When I boot Windows Vista I am prompted for a product key. I do not have the product key and need a replacement.

Similar Questions

• I bought a license of adobe product, which allows to transfer PowerPoint to word in March. But when I want to use it today, there's a wrong message "drive does not have the ability to access this service!

  I bought a license of adobe product, which allows to transfer PowerPoint to word in March. But when I want to use it today, there's a wrong message "drive does not have the ability to access this service!

  That looks like you are using an older version of reader; See https://forums.adobe.com/docs/DOC-5891

• Windows Vista Service Pack 1 for systems x 64 (KB936330), did not finish download. Error message 80091007

  I just replace the memory of the motherboard, processor and ram in this system, I did a fresh install of Windows Vista Edition full. Now I get these errors which began with the .net error is not able to install. I went and downloaded .net 4 for stand alone, and very comfortable. Seems that when you use the Windows Update is when I have problems. Why do I start having these issues now? What can I do to fix this? A new disc of Vista Ultimate would repair my problems or is it the way the system is windows reading?

  Download and install 'SP2' manually because it contains all SP1 fixes: http://www.microsoft.com/downloads/en/details.aspx?FamilyID=a4dd31d5-f907-4406-9012-a5c3199ea2b3&displaylang=en

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• I have Windows Vista - my printer shows it is offline but I'm not offered the option 'use printer online' to change.

  How can I change my printer to online when 'use printer online' is not an option?  I had this problem in the past, my teenage son he figures but it is not available.  I desperately need this problem!

  Nicole

  Have you tried to unplug your printer and if so does show that it is being detected? You can also uninstall your printer and then reinstall the printer. Follow the link below on how to add/remove the printers on your computer.

  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

• Dual boot Windows Vista and Windows 8

  Hello world

  I'm having the following problem: I had Windows 7 as primary OS (C drive) and then installed Windows 8 (on drive D) that is of dual boot. Everything was working fine until I decided to remove Windows 7 from the drive C. I have formatted the drive using Acronis Disk Director 11. After the reboot, the computer was not bootable. I had a reistallation DVD of Vista and installed. Now, I have Windows Vista on C and Windows 8 for D drive that is not bootable. My question is how to get rid of Windows 8 without having my computer starts plu?

  Thanks in advance,

  Peter

  Hello

  try to start your computer in safe mode on Vista and remove windows 8 in d ' training of formatting it and check if the problem is resolved.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  If you still have the sam e problem then see below

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  See you soon.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work, try to make a Bootable ERD to do a Startup Repair:

  As is the case with most computers/laptops these days, they do not come with good Vista disc to repair only the recovery disks.

  As your grave in the category above, download the ISO on the provided link and do a repair of the disc.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  You can make a tool to restart system, System Restore, etc. with it.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista repair disc.

  You can do a system restart tool, system, etc it restore.

  There is not a disk of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  You can save your data in Mode safe, ifit loads correctly.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  You can only do a upgrade repair facility if the Service Pack on the Vista DVD is not lower than the SP installed, in your case you have installed SP2.
  DVD SP level. must be the same or higher to be able to do a repair installation.
  Your DVD must be SP2

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Unless you do regular backups, nothng is guaranteed re data.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1 in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

• Updated my computer to Windows Vista Service pack 2 for x 64 function foires systems

  Okay, so I have recently updated this Windows Vista Service pack 2 for x 64-based systems.

  After the update and restarting, I connected only to find myself staring at a blank white screen. However, I managed to hit the keys ctrl + alt + delete and go to the Task Manager to launch explorer.exe through the "new task...". ' button.

  This brings me to my normal desktop, but none to start startup programs and CPU usage is 100% which makes the performance of my laptop more slow.

  Sometimes I try to restart the laptop and it starts normally after the connection, but that happens only about 15% or less of the time.

  Is there a way I could resolve this problem and I function normally again?

  BTW,

  I don't have the CD of Windows Vista or install, so I can't really replace him.

  Thanks in advance for your help.

  Hi DaColossus,

  Method 1

  I suggest that you perform the system restore before installing Windows vista service Pack 2 on the computer.

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Method 2

  Once the service pack 2 for Windows vista is uninstalled from the computer, I would say that repair you system files on the computer by running SFC scan.

  The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows Vista installation CD.

  For more information please visit the link below.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 3

  Now see the link below and try the steps to install Windows vista service pack 2 on the computer.

  Learn how to install Windows Vista Service Pack 2 (SP2)

  http://Windows.Microsoft.com/en-us/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-2-SP2

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• When I double click on the installer window opens asking a password for an account that I don't know the password

  When I double click on setup a window opens asking a password for an account that I do not know the password to everry time, he rises and I tried my adobe password and my password computer or work

  Software Adobe don't require password for installation.  It will most likely the security of your computer asking your permission to allow the installation.

• How boot Windows Vista from a USB hard drive that has a good backup Vista already on him.

  Hi, initially, I thought I had a virus (blue screens that appear often), then I thought I had a corrupted driver or systems file. So, I had a 2 t USB external hard drive and saved ALL my internal hard drive.  After execution of all kinds of tests from my internal hard drive, it does NOT pass the diagnostic test and always stops in the same place on the internal hard drive.  It becomes harder and harder to start on my internal drive of 'C' without getting some kind of blue screen.  I'm sure that now it's my drive "C" which is declining and malfunction and I am convinced now to go forward and every time you start my existing backup Vista SP2 that I backed up on my disk 'K', or if I can, then do a new clean install of Vista 86 x (32 bit) on the disc 'K '.  My boot sequence is as follows: 1. Disc 2 DVD 3. External drive USB 'K' 4. Internal drive C (eventually when I get all fixed, I turn OFF my 'C' drive.)  When I boot my computer without my Vista disk, it bypasses the 'K' reader, because all the "loadup data" is located in a folder and are not exposed, or I don't have the files to "load" just in the right place.  When I look at the file config.sys and autoexec.bat copied, I see nothing in the files that would be "load" my existing Vista, instead he just goes right in front of the reader 'K' and on the 'C' drive and loaded a version own intalled my Vista (if I can avoid a blue screen, sometimes I have to load in "safe mode" and even) It doesn't work sometimes!)  My question is what the loadup files are needed and where on my 'K' drive (in system32?) to be able to restart my old copy of Vista which has all my existing configurations in place?  Thanks in advance for your help.

  Hello Mrbigbry,

  I found this thread which seems to discuss what you ask also:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-files/can-i-run-Windows-Vista-off-an-external-hard-drive/16c27e12-5ae1-4320-9533-613881633831
  There are some links in the response marked as an answer that may also be useful.

• When I try to activate Windows Vista, I get a message that my key is already used. Why?

  problem with vista windows serial

  I was using original windows appearance has been formatted... after then when I installed again and tried to activate it, it says serial number is already in use. but I HAV formatted and installed windows several times but it has not happened before... then, why is it not activate now?

  If you have installed and activated too many times, this could be the cause of the failure of activation. Try the phone activation.

  How to activate Windows Vista manually (activate by phone)
  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) clearly explain your problem to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  ----------------------------  Alternatives -------------------------------------

  To enable the use of the phone
  1. open Windows Activation by clicking the Start button, right-click computer, clicking Properties, and then clicking

  Activate Windows now. ?

  2. click on show me other ways to activate.

  3 type your Windows 7 product key, and then click Next.

  4. click on use the automated telephone and then click Next.
  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  5. click on the location nearest you from the drop-down list, and then click Next.

  6. call one of the available phone numbers listed. An automated system will guide you through the activation process.

  7. When prompted, enter the installation ID that is listed on your screen in your phone keypad.

  8 Note the confirmation ID the phone system gives you.

  9. under the terms of step 3, type the confirmation ID in the space provided, click Next, and then follow the instructions.

  10. If the activation is not successful, stay on the line to be transferred to a product activation agent who can help you.

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  J W Stuart: http://www.pagestart.com

• When you use Windows Vista Home Premium search, no results wouldn't come

  When I opened early and try to get whatever it is, there's nothing at all. Or if I tap a file that I know is indexed I try advanced search, select all and fill in the appropriate information and also check that the fi not indexed box. I then start search and he seeks but nothing can't and never has. When it says try search files that does not work either. I do not understand why the search box never showed a file that I know exists and is indexed, or more importantly why nothing comes up at all? Anyone know what could be the problem? Hope you get this feature to work. I use Vista Home Premium and Explorer 8.

  Hello

  
  Method 1:

  The most likely reason is that you are looking a limited set of locations. Indexed locations, all of the files used by default, includes most of the places common you might want to search for. However, you can extend your search by adding additional locations to the current search in the search folder. Here's how:

  a. in the search pane, click Advanced search.

  b. click the menu location , then everywhere.

   

  Method 2:

  Also if the index looking for files that you know problems must be located in a location indexed; You may have to re-create the index. This can take a long time to complete. To rebuild the index:

  a. open indexing and Search Options by clicking the Start button, click Control Panel, clicking system and Maintenance, and then clicking Indexing Options.

  b. click Advanced Options, click the index settings tab and then click rebuild. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  
  Refer to the below help links -.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-searching

  http://Windows.Microsoft.com/en-us/Windows-Vista/improve-Windows-searches-using-the-index-frequently-asked-questions

   

  I hope this helps.

• Windows Vista IE9 is is it inserted a way I can set up the so function keys when I click my e-mail address?

  Windows Vista IE9 is is it inserted a way I can set up the so function keys when I click my e-mail address?  THANKS in advance

  See my response here

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-desktop/macro-recording-in-Vista/ef061942-8665-4d27-9222-dcd761936386

• When I installed Windows Vista Ultimate oracle virtualbox has stopped working?

  I use Windows Vista Ultimate ISO in Oracle Virtualbox but when I install Windows Vista Ultimate Edition, Oracle VirtualBox is stopped working,:(, que dois_je faire?) my other operating systems in Oracle Virtualbox is very well.

  Hi Obito,

  The question you posted would be better suited on the Oracle Forums.

  http://www.Oracle.com/technetwork/Server-storage/VirtualBox/community/index.html

  https://www.VirtualBox.org/wiki/community

  Let us know if you have other questions about Windows in the future. We will be happy to help you.

• When activating my windows vista ultimate product, I get the response that the license key is already in use, let me know how to solve this problem?

  When activating my windows vista ultimate product, I get the response that the license key is already in use, let me know how to solve this problem?

  KiranS Hello,

  Judging by your post, it seems that Microsoft had technical problems when you tried to activate your copy of Vista by phone. Have you tried phoning the line Activation again?

  The normal procedure is that if the activation fails through the automated system, the call is transferred to a real person. It is the only available option if you get the error 'use existing product key'.

  I can only suggest that you try again the activation by phone and see what happens.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk |  vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• When I install Windows Vista it gets stuck on the end of the installation.

  I use Dell Inspiron 1720.When I reinstall Windows Vista, it got stuck on the end of the installation.

  Hello

  I ask you why you reinstalled you may have an underlying problem do you stop.

  This is the information of Dell for the use of their recovery partition:

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&l=en&s=Gen&docid=DSN_336966&isLegacy=true

  And here's how to use their recovery disks:

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&CS=19&l=en&s=DHS&docid=DSN_339949&isLegacy=true

  If you have problems with the help of their recovery software, you will need to contact Dell:

  http://support.Dell.com/support/index.aspx?c=us&CS=19&l=en&s=DHS& ~ CK = mn

  Or try the Community Forums:

  http://en.community.Dell.com/support-forums/default.aspx

  See you soon.

• the recovery came with my compaq presario cq60 dx211 disks would work with windows vista home premium. the recovery disk, I was created when I had windows vista home basic.

  Windows Vista Home Basic to home premium compatibility

  the recovery came with my compaq presario cq60 dx211 disks would work with windows vista home premium. the recovery disk, I was created when I had windows vista home basic.

  How is - happen you to Vista Home Premium.  No, they will reinstall Home Basic.