What would cause a vista 32 bit sp2 to suddenly demand a pw of connection where it never existed

Similar Questions

• My system (Vista 32-bit SP2) tried to install update KB980248 for several weeks, but I keep getting error code 80073712.

  My system (Vista 32-bit SP2) tried to install update KB980248 for several weeks, but I keep getting error code 80073712.  I tried to follow the directions on the site by running the system preparation tool update... did not work.  Then I tried to go back to a restore point and try the update again.  Yet once, didn't. I went back several restore points, but it has always failed.  I don't have an installation DVD, because it came with Vista preloaded.

  Help?

  PaulS22401,
  Walk through the steps described in this article: http://support.microsoft.com/kb/957310

  Let us know the results.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error code 80070490 Vista 32 bit /SP2/

  For month auto update tried to install Vista 32 bit SP2.  I read all the options in the solutions of Ms.  That is to say. stand-a-lone, by ensuring that the intell. the service is auto/default.  Nothing helps.  I have a printer HP PSC 1350 all in one I would use but cannot without this update.  Can anyone help? Please?

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates
  http://support.Microsoft.com/kb/958044

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• What would cause the "from address" info (FA). some emails, downloading the pop3 server, will be replaced by an 'f' 'common '?

  I get multiple research work emails (E/JS) and ecommerce. Some of them have a "Correct".
  'St. Michael Job Assistance Ministry - JAM' FA (SMJAM-JAM).

  For some reason, however, some of the emails from other sources, downloading the verizon pop3, E/JS server are indicated (wrongly) as having the FA SMJAM-JAM above. This situation prevents my email filters to plug these emails to their appropriate mail folder.

  Also, when the steps in order to transmit emails showing incorrect information of FA SMJAM-JAM, the e-mail is no longer present incorrect information of FA SMJAM-JAM but shows rather the correct information of FA that had been specified on the verizon pop3 server.

  address ROM"(FA) in some emails, when downloading from the pop3 server, is replaced by a 'common' 'FA '. [email protected]

  What would cause the "from address" info (FA). some emails, downloading the pop3 server, will be replaced by an 'f' 'common '?

  Hello

  If I understand your problem, I think it may have to do with the addresses stored in your address book. Thunderbird can display the name of your address book instead of the name of the post office, where corresponds to the e-mail address.

  Check your address books to see if you have a bad entry for mail addresses get listed wrong.

  Also check under Tools-> Options-> advanced-> reading & display if you have checked the option to see show it only the names of the people in my address book. If you uncheck this option, the name and the address must be...

• What would cause a SQL server to blue screen with FFFFF81001BA5198 code

  What would cause a SQL server to blue screen with FFFFF81001BA5198 code

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Windows Server forum. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• KB981793 update Vista 64 - bit SP2 error 8024200d

  Windows Vista 64 - bit SP2. Update cannot be installed with 8024200d error code. ALEKS

  Error 0x8024200D code is:
  SUS_E_UH_NEEDANOTHERDOWNLOAD
  The Setup program requires more data to download

  Try manually downloading and installation: http://www.microsoft.com/downloads/details.aspx?FamilyId=41988289-8fa9-4d3d-a959-d3e64ccc6071&displaylang=en

  or

  How to reset the Windows Update settings?
  http://support.Microsoft.com/kb/971058

  then try wu

  TaurArian [MVP] 2005-2011 - Update Services

• Vista 32-bit SP2 install 0x800b100 error message

  Vista 32-bit sp2 will not install on my laptop. I keep recieveing TRUST_E_nosignature (0x800b100) error message. my laptop is an Acer Aspire 5720-4126 (5720z). also this could have something to do with windows defender not updated and does not as well? Please answer as soon as possible.

  Microsoft today released the Checksur tool and one of the main advantage of the CheckSUR tool is that it contains updated files to help installation problems target Vista SP2. MS expects the tool to help troubleshoot Vista SP2 install error 0 x 80070490 0x800B0100.

  You can get the last pieces of CheckSUR upward on the Down Load Center (DLC). For more information and links, see KB947821 .

  I had similar problem and this new checksur tool works very well

• I was wondering what would cause my add language option butoon must be disabled, whiles add East Asia was available.

  Need to install Thai and arbic on my xp OS.

  Hi there I was wondering what would cause my add language option butoon must be disabled, whiles add East Asia was available. any help to solve this problem. I need to install Thai and arbic on my xp OS.

  See you soon

  Hello

  You can check these links:
  
  To install the files for East Asian on your computer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/int_pr_install_languages.mspx?mfr=true how to enable support of the Arabic language in Windows XPhttp://support.microsoft.com/kb/821080how to add and enable additional languages in Windows
  http://support.Microsoft.com/kb/177561
  

• Home premium Windows Vista 64-bit SP2 installed - will be not updated, still just trying to find loop updates

  Home premium Windows Vista 64-bit SP2 installed - will be not updated, still just trying to find loop updates.  He worked for years until now.

  How to fix?

  Thank you

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-update/Vista-Windows-Update-does-not-work/8385103e-4117-4b0c-B21F-27a266fdf4a9

• Flash Player 11.9.900.117 not recognized by Opera and Firefox on Windows Vista (32-bit) SP2

  I use 4 browsers on my laptop Toshiba Windows Vista (32-bit) SP2:

  Internet Explorer 9

  Google Chrome Version 30.0.1599.101 m

  Opera Version 17.0.1241.45

  Mozilla Firefox Version 24.0

  I just downloaded and installed Flash Player 11.9.900.117, which is recognized by IE9 and Chrome from Google, but not in Opera and Firefox, even after closing the browser and re-start.

  How can I get Flash Player to work with Opera and Firefox?

  Thanks for your help.

  See you soon,.

  Joel
  

  There are two different versions of Flash Player for Windows (3 If you count Chrome)

  ActiveX which is ONLY for IE,

  Flash Player for other browsers which is for Opera, Safari and Firefox, and

  "PepperFlash" that is built into Chrome by Google.

  Download the tool or another browser version will have NO EFFECT on Chrome.

  Download of the ActiveX version WILL NOT install a plugin for Opera or Firefox because they do not use controls ActiveX - NO browser but IE uses not since about 2001.

  Download Adobe Flash Player for Firefox and Opera setup directly by clicking on the following link.

  Flash Player plug-in (all other browsers)

• Pinnacle Studio 12 Ultimate will not properly organize under Vista 32 bit SP2

  I have problems to Pinnacle Studio 12 Ultimate to work on my Dell Vista 32 b sp2 PC. After apparently installed successfully and a 12.1 update download, everytime I try to run it, the Pinnacle splash screen returns to about 70% and a Windows error message said then there was a problem and the studio file has stopped working. There is no additional information or any other message. I installed as administrator and disabled antivirus while doing so. Since then, I installed on a laptop Windows 7 to check that the installation disc is not defective and it works like a dream out there.

  I tried a repair in Vista with the startup disk and uninstalled, corrected the registry and reinstalled but still the same problem.

  So, I think to the settings of Vista on my PC - ideas please?

  Finally sorted OK.

  I have a card ATI Radeon HD2600XT, the driver was the cause of the problem and, despite the fact that there are later available drivers, I tried a bit and this one works:

  8.791.0.0 driver version dated 10/26/10

  Concerning

  Nik

• What would cause my C: / / drive to be completely changed?

  Greetings:

  I have windows 7 pro 64-bit. Something happened between Saturday night and Sunday, and I'm very worried that this is the result of piracy.

  My question is to try to know what could cause this, and so what are the best measures to prevent anything like this in the future:

  My C drive was completely changed. He was unrecognizable, and inaccessible for me.

  I don't know what in the world happened. I've always had the drive C (which is computer, local disk C, users, etc. and has programs and of course copies of all who are also in the library, which is placed above this player is windows so that created and joking with her.)

  I went to use a software I had downloaded VCL, to convert video in a format that would play in Windows Media Player (done before with no problems) but rather discovered instead of my C drive, there was only one element: an icon I didn't recognize and it was named the "software".

  I have NO IDEA who in the world has happened. It was literally terrifying.

  Luckily I backup my notebook each week using an external hard drive and windows back up. I went back a month and restored, and it worked - put everything back. Then I got time to download windows updates and updates from mcafee etc..

  But at least he's here.

  What brought me to this issue was that WMP does not work: I have used no problem with it. And the VCL software for some reason, which seems to get corrupted every week. I uninstall and reinstall three times so far.

  WHAT could have caused this? The only thing I can think is piracy. Someone did. I surely did not. No ONE lives with me, no one has access to my laptop certainly my cat didn't do.

  I've had in the past screen sharing with my internet provider, but you will need to connect with them. I have Verizon fios. They never did anything but in the few times I had screen sharing they close and that's it.

  I also had a screen sharing with mcafee, a year ago.

  (1) that the recent screen sharing, I had is with the technicians of a company where I bought my security cameras. They had to make adjustments on the camera etc. and show me how to download.

  I never had 'streaming' because I read that it can make the computer more vulnerable. But cameras can stream video and streaming was conducting. I stopped since. I don't need to see and download on video by security cameras and really don't remember same on definition.

  (2) the security cameras are hard wired and go through my router. So, they use my IP address. BUT I have a password to connect to the cameras to examine what has been recorded. Nobody knows & I do not give.

  (3) my laptop mainly use wi - fi, as I sat in my dining room. Nobody knows that I will not let others use or I give it for NO REASON.

  OK, can so anyone who might know its IP address have a way to get into his computer, which is connected to a router?

  Is it possible that someone who completely change a C drive? How? What we have to do?

  Someone at - he heard the VLC (Videolan) and find out if there are any problems with them? It is downloadable for free, works very well - player when it works.

  This would cause software conflicts?

  Has anyone even heard of this happening?

  MORE IMPORTANTLY, what is the best way for me to guard against this?

  I have a firewall that is supplied with the router. I also have windows Defender, I have mcafee (thought I don't know so how efficient they are).

  I know it's long and I could have been more convincing, but I wanted give details, for example, you know that no one shares my laptop.

  Finally, if you set your software to enable streaming of anything, music, video... you are less security from your computer? I'm NOT allowed at all because of what I read in the info from windows and I honestly do not remember how he got the value streaming.

  The week before this happened, I had a few strange things happen like my firefox browser stuck, I saw a device called "window phone listed under devices when I do not use a windows phone and the tab where you can transfer a file for example documents to pictures, I saw"the transfer by bluetooth"when not to use any bluetooth."

  I don't know if they are related

  Can anyone recommend a GREAT firewall and supported? I read about the Comodo, but it's free, and as such, I don't think that it is supported. I don't want to stop all traffic in and out.

  Thank you very much

  Gina

  Gina

  I am sure that VLC it did not.  Fortunately you have been forward-thinking enough to have a back up.  Don't not piracy or the other.  If I had to guess, I strongly suspect McAfee.  He is known to be problematic

  I can recommend a malicious software solution that incorporates a good firewall so called ESET smart security.  This is the test of the balls, easy to use and you can almost forget about it

• What would cause the mouse to scroll slowly on Web pages, but normally on text documents?

  I have a strange problem. I have a Logitech M305 mouse on another machine which is too slow scrolling on Web pages. I ordered a new mouse, but today I noticed the old mouse normally scroll in text documents, even though the text document is displayed in Firefox (such as the "subject: config" page).

  Normally, a page will scroll 3 lines for each click of the mouse wheel.
  On Web pages, it changes and it takes 3 clicks of the mouse wheel to get the page to scroll.

  It is troubling to move the mouse wheel and don't have anything happen until the third click.

  So the question is, what would make the mouse wheel behave differently on the Web pages and pages of text, and how can I solve this problem?

  BTW, this is a clean install of Windows 7 64-bit. I use the same exact type of install now on another machine with a mouse Logitech M510 and normally scrolls on all pages.

  OK, a final report on this issue. Yesterday, before installing the new mouse M325, I decided to uninstall the Logitech SetPoint software. I wanted a new installation of the software for the mouse to go with the new mouse.

  To my surprise, after the set point has been uninstalled the old mouse M305 scroll normally on pages of text and Web pages. It seems that something mysterious happened in the relationship between Firefox and the original installation of set point. Firefox made some adjustments or updates of its own regarding record just as it does for modules, I saw it happen a couple of times before. /shrug

  New mouse + set works perfectly with FireFox now and the old mouse M305 + setpoint is now works well with an old laptop XP Pro, at least as long as the button pop-up gimpy holds.

  Solution, in this case: uninstall the Logitech SetPoint mouse software, and then reinstall a new copy of it.

• What would cause a Subvi show its FP even when it is not defined to show (by default)?

  I have a Subvi suddenly decided to show even when it should.  What kinds of things would cause this?

  Thank you!

  
  

• What would cause lines and blue screen sometimes?

  My computer is only a couple of months. I recently receive a screen with nothing else than lines on the screen and it appears bluish. What could cause this problem?

  Hello

  Try the following, although from what you describe, it looks like a hardware problem.

  Open windows control panel, open Device Manager and open graphics cards - annotate the device listed here and then use Recovery Manager to reinstall the graphics driver question - how to use the Recovery Manager to reinstall the drivers and software is detailed in the document in question on the link below.

  Recovery Manager - Windows 7

  Recovery Manager - Windows Vista

  Once the relocation complete, restart the laptop.

  If the problem persists, you should contact HP and arrange for the laptop repaired under warranty.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Kind regards

  DP - K