Wheel scroll/zoom only in one direction in some programs

Similar Questions

• My Microsoft Wireless Mouse 5000 new scrolls only in one direction in Quicken. This seems to be the only program with problems. All the answers?

  My Microsoft Wireless Mouse 5000 new scrolls only in one direction in Quicken.  This seems to be the only program with problems. All the answers?

  Hi retiredinflorida,

  Welcome to Microsoft Vista answers Forum!
   
  It is a known issue using IntelliPoint from Microsoft and Quicken software drivers.  Both parties are aware of the problem and as soon as a hotfix or patch for this problem is available it will be displayed on the Quicken Web site so check with their website on a regular basis.
   
  However, if the Microsoft Wireless Mouse 5000 problems in other applications, you can check the links below.

  The Microsoft wireless mouse does not work as expected if:

  You may want to consider this link to fix the problem: http://support.microsoft.com/default.aspx?scid=kb; EN-US; 838398

  In the case want ot uninstall and reinstall the mouse drivrs use this link: http://www.microsoft.com/hardware/windows7/support.mspx

  Hope this information is useful.
  Let me know if it worked.

  Thank you, and in what concerns:
  Aziz Nadeem - Microsoft technical support.
  Visit our Microsoft answers feedback Forum
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and let us know
  what you think

• X 200 fingerprint reader Tablet reads only in one direction

  Hi all

  I bought an X 200 Tablet and I got free upgrade to Windows 7 from Lenovo. After I've manually upgraded from Vista to Win7 (not a fresh install), what's up.

  The fingerprint reader works very well and he even kept my impressions of Vista. However, with Windows 7, I can just slide my fingers in one direction (from right to left, if you use the 200 X in the direction of the normal laptop). If you are a user of Tablet, you would know that there is a left and right 'tooth' that surrounds the player, allowing you to slide your fingers in both sense.

  I tried to reinstall the software of fingerprint - as well as my stored reset reader fingerprints - but it only let me slip in one direction. If I slip my fingers from left to right, I get an error 'no match '. I erased my impressions and stored once again, drag from left to right with the screen to its normal position. Lenovo Fingerprint Software my impressions, but when I connect to Windows, I can still only slide from right to left. Is it a question of Win7?

  I finally thought to it! I went to my device manager > biometric devices > one click with the right button on authentic Tech > properties. The pilot appeared to be outdated, so I tried 'Update Driver' for fun. Windows 7 has actually found an updated online version, and now it is updated to v.8.1.2.56, dated dated 07/07/2009. Now, I can slide my fingers from left to right or from right to left!

• The wheel scrolled too far with one click

  I JUST INSTALLED THE 3500 WIRELESS MOUSE AND CAN'T SCROLL A FEW LINES AT A TIME WITHOUT USING THE SCROLL AUTO CAN ANYONE HELP PLEASE

  Some mice are going to configure the sensitivity of your mouse wheel. Check the software for your mouse to this context. You can find your software for the mouse settings in the Start Menu or by going to Control Panel-> mouse.

• Scroll wheel to zoom only?

  Can someone tell me if I can put it so my scroll on my mouse wheel will only zoom?  Now, if I'm on an adjustment layer, it adjusts the metrics (IE... levels, which raise or lower the midtones etc...) if I do not go through a click on the background layer.

  It's so boring and waste a ton of time for me.  I want to zoom in any layer I'm on and only be used for the zoom.  Is this possible?  I think remember me my older versions in doing so.  I'm on CS6

  Also is there such parameter when you add a new adjustment layer, click b (to brush) it will automatically on the layer mask?  Whenever it seems that it appears more adjustment layer... so pretty much makes my use of the unusable keyboard shortcuts.

  I don't know if I messed up a few settings, but I don't remember these things already being a problem before.
  Hoping someone can help me please and thanks a lot!

  I think that some things are characteristic. Some people may like what he does, while others hate. The short cut for switching between the mask and the layer is:

  CTRL/cmd-\ to the mask

  Cnd-CTRL-2 for the layer.

• Can I do a slider that moves only in one direction?

  Hi all

  I have a XY Chart. I would like a slider that appears as a vertical line that the user can drag horizontally. Actually, it would be the regular cursor, but lack the horizontal line. I, or of course, as to get also the position of the vertical line on the axis of x. is there a simple way to achieve this, say with the integrated slider, or will it cunning methods?

  Best regards
  Ed

  Select a style of cursor that displays only a vertical line, adjust the position of the cursor-y for example infinity (+ inf) so the 'divide' will not appear.

  You can read the x position using a node property or even better the event 'move cursor' terminal event.

• S2S VPN works only in one direction

  I am very new to cisco devices, but we have recently acquired a catalyst 2911 device for our co - lo cabinet and I will try to get a vpn connection from site to site between installation and my network of offices as well as a remote access VPN for me to use in case I need to fix something then that apart from Labour Bureau.

  Gateway to the Office is 66.119.163.2 and the device is a TZ210 with his network is 192.168.1.0/24

  Co bridge is 204.244.50.254 and the device is 2911 ASR with its LAN network in 10.0.10.0/24

  The VPN S2S connection is in place between the two locations and 2911 device and servers LAN can ping and RDP for office machines.  Office network can only ping the IP Address of the LAN interface on the 2911 that is 10.0.10.1 but not the servers on the network.  the VPN site-to-site was created with the wizard CCP.

  How can I allow the network 192.168.1.0/24 see 10.0.10.1/24 network and why I only see now the gateway?

  If need be I can post my file running-config with the redacted pre-shared keys.

  You need only the first line of the ACL 125, well pls wanted to remove the 2nd line:

  1. access-list 125 allow ip 10.0.10.0 0.0.0.255 192.168.1.0 0.0.0.255
  2. access-list 125 allow ip 192.168.1.0 0.0.0.255 10.0.10.0 0.0.0.255

  Also change the action of 'pass' to 'inspect' for the following

  class type inspect sdm-cls-VPNOutsideToInside-3

  Pass

  Hope that solves this problem.

• HotSync only works in one direction

  I recently moved from a PC running XP for an Imac OSX 10.5.

  I have a Tungsten E and install Palm Desktop 4.2.1 installed on Imac, open when the connection active.

  HotSync seems to work well, with no error message in the log, but looking at the result, sync'ing of the calendar is only went in one direction. A new entry in my handheld was transferred to the Imac, but a new entry on the Imac did not appear on the handheld. This never happened with the PC, in that any new entry was Sync, regardless of where it was entered.

  Any suggestions to make it work in both directions are welcome! Thank you, Alfred

  I've got it-, I think.

  For some reason, my name (the only authorized user) not was not entered in the part of little 'user' on the bar - just a message "no user". Once I fixed that it works very well! I have no idea why it didn't recognize me from the start, but I tried to synchronize both ways since then, and it worked fine.

  Thank you guys for pointing me in the right direction - I had not advanced far enough in the manual to understand how to set up.

  Cheers, John

  Message relates to: Tungsten E

• BUG: Alt + stop scroll Zoom with monitor 4K Windows

  Monitors Windows 8.1 with 4K users and have Windows' upscaling activated, please let me know if you can reproduce in the comments! If you have a Mac, you can try to reproduce too, to see if it's just a Windows thing.

  I recently install a monitor of 28 "4K for my Windows machine and upgraded to Windows 8.1, because it has better follow independent scaling. I also still have a screen 1920 x 1080. (I do not recommend this configuration and Windows 8.1 does not handle it well.) But that's another story)

  Premiere Pro is up to date: 2014.2 version: v8.1, caravan

  By default, Windows has this slider set to the recommended average setting:

  

  It upscale almost seen everything in Windows, including a Premiere Pro interface.

  There is a problem: while placing the cursor on my calendar, hold down the ALT key and my mouse wheel scrolling is not zoom properly. He zooms in, but the location in that zoomed in is incorrect.

  Here's how Alt + scroll to zoom usually works:

  -where your cursor is where zoom you. If the cursor is positioned on the CTI, you zoom with centric ICT. If your cursor is at the level of the 2-minute mark, when alt-scroll to zoom in, the 2 minute mark will be centered in the timeline panel.

  With Windows 8 scaling of the market, math that anime centering algorithm of Alt + scroll are completely overwhelmed! It is difficult to describe in words, so here's a chart that shows exactly what happens when I place my cursor over the red spots and try alt + scroll:

  

  If the software worked as expected, red & yellow arrows ecaple eachother, because your zoom must be placed right where the cursor is.

  It drives me crazy, I pressed Alt + stop scroll method to zoom. Zoom tool and the keys +/-are not enough; granular and resizing of the horizontal scroll bar is a more recent addition to the first that I didn't need to use immediately, such as alt + scroll stop worked very well for me until the upgrade to 4K.

  Now, I considered my second 1080 p monitor might have added to the math problems, as it has a different amount of the scale applied on it, but I've completely disabled the second monitor and performed tests and had the same bug, so the chances of my second monitor having an effect on this bug are incredibly thin.

  Of course there are solutions:

  • Tour Windows DPI scaling. Fixed the problem instantly, but everything is really tiny on the screen and is not really recommended
  • Do not use the Alt + stop scroll method to zoom.

  I guess it's only a bug in Windows, but if anyone wants to test this on a Mac with a Retina display, which would be useful!

  Can anyone else reproduce this bug? If so, can be bug reports to ensure that the message is in any of the files? I've heard of the brand that it is the best way to ensure that the first team takes a serious problem. If a bug is reported only by a single user, there is a chance that very few users encounter the problem, and they will not give priority to a solution.

  Hi Tim,.

  First of all, I'm sorry that you are affected by this frustrating issue. If I understand your question, it's a problem only Windows and it does not occur on Mac.

  Tim K says:

  Monitors Windows 8.1 with 4K users and have Windows' upscaling activated, please let me know if you can reproduce in the comments! If you have a Mac, you can try to reproduce too, to see if it's just a Windows thing.

  I recently install a monitor of 28 "4K for my Windows machine and upgraded to Windows 8.1, because it has better follow independent scaling. I also still have a screen 1920 x 1080. (I do not recommend this configuration and Windows 8.1 does not handle it well.) But that's another story)

  Right. It is not currently recommended to the scale of your display beyond 100% with Adobe digital video applications and Windows 8.1. This can be problematic for wider screens, like the one you mention. If I understand correctly, we work with our partners of Microsoft to correct some of these anomalies, but in the meantime, we have resolved issues UI that makes a few items too small to read in some panels.

  Tim K says:

  Premiere Pro is up to date: 2014.2 version: v8.1, caravan

  In fact, there is conflicting info. While the current version is (first Pro CC) 2014.2, you say you have 8.1 caravan, which is not common. Who says you can have the October version installed and have not yet fully updated your application to 8.2, the release of December. The version of December is those with a few corrections of the user interface on the type unreadable in some panels.

  The only other suggestion I can offer is to change the font size, the Group of project items in the Panel menu. Helps me to see the elements of the list view much more easily.

  Please file a bug report, so that we can add your details to our database.

  Thank you
  Kevin

• behavior of scroll/zoom mouse in the Source monitor

  Hi guys, long time lurker but first time poster. I was wondering if someone could help me with something. Basically, I love mouse scroll/zoom of the features Adobe in the timeline panel, but I hate it in the Source monitor.

  In the timeline you can mouse scrolling the entire timeline to the left, right, up, down. You can use ALT upwards or downwards to zoom, etc. Meanwhile, in the Source monitor, scroll left, right, up, down, alt, etc... He advances to the read head. Which seems redundant when you already JKL.

  It is not so much a problem when you look at images in the Source, but if you are looking to audio (a song or trying to locate a specific point in the dialogue to say), it's really nice to be able to use the mouse to zoom in and out, and scroll around the audio waveform as you would with film in the timeline panel.

  Does anyone know of a framework that could allow this? The only solution I found is hover my mouse the small bar "resizer" (for lack of a better word) which is just above the button in the Source monitor Panel. If the mouse is positioned in this small drop little real estate, you can use the wheel to zoom and scroll the Source monitor Panel... But it would be nice if you could just do that by default. No chance we prefer settingI am not aware of?

  Ask good, but you must put it:

  http://www.Adobe.com/cfusion/mmForm/index.cfm?name=wishform

• Problem with wheel scrolling and buttons on Microsoft mouse optical basic v2.0 in Vista

  Hello recently, I logged on to my computer and found out that my laser mouse does not shine by the sensor and the pointer didn't budge when I moved the mouse wheel works only the buttons and scroll

  Why what happened?

  wheel scrolling and buttons on my mouse works nothing else don't

  EDIT: im using a basic v2.0 mouse Microsoft Optical

  Nope it na no:(mais c'est correct, je pense que c'est un problème matériel et j'ai acheté une nouvelle souris qui fonctionne très bien)

  but thanks for your help when even :) as I'm not sure how this forum works, but I think a mod should close this question

• BlackBerry smartphones to synchronize contacts from Outlook XP XP for BB 8830, one direction

  I want to only sync from my PC (Windows XP pro) BB 8300 to go one direction ONLY and NOT the reverse.  How can I set up?

  Thank you

  msmouser

  Check the seal capture to configure PC sync to device screen.

  1. open the Desktop Manager

  2. synchronize

  3. click on sync under Configuration

  4. click on sync

  5. Select address book

  6. Select configuration

  7. Select your desktop customer email and press Next

  8. Select Onc waysync device (Device <-> mail client)

  9. check replace all data in the application of traget if you want to erase all data on your device.

• ALT + scroll = zoom mouse?

  Plans to implement the classic alt + scroll zoom in later versions? I find it very painful to have to constantly do it manually when you are working on details.

  Otherwise, congratulations for a pretty sweet application.

  Hey, H4wkins -.

  Another thing you can do is scrolling the hot text of zoom on the stage.  Up and down on the scroll wheel is expected to increase by 1%, and now shift is expected to increase by 10%.

  

  Hope that helps!

  -Elaine

• When I open Thunderbird it shows download 1 of 27 messages, but only downloads one 1 and stops, I then mark as spam and delete it from the junk e-mail folder

  When I open Thunderbird it shows download 1 of 27 messages, but only downloads one 1 and does not download the other 26. I mark as spam and delete it from the junk e-mail folder. I press the button to get the Messages and the same thing happens again with the same message that was deleted before downloads and other 26 messages fail to download. How can I get rid of this email and download the rest of my emails?

  What is a POP account? Please confirm.

• Since the installation of Firefox 5 the page (like a mouse wheel) scroll buttons don't work anymore. I have a laptop Acer Aspire 5720 Windows Vista. Help, please!

  any IDE?

  Install WizMouse. It will allow you to overcome the problems of mouse wheel that Mozilla cannot fix or don't choose to set:

  http://antibody-software.com/Web/index.php?ref=WizMouse

  I had problems with wheel scrolling for Firefox 4, and each later version look worse rather than better.