SRP520 router with NexStar FX NAS

Similar Questions

• Model of router with WPS

  Hi my TV a WPS button my router N300 model [WNR2200] has no WPS button. What router do I need to connect to broadband?

  Any router with a WPS option. Or use your router and enter the appropriate security settings.

• Access to the COR to two XP systems behind a router with a single public IP address

  Hello

  is it possible to access the RDC to two XP systems, with two different port for the DRC, behind a router with a single public IP address?

  Please note this ia a small home network without any parameters of the field. I use IP to access DRC.

  You comments are appreciated.

  Thank you

  Use different ports for the DRC on both XP and configure the router to redirect to the appropriate port on the appropriate computer.

  See the article in the Microsoft Knowledge Base How to change the listening port for remote desktop .

• Wired router with POE and Gigabit ethernet to run two AC1750 access points?

  Hello, I'm looking for a recommendation for a wired router with POE and Gigabit ethernet to connect to both access to ceiling LinkSys AC1750 points internet routing on the WAN to a Virgin Media UK cable connection plug - can someone advise a good solution?

  I'm a Home Office / Small Office so user there are several Wired's devices and a mixture of wireless clients. I need at least 8 ethernet outlets. Reliablity and speed performance are important, but not important enough to go overboard on the cost!

  Many thanks to you all.

  I recommend a router Linksys (SMB) LRT214\224 and a switch POE LGS Linksys (SMB). This combination will be very fast and stable.

• When I try to connect with my wireless laptop will connect only to Local access. If I connect the laptop to the router with the ethernet cable, it works very well.

  VIsta - Local access only

  HI -.
  I recently moved.   I use the same router from my old apartment and I had no problem connection in the past.   Since I moved I have a new Time Warner modem (Cisco) and the modem works fine.

  The router also works very well I'm able to connect with my iPhone and IPad without any problem.

  But when I try to connect with my wireless laptop, it will only connect to Local access.    If I connect the laptop to the router with the ethernet cable, it works very well.

  It's a Dell Studio 15 with Vista.

  The computer is able to connect to wifi to other places without any problem, but for some reason that I can't connect home.   I tried to reset the modem and the router several times, but that did not help.   I tried the option repair & diagnose several times but it doesn't work.

  I tried to look for other solutions online and tried to disable IPv6, and while it helped some and I was able to connect wireless, the computer ran so slowly that it didn't seem like a good solution.

  This has been very frustrating.   Thanks in advance for any help or suggestion.
  Staci

  Hello Staciusa,

  Have you tried to change the wireless channel that your router is running at? There may be interference that could prevent the internet connection:

  Take a look at step 6 in this article that give more details about it:

  http://www.Microsoft.com/athome/Setup/wirelesstips.aspx

  If you need assistance to change the settings of the specific router, you will need to contact your router manufacturer or your internet service provider.

• WRTP54G (wireless router with phone connection) with Panasonic BL-C30A network camera (WEP only)

  Hello

  I would use this wireless router with WEP I can access the wireless camera (camera does only WEP encryption).
  The camera should be the only device authorized to connect to this wireless router.
  I can devote channel 11, so only use this wireless router
  I know that WEP can be cracked but I think maybe I can set up the router for it does not matter, i.e.,.
  While the camera is accessible by this particular router

  so my questions are:
  1. can I configure the router so only local outgoing LAN requests http are allowed?
  2. any other suggestions about the configuration of router that prevent access to my network?
  (using address filtering (by address mac camera only) MAC is worth, but I guess that the MAC address can be spoofed so not a complete solution)

  Thank you
  Tom

  I think that 'toomanydonuts' has provided my solution in this thread:

  solution wire

  Thank you

  Tom

• Problems with my 4 port Gigabit Security Router with VPN

  OK, I got a wireless router and I have a Web site hosted by 1and1.com and I could connect my fine site. But recently I got the 4 port Gigabit Security Router with VPN and since then I have not been able to connect to it even, I started my own ftp server it always blocks and it will capture everything until she tries to recover the files, then it expires just after a while

  What is the model number of your device? If you have a Web server and an FTP server behind the router, you will need to transfer the ports used by the said request. Ports TCP 80 and TCP 21.

• Unable to connect to the router with Win 7

  I can't connect to my router with os Win 7. I have XP & Vista partitions on the same machine without any problem. Keeps giving me the default ip address 169.254.   I did the release, renew, map unistall, policy changes, the static settings and just about everything else I could think of. It is connected at a given time, but not anymore. Same router. My HP mini with Win 7 has no problem of wired or wireless connection. Is there a registry editing as I do or other settings I can try. I disabled V6 and others. Any help would be appreciated. Thanx.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• When you try to add a network route with the "route add" command in the command line, I get the message "the requested operation requires a rise."

  Elevation required to route add command

  When you try to add a network route with the "route add" command in the command line, I get the message "the requested operation requires a rise."  What is the correct syntax to use?

  You can watch using the PowerShell...

  http://TechNet.Microsoft.com/en-us/library/bb978526.aspx

  http://TechNet.Microsoft.com/en-us/scriptcenter/dd742419.aspx

  .. .and post questions about Windows PowerShell forum...

  http://social.technet.Microsoft.com/forums/en/winserverpowershell/threads

• RV082 - routing with quickvpn issues

  Hi all

  I ve a special configuration to my network, we have about 20 sites managed by an external supplier. Last week, we bought a Linksys RV082, in order to enable remote access in our network.

  It is possible to configure the router with an ip address public luckily. We are currentliy use tar on the firewall to allow access to the router. / * Style definitions * / table. MsoNormalTable {mso-style-name : « Normale Tabelle » ; mso-tstyle-rowband-taille : 0 ; mso-tstyle-colband-taille : 0 ; mso-style-noshow:yes ; mso-style-priorité : 99 ; mso-style-qformat:yes ; mso-style-parent : » « ;" mso-rembourrage-alt : 0 cm 5.4pt cm 0 5.4pt ; mso-para-margin : 0 cm ; mso-para-marge-bottom : .0001pt ; mso-pagination : widow-orphelin ; police-taille : 11.0pt ; famille de police : « Calibri », « sans-serif » ; mso-ascii-font-family : Calibri ; mso-ascii-theme-font : minor-latin ; mso-fareast-font-family : « Times New Roman » ; mso-fareast-theme-font : minor-fareast ; mso-hansi-font-family : Calibri ; mso-hansi-theme-font : minor-latin ; mso-bidi-font-family : « Times New Roman » ; mso-bidi-theme-font : minor-bidi ;}

  IP nat inside source 192.168.5.180 static and external IP address

  When I opened the public ip address in my browser I can access the web interface of the router. So far so good.

  The WAN Interface is configured as follows

  Static IP 192.168.5.182

  Subnet 255.255.255.0

  Gateway 192.168.5.254

  DNS 192.168.1.1

  The unit is configured as a router (with the two RIP) and a 192.168.252.1 IP address. (This network is unique in our company)

  The firewall is disabled

  HardwareVersion 2

  When one add a pptp user and enable the pptp, I m able to access each subnet in our company server

  When I add a user QuickVPN and successfully establish a connection, I m unable to access any subnet/Ip in our company. Only the WAN IP 192.168.5.182 is ping-able. I can't ping any device, neither the 192.168.252.1 nor the 192.168.5.10

  This is the routing table when you're connected via pptp

  List of Routing Table entries

  Destination IP address	Subnet Mask	Default gateway	Hop Count	Interface
  192.168.252.1	255.255.255.255	*	50	ppp200
  192.168.252.200	255.255.255.255	*	0	ppp200
  192.168.5.0	255.255.255.0	192.168.5.182	0	ixp1
  192.168.5.0	255.255.255.0	*	40	ixp1
  192.168.5.0	255.255.255.0	*	45	ipsec0
  192.168.252.0	255.255.255.0	192.168.252.1	0	ixp0
  192.168.252.0	255.255.255.0	*	50	ixp0
  by default	0.0.0.0	192.168.5.254	40	ixp1

  My questions,

  How to configure the device to access the network via quickvpn as pptp?

  My goal is accessible?

  I ve no more ideas, the I ve found anything in the internet, or on google, nor in this forum that match my troubles.

  Please give me your comments, regards dario

  PS: Sorry for my bad English...

  It will be difficult, especially because QVPN does not allow you to configure it to several networks. The reason why PPTP and QVPN work doesn't have is the Protocol in use. QVPN use IPSec in which you specify the authorized networks, where in PPTP you log only the user to connect to the device or the server. There are ways to deceive our router so that we can make what you need, but it is not easy and you are limited to the number of users who can use the connection. I wrote a couple of 'how to' using IPsecuritas for Mac and also shrew VPN. You will not be able to get several subnets with the QVPN customer.

• low-cost router with DHCP 66 option

  I'll try to find the lowest cost of the Cisco router with option 66.  I use the router in conjunction with spa50x phones and must be able to ensure the configuration at startup.

  I used the srp521.  It was suggested to use the isa550, but who just got an end of LIFE.  All routers of RV supports, I don't the have not found on a rv110 and I know that's not on the rv042.  It seems to me that it is a feature that should be on a router to a small business.

  Sage

  Sage

  I was also looking for a replacement for the SRP521.  I found this in the Guide of the administrator for the RV180:

  

  

  You can also try emulators of RV here, https://supportforums.cisco.com/community/netpro/small-business/onlinedemos.

  Stephen

• Can I update (IDS) signatures to a router with IOS/FW/IDS?

  I have a router with IOS FW/IDS version 12.2.3 3725. Can I update the IDS signatures?

  Sorry, but isn't the answer. IOS IDS signatures are hard coded in the code of IOS. They are rarely updated. All you can really do is allow them or not and some simple check of what they catch.

  HTH,

  Travis

• VPN router to router with overlapping of internal networks

  Hello Experts,

  A small question. How to configure a VPN router to router with overlap in internal networks?

  Two of my internal networks have ip address 192.168.10.0 and 192.168.10.0

  No link or config will be appreciated. I searched but no luck.

  Thank you

  Randall

  Randall,

  Please see the below URL for the configuration details:

  Configure an IPSec Tunnel between routers with duplicate LAN subnets

  http://www.Cisco.com/en/us/Tech/tk583/TK372/technologies_configuration_example09186a00800b07ed.shtml

  Let me know if it helps.

  Kind regards

  Arul

  * Please note all useful messages *.

• Difference b/w PIX & router (router with the firewall option)

  Hi all

  I want to know that how we can differ with router (router with the firewall option) PIX bcz can also make Staefull packet filtering. What PIX device that reviewed by the customer to use PIX of the router.

  Thank you best regards &,.

  Guelma

  Hello

  There is a discussion in this forum on this topic; Check "Firewalling: PIX vs IOS Firewall" last conversation was released January 10, 2006. Let me know if it helps.

  Rgrds,

  Haitham

• Modem/wireless router with USB port

  Qwest (my IP) told me that there is nothing like a modem/router with a USB port.  Am I crazy or what?

  Karibou

  Hello
  Welcome to the HP Forum!

  Karibou wrote:

  Qwest (my IP) told me that there is nothing like a modem/router with a USB port.  Am I crazy or what?

  Qwest is wrong. There are a number of manufacturers that make routers wireless with USB ports. This is a new trend.

  D - Link makes this one. Unfortunately, it has been abandoned. Linksys makes this one.

  Belkin makes one in this video.