VPN connections disappear, RASDIAL makes reappear

Similar Questions

• VPN connection error - pppd limited

  Hi I think I have a problem with OX, the captain and the networks, I sail perfectly with the team but since update stops running the VPN, I tried the possibility to go to recovery mode to 'disable csrutil' then ' sudo chmod u + s / usr / sbin / pppd "but it does not work when you use Netextender or FortiClient." I have another Mac with Lion and works properly the only difference I notice in the file 'pppd' Captain makes me 'limited, compressed' and only 'compressed' Lion I put a photo and a newspaper of netextender:

  15/09/2016 10:15:59.271 [603 General info] NetExtender 8.1.788 for Mac OS X initialized

  15/09/2016 path of the bundle app NetExtender 10:15:59.299 [General info 603] = /Applications/NetExtender.app

  15/09/2016 createLogPanel() 10:16:01.045 [gui info 603]

  15/09/2016 10:16:01.730 [config info 603] loading saved profiles...

  15/09/2016 10:16:16.507 [connect info 603] user: "prueba".

  15/09/2016 10:16:16.507 [connect info 603] domain: "abcd.hos."

  15/09/2016 10:16:16.509 [connect info 603] Server: 'vpn.abcd.es:444 '.

  15/09/2016 10:16:16.581 [603 general notice] connection to vpn.abcd.es:444...

  15/09/2016 10:16:16.820 [General error 603] ERROR: SSL_connect: Undefined error: 0 (0)

  15/09/2016 10:16:16.821 [General notice 603] retry...

  15/09/2016 10:16:16.822 [General error 603] ERROR: SSL_connect: Undefined error: 0 (0)

  15/09/2016 10:16:16.823 [General error 603] authentication failed: connection failed. See the log for more details.

  15/09/2016 10:16:16.823 [General error 603] NetExtender connection failed.

  15/09/2016 10:16:16.823 [General notice 603] SSL VPN disconnect...

  15/09/2016 10:16:17.058 [General error 603] ERROR: SSL_connect: Undefined error: 0 (0)

  15/09/2016 10:16:17.058 [General notice 603] retry...

  15/09/2016 10:16:17.060 [General error 603] ERROR: SSL_connect: Undefined error: 0 (0)

  15/09/2016 10:16:17.061 [General error 603] disconnect command failed

  15/09/2016 10:16:17.063 [General notice 603] SSL VPN connection is completed.

  15/09/2016 10:16:17.063 [config info 603] loading saved profiles...

  15/09/2016 10:16:17.065 [gui info 603] connection failed. See the log for more details.

  

  I think that the problem is a network file or because I put the wrong password and I cannot detect this error. as I said the VPN working properly with another MAC using the same network.

  Help...

  You shouldn't be messing with the security features of the operating system.

  Problems may have to do with the network, or client software that you use.

  I start by making sure all the software are updated and then create a new entry, vpn, double control system that everything has been entered correctly.

  FWIW, I use the built-in features of VPN on El Capitan to connect to my University regularly and without problem.

  I'm not familiar with "Fortinet", and I suspect that you may need to be updated, or simply use the built-in VPN.

• Is it possible to get Win 7 auto start VPN connection?

  Hey all,.

  Is it possible to get Windows 7 auto start VPN connection? Or can you recommend a 3rd party VPN client application?

  Thank you

  Hello

  You can make a batch file exe or cmd and autostart. The command line should be like this:

  RASPHONE d * where is * a name of your VPN connection

  For example: your Vpn connection is called my VPN

  The command line will be:

  RASPHONE d my VPN

• How to configure the user name & psw for VPN connection in WRT54G?

  Hi all:

  I would like to enable VPn in WRT54G.

  Cann't find where to set up the username & psw.

  Could someone help?

  Client is necessary to set up the username & psw if he did not need to put in place the username & psw to WRT54G?

  Thank you in advance

  Chen min

  It doesn't have a VPN service. It doesn't have a VPN server. You make a connection to the VPN client to the WRT54G.

• The VPN client VPN connection behind other PIX PIX

  I have the following problem:

  I wanted to establish the VPN connection the client VPN to PIX on GPRS / 3G, but I didn t have a bit of luck with PIX IOS version 6.2 (2).

  So I upgraded PIX to 6.3 (4) to use NAT - T and VPN client to version 4.0.5

  I have configured PIX with NAT-T(isakmp nat-traversal 20), but I still had a chance, he would not go through the 1st phase. As soon as I took nat-traversal isakmp off he started working, and we can connect to our servers.

  Now, I want to connect to the VPN client behind PIX to our customer PIX network. VPN connection implements without problem, but we can not access the servers. If I configure NAT - T on the two PIX, or only on the customer PIX or only on our PIX, no VPN connection at all.

  If I have to connect VPN client behind PIX to the customer's network and you try to PING DNS server for example, on our PIX, I have following error:

  305006: failed to create of portmap for domestic 50 CBC protocol translation: dst outside:194.x.x.x 10.10.1.x

  194.x.x.x is our customer s address IP PIX

  I understand that somewhere access list is missing, but I can not understand.

  Of course, I can configure VPN site to site, but we have few customers and take us over their servers, so it'd just connect behind PIX VPN and client connection s server, instead of the first dial-in and then establish a VPN connection.

  Can you please help me?

  Thank you in advan

  The following is extracted from ASK THE DISCUSSION FORUM of EXPERTS with Glenn Fullage of Cisco.

  I've cut and pasted here for you to read, I think that the problem mentioned below:

  Question:

  Hi Glenn,.

  Following is possible?

  I have the vpn client on my PC, my LAN is protected by a pix. I can launch the vpn client to connect to remote pix. Authenticates the vpn client and the remote pix makes my PC with the assigned ip appropriate to its pool of ip address.

  The problem that I am facing is that I can not anything across the pix remote ping from my PC which is behind my pix. Can you please guide me what I have to do to make this work, if it is possible?

  My PC has a static ip address assigned with the default gateway appropriate pointing to my s pix inside interface.

  Thank you very much for any help provided in advance.

  Response from Glenn:

  First of all, make sure that the VPN connection works correctly when the remote PC is NOT behind a PIX. If that works fine, but then breaks when put behind a PIX, it is probably that the PIX is PAT, which usually breaks IPSec. Add the following command on your PIX VPN client is behind:

  fixup protocol esp-ike

  See http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_sw/v_63/cmdref/df.htm#wp1067379 for more details.

  If it still has issues, you can turn on NAT - T on the remote PIX that ends the VPN, the client and the remote PIX must encapsulate then all IPSec in UDP packets that your PIX will be able to PA correctly. Add the following command on the remote PIX:

  ISAKMP nat-traversal

  See http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_sw/v_63/cmdref/gl.htm#wp1027312 for more details.

  NAT - T is a standard for the encapsulation of the UDP packets inot IETF IPSec packets.

  ESP IPSec (Protocol that use your encrypted data packets) is an IP Protocol, it is located just above IP, rather than being a TCP or UDP protocol. For this reason, it has no TCP/UDP port number.

  A lot of features that make the translation of address of Port (PAT) rely on a single to PAT TCP/UDP source port number ' ing. Because all traffic is PAT would be at the same source address, must be certain uniqueness to each of its sessions, and most devices use the port number TCP/UDP source for this. Because IPSec doesn't have one, many features PAT fail to PAT it properly or at all, and the data transfer fails.

  NAT - T is enabled on both devices of the range, they will determine during the construction of the tunnel there is a PAT/NAT device between them, and if they detect that there is, they automatically encapsulate every IPSec packets in UDP packets with a port number of 4500. Because there is now a port number, PAT devices are able to PAT it correctly and the traffic goes normally.

  Hope that helps.

• VPN connections are suddenly trying to connect through a non-existent modem instead of wireless.

  I have several set up VPN connections that I use for a few months. Today, I tried today to connect to one of them and realized that the dialog box connection said dial instead of connect. It is now trying to connect through a modem, which I don't have.

  I deleted the VPN configuration and set up a new, but I get the same thing. When I go into the properties of the VPN connection, for 'connect using', he says 'deleted Modem - (unavailable device). There is no option to select the appropriate device.

  I have no idea what this happened, but I connect now connect to any VPN because they all are trying to use this modem that does not exist. I can connect to the Internet fine. I can connect to the thin wireless networks. It's just the VPN connections.

  Open IE and make sure the box never establish a connection isCHECKED.

  http://CID-25ab668da65c8fbe.photos.live.com/self.aspx/Windows%20images/Neverdialaconnection.PNG

  MS - MVP Windows Desktop Experience
  "When all else fails try what the captain suggested before you started...". »

• WRVS4400N with AG300 and VPN connections

  I bought a WRVS4400N router hoping to add wireless and VPN capability at a remote office LAN. I want to be able to establish a VPN connection from my PC to the central office to the WRVS4400N to remote desktop, access and administer systems at the remote office. Remote desktop systems is unnecessary access to systems to the central office.

  Before you deploy the WRVS4400N to remote desktop, I'm stable and by configuring it to our central office.

  Our central office is a router Linksys AG300 and ADSL service for Internet connection. It works well and I don't want to change it.

  I have connected the WRVS4400N to our central office LAN and it has an IP address on its WAN port assigned by the DHCP server on the AG300.

  What I do not understand how to establish a VPN connection to a system on the Internet at the WRVS4400N on the local network. I have a laptop with the QuickVPN software installed. If I connect my laptop to the AG300 (i.e. the same switch as the WAN port on the WRVS4400N) I can establish a VPN connection to the WRVS4400N but if I connect to my laptop to the Internet (via my ADSL service at home), I am unable to set up the VPN. I don't know how to configure the AG300 so that the VPN from my laptop reaches the WRVS4400N.

  I transfer ipsec enabled on the AG300, but this does not seem to run the VPN with the WRVS4400N.

  Can someone tell me what I need to do?

  Is there some other DSL modem I could use that facilitates the connection? There is another DSL modem (I don't know make/model until I visit the site) used in remote desktop, but I could replace it if I knew that the replacement work.

  Update: I got it to work. See https://supportforums.cisco.com/thread/2108785 for the advice that has been most useful.

  The essential steps have been before the ports indicated in this article (and UDP 500) to the WRVS4400N and I dropped a bit of the MTU (do not know if this was really necessary). Now I can establish connection QuickVPN, except when the Windows Firewall interferes.

  Hello

  Thank you for posting. In the AG300, transmit the following ports to the IP address of the WAN WRVS4400N port: 443, 500, 4500, 60443. This allows you to establish a QuickVPN for the WRVS4400N using the WAN IP of the AG300.

• ACS seems to forget IPs assigned to VPN connections

  Hi, I hope I am posting this in the right place and give the illusion that I have a pretty good idea of what I'm talking about. Otherwise, I apologize and would be recognizing all relevant entry.

  My problem is that after authenticating correctly to ACS/RSA, VPN users receive a correct of the Pool of IP in their respective IP address, but GBA seems to forget that the IP address was assigned after a while so, for example, it shows 0 assigned IP address when the firewall reports that there are 4 active connections. What will happen inevitably, is that someone will eventually get assigned to an IP address previously assigned to an already existing connection, causing 0 connectivity on the network to the VPN user.

  I assume this is a failure of communication between the firewall and the ACS in terms of which connections are still alived and IPs should be available.

  Can someone idea me in mechanisms to interact the ACS and the firewall with regard to connection information active any experience or knowledge with this problem or maybe?

  Thanks in advance.

  
  Thank you for the response. It is currently set for 2 hours, but I guess I'm confused as to some of the terminology in regards to it releasing IP addresses not in use.
  For example, if there is a valid VPN connection for 4 hours, it seems that the ACS will recover the IP after 2 hours, so does that mean 2 hours in, the IP will get re-assigned regardless? Or is there supposed to be some mechanism in place that says the connection is still valid so the IP is kept assigned beyond the 2 hour period?
  Thanks again.
  

  Hello

  I do not think that there is a mechanism if ACS provides to the client the ip address, but yes, you can adjust the time of realease. I suggest you make time to 5-6 hours, we set up in our data center, the time is so great, it's the fact is that the user may not work for more than contnous for 5 to 6 hours if at all then connection will break and once agin it will be assigned to the new ip address once the user connects. It won't be problem in the normal network.

  Hope to help

  So useful don't rate

  Ganesh.H

• VPN connection with external modem

  Cisco 2651XM router

  using a wic adsl card I was able to establish a vpn connection from a computer on to my 2651xm router cisco vpn client successfully, but I can't get a connection using an external modem.

  My local network at the end of the vpn server is on 172.16.1.xx and goes into the router on f0/0, which stood at 172.16.1.30.

  Port f0/1 is 192.168.1.100 and goes to an external modem set as default gateway

  192.169.1.254. with this configuration I can surf the internet on the computers in the lan at the server end.

  Problem is that I can't get a connection from a remote machine VPN connect. It worked when I used the wic adsl connection, but then I used only

  the port of f0/0 that was connected to my local network. But now I'm including the f0/1 port to connect to an external modem, vpn client cannot connect. The cisco vpn client tries to connect by using tcp on port 10000 and I have to configure it in the modem, but do not know if I did it correctly. I tried to transmit the port both 192.168.1.100 (f0/1) and 172.16.1.30 (f0/0), but neither will not work. My config running is attached. Thanks for the pointers.

  ----------------------

  #show running-config router

  Building configuration...

  Current configuration: 2757 bytes

  !

  version 12.4

  horodateurs service debug datetime msec

  Log service timestamps datetime msec

  no password encryption service

  !

  vpn hostname

  !

  boot-start-marker

  boot-end-marker

  !

  no set record in buffered memory

  no console logging

  enable secret 5 xxxxxxxxxxxxxxxxxxxxxxxxxxxxx

  activate the password xxxxxxxxxxx

  !

  AAA new-model

  !

  !

  AAA authentication login default local

  AAA authentication login sdm_vpn_xauth_ml_1 local

  AAA authentication login sdm_vpn_xauth_ml_2 local

  AAA authorization sdm_vpn_group_ml_1 LAN

  AAA authorization sdm_vpn_group_ml_2 LAN

  !

  AAA - the id of the joint session

  !

  resources policy

  !

  no location network-clock-participate 1

  No network-clock-participate wic 0

  IP cef

  !

  !

  !

  !

  name-server IP 192.168.1.254

  name-server IP 192.168.1.255

  IP ddns update method sdm_ddns1

  DDNS both

  !

  !

  !

  !

  !

  username secret xxxxxxxxxxx 5 xxxxxxxxxxxxxxxxxxxxxxxxxx

  !

  !

  !

  crypto ISAKMP policy 1

  BA 3des

  preshared authentication

  Group 2

  !

  ISAKMP crypto client configuration group workgroup

  vpnkey key

  pool SDM_POOL_2

  ISAKMP crypto sdm-ike-profile-1 profile

  match of group identity working group

  client authentication list sdm_vpn_xauth_ml_2

  ISAKMP authorization list sdm_vpn_group_ml_2

  client configuration address respond

  virtual-model 2

  !

  !

  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

  Crypto ipsec transform-set ESP-3DES-SHA1 esp-3des esp-sha-hmac

  !

  Profile of crypto ipsec SDM_Profile1

  game of transformation-ESP-3DES-SHA1

  isakmp-profile sdm-ike-profile-1 game

  !

  !

  !

  !

  !

  ATM0/0 interface

  no ip address

  Shutdown

  No atm ilmi-keepalive

  DSL-automatic operation mode

  !

  interface FastEthernet0/0

  IP 172.16.1.30 255.255.0.0

  IP nat inside

  IP virtual-reassembly

  automatic speed

  Half duplex

  No mop enabled

  !

  interface FastEthernet0/1

  Description $ETH - WAN$

  updated client dns IP dhcp-server no

  IP ddns update hostname vpn.vpn

  IP ddns update sdm_ddns1

  dhcp customer_id FastEthernet0/1 IP address

  NAT outside IP

  IP virtual-reassembly

  automatic duplex

  automatic speed

  !

  tunnel type of interface virtual-Template2

  IP unnumbered FastEthernet0/1

  ipv4 ipsec tunnel mode

  Tunnel SDM_Profile1 ipsec protection profile

  !

  router RIP

  version 2

  network 172.16.0.0

  network 192.168.1.0

  No Auto-resume

  !

  local IP 192.168.1.110 SDM_POOL_1 pool 192.168.1.120

  local IP SDM_POOL_2 172.16.1.21 pool 172.16.1.29

  !

  !

  IP http server

  no ip http secure server

  IP nat inside source list 3 interface FastEthernet0/1 overload

  !

  Remark SDM_ACL category of access list 1 = 2

  access-list 1 permit 172.16.0.0 0.0.255.255

  Note access-list 2 = 2 SDM_ACL category

  access-list 2 allow to 192.168.1.0 0.0.0.255

  Remark SDM_ACL category from the list to access 3 = 2

  access-list 3 permit 172.16.0.0 0.0.255.255

  !

  !

  !

  !

  control plan

  !

  !

  !

  !

  Line con 0

  line to 0

  line vty 0 4

  password: xxxxxxxx

  !

  !

  end

  Hello

  On the ADSL Modem, you must before 500, port 4500 UDP and 10,000 to the IP address of the router.

  Basically, tell you the Modem to 192.168.1.100 transmitting any packet received on 192.169.1.254.

  On the client VPN choose encapsulation UDP NAT, make use of NAT - T standard.

  Please rate if this helped.

  Kind regards

  Daniel

• Running the logon script after AnyConnect VPN connection

  Is it possible (such as the Launcher on the IPSec client) to run a login script after establishing a VPN connection? When a user connects to the VPN client AnyConnect I need to be able run a login script to map drives. I looked the ASDM, but see anywhere that it seems that this would be configured. I thought I would check to make sure I'm not missing something.

  We lack ASA IOS v8.2 (2), ASDM 6.2 (5).

  Thank you.

  You can learn more about the AnyConnect script capabilities on the link below...

  http://www.Cisco.com/en/us/docs/security/vpn_client/AnyConnect/anyconnect25/Administration/Guide/ac03features.html#wp1068902

• SSL VPN 25 user license - impossible to get more than 2 SSL VPN connections

  Hello

  I just installed a user license user Premium 25 for SSL VPN on my Cisco ASA5505.  Even though it states that the license is installed I get still only two client Anyconnect SSL VPN connections and the third fails systematically.  What Miss me?

  Thanks for posting to the forum and that the problem has been resolved, and what caused the problem and what has been done to solve the problem. It's the most useful forum when people can read on a problem and can also read what the problem turned out to be and what was done to solve the problem, I think that it is also a good example to remind us that sometimes, the problem is not in our configuration, or even in the area that we administer. So sometimes we have to look beyond our normal home to find the source of the problem.

  The question mark it resolved makes it even more obvious to readers that they will find a solution to the problem. So thank you to mark the issue as resolved.

  HTH

  Rick

• Customer Cisco PIX 501 VPN connects but no connection to the local network

  Hi all:

  I am able to make a VPN connection to a PIX 501. The remote client is assigned an IP (192.168.2.1) also, but not able to access all the machines in the local network connected to the PIX.

  I have attached the PIX configuration.

  Advice will be greatly appreciated.

  ********************

  6.3 (5) PIX version

  interface ethernet0 car

  interface ethernet1 100full

  ethernet0 nameif outside security0

  nameif ethernet1 inside the security100

  enable password xxxx

  passwd xxxxx

  pixfirewall hostname

  domain ciscopix.com

  fixup protocol dns-length maximum 512

  fixup protocol ftp 21

  fixup protocol h323 h225 1720

  fixup protocol h323 ras 1718-1719

  fixup protocol http 80

  fixup protocol rsh 514

  fixup protocol rtsp 554

  fixup protocol sip 5060

  fixup protocol sip udp 5060

  fixup protocol 2000 skinny

  fixup protocol smtp 25

  fixup protocol sqlnet 1521

  fixup protocol tftp 69

  names of

  access-list 101 permit ip 192.168.1.0 255.255.255.0 192.168.2.0 255.255.255.0

  access-list 102 permit ip 192.168.1.0 255.255.255.0 192.168.2.0 255.255.255.0

  pager lines 24

  Outside 1500 MTU

  Within 1500 MTU

  IP address outside dhcp setroute

  IP address inside 192.168.1.1 255.255.255.0

  alarm action IP verification of information

  alarm action attack IP audit

  IP local pool ippool 192.168.2.1 - 192.168.2.5

  location of PDM 192.168.2.0 255.255.255.0 outside

  PDM logging 100 information

  history of PDM activate

  ARP timeout 14400

  Global 1 interface (outside)

  NAT (inside) - 0 102 access list

  NAT (inside) 1 0.0.0.0 0.0.0.0 0 0

  Timeout xlate 0:05:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225

  H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00

  Sip timeout - disconnect 0:02:00 prompt Protocol sip-0: 03:00

  Timeout, uauth 0:05:00 absolute

  GANYMEDE + Protocol Ganymede + AAA-server

  AAA-server GANYMEDE + 3 max-failed-attempts

  AAA-server GANYMEDE + deadtime 10

  RADIUS Protocol RADIUS AAA server

  AAA-server RADIUS 3 max-failed-attempts

  AAA-RADIUS deadtime 10 Server

  AAA-server local LOCAL Protocol

  Enable http server

  http 192.168.1.0 255.255.255.0 inside

  No snmp server location

  No snmp Server contact

  SNMP-Server Community public

  No trap to activate snmp Server

  enable floodguard

  Permitted connection ipsec sysopt

  Crypto ipsec transform-set esp - esp-md5-hmac RIGHT

  Crypto-map dynamic dynmap 10 transform-set RIGHT

  map mymap 10-isakmp ipsec crypto dynamic dynmap

  mymap outside crypto map interface

  ISAKMP allows outside

  ISAKMP identity address

  part of pre authentication ISAKMP policy 10

  encryption of ISAKMP policy 10

  ISAKMP policy 10 md5 hash

  10 2 ISAKMP policy group

  ISAKMP life duration strategy 10 86400

  vpngroup vpn3000 ippool address pool

  vpngroup vpn3000 Server dns 68.87.72.130

  vpngroup vpn3000-wins 192.168.1.100 Server

  vpngroup vpn3000 split tunnel 101

  vpngroup vpn3000 downtime 1800

  password vpngroup vpn3000 *.

  Telnet timeout 5

  SSH timeout 5

  Console timeout 0

  dhcpd address 192.168.1.2 - 192.168.1.33 inside

  dhcpd lease 3600

  dhcpd ping_timeout 750

  dhcpd outside auto_config

  dhcpd allow inside

  Terminal width 80

  Cryptochecksum:xxxx

  ****************

  The DNS server is the one assigned to me by my ISP.

  My internal network connected to the PIX is 192.168.1.1 - 192.168.1.33 and the VPN ip pool is 192.168.2.1 - 192.168.2.5

  "isakmp nat-traversal 20" can do the trick.

• The Cisco AnyConnect VPN connection host bridge/NAT comments

  I think I know the answer to that, but I hope I'm wrong. I have 9 Workstation on a Windows 7 laptop, and I wonder if it is possible to get my guest VM (Windows and non-Windows (if it matters)) to have access to my VPN connection when I am connected. Preferably through NAT, if it is then connected by a bridge. I found this post where the poster indicates that you can deselect 'connect the adapter to the virtual host' and he's got to work, but this does not work for me, unless I'm missing something or it depends on the type of VPN connection or installation. I read that you can not address IPSec VPN, but I don't know what type I'm sure I can't say the AnyConnect client.

  Thank you
  Brian

  By default the anyconnect software won't allow all connections to the VPN tunnel. So once the connection is established you can not connect to the host on the local network more.

  If you do a 'route print' on the host before and after the VPN connection is established, you will find that the VPN connection has set the parameter WOG network for the lowest value which makes the default and sets a mask that blocks all other connections. You can remove the mask route to access the host on the local network, but you will not get a direct connection to the virtual machine VPN tunnel.

  If you search the forum here for VPN, you can find a post about this.

• Add a vpn connection in ios 10, method chosen in IKEv2, but I don't have the remote ID. My VPN is created in Sonicwall

  Add a vpn connection in ios 10, method chosen in IKEv2, but I don't have the remote ID. My VPN is created in Sonicwall, waiting for quick reply

  Hi cmscan,

  Thank you for using communities of Apple Support.

  I see that you add a VPN connection using IKEv2, but you do not have the remote ID. I know it's important to be able to set up a virtual private network, you can connect using your iPhone. I'm happy to help you with this.

  You must contact your system administrator to ensure that the settings that you must configure the VPN connection. Please see the iPhone user Guide for more information.

  Have a great day!

• Mac OS El Capitan cannot share a VPN connection that is type of IKEv2

  I have a few VPN connections, I share via Wi - Fi on my mobile device. Here's what I do:

  I have a Macbook Pro with Ethernet port, I have some work VPN connections (some type of IPSec, some IKEv2). First I plug the cable to the Ethernet port, then I start a VPN (settings-> network-> Connect) connection, finally, I share the VPN (settings-> sharing-> Internet sharing) via Wi - Fi connection so that my mobile device can connect and use the VPN connection.

  This work really well for me with IPSec VPN connections. But today, I tried to switch to an IKEv2 VPN connection, the VPN works well, but I can't share it on a mobile device via Wi - Fi, because I couldn't see the connection in the list "share your connection from" (Preferences-> sharing-> Internet sharing system)

  Are there any technical problem that IKEv2 cannot be shared? Or is there that all parameters must be made so that all VPN connections must appear in the list to share?

  evpn https://support.purevpn.com/IKEv2-Configuration-Guide-for-OS-x-El-Capitan-by-pur