When DC power is off

Similar Questions

• Caught in a loop when printer power on/off

  Will not start or stop.  I've tried unplugging, nothing helps.  I have a C6150.

  An error message appeared only once and it is: Oxc05d0381.

• Power went off looking at the TV Media Center. Now whenever I try to watch live TV, the program starts normally but freezes as soon as the audio starts.

  Original title: Media Center 2005 Edition

  I was watching TV using Media Center on my PC HP Media Center m7367c PC (running Windows XP Professional Version 5.1.2600 Service Pack 3) when the power went off.   Now whenever I try to watch live TV, the program starts normally but freezes as soon as the audio starts.  The audio works fine, but no picture, the small rotating circle of progress hangs and the screen is frozen.  I can click the X (close Box) and the program closes.   I expect there are only one or two corrupt files that need to be cleaned or replaced.

  HP support is to use recovery discs to clear the system and return it to the original configuration.   Given all the software, data and updates, I have to restore, I don't want to go down this road.

  I tried running SFC/scannow but Windows XP system discs are needed and the PC vendors ceased to provide systems with their PC discs there are many moons.  I bought Windows XP Professional with Service Pack 3, but he came on one drive and requests SFC disk #3 while parsing.

  I go back to the original driver TV tuner and then updated to the more recent but not joy.  I think that the problem is with a program or file Media Center.  Now when I try to configure the TV signal my cable box is recognized and then as soon as the audio lights, MCE 2005 hangs and the tiny TV screen remains black.

  I expect a file Media Center must be cleaned or reset but before I realize FUBAR I thought that he better come on this Microsoft forum and see if someone who knows what they are doing can provide the solution.

  Hi, Rudy386MS,

  Sorry for the late reply.  Do you have the problem solved?

  If Sfc/scannow solicits the disks, then you have corrupt or missing files whose analysis cannot replace or repair.  The alternative is a complete recovery of Windows.

  Open the control panel and select Media Center

  Click on uninstall

  Select the repair option

  Click next

  Click Finish when you are prompted

  See if that helps.  If not, then the recovery process will be needed

  Startup of HP systems to screen recovery (repair) when you reboot and start typing the F11 key.  According to me, that it gives you the choice to 'Fix' that leaves your files intact or 'Recover' system that will put you back to 'out of the box' condition.

  There is a Recovery Manager in the folder all the HP programs which includes Disc Creator.  You can create your own recovery discs.  I suggest using DVD instead of CD - R.  They allow more memory space.

• Dell Inspiron 14R IS responsible only when laptop is turned off

  Appearance yesterday my laptop stops loading when the laptop is power on... Although he applies, when the power is off. I checked the adapter type AC of Bios is None. I removed the battery and try to start the laptop with the power adapter plugged in, but it does not start... What could be the problem. Charger or motherboard or anything else... Please help me

  In descending order of probability:

  Not start replace the AC adapter.  Use an adapter AC OEM Dell ONLY - NOT a third-party adapter.

  If this does not resolve the problem, replace the power connector on the system:

  www.Parts-People.com/index.php

  And if this does not resolve the problem, replace the motherboard.

  If the adapter is unknown, the battery will not load.

• Toshiba 32RV635D does not power off when the computer turns off

  Hello

  I inherited a Toshiba 32RV635D. I have a PVR based on linux (Mythtv) connected to the TV via HDMI, connected on a Nvidia GT610.

  With my previous TV, a Vistron LCD Panel at low prices, he would go to sleep when the put PC into hibernation and light up when the PC came back.
  This required no configuration of me, he's done right. The Toshiba TV does not work.

  With this Toshiba TV, when the POR turns off the TV turns off screen but is actually still on - power led remains lit in green.

  Same thing with the other way around - if I put the TV in standby and powered the POR, the TV does not respond and I have to manually put out of Eve.

  I updated the firmware and it has not changed anything, and I can't find anything related to power management in the menus of televisions. I even tried just pulling the HDMI cable to the back of the TV so it has no physical active entry, and yet, it does not fall to sleep.

  The Amazon page for TV mentions the power management features, and I expected from what I understand, it should behave the way she.

  I read a lot on HDMI-CEC, but to use it with my existing kit, I would need to buy an adapter USB - CEC, and which seems a little odd because my previous TV not cheap-as-chips just done this...

  Also, the different uses in linux suggests considers its sounds the right - 'xset q' running when the computer is idle tells me that "the monitor is turned off" when in fact it is not.

  Clues?

  Ricklous, it can be useful if you have a look at the url
  http://www.Toshiba-OM.NET/LCD/PDF/English/Country_Specific/RV635-323742-English-specific.PDF

  If you want to download the manual of the English edition for your model, I have not read through, but it may be useful to you.

  Either by the way, I have the model 32RL900A and find only a VCR plugged into the claims of taking SCART screen every time it turns on while the TV is set to a string of FTA (Free To Air) and then 'hands back' screen when he (PVR) goes out, and this, I discovered, is a characteristic of the system SCART.

  I don't know if this information is useful to you, but hope it helps.

  donhe7

• Does not pass in battery mode when power is off. Indicated power baattery Panel is fully charged.

  The Red led lights continuously, even when the unit is off.  The only way to stop is to turn off the power. The lights continue to Flash during the night.  Could be sign of a defective battery even if the Committee reflects fully charged?

  Hi, DwightNemnich,

  Press f12 to the start screen

  Select dell diagnostics

  Let the first set of tests

  now select extended test

  Select the system tree

  Click (+) next to battery test

  all tests run on battery.

  Maybe it's a defective battery.  Have you removed the battery, test it in another unit?

  Did you check the connections?

  Reinstall the battery

  http://en.community.Dell.com/support-forums/laptop/f/3518/p/19373302/19854730.aspx#19854730

  http://en.community.Dell.com/search/searchresults.aspx?q=Vostro%20blinking%20lights&groups=73&sort=default&WPS=5

• Power problems: computer turns off when the power supply cord is unplugged.

  original title: power problems: computer shit turned off when the power supply cord is unplugged.

  I have a HP Pavilion dv2000

  Windows vista home premium/sp2

  AMD Turion (TM) 64/2 1.80 ghz processor

  1 GB memory

  32 bit operating system

  I have 2 problems with this laptop.

  !. I have lost the power cable and bought an expensive one online step (model: PA-1650-02 c. input 100-240v 1.5 put out a(1,5A) 18.5V 3. 5 = a)

  When I first plugg cord battery charge light came on the balance, then he started to come on and outside.

  now its completely off, even with the power cord plugged in. on the lower right part of the screen its showing that cord is connected to the power supply and the battery is fully charged, but as soon as I unplugg the power cord or remove the computer cut right away.

  the second problem is that the left mouse botton does not work, the work aside right very well. I went in the proprties to put it right, click on to, but who does not work either. I've updated the drivers but still nothing.

  Any help will be greatly appreciated.

  Hi aloum,.

  (a) what kind of mouse you are using?

  (b) the left button of the mouse seems to be stuck or it does not meet the click? This only happens with certain applications?

  Step 1: Test the mouse on another computer or another mouse on the test computer

  To determine whether the mouse or the computer is defective, follow these steps:

  1. test the mouse in question on a system that works, you know. If the problem appears to follow the mouse, you may need to return or replace the mouse.

  2 test a mouse you know is working on the computer in question. If the problem seems to stay on the computer, then the problem is most likely related to the software.

  In regard to the battery not holding charge

  Battery problems are often associated with the battery itself. If you encounter this problem, contact your mobile PC manufacturer. If you purchased the battery separately from the notebook computer, contact the manufacturer of the battery.

  Troubleshooting battery problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-battery-problems

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• The screen of my laptop turns off when the power cable is connected. If this isn't the case, connected screen is ok. No idea why?

  The screen of my laptop turns off when the power cable is connected. If this isn't the case, connected screen is ok. No idea why?

  Original title: clear the display

  Click Start or press the Windows key and type power can locate the power to change recording settings in the section of the Control Panel from the list above and click on it. At the opening of the Power Options pane, click choose when turn off display available on the left side.

  

  Choose a new setting for brightness in the drop down menu on the battery . Look at all the other parameters that you feel you want to modify, and then click save changes in the lower right to apply the options you have selected energy saving.

  You can now close the Power Options pane when you return.

• When I power on my iPhone and plug in the charger it turns on, is this normal?

  When I power on my iPhone and plug in the charger it turns on, is this normal?

  Yes, it's normal.

  If the battery power goes off and you recharge it will reboot the phone for you when it reached a stable level so that you can get phones without hovering above the device to see if it is ready.

• Loss of the battery when the Satellite C50D - off A00L

  Hello world

  I was hoping that someone could help me. I recently bought a laptop Toshiba Satellite C50D - A00L that came with Windows 8 is installed.

  I have trouble with the loss of the laptop battery power when it is turned off.
  I had a full load and off, but when I turned it back three days later he was up to 50% of power.
  I had spent it in airplane mode (I was off internet reception) to try to stop the loss of power - the case wherever he was somehow looking for information for apps.

  I am all of these ideas, and I was wondering if it was something to do with my laptop or something that happens frequently with laptops in general.
  Any help would be appreciated!

  Hello
  There are some some options and settings that should be checked.
  First access the BIOS by pressing the F2 key and in the BIOS settings disable the Wake Up on LAN option. In most cases disabling this setting you would help prevent losses of battery power.

  Secondly I recommend that you perform a complete shutdown of Windows 8 (or Win 8.1)
  The system of Windows 8 keeps Notepad by default, but it defines the hybrid unit stop mode.

  Please check this document how to perform complete stop down.
  [Perform a complete shutdown in Windows 8 | http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm]

• Satellite Pro L500 - stops when the power cord removed

  Toshiba Satellite Pro L500 stops when the power cord is removed even with the battery to 100%. I removed the battery and all the indications associated with battery answer correctly. For example turns off, Toshiba Health Monitor also indicates when the battery is removed. If installed Health monitor indicates that the battery is at 100%.

  Someone please help. I have not installed anything new.

  Hey,.

  For me, the matter is clear: the battery can't hold a charge so the laptop will be shut down because it has no power.

  I think you need to replace the battery with a new one and you can get a provider of service authorized in your country. Simply contact the guy and ask that they can tell you how much it would cost.

  You can find a list of all FSA here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

  Good luck! :)

• Satellite Pro L20: battery not charge when the power adapter is connected

  Hello

  all advice appreciated.

  I had a Satellite Pro L20 for about 18 months. Recently, battery does not charge when the power adapter is connected. The battery light starts yellow (which means more liberated, I think?), then will both green, the machine sat for awhile. However the ACPI often said that AC is "offline."

  There are two recent occurrences that coincide with this problem, I try to eliminate:

  1. my friends rat chewed by the feeder for pets! Power is Mobile OK insofar as he fled sector - the rat seems to have simply chewed by the outer cover (I see some threads, but I think that is just a shield, although I'm not an electrician).

  2. I put the laptop in hibernation for the first time. That seemed to mess up the system a bit, which was what initially drew my attention to the problem. This question is a bit complicated because I'm under Linux (Xubuntu).

  I updated the drivers etc from windows when I bought the laptop. Never had any problems until now and have been running linux for centuries. Also, I have mainly the laptop the power supply turned off, but do not remove the battery (is that really a problem these days?)

  I obviously need to replace the adapter, but is - it is likely (and how I can check) that the battery was borked until?

  see you soon
  Chris

  First, please check if the other are lit.
  If the AC led and power led are on the adapter sector is ok and it provides the power to the laptop.

  > The battery light starts yellow (which means more liberated, I think?), then will both green, the machine sat for awhile
  If the battery LED is yellow, this means that the battery is not fully charged and if the Green led changes then recharging is caught and the battery has been recharged.

  So I really don t see any problems with the charge process.

  Maybe the battery is old and so you cannot use it for an extended in such a case only the replacement of the battery could help.

• Satellite L655 - questions turn on when the power adapter is unplugged

  Hello

  I have a problem with my new Satellite L655. When the power adapter is disconnected and wireless is disabled, the laptop can turn on for less than a second turn it off again. OR turn 'power' and 'Wireless' turns on, but black screen and hd light; After startup bios of 30-40 seconds, the wireless light turns off and hd lights; OR turn on normally;

  Toshiba has changed the motherboard a few days ago, but the problem persists. Update BIOS. My laptop is the only one affected

  Thank you in advance,
  Maurizio.

  Hey Buddy,

  > Toshiba has changed the motherboard a few days ago, but the problem persists
  So have you contacted already technicians again? You must tell them that the problem is still not resolved and it must be another reason for this problem. Then get in touch with technicians again to clarify this issue.

  Have you connected external devices while laptop is turned off?
  -Online if yes remove each of them.

  Load default settings in the BIOS?
  -Online if it is not this. Enter in the BIOS, and then press the F9 key to load defaults.

  Otherwise, it would be time to service as I have already written. It must be a nuisance material

• Yoga 2 pro 13'3 andro tab stops automatically when the screen is off & dosnt start evn battery is30 - 80%

  Hello

  I am facing this problem with Yoga 2 pro 13'3 pellets. It stops automatically when the screen is off and dosnt start until it is connected to the charger and press the same power button 30 to 80% battery. I don't know what it is. This happens every time

  No help for it?

  
  

• U2715H - Windows automatically resized when the screen turns off then turn it back on

  • Windows 8.1 Pro
  • 1 single monitor connected to the PC
  • native resolution 2650 x 1440 at 60 Hz the value
  • through CDM of the monitor to the RFP the ti EVGA 750 SC (cable Dell)
  • all drivers updated on 28/12/15

  I just bought this monitor and I noticed this strange behavior. Whenever I have turn off the monitor (or it will turn off by itself), if I didn't have a maximized window, all windows (regardless of size) gets automatically resized to fit in the left upper quadrant when the screen turns back on again.  If I had something full screen, this behavior does not occur.

  I find this very annoying. This behavior happened with my previous monitor, which was only 1080 x 1200.

  I was unable to find any setting for the U2715H disable this "feature". This isn't because EasyArrange from Dell. I do not use this feature. And this always happens with Display Manager not installed.

  Is it just a 'feature' of Dell U2715H? Is responsible for Windows? Help, please.

  TIA

  There was no pilot or changes to the hardware of my first post.  BTW, my monitor is a Rev A02.

  A few days after my previous message, another question emerged.  Monitor flash intermittently ON / OFF every few seconds.  I unplugged/replugged the cable CDM - DP and that seems to fix things... until the next day.  This time, I nothing could fix the random rotation power SWITCH of the monitor.  Desperate, I decided to plug an old HDMI cable, I had to hang out.  Flashing problem has been resolved.  Not only this, using HDMI solved my original problem of auto resizing windows.

  The solution to my original problem: use an HDMI cable.  I went to the Dell CDM - DP cable and the problem has been resolved; no more windows resize automatically when the monitor turns off in sleep/towers.  I always get the native resolution at 60 Hz and there is no noticeable disadvantages to the use of the HDMI versus DP interface.  I've been using the HDMI cable for about a week and there is no other issue.

  Just for additional verification, I bought an Accell UltraAV DP - DP 1.2 cable (B142C-007 b-2), one of the few officially approved by VESA (see link below).  Using this cable does NOT my automatic window resizing problem original.  I do not use it long enough to see if they would prevent the random flashing question.

  I still don't know the exact cause of my original question.  I guess it's a driver problem with DisplayPort standard.  But if you do not need DP 1.2 functionality, I suggest that you just use your GPU HDMI output (if she has a).

  www.DisplayPort.org/.../How-to-Choose-a-DisplayPort-Cable-and-not-get-a-Bad-One