ink need a purchase for 2543 all-in-one printer (model name: D3A80A) Please?

    What ink need a purchase for 2543 all-in-one printer (model name: D3A80A) Please?

    61 HP cartridges are a pretty popular current model, I expect it would be stored in most places that carry the cartridges.  I did a search at Walgreens, about 3/4 of them had 61 cartridges in stock at Houston.

  • Cannot install the all-in-one printer

    Download HP officejet 4500 G510-m from HP website. When I click on install, I get the HP message: the system cannot find the specified file. I've never had this installation problem.  I could always install. I believe the download is corrupted

    System Windows 8.1

    I uninstalled printer because had message printer disconneted.

    Check the devices & printers in the control panel

    Model photosmart all-in-one printer scanner copier HPDD4BE7 (HP office jet 4500 G510g-m) is installed on my computer. Not my model according to the image

    I don't have photosmart all-in-one printer. I have printer HP office jet 4500 G510g-m all-in-one

    According to HP print and scan the doctor 4.3

    The following products are visible from your computer

    HPDD4BE7 (HP office jet 4500 G510g-m)

    connection: network

    software requirement: installed

    I tried to print but prints blank pages

    I wonder if the cause of the problem when clicking on install is that I have already installed (HP office jet 4500 G510g-m) HPDD4BE7 so get the HP message: the system cannot find the specified file

    I have good HP office jet 4500 G510g-m printer installed?

     

    Troubleshooting report

    Problem with the yellow triangle detected printer with an exclamation mark inside

    There could be problems with HPDD4BE7 (HP Officejet 4500 G510g-m). Windows will take additional steps to continue troubleshooting.

     

    Solution: Rename the extensions of .dat files in the Windows folder and reinstall the software

    First step: rename the .dat files in the Windows folder

    Search box, type % windir %

    No adjustment results found for your search %windir%\System32

    The first step is not a solution

    Second step: download and install the software from the HP site

    Not a solution: when click on get installation message: the system cannot find the specified file.

    You don't need to the second step if you HP print and scan the doctor 4.3 installed or HP printer installation for windows Wizard. It detects the office jet HP 4500 G510g-m software is not installed, select the printer and click on install to download the software.

    question: when when the get message install HP: the system cannot find the file logle even when Mcafee firewall has been disabled or uninstalled.

    I have no problem, download and install any software but

    HPDD4BE7 (HP Officejet 4500 G510g-m)

    I did the test HP officejet 4500

    Green connection box

    device status green checkmark

    I cannot install the software (HP Officejet 4500 G510g-m) HPDD4BE7 HP printer install wizard for Windows or printing HP and SCan doctor 4.3

     

     

    Ok

    Please try the following steps:

    1. First of all make sure that McAfee of real-time scanning is disabled until you restart the PC.
    2. Open the dialog box run by clicking on the Windows key and the R key on your keyboard.
    3. Type %windir% , and then click OK.
    4. Type hpoins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat.
    5. Type hpwins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat.
    6. By following steps 2 to launch the run dialogue box, type MSIEXEC /Unregister. in the Run dialog box and click OK.
    7. By following steps 2 to launch the Run dialog box, type MSIEXEC /REGSERVER in the Run dialog box and click OK.
    8. Launch the dialog box run by following steps 2, type % temp % and click OK.
    9. Open the last HP installation folder, that starts with the characters 7z (you can sort the view by date humidification) and click on the file Setup.exe .

    Please follow these steps in the exact order, is there a difference during the installation of the software?

  • I need information on upgrading my operating system in order to install the all-in-one printer Officejet 4315

    I bought a printer all-in-one Officejet 4315 with a friend and when I inserted the disc for HP Officejet 4300 series, it only would be not installed said: Action required: click Cancel to exit this software installation.  Install this product on a computer that is running one of the operating systems supported Miscrosoft or refer to your computer documentation for more information on the upgrade of the operating system of your computer.

    Hello

    It is not the operating system that is at fault.

    Need good printer drivers to install correctly.

    Access the site Web of HP Driver on the provided link > select operating system > finding drivers > follow advice on installation of HP.

    He'll also be troubleshooting information at this location.

    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=1138342&LC=en&cc=us&DLC=en&lang=en&cc=us

    See you soon.

  • Cannot print from Word 2003 using Epson Artisan 800 all-in-one printer

    Hello!
    Using Vista Home and Office 2003 with Epson Aritsan 800 connected by USB.  When you open a Word 2003 document, get pop up msg:

    "The printer has not yet responded, but the Microsoft Office program may be able to move forward without printer information.  Do you want to continue to wait for the printer? »

    I select 'no '.  The document opens.

    Then try to print from file / print - it finds the printer printer "EPSON Artisan 800 Series", but give the same message as above: (.)

    After 20 min of combat and by selecting several times, it finally will print, but slowly.

    Any ideas or help to solve?

    Thank you!

    PS - All current print drivers have been installed.

    I know that its an old thread, but I can't find solution s everywhere on the web for this
    However, I am happy to say I've cracked toay.
    Its a corrupt police. I deleted the content of the c:\windows\fonts folder and then replaced from another machine
    It works now!
    Machine, I had to fix was running WinXP HOme / Offcie Pro 2003, but no reason why it will not solve the problem on a newer OS

  • VMPlayer cannot detect the scanner for all-in-one printer?

    Hello.  I am running Linux Mint 14 in VMPlayer on your desktop AMD Win7 hexagonal base.  The implementation uses a MG5320 Canon all-in-one printer on a wireless network.

    Symptom: When you try to use the scanner under Linux software, I get an error that does not scan.

    Comments: I know that the printer is connected and can print from VMPlayer.  I used the scan software successfully in a Win7 laptop boots double in Linux Mint 14.  Therefore, the only difference is running Linux Mint in VMPlayer.

    How can I get the functionality of the scanner of my all-in-one printer with VMPlayer?

    TNX in advance for all advice.

    The 'virtual' printer in the virtual machine settings through the present printers on the host - there should be no impact on your ability to 'normally' adding printers inside the guest.

    Unfortunately, I'm not familiar with the same type of printer, and I'm not Linux.

    The thing is useful that maybe I can tell you, is that you may need to configure the virtual adapter as connected by a bridge instead of the default NAT.

  • C7180 All In One Printer

    Just installed C7180 All In One Printer on a Mac under OS 10.9.4.  Scans OK and saved on the desktop. The scan to send the opening, I have just a spare page horizontal black and white lines.  Any help gratefully received.

    Hello

    Try scanning of Image Capture or preview, if you can use the HP Scan application, it is not compatible with the operating system for the C7180 and can cause outpus issue as described here:

    http://support.HP.com/us-en/document/c04028214

    Shlomi

  • How do you set the time and date for the fax on HP Office Jet 4622 all-in-one printer?

    I installed the all-in-one printer HP Office Jet 4622 and everything works like.  However on the test page for the date and fax are showing Jan-00-00 00:00 AM.  I don't know how to change the date and time.  Help, please.  Thank you.

    Use the Setup (wrench) button on the front of the printer to look through the settings menu to set the date and time of the printer.

  • Kodak ESP 5250 all-in-One Printer

    I HAVE TRIED to MANY TIMES to INSTALL this ALL-IN-ONE PRINTER WITH WINDOWS 7 64 BIT... IT IS NOT COMPATIBLE. MY OLD COMPUTER WHICH I HAVE RECENTLY GOT RID OF WAS COMPATIBLE WITH THIS PRINTER ALL IN ONE, IT IS WINDOWS XP.  I HAVE THE PRINTER INSTALLED ON MY WINDOWS XP LAPTOP.  HUMAN COMPUTER ALSO NOTIFIED MICROSOFT AND KODAK THAT A DRIVER MUST BE INSTALLED.

    You can chat with support technique kodak over here:

    http://www.kodak.com/global/en/service/chat/index.jhtml?PQ-locale=en_US

    down to the line that reads your esp 5250 model

  • should what software I use to burn the iso file of windows xp?

    should what software I use to burn the iso file of windows xp?

    I like ImgBurn.

  • What software to use to open a file .igx in the Windows environment

    What software to use to open a file .igx in the Windows environment

    Hi Docsri,

    The IGX file type is primarily associated with ' iGrafx FlowCharter / iGrafx Process' by iGrafx LLC. A graphical process simulation and modeling program.

    You can use the software provided by ' iGrafx IGX to open files in Windows.

    Frequently asked questions

    http://www.iGrafx.com/products/Flowcharter/14/FAQs.html

    Evaluation software downloads

    http://www.iGrafx.com/downloads/trial.html

  • What format to use when you try to download videos on instagram or even try to send an e-mail

    What format to use when you try to download videos on instagram or even try to email them

    Hi Rashad,

    What format to use when you try to download videos on instagram or even try to email them

    This info is not easy to find on the site Instagram. Seems like Instagram want video to be uploaded from your phone. I guess that means he expects H.264 video. Please try it first and see if it works.

    Thank you

    Kevin

  • What software is used to develop complex programs like "Adobe InDesign"?

    I want to know:

    What software is used to develop complex programs like "Adobe InDesign"?

    Thank you.

    Huh?

    It's a very weird question.

    InDesign is written in C++.

    Substances

  • Cannot install HP Photosmart C6380 all-in-One Printer

    Original title: HP Photosmart C6380 all-in-One Printer, it will not be installed in the computer disk or web site

    None of the things I have tried will allow programs to download and when I go to detect does not detect the printer at all so anything that I want to use this for is not good and I about ready to kill hp all to gether

    Hello

    1. who is the operating system installed on the computer?
    2. have you checked if the HP printer is compatible with the version of the operating system that you are using?
    3. do you get an error message when you try to install the driver?
    4. what all troubleshooting have you tried?

    If you use Windows 7, follow these methods.

    Method 1: You can also run the fixit of material.

    Hardware devices do not work or are not detected in Windows
    http://support.Microsoft.com/mats/hardware_device_problems/

    Method 2: in the Windows printer problems

    For more information, see these articles:

    Install a printer
     
    Find and install printer drivers

    Please provide us with more information on question help you also.

  • To re - install my web download drivers for my Deskjet F4280 all-in-One Printer

    I have installation problems with my Deskjet F4200 all-in-One printer on my Windows 7, Home Premium desktop PC / 64 bit version & I had, once last month, uninstalled my I bought online for my version of platform & bit of the os, printer drivers & all program of printer drivers have been uninstalled successfully in the programs section and my control panel features except for :
    HP Software IDF.

    I ended up, in addition to the tasks above performed & completed, deleted all files remaining hp of my drive (c).

    I discovered a web page of troubleshooting on the hp.com Web site, under the following title:

    ""Of HP Installer has stopped working "or the installation program does not run when you install under Windows 7 HP printing software"

    on the following web page: "http://support.hp.com/us-en/document/c03030583".

    My processor information:
               "AMD Athlon II X 2 240 processor / 2.80 Ghz '.

    I tried to re - install my drivers for my printer, & have problems trying to re - install, with no luck.

    I have read the following information since the last link web I mentioned (SHOWN above and here @: 'http://support.hp.com/us-en/document/c03030583') trying to follow them to correct my problem exact, but without success.

    If anyone who reads this could have a solution to my problems, please contact me either by one or more of the following methods:

    {Deleted private information}

    Thank you, Christopher Canfield.

    The troubleshoting document you provided a link to not tell to use the hotfix with the processor installed in your desktop PC.

    Have you tried to use the Wizard for Windows HP printer installation?

    I recommend to try it. It can solve the problem you are experiencing.

    If it is truncated, without success, then click on the following link and select Windows 7 from the list provided on the HP document.

    Uninstall the HP printer software.

    Once you have completely uninstalled the printer software and driver, run the HP printer install wizard again.

    Please keep us in the loop by posting your success or lack of success with the installation of the software of the printer here in your thread.

Maybe you are looking for