what the 'no nat?

Similar Questions

• Access after you turn off the router/nat [WCG200 v1]

  I use the WC200v1 for a while and it was a lot of work.  I disabled the router/Nat and comes to be used as a modem only.  After you disable the routing/Nat, you are given an IP address, which still allows access to the device.  I don't remember what is this IP address.

  I have another device offering routing/WAP capability.  The WCG200 acts ONLY as a modem.

  Someone knows what IP to use to still access the device or should I just connect my PC directly after performing a factory reset.

  Thank you!

  -t0ken

  Use http://192.168.100.1/ router and Nat have been disabled.

• The Global NAT FVRF questions - for Expert

  Hi Expert,

  I have a client with a DMVPN network. Here is a simple drawing of installation:

  

  First I set the router og BRANCH1 config: BRANCH1 - Config.txt

  What the client wants is simple:

  Host 200.200.200.200 reach the host 192.168.100.2 on port 3389.

  So I thought to do the static NAT like this:

  IP nat inside source static tcp 192.168.100.2 3389 100.10.10.2 3389

  but it does not work because the BRANCH1 router is configured with FVRF who wants to say outside interface is in a VRF and local area network inside interface is globally. I couldn't see any traffic coming to the server (192.168.100.2) but I could see the translation in the nat process.

  So I tried to configure the virtual interface of NAT (NVI) I read that NVI works best in the VRF environment. This time with these lines:

  interface FastEthernet0/0
  Description * WAN connection *.
  bandwidth 20000
  IP vrf forwarding DMVPN-VRF
  IP 100.10.10.2 255.255.255.0
  IP access-group OUTSIDEACL in
  activate nat IP
  IP virtual-reassembly
  automatic duplex
  automatic speed
  !
  interface FastEthernet0/1
  Description * to connect to the computer 3 *.
  IP 192.168.100.1 address 255.255.255.0
  NBAR IP protocol discovery
  activate nat IP
  IP virtual-reassembly
  load-interval 30
  automatic duplex
  automatic speed
  No cdp enable

  IP nat source static tcp 192.168.100.2 3389 100.10.10.2 3389 extensible

  Then I finally got some entries of traffic in the server 192.168.100.2. See the Wireshark log:

  200.200.200.200 192.168.100.2 TCP stgxfws > ms-wbt-Server [SYN] Seq = 0 Win = 64240 Len = 0 MSS = 1260

  
  

  192.168.100.2 200.200.200.200 ms-wbt-Server TCP > stgxfws [SYN, ACK] Seq = 0 Ack = 1 win = 64240 Len = 0 MSS = 1460

  So far so good but but... the router sends an ICMP destination 13 unreachable code to the server:

  10.1.0.1 192.168.100.2 ICMP Destination unreachable (Communication administratively filtered)

  I guess that is because the router performs a search in the global routing table instead of the destination FVRF.

  Anyone know how I can fix this problem?

  Maybe a solution to HUB1 for this so everything is managed central, what do you thing?

  Best regards

  Laurent Rlap

  I can't spoke1 config. But first the routing needs to work and I would like to try a leak of the VRF the way in Global.

  IP route 200.200.200.200 255.255.255.255 FastEthernet0/0

  When this is fixed we can watch NAT.

  / Ralph

• startup script of VMware services - correct naming for the VMware NAT Service?

  Hello

  Because I don't want the VMware services to start whenever I start my PC, I use the following script to start the services manually.

  ECHO

  the echo of vmware

  ECHO

  net start VMwareHostd

  NET start VMware NAT Service

  net start VMwareServerWebAccess

  output

  Question: net start VMware NAT Service does not work.

  Question: what is the correct name of the Service NAT VMware?

  Thank you

  SJW

  Hello

  The commanf is incorrect. It should be like this:

  net start "VMware NAT Service"

• I was wondering what the difference was between the powerbeats 2 and the powerbeats 3. What is this new "chip" in the powerbeats 3?

  I was wondering what the difference was between the powerbeats 2 and the powerbeats 3. What is this new "chip" in the powerbeats 3?

  Hello

  Main differences are:

  • Up to 12 hours of battery life with Powerbeats3, which use chips to W1 Apple energy-efficient (vs. up to 6 hours of battery life with Powerbeats2).
  • A quick charge of 5 minutes for a typical use of an hour (vs 15 minutes to load).
  • Improved ergonomic design.

  More information:

  http://www.Apple.com/shop/product/MNN02LL/A/powerbeats3-wireless-earphones-shock-Jaune

  http://www.beatsbydre.com/earphones/browse-earphones/wireless-earphones/ML8V2.ht ml

• There is a problem Kurt iTunes does not accept that I don't know what the cause of the room!

  

  Have you tried to do what the message tells you to do and contacted the support of iTunes? What did say when you did?

• How to find out what the police are actually using Firefox?

  How to find out what the police are actually using Firefox?
  Inspect the element don't say what substitute fonts.

  Firefox 24 ESR has the tab fonts in the Inspector, which shouldn't be a problem.

  • https://developer.Mozilla.org/Tools/Page_Inspector

• Reseantly I baught iphone 6splus after a month of sum for the blank page music player is plurarite of I don't know what the problem

  Reseantly I baught iphone 6splus after a month the music player sometimes blank page is plurarite of I don't know what the problem is.

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

• Why - what the apple mouse always unplug, then reconnect. No matter the State of the battery - new or otherwise.

  Why - what the apple mouse always unplug, then reconnect. No matter the State of the battery - new or otherwise.

  When did start?  I have the same problem for about 3 days.  I downloaded and applied update of OS X El Capitan 10.11.4 Combo, ran disk utility and ran disk first aid.  Have not had a problem since (touch wood because it is only since the mid morning today).

  

• Nightshift is NOT included in my old version 9.3 of iPads news. What the *?

  Nightshift is NOT included in new 9.3 update my old iPad. What the *?

  Only the most recent devices have the ability for the night shift. Just like older devices may never have Siri or Live Photos, they simply do not have the material for the software work.

• My Mac has said that I don't have the necessary permissions, (although I repaired permissions and checked that I am an administrator of this computer) for the upgrade - what can you tell me what the problem is? Mac 10.5.8

  My Mac has said that I don't have the necessary permissions, (although I repaired permissions and checked that I am an administrator of this computer) for the upgrade - what can you tell me what the problem is? Mac 10.5.8

  This has happened

  Each time Firefox opened

  I tried to upgrade to version 2.0

  User Agent

  Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10_5_8; en - us) AppleWebKit/533.16 (KHTML, like Gecko) Safari/533.16 Version/5.0

  See http://kb.mozillazine.org/Installing_Firefox#Mac_OS_X
  .....
  If you have Mac OS X 10.5 or newer then follow these steps:

  Download a new copy of the Firefox program: http://www.mozilla.com/firefox/all.html
  Trash the current demand for Firefox to do a clean reinstall.
  Install the new version you downloaded.
  Your profile data is stored in the Firefox profile folder, so you will not lose your bookmarks and other personal data.

• Satellite L755D-S5104 - does not know what the problem

  Hello
  I keep a L755D-S5104.
  AMD A6 3420 M with Radeon 6520G
  4 GB of Ram
  500 GB hard drive.

  The problem with my laptop recently is that I am getting i/o device error (WriteToDisk) errors thus the laptop hangs / crashes with a screen of jibberish/sand-of looking.

  So far, I got error screen with my PC as well before and I'm pretty sure it's because of the unstable driver for video/chipset. I solved as before with the installation of older drivers (but for my laptop, I can't find a choice of versions)

  I don't know if my hard drive is the cause which as well (due to the error WriteToDisk) since mainly these two errors occur at the same time. Maybe my drive is in good health, but the video/chipset driver is causing the problem?

  My laptop temperatures are normal and there is no noisy fan noise etc.

  HDTune bad block scan displays the status of my drive HARD 100% OK but the chkdsk /r utility accidents near about 45000/67000 (screen white/jibberish causes), also, I have attached my laptop HARD drive to my computer and run the chkdsk utility it without error.

  I don't know what to do? Given that I've hardly know his choice of drivers for S5104. The error started to appear since the last two days and before that my laptop was perfectly fine.

  Post edited by: zeineb

  On this virtual path, it is not easy to say what the problem is. What you can try is to do some tests and, as I see you do this very well.
  Try to get the new HARD drive and install original recovery image on it and to experiment with the settings and clean the preinstalled OS. If you do this thanks for posting comments.

  By the way: all the drivers, you should be able to find on http://support.toshiba.com/drivers
  Just put Satellite L755D-S5104 from here and you will get the list of all available drivers.

• What the hell is an environment to help HP UEFi

  OK, HP support assistant told me that a new important upgrade was available for my laptop, UEFI support environment 4.2.5.0Ap1.  So maybe as a sheep I downloaded.  It creates a new partition on my hard drive (TOOLS HP) and installed.  Nothing serious took place, but what the hell did I download?  I have, of course, wrongly, that it was an update of an existing product.

  Because now I'm assuming that is I don't know what it is that I should not play with it.

  Thank you.

  Hello

  What this gives you is a user-friendly user interface more executing diagnostcs.  If you type following the esc key you start Notepad, you will be able to select this diagnostic menu (f2 key).

  For example, if you want to run a test on the drive hard or memory, this use is in the meu to bios (f10) where you browse and run the tests using the arrow keys and touch.  Menu diagnosis uefi will allow you to choose a variety of tests using the Mouse/touchpad in the same way that you access Windows.

  The new partition (HP_TOOLS) contains the files needed to support this interface.

  Another point to note is that this provides also a safer way to update the bios if you need to-instead of the bios flash running in Windows, in the environment of uefi, the flash occurs after the machine is restarted - that is to say before Windows loads.  It is usually safer that software which may interfere with a flash of the bios (software security etc.) is not running.

  Personally, I would only update the bios if it solves a problem you have or adds features that you need.

  Kind regards

  DP - K

• Concerned about the compatibility and performance of i-Tunes if I install Windows 10 on my pc.  Can we predict what the problems are?  What solutions are there?  Thank you!

  Concerned about the compatibility and performance of i-Tunes if I install Windows 10 on my pc.  Can we predict what the problems are?  What solutions are there?  Thank you!

  ITunes 12.3 running on Windows 10 and it works great. Any questions or problems with it.

• What the 'cinematic' on the F5, F55 look?

  Ive been carefully after the F5 and F55 and my only concern was that most of the images shown so far has this 'look of Sony' (very strong and cooked in the oven) and less cinematic than saome of the other high-end cameras. I LOVE all things/functions/form of the new Sony factors but the so-called 'look' is what the customers want ultimately to feature films.

  I've recently went to the AbelCine event and was side by side the F65, F55. The F65 was nice and film but the F55 just seems so much.

  But someone on the mailing lists said they turned a few fottage and put to will/Aces and they said that the movie was a lot more cinematic.

  WHEN will be shot footage in the settings/formats more cinematic etcs. and placed in a good program with a good colorist for once that in for all that I can feel comfortable buying a premium movie camera that has a high-end "FILM" look?