When I connect my ti computer internet it is said about another computer has the same IP address, but I bought the authentic version of the garage?

Similar Questions

• My iPAD asks me to update to OS 9.3, but the update fails because it says that the iPAD is not connected to the internet and when I connect to my computer iTunes it say my OS is up to date.  Help, please.

  My iPAD asks me to update to OS 9.3, but the update fails because it says that the iPAD is not connected to the internet and when I connect to my computer iTunes it say my OS is up to date.  Help, please.

  I'm surprised to hear that for an iPad 2 that the issue had apparently been set for 2 s. Please see this for more details as I know them. Maybe the servers at your site have not been updated yet for the new version of the iPad 2.  ???

  Apple released the update iOS 9.3 for older devices (air of iPad and previous iPhone, 5 s and previous) due to problems with Activation. See the following for details and possible solutions.

  http://www.IMore.com/Apple-working-iOS-93-fix-older-iPhone-iPad

  https://support.Apple.com/en-us/HT206203

  A new version for the iPad 2 is now available which does not require the activation step. A new version for other devices is not yet available.

• When I turn on my computer until the start menu is ready before I click on internet, it really takes a lot of time

  When I turn on my computer until the start menu is ready before I click on internet, it really takes a lot of time. Why?

  Hello

  Did you do last changes before the show?

  I would like the season you follow the steps in the link and check if that helps.

  Method 1: Perform a boot clean and chcek if it helps.

  How to configure Windows XP to start in a "clean boot" State

  Note: Once the diagnosis has been made, make sure you try the step to configure Windows to use a Normal startup state in the article in order to reset the computer as usual.
   
  Method 2: You can also check out the link and check if it helps.
  Advanced Troubleshooting for General startup problems in Windows XP

• I get an error when I connect to my computer that says Core Services Shell.exe - Application error

  Original title: shell.exe basic service error

  I get an error when I connect to my computer that says:
  Core Services Shell.exe - Application Error
  The exception unknown software expection (Oxc0000409) occurred in the application at location 0x0b98deaa.

  I have Trend Micro installed and it shows no virus. Any ideas of what could be the cause? It keeps popping up throughout the day.

  Thanks in advance.

  Hello MCL_999,

  Thanks for posting your question on the Microsoft Answers forum!

  From your description, you get a message indicating that Core Services Shell.exe meets an Application error.

  We will try to solve this by using a clean boot.

  Steps to try this are found here:

  How to configure Windows XP to start in a "clean boot" State

  Let us know if that helps.

  Best regards

  Matthew_Ha

• Why did I receive a notice of "temporary profile" when I connect to my computer

  make a "temporary profile" notice when I connect to my computer while I log out of nothing is saved in the Favorites bar

  Hello

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  These problems and similar bugs can help:

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  A temporary profile is loaded after you connect to a Windows Vista-based system
  http://support.Microsoft.com/kb/947242

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  -----------------------------------------------

  Try these to erase corruption in the case where it plays a role.

  1. run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  2. start - type in the search - box COMMAND find top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  3. then run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Other methods:

  Use the hidden administrator account to lower your user account (to the lowest level) APPLY/OK then
  go back and reset it to the Admin APPLY/OK - this clearly allows corruption. Do this several times. Do
  Ditto for the other accounts that may be difficult. Then if necessary you can also reset your
  Passwords in the accounts. Do not forget to leave your Admin account and the other to the
  desired level.

  Make another Admin account with your password and use it to fix the others if necessary. (a little
  to repair with, do not to use regular account, a safety valve) always keep a spare ADMIN account.

  DO NOT LEAVE THE ENABLED LSA OR USE DAILY. If it corrupts you are toast!

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty to a Vista - corrupted user profile
  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• while I connect to my computer with the samsung wave y kies wi - fi computer displays an error as a peripheral denied connection permission, please provide the solution.

  while I connect to my computer with the samsung wave y kies wi - fi computer displays an error as a peripheral denied connection permission, please provide the solution.

  earlier, I used internet and transfer files through this link, but now it is showing the device refused permission. I have checked all the settings, but could not remedy any problem so kindly help me so that I can connect via wifi to my mobile samsung kies.

  Also, I am facing problem in sending files via Bluetooth, and at the same time my mobile can easily transfer the file and the music file actions with my computer via bluetooth which I did not understand.

  Rental offer the solution to both problems. In my computer I have window7 profeessional.

  Marie-Odile THE

  Hello

  1. What is the brand and model of the computer?

  2 have you made any changes to the computer before the show?

  Reinstalling the Kies application and check if it helps.

  See this link:

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  I also suggest you to contact Samsung and check: http://www.samsung.com/us/support/

  Regarding Bluetooth check out these links:
  

  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Bluetooth devices do not work correctly on a computer that is running Windows 7:

  http://support.Microsoft.com/kb/980396

  Also see this link: http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  Note: The article mentioned above is also applicable to Windows 7.

  I hope this helps!

• Error one of the UBS damage connected to this computer has malfunctioned and windows does not recognize it

  Original title: Canon MF 4500 printer inkjet

  My computer tells me that 'one of UBS damage connected to this computer has malfunctioned and windows does not recognize"it could the cable, as the printer (canon MF 4500) does not work.

  Hello

  1. what operating system is installed on your computer?

  2. when exactly you receive this error?

  3. all USB devices work properly on your computer?

  4. have you made changes on the computer before this problem?

  Method 1:

  You can try running the fix - it from the following link.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/

  Method 2:

  You can try to uninstall and reinstall the USB controller. Follow the steps.

  (a) click Start and then click Control Panel.

  (b) click System and Maintenance, click System, and then click Device Manager.

  Note: If Control Panel is in Classic view, double-click System and then click on Device Manager.

  If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  (c) in Device Manager, double-click to expand the "USB Bus controllers", right click on the controller host, click "Uninstall" and click "OK".

  Check that if at all, there is an exclamation point on the pilot, it suggests problems with the installed driver.

  (d) repeat step 2 to uninstall all items under 'USB Bus controllers'.

  Then, restart your computer and Windows will automatically reinstall all USB controllers.

  It will be useful.

• When I turn on my computer and the desktop comes up, I get error Runner "file name (updates from HP.exe) Runner has no... "

  When I turn on my computer and the desktop comes up, I get a Runner error - "doesn't have a Runner (updates from HP.exe) file name '-' (the id separator).»  If I click OK everything continues normally.  What should I do?

  It is an HP with Windows XP computer.

  Hello

   
   
   
  Try to perform the clean boot and check if it helps, here is the link:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353 
   
   
  Note:
   
  How to configure Windows to use a Normal startup state
  After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.
  1. click Start and then click Run .
  2. type msconfig, and then click OK.
  The System Configuration Utility dialog box appears.
  3. click on the general tab, click Normal Startup - load all device drivers and services and then click OK.
  4. When you are prompted, click restart to restart the computer.

• How can I limit the number of connections to my PC for an incoming connection at a time. Multiple users are connected to my computer via the network.

  original title: limit incoming connections

  I want to restrict the number of connections to my pc for an incoming connection at a time.  I have several users that connect to my computer, using the same user name & password.  If someone tries to open a session, they fall out of someone who is already connected, without notice. the only solution I can think of is to limit the number of incoming connections to one.

  Hi willard.

  Your question is more complex that most seem to be on the answers. I suggest that you re-post on our TechNetforums where computer professionals can help you.

  http://social.technet.Microsoft.com/forums/en-us/categories/

  I hope this helps.

• Connection problem: trying to connect to my computer at the title of the administrator, but after I put my login in it goes to check on the page and will not let me connect

  Try to connect to my computer as the administrator, but after I put my login in it goes to check on the page and will not let me connect. The regular connection for the computer works fine.  Any ideas?

  Try a system restore to a Date before the problem began:

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  It is the instance of Vista installation.

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/threads

  Adjust settings, manage user accounts.

  Try the Forum above to repost, if necessary.

  See you soon.

  Mick Murphy - Microsoft partner

• Another computer has the same IP address as mine, how can I change this?

  Another computer has the same IP address as mine, how can I change this?

  Original title: IP address

  Hi John,.

  Please go to the Microsoft Community Forum.

  IP (Internet Protocol) address for the other two computer cannot be the same.

  Internet Protocol (IP) addresses are unique numeric identifiers that are required for each device that connects to the Internet. Them are a common shared resource that must be managed carefully in order to ensure the continued growth and stability of the Internet. Most of the Internet is currently treated with IP version 4 (IPv4) addresses. IPv6 addresses are also in use, but not yet to the same extent. IPv6 is a newer protocol, offering a much larger than IPv4 address pool

  However, you can try to reset TCP/IP on your computer.

  Check out the link provided and check if the problem persists.

  How to reset the Protocol Internet (TCP/IP)

  Keep us updated on the status of the issue.

  In the case where you face problems more when working with Windows keep us updated on the Community Forum Microsoft.

• WARNING: another computer has the same IP address on this computer.

  Original title: another computer has the same IPaddy on this computer. I received your warning. What can I do to stop this?

  I saw a warning you that there is another computer that I have Paddy as this computer (mine). What is that it appeaedn I do to prevent this? Does that mean that someone is on my private etc. messages. ? Thank you. He has appeared in your Windows system event log. Isabel Q. padlock

  Hi Gabriel,

  You can try these steps and see if it helps.

  Step 1:

  You can try to run the network troubleshooter, and see if it helps.

  Windows wireless and wired network connection problems

  Step 2:

  Manually, you can release and renew the IP address of the client as follows:

  a. Click Start and type cmd and right click on cmd and select run as administrator.

  b. type ipconfig/release, and then press ENTER.

  c. type ipconfig / renew and then press ENTER.

  Hope this information is useful.

• I get a popup message on my computer saying that another computer has the same IP address as mine.

  original title: address Ip issues

  What should I do or what it means when a warning is displayed on my laptop saying that this computer has the IP as another device?

  This means that there is another computer/device on your local network with the same IP as your PC. Try to configure your network adapter to use DHCP, or just give it an IP address different yourself... most LANs are minimal and you shouldn't have a hard time to randomly select another IP.

• Windows 2000 update stops at "checking if your computer has the latest version of Windows Update software for use with the site... »

  When I try to update Windows 2000 by using Windows Update, web site crashes the message

  'Check if your computer has the latest version of Windows Update software for use with this web site... The Web site uses ActiveX controls to determine which version of the software your computer is running. "If you see an ActiveX warning, make sure that the control is digitally signed by Microsoft before installing it or allowing him to run.

  Y at - it a fix for this problem?

  This problem may occur in Windows 2000, Windows 2000 SP1 and Windows 2000 SP2 on computers. These versions are no longer compatible with the Windows Update Web site. To resolve this problem, you need to install the latest Service Pack for Windows 2000 computers. Follow the link below to access the article and get with the latest Service Pack.

  http://support.Microsoft.com/kb/260910

  Bobby

• A computer repair shop can install windows on someones computer off a 'set of generic disks' if the computer has the right to this type of windows via a PIN single/code/serialnumber?

  A few years back, I took a computer to a repair shop and had not the discs, the repair guy said that they could legally restore the computer and load it on a wide a copy of a random/generic windows (the same computer had the right of)

  is it legitimate?

  Seems like it would be, I mean if the computer has the right to this title, but I don't know if you're telling me.

  Thank you

  If the Windows license is an OEM license (ie. the computer was purchased from a company like Dell, HP, etc. with pre-installed Windows), then the license is bound to the machine.  Each manufacturer has a way to check their OEM license is valid.  One method is for the manufacturer to place a code in the BIOS of the motherboard that validates the copy of XP, when installed with a floppy disk to install from the same manufacturer.  So it should be perfectly legitimate to restore license OEM to the originating from a floppy to install OEM computer.

  HTH,
  JW