What units supported multiple incoming L2TP VPN connections?
Hello. I have a Mac OS X Server I want to use as a VPN L2TP server for my remote Mac clients. There the Linksys routers that support multiple incoming L2TP connections? (Remote clients are 1 person per one place, so it won't be a problem with several outgoing VPN clients where they are).
Thank you
David
Message edited by dmcheng on 14/09/2006 13:38
Tags: Linksys Routers
Similar Questions
-
Disable ipsec for l2tp vpn connection?
Hello
How can I disable ipsec for l2tp vpn connection? I use a linux vpn that offers only l2tp. I remember doing this with winxp in regedit.
[HKEY_LOCAL_MACHINE/SYSTEM/CurrentControlSet/Services/RasMan/settings] "ProhibitIpSec" = DWORD: 00000001
How is it possible in win7?
Thank you.
Thank you for visiting the Microsoft answers community site. The question you have posted is related to Linux and would be better suited to the community network. Please visit the link below to find a community that will provide the support you want.
http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads
-
L2TP VPN connects but won't see network drives
Hi all
I just got a MacBook Pro with El Capitan. I joined it to my area of work and I have implemented SonicWall VPN Client Mobile and I tested it on and it works - only if my network, I am connected to and the VPN will not have the same IP range.
I would like to use the integrated VPN L2TP client, but I have questions here. I have configurted on my Dell SonicWall and connect this VPN from a remote location, it will connect and show the data transfer (sending / reception are green) but I can not access my network drives.
Once I have switch back to Mobile Client VPN SonicWall, everything works well.
Any idea?
Routing on L2TP or PPTP will probably work or at all, if both ends of the VPN tunnel terminate on the same CIDR network block. Which is why people never give a one VPN server address local 192.168.1.0/24. the network block is much too common. Please use something in 10.x.x.x.
-
cannot make a l2tp vpn connection
I can't make a conection to my vpn server.
Phone says connecting and going to disconnected.
I tried several times but it doesn't work.
My nexus 7 (4.4.2) can connect without problems via wifi and internet that is shared through my xperia.
before shared key and username and password are correct.
Please advice.
Jasper
We got a SergioPL test account that has helped us to find the cause of this problem. It will be fixed in a future software update.
-
Microsoft L2TP VPN to ASA 5520
I am trying to configure an L2TP VPN connection on an XP laptop. On the SAA, I use the DefaultRAGroup and the DfltGrpPolicy. I put DefaultRAGroup to use a pre-shared key, and set the authentication of users on ACS_Radius. Our ACS server is associated with AD. Anyone know if I can use ACS to authenticate this user type or do I have to create local accounts on the SAA?
When I try to connect from the laptop, I get error 789. On the ASA, I see this:
Group = DefaultRAGroup, IP = 63.xxx.xxx.xxx, PHASE 1 COMPLETED
Group = DefaultRAGroup, IP = 63.xxx.xxx.xxx, error QM WSF (P2 struct & 0xcddc7d28, mess id 0x46986b08).
Group = DefaultRAGroup, IP = 63.xxx.xxx.xxx, peer of withdrawal of correlator table failed, no match!
Group = DefaultRAGroup, username =, IP = 63.xxx.xxx.xxx, disconnected Session. Session type: IKE, duration: 0 h: 00 m: 00s, xmt bytes: 0, RRs bytes: 0, right: Phase 2 Mismatch
On the one hand, it seems that the laptop is not sending the username and password. I've tried a lot of different combos on the side of microsoft MSCHAP and MSCHAPv2, both of them or all of them individually and matched this setting on the SAA. No matter what, I get the same error. Anyone have any ideas?
Yes... I have never trusted guys for the configuration, I got the following errors:
1 L2TP requires a mode of transport must be of the type of IPSEC traffic used, your config seems to refer to the one, yet it is not defined:
Crypto ipsec transform-set esp-3des esp-md5-hmac TRANS_ESP_3DES_SHA
Crypto ipsec transform-set
Transit mode TRANS_ESP_3DES_SHA<-(needed>-(needed>
2. the present set of transformation is not attached to dynamic cryptography so not used:
Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
It should look like:
Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5 TRANS_ESP_3DES_SHA
Finally, it is just to clear up, make sure that your server ACS_Radius is indeed enabled for authentication MS-CHAPv2 of ASA and the l2tp client, otherwise it will fail always.
-
creates a VPN connection so that I can take a connection away from my house
Hi team,
I work in an organization. Every night I lock my computer with background tasks as syncing files or downloads to occur. The next day morning I come and see that the download could be interrupted (Failed) because of the loss of the internet. Which means that the internet is not active. Synchronization of files even will be pasted in the half of the progress. Don't know what is the problem and why didn't the network disconnects.I few of my colleagues who do the same thing, but they are not facing this problem. During the day, when I work - I don't really see any problem. There is no disconnect and no problem at all.I wanted to check what is happening and created a VPN connection so that I can take a connection away from my home. But I wouldn't be able to connect to my computer because of the loss of network or whatever.Help, please.I connect using WIFI on my laptopI have Lenovo ThinkPad Edge.Windows 7Hello
The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.
-
When I click on VPN connection this "PPP link control protocol was stopped. (Error 734) "is displayed.
The PPP link control protocol was terminated. (Error 734) For troubleshooting on measure for that information
What should I do?Hello
· Using a modem connection?
· You did changes to the computer before the show?
· Are you connected to any server?
I suggest you to try the suggestion of linking and check if it helps:
"Error 734: the PPP link control protocol was terminated" Error Message occurs if you try to establish a Dial-Up connection
http://support.Microsoft.com/kb/318718
Note: ignore the application of article.
-
Multiple VPN connections using 871 router
Hello
I have the cisco router 871 at the site of the retail that connects to the corporate site. I also want to connect a device to the sharing network partner, but it needs to connect to their virtual private network. Is it possible to configure the 2 VPN connection to 2 different company sites in this scenario?
Thanks for your help.
Umesh.
Hello
You can configure multiple VPN tunnels on the router (whether on the same interface or different interfaces).
You can then perform the traffic from a tunnel in another tunnel, if you must do the same.
Federico.
-
Multiple site to site VPN connections
Hello.
I've finally set up a site to site VPN connection and now wonder how I can configure multiple connections that are accessible by different VLAN.
So that VLAN1 use a tunnel and VLAN2 another.
Best regards Tommy Svensson
Configuration up to now:
crypto ISAKMP policy 10
BA aes 256
preshared authentication
Group 5
life 3600
vpnkey crypto isakmp key address?. 206
!
!
Crypto ipsec transform-set VPN aes - esp esp-sha-hmac
!
VPNMAP 10 ipsec-isakmp crypto map
Site 2 site description
defined by peers? 206
security-association the value of life 4000 kilobytes
game of transformation-VPN
PFS Set group5
match address 100access-list 100 permit ip 10.10.1.0 0.0.0.255 192.168.3.0 0.0.0.255
Hi Tommy
In order to complete their reviews of Marcin, something like this should help (obviously you need to change the IP addresses accordingly).
VPNMAP 10 ipsec-isakmp crypto map
Site 2 site description
defined by peers? 206
security-association the value of life 4000 kilobytes
game of transformation-VPN
PFS Set group5
match address 100!
VPNMAP 20 ipsec-isakmp crypto map
Description site-2-site n ° 2
defined by peers?
security-association the value of life 4000 kilobytes
game of transformation-VPN
PFS Set group5
match address 101access-list 100 permit ip 10.10.1.0 0.0.0.255 192.168.3.0 0.0.0.255
access-list 101 permit ip x.x.x.0 0.0.0.255 y.y.y.0 0.0.0.255
Barry
-
Issue of ASA L2TP VPN error QM WSF
Hello guys
Facing the issue with new support for .do L2tp connection on this you can
L2TP is terminiated on ASA and ASA before there is a router where ASA outside interface is coordinated to the public IP address
Here is the config and the logs.earlier of debugging that she was unknown to the Group and now tunnel is not eslablshitng to my machine via l2tp
ASA 5,0000 Version 59
access-list acl - scope ip allowed any one
acl_outside list extended access permitted ip object-group HQ ABC object-group
acl_outside list extended access permit tcp any host 10.10.20.10 eq 5269
inside_nat0 list extended access permitted ip object-group ABC object-group HQ
inside_nat0 list of allowed ip extended access all 10.1.252.0 255.255.255.0
DefaultRAGroup_splitTunnelAcl list standard access allowed 10.0.0.0 255.0.0.0IP local pool vpngroup 10.1.252.1 - 10.1.252.253 mask 255.255.255.0
Global 1 interface (outside)
NAT (inside) 0-list of access inside_nat0
NAT (inside) 1 0.0.0.0 0.0.0.0Crypto ipsec transform-set esp-3des esp-sha-hmac trans
Crypto-map Dynamics dyno 10 transform-set ESP-3DES-MD5-TRANS trans
card crypto 65535-isakmp ipsec vpn Dynamics dyno
vpn outside crypto map interface
crypto isakmp identity address
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
sha hash
Group 2
lifetime 28800
Crypto isakmp nat-traversal 3600internal DefaultRAGroup group strategy
attributes of Group Policy DefaultRAGroup
value of 10.1.16.11 DNS server 10.1.16.13
VPN-idle-timeout no
VPN-session-timeout no
Protocol-tunnel-VPN l2tp ipsec
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list DefaultRAGroup_splitTunnelAcl
by default-field valuexyz.com
Split-dns value xyz.com
enable dhcp Intercept 255.255.0.0
the authentication of the user activation
attributes of Group Policy DfltGrpPolicy
Protocol-tunnel-VPN IPSec l2tp ipsecpassword cisco KCtylQW4545gfddN6mbi93ijmA user name is nt encrypted
attributes username cisco
Protocol-tunnel-VPN l2tp ipsec
type of remote access service
IPSec-attributes tunnel-group DefaultL2LGroup
pre-shared key *.
attributes global-tunnel-group DefaultRAGroup
vpngroup address pool
Group Policy - by default-DefaultRAGroup
management of the password password-expire-to-days 30
IPSec-attributes tunnel-group DefaultRAGroup
pre-shared key *.
tunnel-group DefaultRAGroup ppp-attributes
ms-chap-v2 authentication===========================
Debug logs:
EQ-INTFW01 # Apr 04 14:59:36 [IKEv1]: IP = 195.229.90.21, IKE_DECODE RECEIPT Message (msgid = 0) with payloads: HDR + SA (1) +.
SELLER (13) of the SELLER (13) of the SELLER (13) + the SELLER (13) + the SELLER (13) + the SELLER (13) + the SELLER (13) ++ NONE (0) overall length: 38
4
Apr 04 14:59:36 [IKEv1 DEBUG]: IP = 195.229.90.21, SA payload processing
Apr 04 14:59:36 [IKEv1]: failure of Phase 1: incompatibility of the types of attributes of class Group Description: RRs would be: unknown Cfg would have: Gr
our p
Apr 04 14:59:36 [IKEv1]: failure of Phase 1: incompatibility of the types of attributes of class Group Description: RRs would be: unknown Cfg would have: Gr
our p
Apr 04 14:59:36 [IKEv1 DEBUG]: IP = 195.229.90.21, Oakley proposal is acceptable
Apr 04 14:59:36 [IKEv1 DEBUG]: IP = 195.229.90.21, payload processing VID
Apr 04 14:59:36 [IKEv1 DEBUG]: IP = 195.229.90.21, payload processing VID
Apr 04 14:59:36 [IKEv1 DEBUG]: IP = 195.229.90.21, received NAT - Traversal RFC VID
Apr 04 14:59:36 [IKEv1 DEBUG]: IP = 195.229.90.21, payload processing VID
Apr 04 14:59:36 [IKEv1 DEBUG]: IP = 195.229.90.21, received NAT-Traversal worm 02 VID
Apr 04 14:59:36 [IKEv1 DEBUG]: IP = 195.229.90.21, payload processing VID
Apr 04 14:59:36 [IKEv1 DEBUG]: IP = 195.229.90.21, received Fragmentation VID
Apr 04 14:59:36 [IKEv1 DEBUG]: IP = 195.229.90.21, payload processing VID
Apr 04 14:59:36 [IKEv1 DEBUG]: IP = 195.229.90.21, payload processing VID
Apr 04 14:59:36 [IKEv1 DEBUG]: IP = 195.229.90.21, payload processing VID
Apr 04 14:59:36 [IKEv1 DEBUG]: IP = 195.229.90.21, IKE SA payload processing
Apr 04 14:59:36 [IKEv1]: failure of Phase 1: incompatibility of the types of attributes of class Group Description: RRs would be: unknown Cfg would have: Gr
our p
Apr 04 14:59:36 [IKEv1]: failure of Phase 1: incompatibility of the types of attributes of class Group Description: RRs would be: unknown Cfg would have: Gr
OUP 2
Apr 04 14:59:36 [IKEv1 DEBUG]: IP = 195.229.90.21, IKE SA proposal # 1, transform # 5 acceptable entry Matches overall IKE #.
1
Apr 04 14:59:36 [IKEv1 DEBUG]: IP = 195.229.90.21, build the payloads of ISAKMP security
Apr 04 14:59:36 [IKEv1 DEBUG]: IP = 195.229.90.21, constructing the payload of NAT-Traversal VID worm RFC
Apr 04 14:59:36 [IKEv1 DEBUG]: IP = 195.229.90.21, construction of Fragmentation VID + load useful functionality
Apr 04 14:59:36 [IKEv1]: IP = 195.229.90.21, IKE_DECODE SEND Message (msgid = 0) with payloads: HDR + HER (1), SELLER (13)
NONE (0) + SELLER (13) overall length: 124
Apr 04 14:59:36 [IKEv1]: IP = 195.229.90.21, IKE_DECODE RECEIPT Message (msgid = 0) with payloads: HDR + KE (4), NUNCIO (10)
NAT - D (20) + NAT - D (20), NONE (0) overall length: 260
Apr 04 14:59:36 [IKEv1 DEBUG]: IP = 195.229.90.21, processing ke payload
Apr 04 14:59:36 [IKEv1 DEBUG]: IP = 195.229.90.21, payload processing ISA_KE
Apr 04 14:59:36 [IKEv1 DEBUG]: IP = 195.229.90.21, nonce payload processing
Apr 04 14:59:36 [IKEv1 DEBUG]: IP = 195.229.90.21, payload NAT-discovery of treatment
Apr 04 14:59:36 [IKEv1 DEBUG]: IP = 195.229.90.21, calculation of hash discovered NAT
Apr 04 14:59:36 [IKEv1 DEBUG]: IP = 195.229.90.21, payload NAT-discovery of treatment
Apr 04 14:59:36 [IKEv1 DEBUG]: IP = 195.229.90.21, calculation of hash discovered NAT
Apr 04 14:59:36 [IKEv1 DEBUG]: IP = 195.229.90.21, building ke payload
Apr 04 14:59:36 [IKEv1 DEBUG]: IP = 195.229.90.21, building nonce payload
Apr 04 14:59:36 [IKEv1 DEBUG]: IP = 195.229.90.21, build payloads of Cisco Unity VID
Apr 04 14:59:36 [IKEv1 DEBUG]: IP = 195.229.90.21, constructing payload V6 VID xauth
Apr 04 14:59:36 [IKEv1 DEBUG]: IP = 195.229.90.21, Send IOS VID
Apr 04 14:59:36 [IKEv1 DEBUG]: IP = 195.229.90.21, ASA usurpation IOS Vendor ID payload construction (version: 1.0.0 capabilit)
IES: 20000001)
Apr 04 14:59:36 [IKEv1 DEBUG]: IP = 195.229.90.21, build payloads VID
Apr 04 14:59:36 [IKEv1 DEBUG]: IP = 195.229.90.21, Send Altiga/Cisco VPN3000/Cisco ASA GW VID
Apr 04 14:59:36 [IKEv1 DEBUG]: IP = 195.229.90.21, NAT-discovery payload construction
Apr 04 14:59:36 [IKEv1 DEBUG]: IP = 195.229.90.21, calculation of hash discovered NAT
Apr 04 14:59:36 [IKEv1 DEBUG]: IP = 195.229.90.21, NAT-discovery payload construction
Apr 04 14:59:36 [IKEv1 DEBUG]: IP = 195.229.90.21, calculation of hash discovered NAT
Apr 04 14:59:36 [IKEv1]: IP = 195.229.90.21, connection landed on tunnel_group DefaultRAGroup
Apr 04 14:59:36 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, Generating keys for answering machine...
Apr 04 14:59:36 [IKEv1]: IP = 195.229.90.21, IKE_DECODE SEND Message (msgid = 0) with payloads: HDR + KE (4), NUNCIO (10) +.
SELLER of the SELLER the SELLER (13) (13) (13) of the SELLER (13) + NAT - D (20) + NAT - D (20) ++ (0) NONE total length: 304
Apr 04 14:59:36 [IKEv1]: IP = 195.229.90.21, IKE_DECODE RECEIPT Message (msgid = 0) with payloads: HDR + ID (5) + HASH (8) +.
NONE (0) overall length: 64
Apr 04 14:59:36 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, payload processing ID
Apr 04 14:59:36 [IKEv1 DECODER]: Group = DefaultRAGroup, IP = 195.229.90.21, ID_IPV4_ADDR received ID
10.1.100.79
Apr 04 14:59:36 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, processing hash payload
Apr 04 14:59:36 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, calculation of hash for ISAKMP
Apr 04 14:59:36 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, status of automatic NAT detection: remote endpoint IS be
Hind a NAT device this end is behind a NAT device
Apr 04 14:59:36 [IKEv1]: IP = 195.229.90.21, connection landed on tunnel_group DefaultRAGroup
Apr 04 14:59:36 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, construction of payload ID
Apr 04 14:59:36 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, build payloads of hash
Apr 04 14:59:36 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, calculation of hash for ISAKMP
Apr 04 14:59:36 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, building dpd vid payload
Apr 04 14:59:36 [IKEv1]: IP = 195.229.90.21, IKE_DECODE SEND Message (msgid = 0) with payloads: HDR, ID (5) + HASH (8) + V
ENDOR (13) + (0) NONE total length: 84
Apr 04 14:59:36 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, PHASE 1 COMPLETED
Apr 04 14:59:36 [IKEv1]: IP = 195.229.90.21, for this connection Keep-alive type: None
Apr 04 14:59:36 [IKEv1]: IP = 195.229.90.21, Keep-alives configured on, but the peer does not support persistent (type = None)
Apr 04 14:59:36 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, timer to generate a new key to start P1: 21600 seconds.
Apr 04 14:59:36 [IKEv1 DECODER]: IP = 195.229.90.21, IKE Responder starting QM: id msg = 00000001
Apr 04 14:59:36 [IKEv1]: IP = 195.229.90.21, IKE_DECODE RECEIPT Message (msgid = 1) with payloads: HDR + HASH (8) + HER (1) +.
ID (5) + ID (5) + NAT - OA (21) + NAT - OA (21), NUNCIO (10) + (0) NONE total length: 324
Apr 04 14:59:36 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, processing hash payload
Apr 04 14:59:36 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, SA payload processing
Apr 04 14:59:36 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, nonce payload processing
Apr 04 14:59:36 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, payload processing ID
Apr 04 14:59:36 [IKEv1 DECODER]: Group = DefaultRAGroup, IP = 195.229.90.21, ID_IPV4_ADDR received ID
10.1.100.79
Apr 04 14:59:36 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, data received in payload ID remote Proxy Host: address
10.1.100.79, Protocol 17 Port 1701
Apr 04 14:59:36 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, payload processing ID
Apr 04 14:59:36 [IKEv1 DECODER]: Group = DefaultRAGroup, IP = 195.229.90.21, ID_IPV4_ADDR received ID
185.78.161.254
Apr 04 14:59:36 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, data received in payload ID local Proxy Host: address 1
85.78.161.254, Protocol 17 Port 1701
Apr 04 14:59:36 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, detected L2TP/IPSec session.
Apr 04 14:59:36 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, payload NAT Original address of treatment
Apr 04 14:59:36 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, payload NAT Original address of treatment
Apr 04 14:59:36 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, QM IsRekeyed its not found old addr
Apr 04 14:59:36 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, static check card Crypto, card dyno, seq = 10 is a success
FUL game
Apr 04 14:59:36 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, Selecting one-encapsulated-Tunnel UDP and UDP - en
pre-measured-Transport modes defined by NAT-Traversal
Apr 04 14:59:36 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, remote peer IKE configured crypto card: dyno
Apr 04 14:59:36 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, ITS processing IPSec payload
Apr 04 14:59:36 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, IPSec SA proposal # 2, transform # 1 acceptable M
global security association entry IPSec matches # 10
Apr 04 14:59:36 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, IKE: asking SPI!
Apr 04 14:59:36 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, IKE got SPI engine key: SPI = 0x321170a2
Apr 04 14:59:36 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, quick mode of oakley constucting
Apr 04 14:59:36 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, empty building hash payload
Apr 04 14:59:36 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, building the IPSec Security Association Management
Apr 04 14:59:36 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, construction of support useful Nuncio IPSec
Apr 04 14:59:36 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, constructing the ID of the proxy
Apr 04 14:59:36 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, transmission Proxy Id:
Remote host: 195.229.90.21 Protocol Port 17 0
Local host: 10.10.20.2 Protocol 17 Port 1701
Apr 04 14:59:36 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, construction of payload NAT Original address
Apr 04 14:59:36 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, construction of payload NAT Original address
Apr 04 14:59:36 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, payload NAT Original address sending NAT-Traversal
Apr 04 14:59:36 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, build payloads of hash qm
Apr 04 14:59:36 [IKEv1 DECODER]: Group = DefaultRAGroup, IP = 195.229.90.21, IKE Responder sending 2nd QM pkt: id msg = 000000
01
Apr 04 14:59:36 [IKEv1]: IP = 195.229.90.21, IKE_DECODE SEND Message (msgid = 1) with payloads: HDR, HASH (8), HIS (1) + N
A TIMES (10) + ID (5) + ID (5) + NAT - OA (21) + NAT - OA (21) + (0) NONE total length: 184
Apr 04 14:59:36 [IKEv1]: IP = 195.229.90.21, IKE_DECODE RECEIPT Message (msgid = 1) with payloads: HDR + HASH (8) + NO (0)
total length: 52
Apr 04 14:59:36 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, processing hash payload
Apr 04 14:59:36 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, loading all IPSEC security associations
Apr 04 14:59:36 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, generate Quick Mode key!
Apr 04 14:59:36 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, NP encrypt rule looking for dyno carpet 10 crypto card
Ching unknown ACL: returned cs_id = ccf1ac00; rule = 00000000
Apr 04 14:59:36 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, generate Quick Mode key!
Apr 04 14:59:36 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, NP encrypt rule looking for dyno carpet 10 crypto card
Ching unknown ACL: returned cs_id = ccf1ac00; rule = 00000000
Apr 04 14:59:36 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, security full negotiation for user (Responder), in
related SPI, 0x321170a2, SPI = out = 0x8349be0f
Apr 04 14:59:36 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, IKE got a msg KEY_ADD for SA: SPI = 0x8349be0f
Apr 04 14:59:36 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, pitcher: received KEY_UPDATE, spi 0x321170a2
Apr 04 14:59:36 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, timer to generate a new key to start P2: 3060 seconds.
Apr 04 14:59:36 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, PHASE 2 COMPLETED (msgid = 00000001)
Apr 04 14:59:36 [IKEv1]: rules of classification IKEQM_Active() Add L2TP: ip <195.229.90.21>mask <0xFFFFFFFF>port<4500>
Apr 04 14:59:38 [IKEv1 DECODER]: IP = 195.229.90.21, IKE Responder starting QM: id msg = 00000002
Apr 04 14:59:38 [IKEv1]: IP = 195.229.90.21, IKE_DECODE RECEIPT Message (msgid = 2) with payloads: HDR + HASH (8) + HER (1) +.
ID (5) + ID (5) + NAT - OA (21) + NAT - OA (21), NUNCIO (10) + (0) NONE total length: 324
Apr 04 14:59:38 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, processing hash payload
Apr 04 14:59:38 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, SA payload processing
Apr 04 14:59:38 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, nonce payload processing
Apr 04 14:59:38 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, payload processing ID
Apr 04 14:59:38 [IKEv1 DECODER]: Group = DefaultRAGroup, IP = 195.229.90.21, ID_IPV4_ADDR received ID
10.1.100.79
Apr 04 14:59:38 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, data received in payload ID remote Proxy Host: address
195.229.90.21, Protocol 17, Port 0
Apr 04 14:59:38 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, payload processing ID
Apr 04 14:59:38 [IKEv1 DECODER]: Group = DefaultRAGroup, IP = 195.229.90.21, ID_IPV4_ADDR received ID
185.78.161.254
Apr 04 14:59:38 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, data received in payload ID local Proxy Host: address 1
0.10.20.2, Protocol 17 Port 1701
Apr 04 14:59:38 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, detected L2TP/IPSec session.
Apr 04 14:59:38 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, payload NAT Original address of treatment
Apr 04 14:59:38 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, payload NAT Original address of treatment
Apr 04 14:59:38 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, static check card Crypto, card dyno, seq = 10 is a success
FUL game
Apr 04 14:59:38 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, Selecting one-encapsulated-Tunnel UDP and UDP - en
pre-measured-Transport modes defined by NAT-Traversal
Apr 04 14:59:38 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, remote peer IKE configured crypto card: dyno
Apr 04 14:59:38 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, ITS processing IPSec payload
Apr 04 14:59:38 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, IPSec SA proposal # 2, transform # 1 acceptable M4500>0xFFFFFFFF>195.229.90.21>
global security association entry IPSec matches # 10
Apr 04 14:59:38 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, IKE: asking SPI!
Apr 04 14:59:38 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, the delete unit Active process event generate a new key for outdoors
peer 195.229.90.21.Apr 04 14:59:38 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, IKE got SPI engine key: SPI = 0xc9c523ea
Apr 04 14:59:38 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, quick mode of oakley constucting
Apr 04 14:59:38 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, empty building hash payload
Apr 04 14:59:38 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, building the IPSec Security Association Management
Apr 04 14:59:38 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, construction of support useful Nuncio IPSec
Apr 04 14:59:38 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, constructing the ID of the proxy
Apr 04 14:59:38 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, transmission Proxy Id:
Remote host: 195.229.90.21 Protocol Port 17 0
Local host: 10.10.20.2 Protocol 17 Port 1701
Apr 04 14:59:38 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, construction of payload NAT Original address
Apr 04 14:59:38 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, construction of payload NAT Original address
Apr 04 14:59:38 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, payload NAT Original address sending NAT-Traversal
Apr 04 14:59:38 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, build payloads of hash qm
Apr 04 14:59:38 [IKEv1 DECODER]: Group = DefaultRAGroup, IP = 195.229.90.21, IKE Responder sending 2nd QM pkt: id msg = 000000
02
Apr 04 14:59:38 [IKEv1]: IP = 195.229.90.21, IKE_DECODE SEND Message (msgid = 2) with payloads: HDR, HASH (8), SA (1) + N
A TIMES (10) + ID (5) + ID (5) + NAT - OA (21) + NAT - OA (21) + (0) NONE total length: 184
Apr 04 14:59:38 [IKEv1]: IP = 195.229.90.21, IKE_DECODE RECEIPT Message (msgid = 2) with payloads: HDR + HASH (8) + NO (0)
total length: 52
Apr 04 14:59:38 [IKEv1]: IP = 195.229.90.21, IKE_DECODE RECEIPT Message (msgid = b0e14739) with payloads: HDR + HASH (8), OF
LETE (12) + (0) NONE total length: 68
Apr 04 14:59:38 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, processing hash payload
Apr 04 14:59:38 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, removal of treatment
Apr 04 14:59:38 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, IKE Received delete to resultants to reappear homologous IKE: 195,22
9.90.21, reappear addr: cd4874a0, msgid: 0x00000001
Apr 04 14:59:38 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, L2TP/IPSec: ignoring delete for a sentry (rekeyed m
SGID = 1)
Apr 04 14:59:38 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, processing hash payload
Apr 04 14:59:38 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, loading all IPSEC security associations
Apr 04 14:59:38 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, generate Quick Mode key!
Apr 04 14:59:38 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, NP encrypt rule looking for dyno carpet 10 crypto card
Ching unknown ACL: returned cs_id = ccf1ac00; rule = 00000000
Apr 04 14:59:38 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, generate Quick Mode key!
Apr 04 14:59:38 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, NP encrypt rule looking for dyno carpet 10 crypto card
Ching unknown ACL: returned cs_id = ccf1ac00; rule = 00000000
Apr 04 14:59:38 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, security full negotiation for user (Responder), in
related SPI, 0xc9c523ea, SPI = out = 0x619b7d3a
Apr 04 14:59:38 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, IKE got a msg KEY_ADD for SA: SPI = 0x619b7d3a
Apr 04 14:59:38 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, pitcher: received KEY_UPDATE, spi 0xc9c523ea
Apr 04 14:59:38 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, timer to generate a new key to start P2: 3060 seconds.
Apr 04 14:59:38 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, PHASE 2 COMPLETED (msgid = 00000002)
Apr 04 14:59:39 [IKEv1 DECODER]: IP = 195.229.90.21, IKE Responder starting QM: id msg = 00000003
Apr 04 14:59:39 [IKEv1]: IP = 195.229.90.21, IKE_DECODE RECEIPT Message (msgid = 3) with payloads: HDR + HASH (8) + HER (1) +.
ID (5) + ID (5) + NAT - OA (21) + NAT - OA (21), NUNCIO (10) + (0) NONE total length: 324
Apr 04 14:59:39 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, processing hash payload
Apr 04 14:59:39 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, SA payload processing
Apr 04 14:59:39 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, nonce payload processing
Apr 04 14:59:39 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, payload processing ID
Apr 04 14:59:39 [IKEv1 DECODER]: Group = DefaultRAGroup, IP = 195.229.90.21, ID_IPV4_ADDR received ID
10.1.100.79
Apr 04 14:59:39 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, data received in payload ID remote Proxy Host: address
195.229.90.21, Protocol 17, Port 0
Apr 04 14:59:39 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, payload processing ID
Apr 04 14:59:39 [IKEv1 DECODER]: Group = DefaultRAGroup, IP = 195.229.90.21, ID_IPV4_ADDR received ID
185.78.161.254
Apr 04 14:59:39 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, data received in payload ID local Proxy Host: address 1
0.10.20.2, Protocol 17 Port 1701
Apr 04 14:59:39 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, detected L2TP/IPSec session.
Apr 04 14:59:39 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, payload NAT Original address of treatment
Apr 04 14:59:39 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, payload NAT Original address of treatment
Apr 04 14:59:39 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, QM IsRekeyed its already be regenerated
Apr 04 14:59:39 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, error QM WSF (P2 struct & 0xcd51dbb8, mess id 0x3)!
Apr 04 14:59:39 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, case of mistaken IKE responder QM WSF (struct & 0xcd51
DBB8), : QM_DONE, EV_ERROR--> QM_BLD_MSG2, EV_IS_REKEY--> QM_BLD_MSG2, EV_CONFIRM_SA--> QM_BLD_MSG2, EV_PROC_MS
G--> QM_BLD_MSG2, EV_HASH_OK--> QM_BLD_MSG2, NullEvent--> QM_BLD_MSG2, EV_COMP_HASH--> QM_BLD_MSG2, EV_VALIDATE_MSG
Apr 04 14:59:39 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, sending clear/delete with the message of reason
Apr 04 14:59:39 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, peer table correlator Removing failed, no match!
Apr 04 14:59:41 [IKEv1 DECODER]: IP = 195.229.90.21, IKE Responder starting QM: id msg = 00000003
Apr 04 14:59:41 [IKEv1]: IP = 195.229.90.21, IKE_DECODE RECEIPT Message (msgid = 3) with payloads: HDR + HASH (8) + HER (1) +.
ID (5) + ID (5) + NAT - OA (21) + NAT - OA (21), NUNCIO (10) + (0) NONE total length: 324
Apr 04 14:59:41 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, processing hash payload
Apr 04 14:59:41 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, SA payload processing
Apr 04 14:59:41 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, nonce payload processing
Apr 04 14:59:41 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, payload processing ID
Apr 04 14:59:41 [IKEv1 DECODER]: Group = DefaultRAGroup, IP = 195.229.90.21, ID_IPV4_ADDR received ID
10.1.100.79
Apr 04 14:59:41 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, data received in payload ID remote Proxy Host: address
195.229.90.21, Protocol 17, Port 0
Apr 04 14:59:41 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, payload processing ID
Apr 04 14:59:41 [IKEv1 DECODER]: Group = DefaultRAGroup, IP = 195.229.90.21, ID_IPV4_ADDR received ID
185.78.161.254
Apr 04 14:59:41 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, data received in payload ID local Proxy Host: address 1
0.10.20.2, Protocol 17 Port 1701
Apr 04 14:59:41 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, detected L2TP/IPSec session.
Apr 04 14:59:41 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, payload NAT Original address of treatment
Apr 04 14:59:41 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, payload NAT Original address of treatment
Apr 04 14:59:41 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, QM IsRekeyed its already be regenerated
Apr 04 14:59:41 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, error QM WSF (P2 struct & 0xcd5159c8, mess id 0x3)!
Apr 04 14:59:41 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, case of mistaken IKE responder QM WSF (struct & 0xcd51
59 c 8), : QM_DONE, EV_ERROR--> QM_BLD_MSG2, EV_IS_REKEY--> QM_BLD_MSG2, EV_CONFIRM_SA--> QM_BLD_MSG2, EV_PROC_MS
G--> QM_BLD_MSG2, EV_HASH_OK--> QM_BLD_MSG2, NullEvent--> QM_BLD_MSG2, EV_COMP_HASH--> QM_BLD_MSG2, EV_VALIDATE_MSG
Apr 04 14:59:41 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, sending clear/delete with the message of reason
Apr 04 14:59:41 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, peer table correlator Removing failed, no match!
Apr 04 14:59:44 [IKEv1 DECODER]: IP = 195.229.90.21, IKE Responder starting QM: id msg = 00000003
Apr 04 14:59:44 [IKEv1]: IP = 195.229.90.21, IKE_DECODE RECEIPT Message (msgid = 3) with payloads: HDR + HASH (8) + HER (1) +.
ID (5) + ID (5) + NAT - OA (21) + NAT - OA (21), NUNCIO (10) + (0) NONE total length: 324
Apr 04 14:59:44 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, processing hash payload
Apr 04 14:59:44 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, SA payload processing
Apr 04 14:59:44 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, nonce payload processing
Apr 04 14:59:44 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, payload processing ID
Apr 04 14:59:44 [IKEv1 DECODER]: Group = DefaultRAGroup, IP = 195.229.90.21, ID_IPV4_ADDR received ID
10.1.100.79
Apr 04 14:59:44 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, data received in payload ID remote Proxy Host: address
195.229.90.21, Protocol 17, Port 0
Apr 04 14:59:44 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, payload processing ID
Apr 04 14:59:44 [IKEv1 DECODER]: Group = DefaultRAGroup, IP = 195.229.90.21, ID_IPV4_ADDR received ID
185.78.161.254
Apr 04 14:59:44 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, data received in payload ID local Proxy Host: address 1
0.10.20.2, Protocol 17 Port 1701
Apr 04 14:59:44 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, detected L2TP/IPSec session.
Apr 04 14:59:44 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, payload NAT Original address of treatment
Apr 04 14:59:44 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, payload NAT Original address of treatment
Apr 04 14:59:44 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, QM IsRekeyed its already be regenerated
Apr 04 14:59:44 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, error QM WSF (P2 struct & 0xcd5159c8, mess id 0x3)!
Apr 04 14:59:44 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, case of mistaken IKE responder QM WSF (struct & 0xcd51
59 c 8), : QM_DONE, EV_ERROR--> QM_BLD_MSG2, EV_IS_REKEY--> QM_BLD_MSG2, EV_CONFIRM_SA--> QM_BLD_MSG2, EV_PROC_MS
G--> QM_BLD_MSG2, EV_HASH_OK--> QM_BLD_MSG2, NullEvent--> QM_BLD_MSG2, EV_COMP_HASH--> QM_BLD_MSG2, EV_VALIDATE_MSG
Apr 04 14:59:44 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, sending clear/delete with the message of reason
Apr 04 14:59:44 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, peer table correlator Removing failed, no match!
Apr 04 14:59:48 [IKEv1 DECODER]: IP = 195.229.90.21, IKE Responder starting QM: id msg = 00000003
Apr 04 14:59:48 [IKEv1]: IP = 195.229.90.21, IKE_DECODE RECEIPT Message (msgid = 3) with payloads: HDR + HASH (8) + HER (1) +.
ID (5) + ID (5) + NAT - OA (21) + NAT - OA (21), NUNCIO (10) + (0) NONE total length: 324
Apr 04 14:59:48 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, processing hash payload
Apr 04 14:59:48 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, SA payload processing
Apr 04 14:59:48 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, nonce payload processing
Apr 04 14:59:48 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, payload processing ID
Apr 04 14:59:48 [IKEv1 DECODER]: Group = DefaultRAGroup, IP = 195.229.90.21, ID_IPV4_ADDR received ID
10.1.100.79
Apr 04 14:59:48 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, data received in payload ID remote Proxy Host: address
195.229.90.21, Protocol 17, Port 0
Apr 04 14:59:48 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, payload processing ID
Apr 04 14:59:48 [IKEv1 DECODER]: Group = DefaultRAGroup, IP = 195.229.90.21, ID_IPV4_ADDR received ID
185.78.161.254
Apr 04 14:59:48 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, data received in payload ID local Proxy Host: address 1
0.10.20.2, Protocol 17 Port 1701
Apr 04 14:59:48 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, detected L2TP/IPSec session.
Apr 04 14:59:48 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, payload NAT Original address of treatment
Apr 04 14:59:48 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, payload NAT Original address of treatment
Apr 04 14:59:48 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, QM IsRekeyed its already be regenerated
Apr 04 14:59:48 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, error QM WSF (P2 struct & 0xcd5159c8, mess id 0x3)!
Apr 04 14:59:48 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, case of mistaken IKE responder QM WSF (struct & 0xcd51
59 c 8), : QM_DONE, EV_ERROR--> QM_BLD_MSG2, EV_IS_REKEY--> QM_BLD_MSG2, EV_CONFIRM_SA--> QM_BLD_MSG2, EV_PROC_MS
G--> QM_BLD_MSG2, EV_HASH_OK--> QM_BLD_MSG2, NullEvent--> QM_BLD_MSG2, EV_COMP_HASH--> QM_BLD_MSG2, EV_VALIDATE_MSG
Apr 04 14:59:48 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, sending clear/delete with the message of reason
Apr 04 14:59:48 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, peer table correlator Removing failed, no match!
Apr 04 14:59:57 [IKEv1 DECODER]: IP = 195.229.90.21, IKE Responder starting QM: id msg = 00000003
Apr 04 14:59:57 [IKEv1]: IP = 195.229.90.21, IKE_DECODE RECEIPT Message (msgid = 3) with payloads: HDR + HASH (8) + HER (1) +.
ID (5) + ID (5) + NAT - OA (21) + NAT - OA (21), NUNCIO (10) + (0) NONE total length: 324
Apr 04 14:59:57 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, processing hash payload
Apr 04 14:59:57 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, SA payload processing
Apr 04 14:59:57 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, nonce payload processing
Apr 04 14:59:57 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, payload processing ID
Apr 04 14:59:57 [IKEv1 DECODER]: Group = DefaultRAGroup, IP = 195.229.90.21, ID_IPV4_ADDR received ID
10.1.100.79
Apr 04 14:59:57 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, data received in payload ID remote Proxy Host: address
195.229.90.21, Protocol 17, Port 0
Apr 04 14:59:57 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, payload processing ID
Apr 04 14:59:57 [IKEv1 DECODER]: Group = DefaultRAGroup, IP = 195.229.90.21, ID_IPV4_ADDR received ID
185.78.161.254
Apr 04 14:59:57 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, data received in payload ID local Proxy Host: address 1
0.10.20.2, Protocol 17 Port 1701
Apr 04 14:59:57 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, detected L2TP/IPSec session.
Apr 04 14:59:57 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, payload NAT Original address of treatment
Apr 04 14:59:57 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, payload NAT Original address of treatment
Apr 04 14:59:57 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, QM IsRekeyed its already be regenerated
Apr 04 14:59:57 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, error QM WSF (P2 struct & 0xcd515f40, mess id 0x3)!
Apr 04 14:59:57 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, case of mistaken IKE responder QM WSF (struct & 0xcd51
5f40), : QM_DONE, EV_ERROR--> QM_BLD_MSG2, EV_IS_REKEY--> QM_BLD_MSG2, EV_CONFIRM_SA--> QM_BLD_MSG2, EV_PROC_MS
G--> QM_BLD_MSG2, EV_HASH_OK--> QM_BLD_MSG2, NullEvent--> QM_BLD_MSG2, EV_COMP_HASH--> QM_BLD_MSG2, EV_VALIDATE_MSG
Apr 04 14:59:57 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, sending clear/delete with the message of reason
Apr 04 14:59:57 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, peer table correlator Removing failed, no match!
04 Apr 15:00:08 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, sending clear/delete with the message of reason
04 Apr 15:00:08 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, empty building hash payload
04 Apr 15:00:08 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, building IPSec delete payload
04 Apr 15:00:08 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, build payloads of hash qm
04 Apr 15:00:08 [IKEv1]: IP = 195.229.90.21, IKE_DECODE SEND Message (msgid = 64ea9549) with payloads: HDR + HASH (8) + delete
SUMMER (12) + (0) NONE total length: 68
04 Apr 15:00:08 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, Active unit receives an event would have expired for re
Mote 195.229.90.21 counterpart.04 Apr 15:00:08 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, IKE, removing SA: Remote Proxy 195.229.90.21, Local
Proxy 10.10.20.2
04 Apr 15:00:08 [IKEv1 DEBUG]: pitcher: received the keys delete msg, spi 0x321170a2
04 Apr 15:00:11 [IKEv1]: IP = 195.229.90.21, IKE_DECODE RECEIPT Message (msgid = d28ee0e6) with payloads: HDR + HASH (8), OF
LETE (12) + (0) NONE total length: 68
04 Apr 15:00:11 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, processing hash payload
04 Apr 15:00:11 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, removal of treatment
04 Apr 15:00:11 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, completed for peer Connection. Reason: Put an end to Peer
Remote proxy 195.229.90.21 Proxy Local 10.10.20.2
04 Apr 15:00:11 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, Active unit receives a delete for remote wet event
r 195.229.90.21.04 Apr 15:00:11 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, IKE, removing SA: Remote Proxy 195.229.90.21, Local
Proxy 10.10.20.2
04 Apr 15:00:11 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, IKE SA MM:a32eab27 RRs would end: MM_ACTIV of State
E flags 0 x 00000042, refcnt 1, tuncnt 0
04 Apr 15:00:11 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, IKE SA MM:a32eab27 ending: flags 0 x 01000002,
refcnt 0, tuncnt 0
04 Apr 15:00:11 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, sending clear/delete with the message of reason
04 Apr 15:00:11 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, empty building hash payload
04 Apr 15:00:11 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, constructing the payload to delete IKE
04 Apr 15:00:11 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, build payloads of hash qm
04 Apr 15:00:11 [IKEv1]: IP = 195.229.90.21, IKE_DECODE SEND Message (msgid = e5c290b6) with payloads: HDR + HASH (8) + delete
SUMMER (12) + (0) NONE total length: 80
04 Apr 15:00:11 [IKEv1 DEBUG]: pitcher: received the keys delete msg, spi 0xc9c523ea
04 Apr 15:00:11 [IKEv1 DEBUG]: pitcher: received the keys delete msg, spi 0xc9c523ea
04 Apr 15:00:11 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, Session is be demolished. Reason: The user has requested
04 Apr 15:00:11 [IKEv1]: ignoring msg SA brand with Iddm 36864 dead because ITS removal
04 Apr 15:00:11 [IKEv1]: IP = 195.229.90.21, encrypted packet received with any HIS correspondent, dropEQ-INTFW01 # IPSEC: deleted leaving encrypt rule, SPI 0x243066CC
Rule ID: 0xCD487C20
IPSEC: Remove permitted outbound rule, SPI 0x243066CC
Rule ID: 0xCD51D3E8
IPSEC: Circumscribed outgoing VPN, SPI 0x243066CC context
Handle VPN: 0x00033D94
IPSEC: Deleted the inbound rule decrypt, SPI 0x44001D8E
Rule ID: 0xCD51DC68
IPSEC: Deleted the allowed inbound rule, SPI 0x44001D8E
Rule ID: 0xCD51DE08
IPSEC: Remove workflow rule entrants tunnel, SPI 0x44001D8E
Rule ID: 0xCD51CCF8
IPSEC: Circumscribed incoming VPN, SPI 0x44001D8E context
VPN handle: 0 x 00035734
IPSEC: Deleted leaving encrypt rule, SPI 0x9EF2CA7A
Rule ID: 0xCD3CD1E8
IPSEC: Remove permitted outbound rule, SPI 0x9EF2CA7A
Rule ID: 0xCD51AE20
IPSEC: Removed outbound VPN, SPI 0x9EF2CA7A context
Handle VPN: 0x00033D94
IPSEC: Deleted the inbound rule decrypt, SPI 0x866D812A
Rule ID: 0xCD487FD0
IPSEC: Deleted the allowed inbound rule, SPI 0x866D812A
Rule ID: 0xCCB3D7D0
IPSEC: Remove workflow rule entrants tunnel, SPI 0x866D812A
Rule ID: 0xCD48B110
IPSEC: Deleted incoming VPN, SPI 0x866D812A context
VPN handle: 0 x 00035734
IPSEC: HIS embryonic new created @ 0xCCB9C1F8.
RCS: 0XCD489170,
Direction: inbound
SPI: 0XADBC899B
Session ID: 0x0000E000
VPIF num: 0x00000001
Tunnel type: ra
Protocol: esp
Life expectancy: 240 seconds
IPSEC: HIS embryonic new created @ 0xCD17B2B8.
RCS: 0XCD4896C8,
Direction: outgoing
SPI: 0XD69313B6
Session ID: 0x0000E000
VPIF num: 0x00000001
Tunnel type: ra
Protocol: esp
Life expectancy: 240 seconds
IPSEC: Completed the update of NDONGO host, SPI 0xD69313B6
IPSEC: Creating outgoing VPN context, SPI 0xD69313B6
Flags: 0 x 00000225
SA: 0XCD17B2B8
SPI: 0XD69313B6
MTU: 1500 bytes
VCID: 0X00000000
Peer: 0x00000000
CBS: 0X010926E1
Channel: 0xC929B4C0
IPSEC: Finished outgoing VPN, SPI 0xD69313B6 context
Handle VPN: 0x00037A0C
IPSEC: New outbound encrypt rule, SPI 0xD69313B6
ADR SRC: 10.10.20.2
SRC mask: 255.255.255.255
ADR DST: 195.229.90.21
DST mask: 255.255.255.255
Ports of CBC
Superior: 1701
Bass: 1701
OP: equality
Ports of DST
Superior: 4500
Bass: 4500
OP: equality
Protocol: 17
Use the Protocol: true
SPI: 0X00000000
Use the SPI: false
IPSEC: Finished out encrypt rule, SPI 0xD69313B6
Rule ID: 0xCD489970
IPSEC: New rule to permit outgoing, SPI 0xD69313B6
ADR SRC: 10.10.20.2
SRC mask: 255.255.255.255
ADR DST: 195.229.90.21
DST mask: 255.255.255.255
Ports of CBC
Superior: 4500
Bass: 4500
OP: equality
Ports of DST
Superior: 4500
Bass: 4500
OP: equality
Protocol: 17
Use the Protocol: true
SPI: 0X00000000
Use the SPI: false
IPSEC: Finished allowed outbound rule, SPI 0xD69313B6
Rule ID: 0xCD4899F8
IPSEC: Completed the update of IBSA host, SPI 0xADBC899B
IPSEC: Create context incoming VPN, SPI 0xADBC899B
Flags: 0 x 00000226
SA: 0XCCB9C1F8
SPI: 0XADBC899B
MTU: 0 bytes
VCID: 0X00000000
Peer: 0x00037A0C
CBS: 0 X 01088849
Channel: 0xC929B4C0
IPSEC: Completed incoming VPN, SPI 0xADBC899B context
Handle VPN: 0x0003864C
IPSEC: updated outgoing VPN 0x00037A0C, SPI 0xD69313B6 context
Flags: 0 x 00000225
SA: 0XCD17B2B8
SPI: 0XD69313B6
MTU: 1500 bytes
VCID: 0X00000000
Peer: 0x0003864C
CBS: 0X010926E1
Channel: 0xC929B4C0
IPSEC: Finished outgoing VPN, SPI 0xD69313B6 context
Handle VPN: 0x00037A0C
IPSEC: Internal filled rule of outgoing traffic, SPI 0xD69313B6
Rule ID: 0xCD489970
IPSEC: External filled SPD rule of outgoing traffic, SPI 0xD69313B6
Rule ID: 0xCD4899F8
IPSEC: New entrants flow tunnel, SPI 0xADBC899B
ADR SRC: 195.229.90.21
SRC mask: 255.255.255.255
ADR DST: 10.10.20.2
DST mask: 255.255.255.255
Ports of CBC
High: 0
Low: 0
OP: ignore
Ports of DST
Superior: 1701
Bass: 1701
OP: equality
Protocol: 17
Use the Protocol: true
SPI: 0X00000000
Use the SPI: false
IPSEC: Incoming Tunnel filled with flow, SPI 0xADBC899B
Rule ID: 0xC92B0518
IPSEC: New rule to decrypt incoming, SPI 0xADBC899B
ADR SRC: 195.229.90.21
SRC mask: 255.255.255.255
ADR DST: 10.10.20.2
DST mask: 255.255.255.255
Ports of CBC
Superior: 4500
Bass: 4500
OP: equality
Ports of DST
Superior: 4500
Bass: 4500
OP: equality
Protocol: 17
Use the Protocol: true
SPI: 0X00000000
Use the SPI: false
IPSEC: Completed inbound rule decrypt, SPI 0xADBC899B
Rule ID: 0xCD3CD1A8
IPSEC: New rule incoming authorization, SPI 0xADBC899B
ADR SRC: 195.229.90.21
SRC mask: 255.255.255.255
ADR DST: 10.10.20.2
DST mask: 255.255.255.255
Ports of CBC
Superior: 4500
Bass: 4500
OP: equality
Ports of DST
Superior: 4500
Bass: 4500
OP: equality
Protocol: 17
Use the Protocol: true
SPI: 0X00000000
Use the SPI: false
IPSEC: Finished entering permitted rule, SPI 0xADBC899B
Rule ID: 0xCD03D6F0
IPSEC: HIS embryonic new created @ 0xCD51AC70.
RCS: 0XCD51ABC0,
Direction: inbound
SPI: 0X89796CE7
Session ID: 0x0000E000
VPIF num: 0x00000001
Tunnel type: ra
Protocol: esp
Life expectancy: 240 seconds
IPSEC: HIS embryonic new created @ 0xCD488538.
RCS: 0XCD488D48,
Direction: outgoing
SPI: 0XEF66E002
Session ID: 0x0000E000
VPIF num: 0x00000001
Tunnel type: ra
Protocol: esp
Life expectancy: 240 seconds
IPSEC: Completed the update of NDONGO host, SPI 0xEF66E002
IPSEC: Finished outgoing VPN, SPI 0xEF66E002 context
Handle VPN: 0x00037A0C
IPSEC: New outbound encrypt rule, SPI 0xEF66E002
ADR SRC: 10.10.20.2
SRC mask: 255.255.255.255
ADR DST: 195.229.90.21
DST mask: 255.255.255.255
Ports of CBC
Superior: 1701
Bass: 1701
OP: equality
Ports of DST
Superior: 4500
Bass: 4500
OP: equality
Protocol: 17
Use the Protocol: true
SPI: 0X00000000
Use the SPI: false
IPSEC: Finished out encrypt rule, SPI 0xEF66E002
Rule ID: 0xCD488948
IPSEC: New rule to permit outgoing, SPI 0xEF66E002
ADR SRC: 10.10.20.2
SRC mask: 255.255.255.255
ADR DST: 195.229.90.21
DST mask: 255.255.255.255
Ports of CBC
Superior: 4500
Bass: 4500
OP: equality
Ports of DST
Superior: 4500
Bass: 4500
OP: equality
Protocol: 17
Use the Protocol: true
SPI: 0X00000000
Use the SPI: false
IPSEC: Finished allowed outbound rule, SPI 0xEF66E002
Rule ID: 0xCD51BEE0
IPSEC: Completed the update of IBSA host, SPI 0x89796CE7
IPSEC: Completed incoming VPN, SPI 0x89796CE7 context
Handle VPN: 0x0003864C
IPSEC: Finished outgoing VPN, SPI 0xEF66E002 context
Handle VPN: 0x00037A0C
IPSEC: Filled internal SPD rule of outgoing traffic, SPI 0xEF66E002
Rule ID: 0xCD488948
IPSEC: External filled SPD rule of outgoing traffic, SPI 0xEF66E002
Rule ID: 0xCD51BEE0
IPSEC: New entrants flow tunnel, SPI 0x89796CE7
ADR SRC: 195.229.90.21
SRC mask: 255.255.255.255
ADR DST: 10.10.20.2
DST mask: 255.255.255.255
Ports of CBC
High: 0
Low: 0
OP: ignore
Ports of DST
Superior: 1701
Bass: 1701
OP: equality
Protocol: 17
Use the Protocol: true
SPI: 0X00000000
Use the SPI: false
IPSEC: Incoming Tunnel filled with flow, SPI 0x89796CE7
Rule ID: 0xCD51C6F0
IPSEC: New rule to decrypt incoming, SPI 0x89796CE7
ADR SRC: 195.229.90.21
SRC mask: 255.255.255.255
ADR DST: 10.10.20.2
DST mask: 255.255.255.255
Ports of CBC
Superior: 4500
Bass: 4500
OP: equality
Ports of DST
Superior: 4500
Bass: 4500
OP: equality
Protocol: 17
Use the Protocol: true
SPI: 0X00000000
Use the SPI: false
IPSEC: Completed inbound rule decrypt, SPI 0x89796CE7
Rule ID: 0xCD487CC8
IPSEC: New rule incoming authorization, SPI 0x89796CE7
ADR SRC: 195.229.90.21
SRC mask: 255.255.255.255
ADR DST: 10.10.20.2
DST mask: 255.255.255.255
Ports of CBC
Superior: 4500
Bass: 4500
OP: equality
Ports of DST
Superior: 4500
Bass: 4500
OP: equality
Protocol: 17
Use the Protocol: true
SPI: 0X00000000
Use the SPI: false
IPSEC: Finished entering permitted rule, SPI 0x89796CE7
Rule ID: 0xCD487E68EQ-INTFW01 #.
--> QM_BLD_MSG2, EV_HASH_OK--> QM_BLD_MSG2, NullEvent--> QM_BLD_MSG2, EV_COMP_HASH--> QM_BLD_MSG2, EV_VALIDATE_MSG
Apr 04 14:59:48 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, sending clear/delete with the message of reason
Apr 04 14:59:48 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, peer table correlator Removing failed, no match!
Apr 04 14:59:57 [IKEv1 DECODER]: IP = 195.229.90.21, IKE Responder starting QM: id msg = 00000003
Apr 04 14:59:57 [IKEv1]: IP = 195.229.90.21, IKE_DECODE RECEIPT Message (msgid = 3) with payloads: HDR + HASH (8) + HER (1) +.
ID (5) + ID (5) + NAT - OA (21) + NAT - OA (21), NUNCIO (10) + (0) NONE total length: 324
Apr 04 14:59:57 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, processing hash payload
Apr 04 14:59:57 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, SA payload processing
Apr 04 14:59:57 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, nonce payload processing
Apr 04 14:59:57 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, payload processing ID
Apr 04 14:59:57 [IKEv1 DECODER]: Group = DefaultRAGroup, IP = 195.229.90.21, ID_IPV4_ADDR received ID
10.1.100.79
Apr 04 14:59:57 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, data received in payload ID remote Proxy Host: address
195.229.90.21, Protocol 17, Port 0
Apr 04 14:59:57 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, payload processing ID
Apr 04 14:59:57 [IKEv1 DECODER]: Group = DefaultRAGroup, IP = 195.229.90.21, ID_IPV4_ADDR received ID
185.78.161.254
Apr 04 14:59:57 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, data received in payload ID local Proxy Host: address 1
0.10.20.2, Protocol 17 Port 1701
Apr 04 14:59:57 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, detected L2TP/IPSec session.
Apr 04 14:59:57 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, payload NAT Original address of treatment
Apr 04 14:59:57 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, payload NAT Original address of treatment
Apr 04 14:59:57 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, QM IsRekeyed its already be regenerated
Apr 04 14:59:57 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, error QM WSF (P2 struct & 0xcd515f40, mess id 0x3)!
Apr 04 14:59:57 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, case of mistaken IKE responder QM WSF (struct & 0xcd51
5f40), : QM_DONE, EV_ERROR--> QM_BLD_MSG2, EV_IS_REKEY--> QM_BLD_MSG2, EV_CONFIRM_SA--> QM_BLD_MSG2, EV_PROC_MS
G--> QM_BLD_MSG2, EV_HASH_OK--> QM_BLD_MSG2, NullEvent--> QM_BLD_MSG2, EV_COMP_HASH--> QM_BLD_MSG2, EV_VALIDATE_MSG
Apr 04 14:59:57 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, sending clear/delete with the message of reason
Apr 04 14:59:57 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, peer table correlator Removing failed, no match!
04 Apr 15:00:08 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, sending clear/delete with the message of reason
04 Apr 15:00:08 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, empty building hash payload
04 Apr 15:00:08 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, building IPSec delete payload
04 Apr 15:00:08 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, build payloads of hash qm
04 Apr 15:00:08 [IKEv1]: IP = 195.229.90.21, IKE_DECODE SEND Message (msgid = 64ea9549) with payloads: HDR + HASH (8) + delete
SUMMER (12) + (0) NONE total length: 68
04 Apr 15:00:08 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, Active unit receives an event would have expired for re
Mote 195.229.90.21 counterpart.04 Apr 15:00:08 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, IKE, removing SA: Remote Proxy 195.229.90.21, Local
Proxy 10.10.20.2
04 Apr 15:00:08 [IKEv1 DEBUG]: pitcher: received the keys delete msg, spi 0x321170a2
04 Apr 15:00:11 [IKEv1]: IP = 195.229.90.21, IKE_DECODE RECEIPT Message (msgid = d28ee0e6) with payloads: HDR + HASH (8), OF
LETE (12) + (0) NONE total length: 68
04 Apr 15:00:11 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, processing hash payload
04 Apr 15:00:11 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, removal of treatment
04 Apr 15:00:11 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, completed for peer Connection. Reason: Put an end to Peer
Remote proxy 195.229.90.21 Proxy Local 10.10.20.2
04 Apr 15:00:11 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, Active unit receives a delete for remote wet event
r 195.229.90.21.04 Apr 15:00:11 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, IKE, removing SA: Remote Proxy 195.229.90.21, Local
Proxy 10.10.20.2
04 Apr 15:00:11 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, IKE SA MM:a32eab27 RRs would end: MM_ACTIV of State
E flags 0 x 00000042, refcnt 1, tuncnt 0
04 Apr 15:00:11 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, IKE SA MM:a32eab27 ending: flags 0 x 01000002,
refcnt 0, tuncnt 0
04 Apr 15:00:11 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, sending clear/delete with the message of reason
04 Apr 15:00:11 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, empty building hash payload
04 Apr 15:00:11 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, constructing the payload to delete IKE
04 Apr 15:00:11 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, build payloads of hash qm
04 Apr 15:00:11 [IKEv1]: IP = 195.229.90.21, IKE_DECODE SEND Message (msgid = e5c290b6) with payloads: HDR + HASH (8) + delete
SUMMER (12) + (0) NONE total length: 80
04 Apr 15:00:11 [IKEv1 DEBUG]: pitcher: received the keys delete msg, spi 0xc9c523ea
04 Apr 15:00:11 [IKEv1 DEBUG]: pitcher: received the keys delete msg, spi 0xc9c523ea
04 Apr 15:00:11 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, Session is be demolished. Reason: The user has requested
04 Apr 15:00:11 [IKEv1]: ignoring msg SA brand with Iddm 36864 dead because ITS removal
04 Apr 15:00:11 [IKEv1]: IP = 195.229.90.21, encrypted packet received with any HIS correspondent, drop!
I'm glad that the problem is solved!
Please mark the thread as answered in favour of other members of the community.Kind regards
Dinesh Moudgil -
Mac OS El Capitan cannot share a VPN connection that is type of IKEv2
I have a few VPN connections, I share via Wi - Fi on my mobile device. Here's what I do:
I have a Macbook Pro with Ethernet port, I have some work VPN connections (some type of IPSec, some IKEv2). First I plug the cable to the Ethernet port, then I start a VPN (settings-> network-> Connect) connection, finally, I share the VPN (settings-> sharing-> Internet sharing) via Wi - Fi connection so that my mobile device can connect and use the VPN connection.
This work really well for me with IPSec VPN connections. But today, I tried to switch to an IKEv2 VPN connection, the VPN works well, but I can't share it on a mobile device via Wi - Fi, because I couldn't see the connection in the list "share your connection from" (Preferences-> sharing-> Internet sharing system)
Are there any technical problem that IKEv2 cannot be shared? Or is there that all parameters must be made so that all VPN connections must appear in the list to share?
evpn https://support.purevpn.com/IKEv2-Configuration-Guide-for-OS-x-El-Capitan-by-pur
-
Cannot change network over the VPN connection components
Hi all
I set up a VPN in windows XP Service Pack 3 with all latest updates. When I display the properties of the VPN connection, there is a tab labeled "Networking". When I click on the tab networking that I get an error message pop up that says: "Unable to allow the editing of networkingcomponents at the moment because they are being modified elsewhere." I restarted and also tried to search and stop the services dealing with virtual private networks, etc. nothing works.
Can someone help me troubleshoot or identify what prevents me to change my network layout tab? There is virtually no information on the internet addressing it.
Thanks in advance!
Hi Amish_Robot,
The issue of Windows XP, you have posted is better suited for the IT Pro TechNet public. Please ask your question in the TechNet forums for assistance.
Hope the helps of information.
Concerning
Joel S
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
error on the remote desktop and VPN connections
Unable to connect using desktop remote or VPN. remotes can't find the computer at home on the network and the VPN gives me an 800 error code. I used the remote desktop, but it says my work computer isn't on this network and the VPN connection fails. We checked everything using remote assistance, but it becomes too hard and not responses. Help!!!!!!!!!!!!!!!!!!!
Hello
Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public.
Please post your question in the TechNet Windows XP category.
Here is the link:
http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads
I hope this helps.
Thank you, and in what concerns:
Shekhar S - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly. -
VPN connection problem: keep connection
I'm having a problem with the maintenance of VPN connection. I connect okay but the line VPN disconnects after about 2 minutes each time. I use XP Professional V2002, Service Pack 3. I have disabled the WIndows firewall, as I have F-Secure software suite with its active firewall. I connect laptop wireless via a Belkin router. I had no problem for months up until August when suddenly this problem appeared. I have disabled firewall F-secure, but that did not help. I also disabled the firewall on the router, but again without success. Can you please help?
Hi Rashmis,
Thanks for visiting the site of the community of Microsoft Windows XP. The question you have posted is related to VPN issues and would be better suited to the Technet community. Please visit the link below to find a community that will provide the support you want. http://social.technet.Microsoft.com/forums/en/categories/
Shawn - Support Engineer - MCP, MCDST
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
VPN connections disappear, RASDIAL makes reappear
Here is a screenshot of the connect to a network dialog box. Notice that my VPN connection is not displayed. Nothing shows the:
http://i44.Tinypic.com/2iu3rpg.jpg
In order to get the dialog box to regain his senses, I drop simply to an elevated command prompt and run
rasdial [name of the VPN connection]
You don't need credentials. You don't need it to sucessfully connect; You just push with a stick rasdial:http://I39.Tinypic.com/16bdd2u.jpg
The connect to a network dialog box now works:
http://i40.Tinypic.com/qpqd6h.jpg
You can see screenshots of Windows Vista. I saw this bug on Windows XP.
My question is: How can I get Microsoft repaired?
Hi Jack,
Well, Gack! If it happens only every several weeks to months, it will be very fun in the not so fun sort of way to track down.
Here is my point of view.
First of all, on a side note, I would never, ever use Windows without an antivirus package, if you go on the internet at all, which you seem to do.
'Common sense' has worked well before the age of the car by possible viruses. Just go for a page (even supposed to known good) can give you an infection. I'm not saying it's likely, all easily possible.
I highly recommend that you run some virus scans (these forums have several good suggestions) just to be sure, but it doesn't sound like you have a virus to me.
Well, I'll get off my soap box now. :-)
Then, restart is a standard "fix." If this solves the problem, then virtually all support guys in the world are going to tell you, "there is difficulty, have a nice day." I won't argue your point well, it is wrong. Just please realize that there are literally billions of combinations possible, hardware and software. There is no way that each of them could possibly work together without problem. I'll just tell you that it is a workaround and you should use if it works.
Finally, if you want to keep looking for a better solution, I am with you on that. Solutions help all of us.
So, here's what you can do then.
When it happens the next time, mark the time.
Then go into the event viewer and begin to track down any errors at the time, that happened as well as the warnings and all the events that went past just before the problem started. We don't need (or want) the full thing, just the header with the name of event ID, source, journal, and level.
You should know what happens if anything started, stopped or tried to run or tried to brake.
Any service which is of what precedes.
Also, I'm looking more on Technet.
Since you said that you work, so for now, I'd mark this thread as closed and start again when and if the problem happens again.
Of course, I hope this helps!
Matt Hudson
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
Maybe you are looking for
-
missing cd/dvd drivers on the new install of win7
I have a HP Pavillion H8-1230. Replaced the hard drive with a new 2 to Seagate. Tried to make a new, clean installation of Windows 7 Pro but I get an error that says: "a required cd/dvd device driver is missing." I always thought that basic device
-
everything gone small get adobe flash failed message
images printing etc went very small when Facebook games, I get a message saying adobe flash was able to start
-
Not able to install the update to Security Advisory 2718704 security.
Original title: Security Advisory 2718704. Hello I am running Windows XP Tablet SP2 because SP3 trashes my graphics card.Should I worry about FLAME? What do you recommend?When I tried to apply the patch, I got a message that I need SP3! Thank you
-
Files becomes locked after be moved. Help, please!
I am running XP Home SP3. I recently had to repair my OS of the OSDisk from my computer, because of an accident of BONE. Almost everything works fine now, except when I move any kind of file or folder (regardless of the means of transport [copy, cut
-
Internet Explorer information bar is missing.
When I need to download the latest control Flashplayer or Active-x, the INFORMATION Internet Explorer BAR is missing. Therefore, I'm unable to download these updates. I searched MS knowledge base, tried to Fix It, etc. (microsoft.com) for a solutio