Caught in a loop when printer power on/off

Similar Questions

• When DC power is off

  Hello world

  Check here if Defense Center is turned off, but Managed devices are running then

  Sensor blocks traffic that is bad?

  You must also confirm that DC is powered so no event will not be sent to DC right?

  When DC is in reverse it will get the events of connection during the time that DC has been turned off?

  Concerning

  Mahesh

  Sensor blocks traffic that is bad?

  Yes. They have the last policy that was pushed and will act on this matter.

  You must also confirm that DC is powered so no event will not be sent to DC right?

  Fix.

  When DC is in reverse it will get the events of connection during the time that DC has been turned off?

  Fix.

• Power went off looking at the TV Media Center. Now whenever I try to watch live TV, the program starts normally but freezes as soon as the audio starts.

  Original title: Media Center 2005 Edition

  I was watching TV using Media Center on my PC HP Media Center m7367c PC (running Windows XP Professional Version 5.1.2600 Service Pack 3) when the power went off.   Now whenever I try to watch live TV, the program starts normally but freezes as soon as the audio starts.  The audio works fine, but no picture, the small rotating circle of progress hangs and the screen is frozen.  I can click the X (close Box) and the program closes.   I expect there are only one or two corrupt files that need to be cleaned or replaced.

  HP support is to use recovery discs to clear the system and return it to the original configuration.   Given all the software, data and updates, I have to restore, I don't want to go down this road.

  I tried running SFC/scannow but Windows XP system discs are needed and the PC vendors ceased to provide systems with their PC discs there are many moons.  I bought Windows XP Professional with Service Pack 3, but he came on one drive and requests SFC disk #3 while parsing.

  I go back to the original driver TV tuner and then updated to the more recent but not joy.  I think that the problem is with a program or file Media Center.  Now when I try to configure the TV signal my cable box is recognized and then as soon as the audio lights, MCE 2005 hangs and the tiny TV screen remains black.

  I expect a file Media Center must be cleaned or reset but before I realize FUBAR I thought that he better come on this Microsoft forum and see if someone who knows what they are doing can provide the solution.

  Hi, Rudy386MS,

  Sorry for the late reply.  Do you have the problem solved?

  If Sfc/scannow solicits the disks, then you have corrupt or missing files whose analysis cannot replace or repair.  The alternative is a complete recovery of Windows.

  Open the control panel and select Media Center

  Click on uninstall

  Select the repair option

  Click next

  Click Finish when you are prompted

  See if that helps.  If not, then the recovery process will be needed

  Startup of HP systems to screen recovery (repair) when you reboot and start typing the F11 key.  According to me, that it gives you the choice to 'Fix' that leaves your files intact or 'Recover' system that will put you back to 'out of the box' condition.

  There is a Recovery Manager in the folder all the HP programs which includes Disc Creator.  You can create your own recovery discs.  I suggest using DVD instead of CD - R.  They allow more memory space.

• Dell Inspiron 14R IS responsible only when laptop is turned off

  Appearance yesterday my laptop stops loading when the laptop is power on... Although he applies, when the power is off. I checked the adapter type AC of Bios is None. I removed the battery and try to start the laptop with the power adapter plugged in, but it does not start... What could be the problem. Charger or motherboard or anything else... Please help me

  In descending order of probability:

  Not start replace the AC adapter.  Use an adapter AC OEM Dell ONLY - NOT a third-party adapter.

  If this does not resolve the problem, replace the power connector on the system:

  www.Parts-People.com/index.php

  And if this does not resolve the problem, replace the motherboard.

  If the adapter is unknown, the battery will not load.

• The HP printer won't turn on or respond when the power button is pressed

  The HP printer won't turn on or respond when the power button is pressed

  The HP printer won't turn on or respond when the power button is pressed

• QUICKBOOKS 2011 & MANUAL POWER when PRINTING CHEQUES

  HOW DO YOU DEFINE QUICKBOOKS 2011 DIET MANUAL, WHEN PRINTING CHEQUES

  Well... we ended up reinstalling the printer driver then made adjustments to the dialogue of the printer for printing of control and were able to get our manual to work again...

• HP 8610: Power HP 8610 paper problems, especially when printing cheques

  I put a lot of thought and research in buying this printer a few months ago.  It seemed perfect at first, but I thought it was just a fluke periodic has turned into a regular problem.  I run two payroll every Thursday.  When printing cheques, the printer will grab two at a time, print out the correct area on the cheque at the top of the page and behind him leaving empty. Then, the last control is printed on white paper.  This throws the correct control numbers into my pay, and I also end up having a blank in the middle of my sequence number check.  I then have to reprint the two controls and change the check numbers in the payroll.  This happens in both States of payroll, almost everytime.  It does not appear that very often with regular, white paper.  The printer is still under warranty, but is there still a way to solve this kind of problem?  Thank you

  Hello @RhondaGS,

  Welcome to the Forums of HP Support!

  I understand that you encounter feeding problems when printing from your Windows 7 computer to your HP Officejet Pro 8610 e-all-in-one printer paper. I would like to help you today with this problem to feed paper. However, before I was capable of precise guide you to a solution I have to clarify a few things.

  • (1) what size, type and weight is your paper check?
  • (2) what type of program are you printing cheques through?

  In the meantime, I get you some standard paper troubleshooting steps. This will include checking your paper path for dirt that may be responsible for paper feed issues and rolls. Please click here to access the path of paper troubleshooting steps. Once the support document opens please run through the two Solution, Solution threeand four. Once the diagnosis is complete, please test print to see if the problem is resolved. Just to note, always make sure that you load a media type in your bin at some point. You do not want to mix regular paper and paper check or other paper in the tray with paper, as this can cause paper 'slide' when being introduced into your machine and create jam or extra paper feeding problems.

  Please reply to this message with the result of the audit of the paper path and rolls. If the problem persists, be sure to include the answers to my two questions above in your response. I look forward to hear from you!

• iMac 2012 - sierra installation failed, caught in the loop, please help

  Hey everybody.

  That's what I have:

  iMac 27 "mid-2011. He had on El Capitan.

  This iMac contains two hard drives and drive superdrive.

  A disc is 256 GB SSD and the other a regular 2 TB internal HARD drive.

  As SSD is faster that I keep my OS X and programs on this SSD drive, all the other stuff like photos, music, documents, are put on the classic 2 TB HDD.

  This is what happened:

  Attempt of I:

  Everything was going well until the installer has discovered that the SSD did not have a sufficient space to install. I quit the installer, the option pop up, I called "Startup Volume" has chosen my SSD and restarted it. Has been 2 attempts, if I'm not wrong, but worked. I killed and moved the files, I think now would be enough disk space on my SSD tried the Sierra ad install again.

  --> Attempt II:

  This time Sierra Installer arrived at the stage language choose where he welcomed and asked to choose the language. The next screen it tells me once again: not enough space, the bigger internal drive offers enough, but I don't want that. So, I tried the same exit to leave the program and launch then boot Volume installation...

  ... that in trouble:

  My SSD drive now no longer appears in this window of the boot Volume.

  When you try to access the boot Volume it will skip in the app language choose, sometimes shows this window choice animation multilingual, sometimes simply stays gray but will show when moving the mouse upwards arrow to the top of the screen, choose language drops in when I try to open the boot Volume after leaving the installation program. In addition, the language choice (can not be exited by cmd Q is said by the way) seems to open before the boot app Volume and the boot volume app does not appear my drive more-> Catastropheeeeee!

  Also option to restart regular off the menu above will not help. After about half to the top of the boot of the SIERRA Installer keeps new hindsight. No chance to reboot to my previous El Capitan based OSX. I am bound to this loop.

  Is turned off, wait and switch back to does not help, even in a loop.

  Then I tried also open disk utility, I also have an external time machine backup drive connected. Tried this way to restore my SSD of time machine, which fails on every attempt.

  I'm totally caught up.

  Help, please!

  just in case.

  I did the job.

  Launched my iMac in disc mode on my mac pro book. A few items to the disc hard iMac deleted, then restarted, macos sierra resumed and concluded correctly, in other words: all and working again!

  Even a message to Apple to look bad when insufficient disk space is detected, see my first post, thanks.

  Best regards

  Max

• Satellite Pro L20: battery not charge when the power adapter is connected

  Hello

  all advice appreciated.

  I had a Satellite Pro L20 for about 18 months. Recently, battery does not charge when the power adapter is connected. The battery light starts yellow (which means more liberated, I think?), then will both green, the machine sat for awhile. However the ACPI often said that AC is "offline."

  There are two recent occurrences that coincide with this problem, I try to eliminate:

  1. my friends rat chewed by the feeder for pets! Power is Mobile OK insofar as he fled sector - the rat seems to have simply chewed by the outer cover (I see some threads, but I think that is just a shield, although I'm not an electrician).

  2. I put the laptop in hibernation for the first time. That seemed to mess up the system a bit, which was what initially drew my attention to the problem. This question is a bit complicated because I'm under Linux (Xubuntu).

  I updated the drivers etc from windows when I bought the laptop. Never had any problems until now and have been running linux for centuries. Also, I have mainly the laptop the power supply turned off, but do not remove the battery (is that really a problem these days?)

  I obviously need to replace the adapter, but is - it is likely (and how I can check) that the battery was borked until?

  see you soon
  Chris

  First, please check if the other are lit.
  If the AC led and power led are on the adapter sector is ok and it provides the power to the laptop.

  > The battery light starts yellow (which means more liberated, I think?), then will both green, the machine sat for awhile
  If the battery LED is yellow, this means that the battery is not fully charged and if the Green led changes then recharging is caught and the battery has been recharged.

  So I really don t see any problems with the charge process.

  Maybe the battery is old and so you cannot use it for an extended in such a case only the replacement of the battery could help.

• HP PSC 1510 all in one printer power button flashing key.

  The power button flashes. No other lights are on.  I can not turn off the printer.

  Hello Laureldawn,

  I see this is your first visit with us here on the Forums of HP. Please, let me take a moment to say 'Welcome. '

  I have some suggestions that we can try when troubleshooting flashing lights on the printer.

  First of all, please make sure that you have the printer power cable connected directly to a wall outlet and NOT a bar/power strip.

  Here is a document that uses a LaserJet printer for example, but it is intended to be used by HP products in general.  This document explains the problems when connected to an uninterruptible power supply/Strip/surge protector power.

  Another step we can try is the document the Treaty of lights flash.

  Please let me know whether or not these measures have helped.

  If I don't hear from you today, I hope you have a great Wednesday.

  See you soon,.

• MX330 printer will not print. power WiFi ok

  I CHECKED POWER and telephone lines the printer will not print, the printer is not reconigzed

  Hello

  • What version of Windows are you using?
  • What were the changes made before the problem occurred?
  • You receive an error message when printing?

  You can check these links:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Why can I not print?

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  See also:

  Network printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  Note: this link also means on Windows 7

• Update fails for NET Framework 3.5 SP1, the system is caught in a loop

  I have Windows XP Pro - the computer crashes, when I restart it says download Windows updates. Cannot update NET Framework 3.5 SP 1 - caught in a loop. Help

  Hello

  1. What is the exact error message?

  2 did you change on your computer before this problem?

  You can follow the suggestions and then check.

  Method 1

  Step 1:

  You can start your computer in safe mode.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  S tep 2 :

  Restore the system to a date and time when the computer was working fine before.

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084

  Note: You cannot cancel changes to the safe mode system restore.

  Method 2

  Step 1:

  Place the computer in a clean boot state.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

  Click Startand then click run.

  Type msconfigand click OK.
  The System Configuration utility dialog box appears.

  Click the general tab, click Normal Startup - load all device drivers and services, and then click OK.

  When you are prompted, click restart to restart the computer.

  Step 2:

  Download and install the update from the link.

  Microsoft .NET Framework 3.5 Service Pack 1

  http://www.Microsoft.com/download/en/details.aspx?ID=22

  See also:

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

  How to troubleshoot common Windows Update, Microsoft Update and Windows Server Update Services installation

  http://support.Microsoft.com/kb/906602

• Photosmart C309a Cup footer when printing

  All of a sudden when printing a document, pdf or picture, the bottom line or two of the page is cut off even thought that the margins are set correctly.  The page starts below where I put the margins too.

  How can I fix it?

  Thank you

  Hello! Welcome to the @hiddenvalleyrv forums.

  I read your post on printing problems you encounter and I want to help you! First of all, I would like to ask if I could know that you tried to print from programs and if they all have the same printing issue. Sometimes these questions are about the software you use to print from, so it is important to test print from several programs to determine where the problem comes from.

  I would also like to know the operating system you use on your computer and how you have the printer connected to the computer (USB, Ethernet or wireless).

  In the meantime, I suggest to do a copy to see if there are apparent problems when copying. Copy the base does not involve the computer somehow and tests the printer hardware. Please let me know the results!

  Another step to try is a reset of power supply:

  Press the power button to turn the product on.
  With the product, unplug the power cord from the back of the product.
  Unplug the power cord from the wall outlet.
  Wait at least 15 seconds.
  Plug the power cord into the wall outlet.
  Reconnect the power cord to the back of the product.
  If the product does not light by itself, press the Power button to turn it on.

  I hope to hear from you!

• HP Deskjet 3515: My printer power light is FLASHING and printer will not be on

  I bought a HP Deskjet 3515 October 2013. It was working fine until a day back, I noticed the following: -.

  1. when I connect printer adapter led on the power adapter turns OFF green. When I unplug the printer, the Green led on the power supply turns ON.

  2. when everything is connected to the printer power button just FLASHES. No other does blink.

  3. the printer lights. Only the Power button continues to blink without.

  Hi @HP71013,

  I see that you are having feeding problems. I want to help you.

  Looks like the power cable or the power adapter, the origin of this problem.

  Please, try the procedure described in this document to see if it will help to solve this problem.

  HP printers - HP printer does not turn on or respond when the power button is pressed.

  If the problem persists, please Contact the HP Support for help. Check the model number and the form to receive a file number for faster assistance.

  If you appreciate my efforts, please click on the "Thumbs up" button below. Thank you.

• When I power on my iPhone and plug in the charger it turns on, is this normal?

  When I power on my iPhone and plug in the charger it turns on, is this normal?

  Yes, it's normal.

  If the battery power goes off and you recharge it will reboot the phone for you when it reached a stable level so that you can get phones without hovering above the device to see if it is ready.