When I click on something, I get like a wave when I scroll down on the internet or something on windows it looks like a wave how to fix? Help, please

Similar Questions

• D600 lag when I scroll down on the web

  I don't know that really where I class, I think it's a software problem. But my D600 accuse by I scroll to the bottom of any web page, no matter what browser I use. I use firefox as a lot of people, but he did it with IE too. I'll give a few examples of it.

  When I press the arrow down on my screen what it comes down to the usual amount, it is supposed to, but it goes like 2 pixels at a time. So instead of being instantly down to the next spot, it'll take a few seconds.

  If I click in the box below the scroll bar, it will do the same thing but at like 10 pixels, maybe that's just purely heinous.

  I don't know what kind of question is this.

  
  

• Everytime I turn on my laptop, I get a warning that the Data Execution Prevention System has stopped working. Any ideas how to fix this, please?

  Running Windows Vista family - that's all as far as I know!

  Hi Norfolk broad,

  Remember to make changes?

  Method 1:  Put the computer to boot and then check if the problem persists

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.
  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

  
  Method 2: if a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  See the link below for more information on the execution prevention (DEP) data
  http://Windows.Microsoft.com/en-us/Windows-Vista/data-execution-prevention-frequently-asked-questions

• Im trying to fill the network so my ps2 connections can use the signal wireless to my laptop running vista Basic. When I click to bridge, I get a message saying that I need at least 2 internet connections. is this in any way about this?

  Im trying to fill the network so my ps2 connections can use the signal wireless to my laptop running vista Basic. When I click to bridge, I get a message saying that I need at least 2 internet connections. is this in any way about this?

  Hi Jer9009,

  Welcome to the Microsoft answers site.

  ·         Could you give the exact error code or error number you get?

  To connect multiple computers, install a network adapter in each and run a network CAT5 cabling to connect each one to a hub (and thus the other.) The computer that will serve as a transition will have a standard network card for wired and a wireless network adapter that will connect to the wireless (WAP) access point or gateway on the second network.

  A network bridge is software or hardware that connects two networks or more so that they can communicate. You can create only a single bridge network on a computer, but a bridge can handle any number of network connections.

  For more information, see the link: create a network bridge:http://windows.microsoft.com/en-US/windows-vista/Create-a-network-bridge

  Add a connection to a network bridge: http://windows.microsoft.com/en-us/windows-vista/Add-a-connection-to-a-network-bridge

  Swathi B - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• In Yahoo Mail, when you compose an email I get a Panel "asking to leave this page. It does not matter that I choose to stay or leave, the Panel will appear again... and again... the only way is to force enough Firefox and start all over... help please...

  In Yahoo Mail, when you compose an email I get a Panel "asking to leave this page. It does not matter that I choose to stay or leave, the Panel will appear again... and again... the only way is to force enough Firefox and start all over... help please...

  Some extensions or toolbars can add such a report.
  
  It can also be part of the code on a page to prevent dataloss if you began to type text (composing a new mail) and you try to close this tab.
  
  You should be able to close this report and close the active tab.

  What I posted above is applicable to all platforms, including Mac.

• internet access - I always get 'pending on the cache' when you try to access the Internet

  Why do I always get 'pending on the cache' when you try to access the internet

  Hi reneamayo,

  1 Windows operating system you are using?

  2. what browser do you use?

  3. If you are using Internet explorer, what version of IE are you using?

  4. When did you start to question?

  If you use IE, then you can try to run the Fixit mentioned in the link below and check:

  Improve performance and security in Internet Explorer

  http://support.Microsoft.com/mats/ie_performance_and_safety/

  You can also check out the following link and try the steps:

  How to remove the contents of the temporary Internet files folder

  http://support.Microsoft.com/kb/260897

  Hope this information is useful.

• When I have access to the internet, I get a page advertisement of Windows Explorer that is empty.

  Original title: Windows Explorer announced.

  When I have access to the internet, I get a page advertisement of Windows Explorer that is empty.  How can I stop this coming?

  I think I found a solution.  A very good actually, if it works.  I opened the adversiment. just a line in the upper part of the screen and goes to unsubscribe.  The line mentioned coupons that I'm not interested.

  He said that it takes several days to unsubscribe, so I don't know if it will work.

• access to the content of the files downloaded from the internet: when I download PDFs from the internet to my documents, they get there but does not open

  When I download PDFs from the internet to my documents, they get there but does not open.

  Download Adobe Reader; Uncheck the box first the Google toolbar:

  http://get.Adobe.com/reader/

  How to set file Associations:

  http://articles.TechRepublic.com.com/5100-10878_11-6172036.html

  How do I... Change file extension associations in Windows Vista?

  See you soon.

  Mick Murphy - Microsoft partner

• I get an error Code 49 when you try to update my applications. I emptied my Temp folder. I have a Mac. Help, please.

  I get an error Code 49 when you try to update my applications. I emptied my Temp folder. I have a Mac. Help, please.

  Hello

  Reference:--

  Open the Temp folder.

  Clear the contents of the Temp folder.

  Disable your Antivirus and firewall computer for awhile.

  Launch Desktop CC and try to download Apps.

  You can also consult the document below.

  Error downloading creative cloud applications

  Hope this helps!

• Content gets over top of my bar Web site when I scroll down

  Hello!

  I've pinned a file svg (black bar) on the upper part of my Web site and the content gets on top of that when I scroll down. Funny, is that sometimes it doesn't work when I'm not

  Tap the bar with the cursor buttons. Also the buttons do not, work when the page scrolls down a bit even if the content is below. The bar is fixed in the master page.

  What I am doing wrong? Nothing works.

  Here is a picture.

  Dropbox - 2014-11-18 15.09.56.png screenshot

  Help, please.

  Make sure that the content of your menu is on a separate top layer on your page/master page content.

• Tecra A2 crashes when you are disconnected from the internet

  We have a customer with a Tecra A2 provided by ourselves that, after 5 months without a problem from time to time, hangs when it is disconnected from the internet.
  Reboot the laptop and the internet can be found sometimes up to 20 times and then it blocks again when we disconnect from the internet IE. A Ref post causing VOIP problems were found and the software disabled and disconnected hardware. No difference. Running XP SP2, IE6, Kaspersky Anti Virus, Tiscali ISP ADSL, modem ADSL Tiscal (a new requested just in case). A lot of work to do and lose valuable time with customer problem.
  Thank you

  Hello

  It seems that a 3rd party software causes this very strange problem.
  You suggested that VOIP is causing the problem. Well, the problem is that Toshiba doesn't support any 3rd party software and applications.
  What I can suggest is to check the Event Viewer logs. You will find all the errors that appear on the OS. Double-click the error and you should see the description of Microsoft.
  Maybe you will find a solution.

  Good luck

• gen64.exe Malware when it is connected to the internet

  My desire to HP dv6-7206tx with Windows 8.1 has a problem when it is connected to the internet. An application named 'gen64.exe' makes the CPU to run at 100%. And Microsoft Security Essentials doesn't pick it up as a malware. I checked on the internet to confirm that it is a malware. Please help me. I have no idea how he broke into my laptop.

  Hello

  There are many programs for cleaning system of malware, adware etc which would suggest Members here.

  I like this one to detect & fixing malware: https://www.malwarebytes.org/mwb-download/

  Update latest version & tick "Scan rootkits" before starting the analysis.

  After the scan, quarantine the detected objects. Restart the system. Yet once, open the Malware Bytes program, go to the history tab in there: remove all quarantined items from there

  Restart the system.

  Open the prompt as administrator, do a SFC SCAN, check if integrity violations are:
  http://www.eightforums.com/tutorials/3047-sfc-scannow-command-run-Windows-8-a.html

  Concerning

  Visruth

• I can't download and install updates to Windows or games on the internet. I get an error saying that I am not on the internet.

  I can't download and install windows update or games on the internet, I get an error saying that I am not on the internet, when I help

  Trinity

  Hello

  1. what operating system do you use?

  2 did you change on your computer?

  3. what version of Internet Explore do you use?

  Method 1:

  If you are using windows 7, I suggest you check in SafeMode with network.

  Advanced, including safe mode startup options

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  Method 2:

  I suggest you of due to windows update, please see the link.

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-installing-updates

  Method 3:

  I also suggest you perform the clean boot and check.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  See also:

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

• computer not automatically standby (formerly titled "impossible computer automatically sleep when it is connected to the internet with modem cable")

  Hi, I noticed recently that my computer (Windows XP Media Center Edition 2005) is unable to sleep automatically when it is connected to the internet with a cable modem. Change the settings for my current power mode and try a different feeding regime (diagrams of Windows XP default power and power management, I created) only solves the problem for 2 days at most. I also tried to change the settings for the other power plans mentioned, and yet once again, the problem was only set for two days at the most. I also tried turning off my computer, restarting my computer, recording Powercfg /Restore Default policies in Run, saving sfc/scannow in Run, and again, I got the same result. Reset and power cycling the modem cable is not helped either. To help you better understand the problem, for example, if I had the date set for the screensaver set to 1 minute, the time for the monitor to turn off set to 2 minutes and time for your computer set to 3 minutes, the screen saver activate after 1 minute, the monitor turns off after 2 minutes, but the computer would not sleep mode after 3 minutes , even after an hour or more. I tried to check the Task Manager, and I have not noticed any process that would be interrupting the day before. However, I noticed that when I turned on the monitor by moving the mouse, even when the computer was unable to sleep and unplugged the ethernet cable from the cable modem and waited, the computer has entered standby as it should have.  I tried to find a solution for more than a week, contributions for this issue would be greatly appreciated. Thank you for taking the time to read my post. (Update: it seems that the problem is something else then my cable modem.)

  Hello

  Thank you for the update.

  This behavior can occur because of possible conflicts of third-party software, which includes the third-party security software.

  You can also temporarily disable third-party security software and firewalls installed on the system and check the issue.

  If disabling the antivirus software solves the problem, you may need to configure the settings of the antivirus as a result program. Please contact the software vendor for assistance in this regard.

  Note: be sure to enable the security software on the computer after checking the issue.

  Note: When you perform a clean boot, you can activate services for the modem, network card and disable third-party services to check the issue.

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• When you transfer files to the internet, the router disconnects from the internet, but the network remains in tact.

  I have a wireless router Belkin g with 1 Server 2003 cable and 2 xp machines and 1 machine vista wireless. My problem is when you transfer files to the internet, the router disconnects from the internet, but the network remains intact. I cannot remote in all computers, but not internet. Once I have restart the router, everything works fine. I was wondering if anyone else has had this problem and how to fix them.

  original title: problems with the router.

  I have no solution for you.  It seems more likely to me that it is a hardware problem - but if it was related to traffic, I would expect that the problem on the downloads more downloads.

  In addition to DSL reports, you could try to ask some of the forums that specialize in the updated firmware for wireless routers.  This is not to say that you need to install the modified firmware (although there may be good reasons to do so), but people who do usually firmware mods are much how the equipment works and what might be its potential failure modes.

  Is one of the best-known sites DD-WRT.com, but there is one list of other here: http://en.wikipedia.org/wiki/List_of_wireless_router_firmware_projects the firmware on these sites was originally designed to run on Modem Linksys WRT54G, but applies generally to Linux with chips Broadcom - based wireless routers and DD - WRT claims that its firmware takes care of some Belkin routers.  If your router is one of those on what DD - WRT will work, there will probably be someone in the forum there will have something for you.  See the list here: http://www.dd-wrt.com/site/support/router-database