What specific frequency is a bridge (802 .11b) wireless aironet 350 grave?

Similar Questions

• Problems of internet connectivity with Dell Inspiron 7520 (1703 of Dell Wireless 802.11b/g/n 2.4 ghz)

  Hello

  I bought a Dell Inspiron 7520 for a week now, and I had a strange problem with internet connectivity since then. First, wifi takes a lot of time to connect. After, I'm online, every 10 minutes my network access stops working completely. But if I click on the network icon in the toolbar, it starts working again, but it stops in the next 10 minutes, once again, and so on. If I try to fix connectivity problems, he always find and solve some in the network card or wireless, but then point again, after 10 minutes, or so, it happens again.

  My network card is a Wireless Dell 1703 802.11b/g/n 2.4 ghz and I tried to update and to re - download the firmware, but nothing seems to fix.

  What should I do to fix this?

  Hello friends. Recently I came across the same problem identified by many with a Dell Inspiron 15R laptop 7520 with the Dell Wireless 1703 (Atheros chipset). After losing an entire afternoon and looking at forums and their complaints, I think that I found the solution to the problem (at least, here is running).

  The laptop is connected to a router TP-Link TL-WR740N. The router is configured to run with a frequency of 20 or 40 MHz, making the switch automatically in the factory. The mobile card wireless driver is configured to work only with 20 MHz at the factory. But can be configured to work with two frequencies is adapted automatically. To do this, change the configuration (in Windows 7):

  Start > Control Panel > Device Manager > network adapters > Dell Wireless 1703 802.11b/g/n (2,4 GHz) > click the Advanced tab > select 802.11n bandwidth. Change the value of Auto 20 MHz / 40 MHz.

  Press OK and wait for to reconnect you.

  I hope this helps.

  Jeferson Vasconcellos

• Broadcom 4313GN Wi - Fi 802.11b/g/n 1 x 1 adapter

  Can I change wifi adapter in my ultrabook envy4-1002tx Broadcom 4313GN 802.11b/g/n 1 x 1 adapter wireless Intel® Dual Band Wireless-AC 7260 If Yes so what equipment supports in

  Product name Intel® Dual-Band Wireless-AC 7260

  Model number 7260HMW 7260NGW 7260SDW

  Version 802.11ac, 2 x 2, PCIe, USB, Bluetooth 4.0, HMC

  802.11ac, 2 x 2, PCIe, USB, Bluetooth 4.0, M.2 2230

  802.11ac, 2 x 2, PCIe, USB, Bluetooth 4.0, M.2 2226 solder down

  Hello

  Please visit the page #2 of the manual of the second on the following link:

  http://h10025.www1.HP.com/ewfrf/wc/manualCategory?cc=us & LC = in & Product = 5317852

  That this list, it may not work at all.

  Kind regards.

• HP 14 laptop: how to replace the QCA9565 of Qualcomm Atheros 802.11b/g/n WiFi Adapter

  Hello

  I have a laptop HP 14 which is currently used for academic purposes. However, at the school, the WiFi is dual band, and so I can't connect.  At the moment I have a QCA9565 of Qualcomm Atheros 802.11b/g/n WiFi adapter and I am aware that is not double band. So is it possible to replace the current single band with a dual band adapter? Is it is possible to replace the card, then you have suggestions of what to buy and how to install the product in my book. If there is a free alternative, please keep me informed.

  Thanks in advance.

  Hey @Raiyan1 ,

  Here is a link to page 31 of your manual . The Wifi card is a mini map 1 x 1.

  Thank you.

• Broadcom 4313 802.11b/g/n does not not on WPA2-PSK AES encryption.

  Hi, I just bought this adapter WLAN HP G62-b13SA Notebook PC is Broadcom 4313 802.11b/g/n his work well on WPA - PSK TKIP, but when I am trying to connect to my WIFI with WPA2-PSK AES or TKIP its not connecting any tried the upgrade and downgrade the driver but still no problem solved. same did the same thing with the ACCESS POINT which is Zyxel G-570. ideas how its going to work or it just does not support WPA2 to all?

  I had a similar problem with this network adapter. I could see the networks, the signal strength was excellent, but whenever I tried to connect, it failed. Several times he connected successfully, but the connection lost after a few minutes. In any case, I managed to fix after spending several hours playing with the options on the Advanced page of the driver. That's what I have now:

  802.11n preamble: Mixed Mode (this is a must if you are networked mixed g/n)

  Afterburner: disabled (not sure about that)

  AP compatibility mode: superior performance (I have a router standards)

  Bluetooth collaboration: disable (everything started work immediately after I disabled it)

  BT - AMP: disabled (not sure about that)

  Mixed cell support: disabled (this is not necessary for typical wifi networks)

  Technology XPress (TM): disabled (not sure, that's something for the performance of g)

  Other options are default values. I use a pilot boarded through Windows Update.

• Atheros AR9285 802.11b/g/n WiFi Adapter does not connect.

  I have a HP DV6 3049tx windows 7 64-bit, which have an integrated Atheros AR9285 802.11b/g/n WiFi Adapter of the for 1 month I am not able to connect to any network if a list of available wireless networks. the error msg that says is Windows is not wheat to connect to the network. My version of the driver is 8.0.0.238. What can be the solution Please HELP!

  Hello harshsinha,

  Take a look at this page http://goo.gl/7sjsm

  All drivers and updates are found on this page. Check inside the Networking section and you will see an Atheros driver

  This document here http://goo.gl/Vnwiu will give a few wireless troubleshooting steps that will help.

  Please let me know if this helps solve your problems.

• RALink RT5390 802.11b/g/n WiFi Adapter will remain not connected

  I use a laptop of Hp 2000, and the adapter installed on the computer provided wireless is a Ralink RT5390 802.11b/g/n WiFi Adapter.  I ran the driver update tool, and it says I have install the driver update.  I have also run the tool to "Diagnose the problem", and he says that he has no problem.  However, the computer loses internet connection constantly.  I guess it has something to do with the wireless adapter, because all other wireless in the House have no problems. The operating system is Windows 7.  I'm a little tech savvy and can normally include questions to just play with it for a while, but this one has me dumb founded, and its very annoying when you try to do something and you just loose connection and have to start all over again. Help, please!

  Hello:

  I found that the relying on a tool the driver does not always provide information.

  Here is the link to the latest version of the driver if you don't v.3.2.12.0 (13 April 2012) installed.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & CC = US & prodTypeId = 321957 & prodSeriesId = 3688868 & swItem = ob-104619-1 & mode = 3

  Paul

• Pavilion g6 - 1185st: Broadcom 4313GN 1 x 1 Wi - fi 802.11b/g/n

  Driver needed real Wi - Fi 802.11b/g/n 1 x 1 4313GN Broadcom.

  PCI\VEN_14E4 & DEV_4727 & SUBSYS_1483103C & REV_01

  out 5.100.82.82, date 20.05.2011
  
  My system Windows 10 64 x HP Pavilion G6 - 1185st
  
  THx

  Hello

  Please try:

  Broadcom Wireless LAN Driver for Microsoft Windows

  http://ftp.HP.com/pub/SoftPaq/sp57501-58000/sp57965.exe

  Kind regards.

• Drivers Ralink (Mediatek (1 x 1) 802.11b/g/n and Bluetooth 4.0 Combo) is not stable on Win8

  TL; Dr. download from the support center, the Ralink (Meadiatek) drivers won't install on HP ProBook 450 G1

  Hello, recently the company I work for bought a HP ProBook 450 G1 (i5 - 4200 m, 8 GB, 750 GB, amd map with the 1 GB version) and I have to put in place. They have also bought Windows 8. So I installed windows 8 on the computer, but when I go to network, thereš adapters only bluetooth and wired connection. So I downloaded the Ralink 802.11 b/g/n Wireless LAN Adapter Driver here and when I try to install it, the installation program opens a second and then closes down, at first I thought that maybe the installation is in the background, but it wasn't the case. Then I tried to download Mediatek 802.11b/g/n (1 x 1) and drivers Bluetooth 4.0 Combo of the net here, they have installed and appear in programs and features, but the WiFi adapter is not on the menu of adapters. not it does appear in Device Manager. No driver disk is also don't come with the purchase.

  Can someone help me please? The only way to connect the PC to the internet is to use the WiFi now.

  Well this was deceptive. Everywhere where I was watching on the internet, he said that HP Probook 450 G1 has a Mediatek 802.11b/g/n card, but it turns out when I checked the BIOS it says that this laptop has an Atheros WiFi card, so I downloaded the driver on their part and now the wifi works.

• Pavilion 1009TX M6: Broadcom 4313GN 1 x 1 adapter Wi - Fi 802.11b/g/n cannot connect to Wi - Fi

  Hi all

  I have this laptop from HP Pavilion M6 1009tx. Since I bought it 3 years ago, I was faced with the question of the laptop will not connect to my WiFi automatically when I turn it on. It happens that 7 of the 10 times I would say. Sometimes it connects all rite away but above all he does not connect even if I try to connect to the available network manually.

  I then try to reboot several times as well as to try to connect to the WiFi manually, if I'm lucky it will connect, otherwise I have to keep restarting. The adapter doesnot connect even when I disable and enable (Broadcom 4313GN 1 x 1 adapter Wi - Fi 802.11b/g/n).

  In the year of punch he used to connect whenever I plugged it manually, but now I try several times for sure.

  Any help would be appreciated.

  Concerning

  Hi @NSIDHU ,
  
  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!
  
  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Pavilion Notebook m6-1009tx and falling wireless signal. I would change the channel on the router. Routers are able to communicate to your laptop on several different channels, and sometimes it helps.

  You could disable IPv6 for the laptop. Some say this helps. Restart the computer after trying this.

  Solve this problem Microsoft Fix it 50413.

  Here is a linkto help as well.

  Please let me know how it goes.

  Thank you.

• HP Pavilion Touchsmart 15 n098nr qualcomm AR9485 Atheros 802.11b/g/n adapter connection problems

  HP Pavilion Touchsmart 15 n098nr does not connect to the AR9485 of Qualcomm Atheros 802.11b/g/n, adapter, or the virtual card directly Microsoft Wi - Fi. At Windows 8. Upgrades to Windows 8.1 a month or more. Problem of DIDN'Tnotice.  I even tried an upgrade of driover to a newer driver and nothing.  How can I fix / please!

  Hi @dexdome

  Welcome to the HP Support Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I see you are having a few network issues with your Pavilion computer, and I'll be happy to help you. Not sure where you got your wireless driver. You mentioned you tried an upgrade of the driver, if you don't from the site Web HP try this driver Atheros of Qualcomm .

  Here is a document from HP on troubleshooting wireless network and Internet with a number of different troubleshooting steps you can try including the resolution of the problems Windows integrated. Here are some additional things more to try.

  Network power cycle:
  
  1. turn off your laptop.
  2. unplug the power to your router.
  3. disconnect the power to your modem.
  4. wait at least 45 seconds.
  5 reconnect the modem and wait for it to come back online.
  6 plug in the router and wait for it to come back online.
  7. turn on your laptop and test your connection.
  
  Reset the TCP/IP settings:
  
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh int ip reset resetlog.txt" without the quotes and press ENTER.
  4 restart your PC and test.
  
  Reset the winsock catalog:
  
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh winsock reset" without the quotes, and then press ENTER.
  4 restart your PC and test.

• Collect data from specific frequency of the power spectrum

  Hello

  I want to know how to collect data from specific frequency of power spectrum file. I'm trying to separate data from specific frequency of the original file.

  This will depend on much how your data is stored. You will need a way to read the file in LabVIEW and then a way to identify the data you want. I often record data in a .csv file, then I use "Reading worksheet" to get the data in a table. Then, you can simply use 'Index Array' to get the datapoints you need.

• Get the value at a specific frequency

  Hello

  I'm new to LabView. Now I have a task to develop a vi that can add value at a specific frequency automatically.

  There are two channels of signals. These data are produced by an external generator with scan function. These signals, therefore, with a different frequency. My task is to get the amplitude of the signal at a different frequency in the following table. That is, the vi can be recorded 450,9 the vi "detect" the frequency of the signal is 100 kHz. And then output a table as follows. The attached VI is to mimic the signals swept as the following table. So how can I do?

  Any help will be much appreciated.

  See you soon

  Yang

  V1out	V2out	Frequency (kHz)	Ratio
  450,9	444.5	100.0	0.99
  447,4	445,7	200.0	1.00
  445,3	445,1	300.0	1.00
  444,8	458,7	400,0	1.03
  440.9	460,7	500.0	1.04
  437.0	468,7	600,0	1.07
  429,1	488.2	700,0	1.14
  417.0	496.4	800,0	1.19
  397,6	511.7	900.0	1.29
  378.0	535,4	1000.0	1.42

  Hi Yang

  I'll send your VI with a few changes, I hope that you are looking for and I hope that this can help you!

  Concerning

• Qualcomm, atheros AR9285 802.11b/g/n wifi adapter problem

  Hi, if I can connect to the internet, but after a bit, I'm disconnected from the network. When I have the Troubleshoot, it indicates that there is a problem with my card. It is not a problem with my network as all other devices work correctly.

  I use Windows 8; my laptop is a Pavilion dv6 - 3284ca; my wifi adapter is qualcomm, atheros AR9285 802.11b/g/n wifi adapt

  Let me know if you need more information.

  You can try a USB wireless adapter. If it works, which will restrict the cause root. If it doesn't, it will restrict the issue to a conclusion. There is not a lot of troubleshooting on the left that you don't want to, so I think that an adapter is a good idea.

  Mario

• Pavilion dv6-6121tx: driver Ralink upgrade rt5390 802.11b/g/n wifi adapter with Intel Dual Band Wireless-AC 7260

  Hey guys,.

  Currently, I have the HP Pavilion dv6-6121tx Entertainment Notebook PC with the configuration below.

  Name: HP Pavilion dv6 Notebook PC
  OS: WIN 7 Home Premium 64-bit
  Processor: Interl (R) Core i7-2630QM CPU @ 2.00GHz
  RAM: 6 GB DDR3
  Graphics card: Radeon (TM) HD 6770 M 2 GB DDR5

  My laptop has a Ralink rt5390 802.11b/g/n wifi adapter driver and I want to spend with Intel Dual Band Wireless-AC 7260. I went through the below URL containing all compatible drivers. But I am not able to understand where the AC7260 from Intel is supported or not.

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-DV6-6100-entertainment-notebook-PC-serie...

  Anyone of you can guide me on this please. Thank you.

  Hello @Amjadbrsc,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!

  I came across your post about WiFi drivers and wanted to help!

  All the network drivers compatible for your product is listed under the tab Driver Network , the customer support of HP - page Software and Driver Downloads.

  Please let me know if this information has been helpful by clicking the thumbs up below.  If this post has solved your problem, then please click accept as a Solution.

  Have a great weekend!