Device Setup - switches and arrays

Similar Questions

• connect with us. Choose a network and go online to complete the device setup

  My laptop installed new updates of windows the other day.  I tried to use my laptop for the first time since updates, and he says, ' Let's get connected. " Choose a network and go online to complete the device setup. "I went to Starbucks, because I have no internet, and he tried but would not connect at all.  I don't know what to do.  I can't use my computer now.  I just need to find another source of internet to try?  (I tried a few other random public networks that did not work and would not connect as well).

  Original title: update problem

  Hello

  Please contact Microsoft Community.

  I understand that you can not choose a network.

  I will definitely help you with this.

  You use a WIFI or Ethernet connection?

  I suggest you go through the steps below:

  Steps: Try to login or to create the new configuration of the connection:

  • Press the window key + R.

  • Type ncpa.cpl and press ENTER.

  • Right-click on the network connection, and then select Enable.

  • If this does not work, then try to new network configuration.

  • Right-click on the network icon in the lower right.

  • Click to open network and sharing Center.

  • Click setup, a new connection or network.

  I hope this helps. Please post back with the State of the question and we will be happy to help you further.

• AirPort Extreme, gigabit Ethernet switch and covering my house

  I have an AirPort Extreme 802.11n to Time Capsule wireless router. I have an old House. It was built in 1852 and microwave ovens have a hard time penetrating through some walls.

  Recently, I made some changes in the House and I wired things for Gigabit Ethernet. I have not yet bought a switch. We have a Mac Pro (cheese grater), a Mac Mini, three iPhones (only 6) and two iPads (one version 3 and the other, only the latter bought autumn, an iPad Air.)

  First of all, since most of us are on 802.11 n, can I initially put in place a heterogeneous system with two routers wireless connected to themselves and to the Internet via a switch? Also, I need two switches; one for the internal LAN and the other for a connection to the Internet? I intend to buy the new ac 802.11 AirPort extreme for a facility in one of the rooms to better cover the rest of the House. I think that both devices will be able to take advantage of the signal of 5 GHz, initially, with another iPad and iPhone to come along the next year. I wouldn't or the other base station being "enslaved" to the other but, rather, connected to the wired network internal and devices just switch between them that move around the House.

  Comments are welcome here. This can be a trip to a Genius Bar if I do not hear from final here.

  can I initially put in place a heterogeneous system with two routers wireless connected to themselves and to the Internet via a switch?

  Possibly, depending on the type of modem you have. See below info in this post.

  Also, I need two switches; one for the internal LAN and the other for a connection to the Internet?

  NO.

  I wouldn't or the other base station being "enslaved" to the other but, rather, connected to the wired network internal and devices just switch between them that move around the House.

  Not sure what you mean here. The two extremes of the airport will be connected to the cable network, so they will be in communication with them at all times. If you want to peripheral switch between them that move around the House... then you will need what is called a "mobile network"... so the two airports will produce a wireless signal that uses the same wireless network name. Apple Setup Assistant will put things this way by default.

  Depending on the type of "modem" you have, the network might look like this:

  Internet > Modem > AirPort Extreme 802.11ac > Ethernet switch > AirPort Extreme

  or, if your "modem" is really a modem/router, also known as, a walkway... then you have the ability to set things up like this:

  Internet > Modem/Router > Switch > the two airports to connect to the Ethernet network

  Looking for a Gigabit Ethernet switch to your network. Switches come in 5 ports, 16 channels, 8 ports, etc. versions.  It's always a good idea to buy an Ethernet switch over a few ports that you think that you may need right now... to allow for expansion.

  The key here is that the type of modem you have will determine how to configure the network.  If you could provide the number of brand and model of your "modem", we can eliminate some of the assumptions to be used at this time.

• OK to mix 'of connection to the switch"and"close relay switch?

  Hi all

  I'm developing a test sequence using the card multiplexer 2527 to the track signals.  To configure the card, I use DAQmx switch functions.  In my application, I have a Subvi routine that imports the data from a spreadsheet Setup and run a loop for to set the configuration for each step (each iteration of the loop contains the channel for 2527 card information).  The topology is set on the first iteration, as well as the configuration of the path to the first string.

  My concern is this: I need to close the extra channels/relays without changing the topology or resetting the device.  In the first round, I use "connection to the switch" function to set the initial path, (ch0 to com0 for example).  Then in subsequent iterations of the loop, I use "Relay close switch" function to close the additional channels individually (for example k2).  In the end, when the measure is taken, both ch0 ch2 must be closed and routed to com0.  This implementation is so sure, or am I somehow to make the adjustments to the initial loop?

  I would like to test this with the hardware, but it is not yet available.

  Also, I realize that I could use independent topology and configure all relays individually for each step, but I hope that my approach will be easier and safer.

  Please notify.  Thank you.

  GSinMN

  Hello GSinMN,

  It's OK to mix 'of connection to the switch"and"Close relay switch"If you understand what's happening below. "Switch Connect" connects two channels by closing a path of relay between the channels, then "Close relay switch" can be used to change the State of the individual relays. If you are not careful you can mess up your connection by activating / deactivating relays that are part of the route connecting your channels.

  "Also, I realize that I could use independent topology and configure all relays individually for each step, but I hope that my approach will be easier and safer."

  I would recommend the topology independent if you want to stick with connections to channels only. http://zone.NI.com/reference/en-XX/help/375472G-01/switch/2527_independent/

  Initial connection:

  CH0-> pcom0

  pcom0plus-> icom0plus

  pcom0minus-> icom0minus

  icom0-> com0

  In each future iteration just connect to the next to pcom0 channel (which will be indirectly connect it to com0):

  CH1-> pcom0

  CH2-> pcom0

  ...

  ...

  Jarrod

• Front Panel Bank of switches and related indicators

  I am the design of a test system.  I would like a Bank of the individual switches on the control panel to turn the test case.  I figured out how to do this.  And I can do banks for the indication LEDs (pass/fail) and the field of digital test result.  But, I want to tie them together.  I guess I should start by using a cluster rather than a table.  But how to get banks to act as a single group?

  As I have so far, I have a back of switches and a Bank of indicators (of the switching status) for all just play.  The indicators do not align with the switches. I'd like a match of 1 to 1 for easy operator use.  When I use 'properties' to develop the Bank of the indicator, it won't take the number.  It is limited internally somehow.

  DH

  How about an array of clusters? Easy to use and easy to watch, all lined up.

  

• Photosmart 8450: "Device Setup doesn't have all the.

  HP dear Forum and Support:

  My HP Photosmart 8450 fails to install on my Dell laptop. Help, please.

  I have a Dell Inspiron 640 m laptop computer with Windows XP. I got the printer installed fine, but then I caught a bad virus had to restore my laptop back to the factory settings and then installed Norton Antivirus.

  First, I downloaded the Driver on the HP site and connected the driver software Installation the file downloaded.

  Then, during Installation, the Installation Wizard told me to connect my printer to the USB Port of my computer, I did.

  Then, after a few minutes, the installation wizard told me that "Device Setup has not finished.'

  Then I tried whole, this time connect my device to a different USB Port in my laptop with the same failed result. In addition, no a HP printer icon appears in the list of printers in my control panel.

  A cause as possible, I can imagine would be if I have Norton Antivirus and Antivirus is blocked somehow, but I highly doubt this possibility, because then it would be a common problem with many users, like HP and Norton products are very common.

  Rakovsky

  P.S. happy holidays.

  OK, I gave you a thumbs up.

  Here's what worked for me:

  I uninstalled the printer from the "Programs" section in my control panel. Then I reinstalled the printer driver. When I did, I have connected my USB pritner when the installation wizard asked. As was happening, he said that the printer has been detected and this may take a few minutes.

  Meanwhile, a message apparently not HP-software popped up because of my operating system, that says hardware is automatically detected by my computer laptop and installed automatically and give me the choice to make my default printer. Of course, rather than interfere with the HP Installation Wizard, I've just left him intact.

  A few minutes later, I got the same old "Not completed" message in my installation wizard. Then I clicked on the operating system pop-up message and told to do my Pritner by default.

  I think that the installation wizard might at this time asked to click Next in the installation wizard, and if that were the case, then I didn't click it. But in any case the next thing the wizard said was that the device had been installed successfully.

  So it's a combination of things that led to the unit being installed successfully.

• I m problem that my computer automatically turns off (is not closed correctly at the time of the switches) and when I start it gives message that windows do not close properly seeded.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Previously I was using WIndow Vista Home Premium but recently I installed Windows Vista Ultimate.I m having problem my computer turns off automatically (is not closed correctly at the time of the switches) and when I start it gives message that windows do not close properly seeded.

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------
  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  information on errors such as STOP and information such as IRQL_NOT_LESS_OR_EQUAL codes or
  PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  Displays information on all the "crash" of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, drivers particularly video drivers but it
  are other causes.

  You can do without if needed fail or the Vista DVD or recovery command prompt mode
  Options if your system was installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• No "ip Routing" command on the switch and still intervlan routing.

  Hello

  In my companies 4500 switch I see there is intervlan routing configured for 4 VLANS there but I don't see any command "ip Routing" on this subject

  to enable routing on the switch. A switch can route the same if the command is not there?

  Ninja,

  Default configuration options often do not appear in "show run".  Please try «performance see all»

  Kind regards

  Christopher

  PS your switch and device business, not small business.

• ASM on HA SAN FC switches and replication

  Hello
  
  We need to install our first CARS, and we do not know how to manage the shared storage with high availability requirement.
  
  For example, we have a SAN HA with two FC - switches and a master - / slave storage configuration - is ASM able to handle this?
  ASM can handle physically separate physical disks (for example two boxes of discs in different rooms) and mirror and intertwining above?
  The drives are of different types: e.g. a disk array and drives normal and grouped?
  Any help is appreciated.
  
  Kind regards
  Monika Anna

  Hi Monika,

  mschnatt wrote:
  Hello

  We need to install our first CARS, and we do not know how to manage the shared storage with high availability requirement.

  For example, we have a SAN HA with two FC - switches and a master - / slave storage configuration - is ASM able to handle this?

  Yes... ASM can manage Luns Avaliable in host.

  ASM can handle physically separate physical disks (for example two boxes of discs in different rooms) and mirror and intertwining above?

  Yes... ASM can do

  The drives are of different types: e.g. a disk array and drives normal and grouped?

  It is not recommended that you have different (size and perfomance) disks on diskgroup even, you can have the serious performance problem.

  See what...
  http://download.Oracle.com/docs/CD/E11882_01/server.112/e16102/asmprepare.htm#BABJHHEC

  Kind regards
  Levi Pereira
  Mark responses replied 'useful' response or 'correct' answer which will help others with the same problem.
  
  Thank you for doing your part to make this community as valuable as possible for everyone!
  

• Updating FF 24/25, my browser hang, I uninstall the browser and tried to reinstall, but extract the Setup file and blocks until pls give a solution

  Updating FF 24/25, my browser hang, I uninstall the browser and tried to reinstall, but extract the Setup file and blocks until pls give a solution

  I solved the problem, installed the installer from mode Windows safe.

• How can I get my account number of the device Apple Watch and iPhone 5?

  How can I get my account number of the device Apple Watch and iPhone 5?

  Try this below - it can help you!

  In the Apple Watch app on the iPhone, under My Watch > booklet & Apple pay > [your specific credit card]

• Details of the 536304-001 HP Power On / Off switch and cable LED Assembly for the Z400

  Can someone help me with the P5 front header pinout on the motherboard Z400 or on the HP 536304-001 power switch and LED to the Z400 Cable Assembly?   I'm getting to is a Z400 motherboard in a case of XW8000. I know that 536304-001 does not fit in the case of XW8000 but the XW8000 part equivalent seems to have mostly the same connections. double color led, led hard drive, power button / stop.   I can see an illustration that 536304-001 use 4 connections on the side to key of header and 2 on the other. Cable colors are red, green, black and 3 white. There are also other connections to the temperature thermistor that I would not intend to use (unless explicitly required for Z400 motherboard).

  Here's a panel header pinout before Z400 P5 motherboard:

  

  Find "missing" pin key 14 to steer this diagram properly.

  Pins 2 and 4 go to the power LED.  This LED is two-way, with green in a sense (normal) and Red (diagnosis failure) in the other.  If the LEDs back to back are installed between pins 2 and 4, on lights.  If green it does not illuminate during normal operation, move the pins to the pair of diodes.

  Pins at 15, 17 and 18 are chassis ID pins.  It's OK to let those pins unconnected.

  Pins 6 and 8 are the power button pins.  Connect a normally open push switch between pins 6 and 8.  Do not attach any tension or Chin-ups to this switch.

  RESET # may not work, but it is a prototye signal.  A switch push-button normally open between pin 7 and 6 (GND) could make it work.  It's OK to let those pins unconnected.

  Terminals 11 and 12 are the thermal diode in the panel cable Assembly before Z400.  The system starts without the thermal diode, but fans can operate at full speed all the time, or may oscillate in speed (several times to go from slow to high-speed and back).  This will make the system very noisy.

• can someone give me links to download only setup.exe and autorun.exe to the tribes of heroes 5 of the game is that mine are corrupted and I can't download the whole game again?

  can someone give me links to download only setup.exe and autorun.exe to the tribes of heroes 5 of the game is that mine are corrupted and I can't download the whole game again?

  This is the incorrect forum for your question.

  Try using Bing or Google, like this

  http://www.bing.com/search?q=Heroes+5+tribes+of+the+East&form=OSDSRC

• The hand left panel doen't show the usual "Control Panel Home" switch and my control panel display is stuck on the classic view.

  The same thing happened to me recently: the hand left panel doen't show the usual "Control Panel Home" switch and my control panel display is stuck on the classic view. Click on "Show common tasks in folder" but that doesn't change anything. Finally, I tried a restore without success point. No idea how to get back the link "control Panel Home"?

  Thank you very much for your support

  Alain Truchat

  Split from here:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-desktop/left-hand-pane-on-Control-Panel-missing-XP-Home/6ca7e184-e2be-4709-b865-81e5c3702629#last

  Hi, Alan.

  Reset Control Panel-
   
  Press Windows key + R
   
  Type inetcpl.cpl regsvr32.exe/n/i
   
  Press ok

• would like to see device cdrom0 UNC: and \\.\cdrom0$ and \\.\cdrom0:

  Currently, you can access c: as \\.\c: or \\.\c$ and also as \\.\PhysicalDrive0 (for example, physical drive range for any given drive letter) if I remember correctly.

  HOWEVER, it has no such feature UNC paths for the readers of cdrom/dvd burner.

  I'd like to see some actions or the UNC paths for this and/or the naming conventions in windows player. and since there may be multiple drives in a machine, I would like to see the numbers starting with 0 (zero).
  for example,.
  CDROM0: or \\.\CDROM0$ or \\.\CDROM0:

  If microsoft would implement it, it would simplify things with regard to the content of the web pages on cdrom!
  because then you could do stuff like autorun
  [AutoRun]
  Open = iexplore.exe file:///CDROM0:/index.htm

  THIS will be possible. Currently, IE8 mangles it as http://index.htm/ which is completely false.

  and by the way, autorun shellexecute = no longer works. It should be. It would be preferable instead of the above because it uses the default browser:

  [AutoRun]
  UseAutoPlay = 1
  ShellExecute = index.htm

  What would be REALLY interesting - is if it were in writing...

  It has support for this.  In the document:

  "Give names of files, paths, and namespaces.
   <>http://msdn.Microsoft.com/en-us/library/Windows/desktop/aa365247(v=vs.85).aspx >

  He states:
   
  Another example of the use of the Win32 device namespace using the CreateFile function with "\\.\PhysicalDiskX" (where X is a valid integer value) or "\\.\CdRomX". This allows you to directly access these devices without going through the file system. This works because these device names are created by the system, as these devices are listed, and some drivers will also create other aliases in the system. For example, the device driver that implements the name "C:\". "have its own namespace which is also be the file system
   

  Indeed, when I put a CD in my drive, I can open a command prompt window (start-> Run-> "cmd") and enter the command:
  dir \\.\CdRom0\\*.*
  and it will return the list of files in the root directory of my CD player level.

  HTH,
  JW