What to do...   When I start photoshop cc I get a blue screen of death Kernel_security_check_failure?

Similar Questions

• Whenever I start my computer, I get the blue screen of death. I'm not getting in what concerns the opening of session and there is no prompt to start in safe mode. Whenever I start my computer the error code and message on blue screen are different.

  I have Windows Vista Home Premium. I was on the internet when my computer screen turned blue and a message told me that a problem has been detected and Windows has been shut down. He said that I had tried to do something with memory executable not executable (I don't have a note of the code). He said as he poured out memory. Now, whenever I start, the blue screen of death gives me different messages and different error codes. Today, he says:

  IRQL_NOT_LESS_OR_EQUAL

  and codes of error STOP: 0x0000000A (0x0000001B, 0 x 00000600, 0x810A90B0, 0x00000001).

  PC World say that they need to reinstall Windows, but I have some really really important files on there that I have not supported (I know, really stupid on my part) and they said they cannot guarantee their recovery. Is there another way to fix it?

  I've been on the forums and suggestions involve me to be able to connect to my computer. Blue screen hits me before I can log on, and there is no prompt to start in safe mode.

  Thank you very much!

  Try this to save your data:

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1 in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.
  Mick Murphy - Microsoft partner

• When I start my computer I get a blue screen saying "unmountable_boot_volume".

  original title: Blue Screen of Death

  When I turn on my PC, it goes to the blue screen of death which says: unmountable_boot_volume, then it displays information about the new hardware or software, then:

  Technical information:

  Stop: 0x000000ED (0x8737D980, 0xC0000006,

  Do you mean something like this:

  STOP 0X000000ED (XXXXXXXXXXXXXXXXXXXX)
  UNMOUNTABLE_BOOT_VOLUME

  where XXXXXXXXXXXXXXXX is a bunch of giberish?

  If so, you could give this link, at a glance:

  http://support.Microsoft.com/kb/297185

  Note that there could be a loss of data.

  Hope this helps

  Post back if necessary

  _______________________________________________________

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Why do I get the blue screen of DEATH most of the time when I try to print on my HP Office Jet printer?

  Why do I get the blue screen of DEATH most of the time when I try to print on my HP Office Jet printer?  Almost everytime I try to print to the printer HP Office Jet m I get the Blue Screen of Death in the middle of printing or shortly after that my document is printed.  I then have to shut down my computer and restart it.  I am running Windows 7.

  We need the log files themselves (called a DMP files) because they contain the only record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.
  
  
  
  
  Please follow our instructions to find and download the files, we need to help you fix your computer. They can be found at here

  If you have any questions regarding the procedure, please ask
  
  

• When I print, I get the blue screen of death.

  I'm running an Asus U47A, intel i7, 8 GB of ram.  Bought a printer cheap for the College, the printer HP Deskjet 1000 J110a (printer of $ 30 million).  Please don't tell me I'm cheap and I should have bought the model upward, it would not be useful.  Whenever I have print or the print job will complete successfully, either during the print job, my PC will crash and gives me the blue screen of death.  What should I do? I uninstalled the printer drivers, reinstalled them, check the updates, and install them directly from the HP site... you name it.  I am ready to throw my head through the wall because I need to print frequently and having my computer crash in the middle of a document is not what I need.

  Any help would be greatly appreciated, thank you very much.

  In addition, the issue may be the iusb3xhc.sys:

  Bugcheck 1E, {0, 0, 0, 0}

  WARNING: Unable to verify timestamp for iusb3xhc.sys
  ERROR: Module load completed but symbols can be loaded for iusb3xhc.sys

  The iusb3xhc.sys, which is dated December 5, 2011 is an Intel USB 3.0 driver.

  Try to update the iusb3xhc.sys by installing the next update:

  http://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=21129

  The same error was reported by other users, as in the following link:

  http://www.SevenForums.com/crashes-debugging/236644-BSOD-mostly-when-printing-photos-Ntoskrnl-exe-iusb3xhc-sys.html

  If the error persists, try the printer on another USB port such as the USB 2.0 port.

  You might also uninstall the Intel USB 3.0 driver and let the USB ports operate at 2.0 speed as which seems to have stopped errors blue screen in the link above for a user.

  Also, another printer, not necessarily a more expensive, but a different brand or model may not exhibit the same problem.

  You might try using a printer if possible.

• STOP OXOOOOOO1E (OXFFFFF8OOO373121E, OXOOOOOOOOOOOOOOOO, OXFFFFFFFFCOOOOOO5, OXFFFFFFFFFFFFFFFF. I downloaded a game I trusted and when I try to play multiplayer... blue screen of death appears...

  I don't know what to do... I'm young and not very educated throughout to fix something on the computer. Help from anyone who would be accepted with relish. Please help me, I don't understand what the problem is.
  STOP OXOOOOOO1E (OXFFFFFFFFCOOOOOO5, OXFFFFF8OOO373121E, OXOOOOOOOOOOOOOOOO, OXFFFFFFFFFFFFFFFF, here's the (what's this?) Drivers?) thingies that get on the screen. It says to make sure that the download was complete, which was, and other things I do not remember... I don't know what the problem so if someone could help me please, I'd be a happy girl.

  Jamie,
  If you still experience this problem then there are a few things you can try to start with and also some other information, we could use.

  We need to know things:
  What version of Vista and what service pack level.
  The game that you are trying to read.
  The full error message.

  You can try things:
  Make sure that the program is compatible with Vista. Windows Vista Compatibility Center
  Make sure that there is no infection virus\malware.  This thread has some great information: get rid of malware  
  Run the Windows Memory Diagnostic and make sure that it is not a problem with your RAM.
  Perform a clean boot of your system and then run the program.
  Make sure that your graphics driver is up to date.  Update a driver

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Computer stops when I try to run games, gets the blue screen locale ID: 4105

  Original title: blue screen, I don't know what to do

  Hi, for the last days of couple and officially from last week, my computer went to the blue screen with problems of memory, it seems.  I'm not very good with the technical part of the computers and I finally know what to do.  It gave me an error report which stops just when I try to use the search for a solution button.  He mostly stops when I try to run games on it, but sometimes he does when I'm not even in it. The last report of error was:

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.256.1
  Locale ID: 4105

  More information about the problem:
  BCCode: 1a
  BCP1: 0000000000005003
  BCP2: FFFFF781C0000000
  BCP3: 0000000000014FAD
  BCP4: 00014FAF00029F5F
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 256_1

  Files helping to describe the problem:
  C:\Windows\Minidump\050715-7051-01.dmp
  C:\Users\Ryan\AppData\Local\Temp\WER-11575-0.SysData.XML

  Please help me. I'm at a loss to know what to do.

  We need the log files themselves (called a DMP files) because they contain the only record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.
  
  
  
  
  Please follow our instructions to find and download the files, we need to help you fix your computer. They can be found at here

  If you have any questions regarding the procedure, please ask
  
  

• X220t Gets a blue screen of death when connected to HDTV

  When I connect my x220t to my 47 "HDTV via hdmi with HDMI / display port adapter, the image comes back, but it is not the right proportions. I'm trying to solve this problem by going to the screen resolution or graphics properties, but as soon as I change a setting in both, my x220t shows the blue screen, or just no picture at all and must restart. I have connected to my 25 "monitor hd via hdmi and hdmi for display adapter port so those who are not the problem. Help please!

  Apparently, it's the adapter. I recently bought a new adapter, this time a cable with a male display port and a male hdmi port and it works like a charm. The former who was a male to female hdmi port display port does not work. This is the solution. Thank you very much for your help!

• On my pc under xp service pack 3... When I start it up I get the login screen, but won't let me log on. How can I fix it?

  I can't log my office xp service pack 3 e - machine. the window appears with my name, but it does show a hand cursor and does not allow me the normal block for my password. I am the Admin so how to solve this problem and open a session?

  You can try to boot mode safe (repeatedly press F8 during startup).  Somehow, I don't think it works well.

  If this does not work, then you need start the console recovery and perhaps running a disk with the /F option verify operation undertakes to repair the problem.

  "How to install and use the Recovery Console in Windows XP"
    <>http://support.Microsoft.com/kb/307654 >

  If you need to back up all the data on your machine, you can create and start from a CD bootable for example BartPE, UBCD4Win, Hiren Boot CD or a live CD Linux such as Knoppix.  This will allow you to back up files on a USB key or via the network as a final step before reinstalling Windows.

  HTH,
  JW

• Whenever I start my computer, I get a blue screen STOP: 0X0000007E.

  I have Windows Vista Home Premium on an IBM Thinkpad T60p.

  I can start my computer in safe mode and log on and use some applications.
  Sometimes I can access the login (in normal mode) screen, sometimes even not far away.
  I get the error code is always:
  STOP: 0X0000007E (0XC0000006, 0X81CFFB72, 0X8B5BA930, 0X8B5BA62C)
  Please tell me how to fix this or that Microsoft help me.

  Could be a nuisance pilot. Update your drivers manually looking at system manufacturer and
  Sites of the manufacturer of the device.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
  each driver in the list, additional useful information is displayed: load address of the driver, description,.
  version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This
  because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
  pilot - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• I delete everything on my computer and start all over again, but don't know where to start. I have tons of viruses and get the blue screen of death.

  My computer specs are:

  Windows vista edition Home premium
  service pack 2
  System
  Manufacturer: zoostorm
  model: 45CMX VP series M3
  32 bit

  http://Windows.Microsoft.com/en-us/Windows/help/install-reinstall-uninstall

• Windows blue screen of death (ASF) when I play Garrysmod

  Windows blue screen of death (ASF) when I play Garrysmod

  Hey,.

  When I started to play Garrysmod (GMod) as blue screen arrives (happened 2 twice now)...

  Signature of the problem:
  Problem event name: BlueScreen
  The system version: 6.1.7600.2.0.0.256.1
  Locale ID: 2057

  More information about the problem:
  BCCode: 101
  BCP1: 0000000000000061
  BCP2: 0000000000000000
  BCP3: FFFFF880009E7180
  BCP4: 0000000000000001
  OS version: 6_1_7600
  Service Pack: 0_0
  Product: 256_1

  Operating system: Windows 7

  Graphics card: Nvidia Geforce 9800 Gt

  If you want something else, ask here.

  Help, please!

  Thank you

  Christopher Kelly

  CEO Christopher Kelly - ChrisJets432 - ChrisJets Corporation - Check http://cjcw.sm4.biz/ for updates, etc.

  Right, I found the problem, the card (s) has an addon called HDR source and what is the cause of the crash.
  For example on gm_construct that I never go on the plan, due to the fact it triggers it

• Problems with the blue screen of death (when my computer is shut down)

  I get a blue screen of death on occasion, when shutting down my computer (Windows XP, Dell Vostro). It started happening after I installed the latest version of the Synology NAS software. This is the message: BCCode: 100000d 1 BCP1: BA3F1F20 BCP2: 00000002 BCP3: 00000008 BCP4: BA3F1F20 OSVer: 5_1_2600 SP: 3_0 product: 256_1. Additional technical information: C:\DOCUME~1\admin\LOCALS~1\Temp\WER4098.dir00\Mini021112-01.dmp and C:\DOCUME~1\admin\LOCALS~1\Temp\WER4098.dir00\sysdata.xml.

  Not sure if it is related to the installation or if it is another problem. Any advice would be appreciated.

  The minidump file showed a DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1) referencing the usbccgp.sys (common class generic Parent Driver USB):

  BUCKET_ID: 0xD1_CODE_AV_BAD_IP_usbccgp+ 1f20

  The spoolsv.exe (print spooler service) is the process that crashed.

  You have recently installed a USB printer?

  In any case there may be a problem with the USB stack in Windows XP Service Pack 3 so I recommend you to install the following fix can correct a problem of 'timing' of USB that can be useful for the error you receive:

  http://support.Microsoft.com/kb/969238

  There is a link at the top of the article to request the hotfix.

  There was a driver of Synology (busenum.sys) loaded during the crash, but it does not appear to be involved in the accident.

• When I start my computer I get this error message: Windows cannot open this file: GLBD4EA.tmp

  When I start my computer, I get this error message:

  Windows cannot open this file: GLBD4EA.tmp

  To open this file, Windows needs to know what program you want to use to open it. Windows can go online to look for automatically, or you can manually select from a list of programs installed on your computer.

  What do you do?

  -Use the web service to find the appropriate program
  -Select a program from a list of installed programs

  No selection works for me. I don't know what concerns the .tmp file, or why I need to open it.

  Please help :)

  Hello

   
  Perform the following steps to remove the file from the registry.
  a: type regedit into the search box start and click on enter.
  b: Search now to the following key
  HLKM\SOFTWARE\Microsoft\windows\currentversion\run
   
  then delete the following key
  53E412B3-9907-4F9E-A6DC-D0106D1D72C
   
  Important:  This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information
  However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/)
   
  Hope this information helps.

• When I start my computer I get an error message about V protect Application on the Windows XP-based computer

  When I start my computer, I get an error message, "V Protect Application has encountered a problem and needs to close".

  System information Utility version 1.0.0.1

  OS version: Microsoft Windows XP Home Edition, Service Pack 3, 32-bit

  Processor: Intel (r) Celeron (r) CPU clocked at 2.66 GHz, x 86 Family 15 Model 4 Stepping 1

  Number of processors: 1

  RAM: 1 GB

  Graphics card: RADEON 9250, 128 MB

  Hard disks: C: Total - 76316 MB, free - 47785 MB; KC: total - Mo 305168, Free - Mo 304760;

  Motherboard: MICRO-STAR INTERNATIONAL CO., LTD, P4M266-8233,

  Antivirus: AVG Free Antivirus, update: Yes, On-Demand Scanner: enabled

  I run the above system and would appreciate any help with the removal of this message as if I don't send it to Microsoft, it goes.

  Thank you

  Roy.

  You can try those Microsoft committed the 'experts' ideas Support Engineer (1, 2, 3) for safe, clean boot Mode, Online Scanner, but I think that most of the people who know how XP would recognize that there is no component 'V protect' in Windows XP and a simple search Google reveals that your problem is with your AVG software and has nothing to do with Windows XP.

  You should look in their forums (like me) and here's what they suggest:

  Vprotect belongs to AVG Security Toolbar.
  Please try to run repair installation using the latest installation package.

  If the problem persists, please follow all the steps in the instructions to complete reinstallation .

  I think that if I were you, I would follow the instructions on the page AVG to uninstall and reinstall your AVG because there may be other parts of AVG who are afflicted that you have not yet discovered, but in AVG, some people with V forums protect problems find that AVG repair install works.