When I start the first laptop computer, the machine should enter me the code, why?

Similar Questions

• When I start the computer, sometimes the icon in the taskbar indicates that it is connected to a network that is not identified. I wait a few minutes until what he says at last he is identified & seems to work very well.

  Original title: Internet wireless connection

  I use a PC & a cable modem wireless to connect to the Internet.  When I start the computer, sometimes the icon in the taskbar indicates that it is connected to a network that is not identified.  I wait a few minutes until what he says at last he is identified & seems to work very well.  The only other issue I see is once in a while after it is connected, I noticed that it is to identify the network connection, but I see no problem to surf the web.  This could be a looming problem with the modem, or is it something else?  Should I consider it as my modem is still under warranty?  ARRIS / Motorola wants to charge a diagnostic fee is why I write on this forum first.

  Thank you

  [Transferred from Internet Explorer]

  Roll up your sleeves & cross your fingers...

  ACTIONS:

  [You can print these instructions for reference offline. DON'T SKIP ANY STEP! [If a step said to restart, restart!]

  1. click right on the link following, select SAVE TARGET as.... & download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  1. right click on the following link, select SAVE TARGET as... & download the McAfee consumer products removal tool, save it to your desktop: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. right click on the file that you saved in step # 1 above and select run as administrator to run the Norton utility. DO TAP not your keyboard until the race ends, then restart.

  3B. right-click on the file that you saved in step # 1 b above and select run as administrator to run the McAfee utility. DO TAP not your keyboard until the race ends, then reboot again.

  4. right-click on the following link and SAVE the download to your desktop: http://iefaq.info/attachments/133/ie8-rereg.zip [1]

  Note: Good for IE9, too.

  4B. right click on the file downloaded in # 4 above has (that is, ie8 - rereg.zip) and EXTRACT its contents to the desktop. This will create a new folder on your desktop namedie8-rereg.

  4 c. close all open applications (that is, anything with an icon on the task bar), open the new folder created in # 4 b above, double-click on the file ie8 - rereg.cmd to run the script and restart.

  5 reaffirm Internet Explorer as the browser in the default CUSTOM (<>) Set Program Access and defaults of the computerarticle. [2]

  6. reset Internet Explorer according to the instructions on this page: http://windows.microsoft.com/en-us/internet-explorer/reset-ie-settings

  Note => for best results, check the option Remove personal settings .

  7. open Internet Explorer (only!) to http://windows.microsoft.com/en-us/windows-vista/windows-update-error-8000ffff [ignore the title & symptoms].

  8 b. ignorant of the "not recommended" or similar warnings, run the difficulty (50202 #) DEFAULT modes and AGGRESSIVE. [3]

  9 restart once again & test.

  10. in response to this post with a status report.

  ==================================================
  [1] source: http://iefaq.info/index.php?action=artikel&cat=42&id=133&artlang=en

  [2] after that we ended up this thread, do not hesitate to reaffirm one of your other default browsers.

  [3] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

• I get "Can'tOpenLogFileException ' when I start the computer

  When I start the computer, I get the following: path to the file Can'tOpenLogFile Exception: newspaper: C:\ProgramData\Juno\Accelerator\MainException.log,open mode: 10 to WinMain(.\main.cpp:170) caused by: failure of fopen with errno ErrnoException:Call (2) "no such file or directory"

  When I try to open Juno he opens not and said that Juno detected error then the next screen is a Windows form that says "Juno has stopped working.  A problem caused the blocking of the work programme...
  I need to open the Juno - Please HELP!  Relocation of Juno changes nothing!

  I uninstall Juno and then reinstall again - maybe that will create the appropriate links and do work (it cannot be initially installed correctly) - don't reinstall it just (uninstall first).

  If this does not work, please transfer your question in the Forum program: http://social.answers.microsoft.com/Forums/en-US/vistaprograms/threads where people who specialize in programs that are not Vista or IE will be more than happy to help you with your problem.

  Good luck! Lorien - a - MCSE/MCSA/network + / A +.

• When you start the computer, the error: "year error occurred in the program during the initialization of the error Code 0 x 80070002.

  Buy HP Pavilion with Windows 7 64 bit.  Migrate some applications and files of old laptop computer with Vista 32-bit.  Most applications migrated work but when I start the new computer, still get this error message: "year error occurred in the program during the initialization of the error Code 0 x 80070002. Once I close the error message box, applications seem to work.  What is a real problem or just a nuisance, I can't ignore?

  original title: Error Code 0 x 80070002

  Hello

  I suggest to start the computer in safe mode and check if the problem persists.

  Start your computer in safe mode:

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  If the problem does not occur in safe mode, and then perform a clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Perform step 7 to put the computer to a normal startup.

• I get the following popup when I start my Acer laptop with Windows 7 - Microsoft dynamic C++ Debug Library...

  I get the following popup when I start my Acer laptop
  with Windows 7 and I use Google Chrome as My browser - I would like to know how to
  it stop what happens when windows starts. -Thank you--->
  Dynamic Microsoft C++ Debug Library
  program: C:\Windows\system32\igfxsrvc.exe
  File: D\Program Files\Microsoft Visual Studio
  9.0\VC\ATLMFC\INCLUDE\atlcom.h
  Online: 2475
  Expression: 0 & "communiqué called on a pointer that has.
  already been released.
  For more information on how your program can cause a
  the assertion failure, see the Visual C++ documentation on
  argues.
  (Press Retry to debug the application)
  Choice to follow:<--Not seen="">
  Abort Retry Ignore

  Hi Chris,

  This problem may occur because of the conflict between certain third-party applications.

  We will start the computer Safe Mode to check if the problem occurs in Mode without failure. If the problem does not occur in Mode safe, then you can try to set up your computer in a clean boot state to find what startup item or service is causing the problem.

  Step 1:
  To restart in Safe Mode, see the link.

  Startup options (including safe mode)

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  If the problem does not occur in Mode without failure, then you try to put the computer in a clean boot state.

  Step 2:
  To perform Clean boot follow the procedure below.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow the "How to reset the computer to start as usual after a clean boot troubleshooting" section in the link provided to return the computer to a Normal startup mode.

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• How to make a virtual computer to connect to a CD player with an ISO mounted when you start the virtual machine?

  I am the creation of virtual machines using PowerCLI 5.5 on vSphere 5.0; and while the virtual machine is turned off, I am able to mount an ISO on a CD player and change the boot order to boot from the CD-ROM (for another post).  I have the flag startConnected set to true, but am not having much luck getting the virtual machine to connect to the CDDrive

  $cdObj = $Vm | New-CDDrive - IsoPath $isoPathName - StartConnected: $true

  If ($cdObj - no $null)
  {
  #Power off VM if it is on
  $VmState = $Vm.PowerState
  
  If ($VmState - eq "Receptor")
  {
  $Vm | Stop-Vm-confirm: $false - ea 0
  }

  $BootHardDiskName = 'disk 1 '.
  $VmView = get - VM $VmName - Server $serverObj.Name | Get-View
  $HardDiskDeviceKey = ($VmView.Config.Hardware.Device |) Where-Object {$_.} DeviceInfo.Label - eq $BootHardDiskName}). Key

  $BootableHardDisk = new-Object - TypeName VMware.Vim.VirtualMachineBootOptionsBootableDiskDevice - property @{'DeviceKey' = $HardDiskDeviceKey}
  $BootableCDRom = new-Object-Type VMware.Vim.VirtualMachineBootOptionsBootableCdromDevice
  
  #Set for CDRom boot order
  $BootIso = new-Object VMware.Vim .VirtualMachineConfigSpec - property @ {}
  "BootOptions' = New-Object VMware.Vim.VirtualMachineBootOptions - property @ {}
  BootOrder = $BootableCDRom
  }
  }
  
  #Set VM from the start settings at the start of the first CD and forces the display to update (sometimes delayed)
  $VmView.ReconfigVM_Task ($BootIso) | out-null
  $VmView.UpdateViewData ("Config.BootOptions.BootOrder")
  
  #Power on VM
  $Vm | Start-VM-confirm: $false - ea - global 0EV: vmOpsError | out-null

  When I start the VM, it does start the ISO.

  If I go to vCenter, the CD is pointing to the ISO file, but the 'Connected' to change settings option is not checked;  I can restart the VM of vCenter and then the VM restarts the ISO, but not in the script.

  I even put code to add a lead time of 5 to 10 seconds; I restart the virtual machine twice in the script and I can't CD to connect to start the virtual computer.

  Appreciate any suggestions.

  Maureen

  Have you tried to do a

  Game-CDDrive - CD $cdObj - connected - confirm: $false

  immediately after the start-VM?

• We went to MacOS Sierra of El Capitan and now have to log in twice, when we start the computer.

  We have upgraded to Mac OS Sierra of El Capitan, and now we have to log in twice, when we start the computer.

  How fix us this?

  Thank you...

  All the best...

  God bless...

  If you have activated the preferences-> Security-> FileVault system, then you must enter your password initially so that device drivers can decrypt your encrypted drive.  Once the system is running, you must then log into your account.

  They are really 2 separate activities that happen just to use the same password.

• When I start the computer, my computer opens with a music (sound) very short and when I stopped, it closes with a short, loud music, causing disturbances to third parties. How to remove this noise?

  When I start the computer, my computer opens with a music (sound) very short and when I stopped, it closes with a short, loud music, causing disturbances to third parties. How to remove this noise?

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?

  Step 1: Search for the issue in the clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  a. Click Start and then click Run.
  b. type msconfigand click OK.

  The System Configuration Utility dialog box appears.

  c. click on the general tab, click Normal Startup - load all services and device drivers and then click OK.
  d. When you are prompted, click on restart to restart the computer.

  Step 2: Change or disable startup Windows and exit Windows sound and check.

  a. click Start, click Run, type mmsys.cpland then click OK.
  b. click the sounds tab.
  c. under program events, click Start.
  d. in the sounds box, click (none), or different sound, and then click OK.
  e. click exit Windows.
  f. in the sounds box, click (none), or different sound, and then click OK.

• How to stop the pop-up for saving files when I start the computer?

  I was going to save files on a drive of DVD-CD-R, but I decided to do not, how can I stop the pop-up for saving files when I start the computer? It keeps appearing even though I cancelled check?

  * original title - cancel recording of dvd/cd-rw *.

  Hello

  Windows displays a temporary storage area where files are held before they are copied to the CD. Files or folders located in the temporary storage area are listed under files ready to be written on the CD.

  Try the steps and check them off below if it helps:

  a. double-click my computer and then double-click the CD burner.

  b. under CD writing tasks, click on delete temporary files.

  When you delete the contents of the temporary storage area, you can set this field to another set of files and folders that you want to copy to the CD. The files are not deleted from their location on your computer or on the CD.

• Windows Mail Msg box pop up when I start the laptop

  Hello:

  I am running Windows Vista 32 bit Home Premium on a laptop of HP dv6500z.

  I have access to my email via a web-based e-mail system.

  I do not download e-mail messages from the e-mail system on the Web for an e-mail program
  (for example, Outlook, Outlook Express,...) on the laptop.

  A few months ago, I started having a pop up dialog box when I start the laptop.

  The dialog box is a Windows Mail message box, which leaves think I have "compact the message store" (or archive messages).

  I do not use Windows Mail, so why as I get this message?

  Should I be "compact the message store?  If so, why? ... since I do not use Windows Mail.

  How can I prevent this popup dialog box when I start the laptop?

  Thank you...

  DaleB

  Hello:

  I am running Windows Vista 32 bit Home Premium on a laptop of HP dv6500z.

  I have access to my email via a web-based e-mail system.

  I do not download e-mail messages from the e-mail system on the Web for an e-mail program
  (for example, Outlook, Outlook Express,...) on the laptop.

  A few months ago, I started having a pop up dialog box when I start the laptop.

  The dialog box is a Windows Mail message box, which leaves think I have "compact the message store" (or archive messages).

  I do not use Windows Mail, so why as I get this message?

  Should I be "compact the message store?  If so, why? ... since I do not use Windows Mail.

  How can I prevent this popup dialog box when I start the laptop?

  There is a bug that has this pop-up message in Outlook Express, the same when you're not using it, but I've never heard of what happens in Windows Mail.

  This saint, especially as you don't use Winmail, it won't hurt a thing to click OK and accept the compaction. If the problem arises in the future, open WinMail and in tools | Options | Advanced | Maintenance, uncheck the box for compact the database on shutdown every xx runs.

  Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• When I start the computer began logging directly to my account rather than offer the choice of which account to connect to

  I have two users put in place. When I start the computer began logging directly to my account rather than offer the choice of which account to connect to

  Hello GEOFFMUGGLETON,

  This thread has been created in the discussion forum. and performance of Windows Vista Microsoft moderation team has moved this thread to the security, privacy and user accounts Forum.

• When I start the system upward, it goes to my logon screen and the computer crashes

  I have a windows vista computer and when I start the SUST until it goes to my login screen, I connect the Welcome screen comes the computer hangs... I do a control-Alt - Delete that returns the desk top

  When you get on the desktop, open the start menu to search msconfig and press ENTER.

  When the popup window appears, it should start under the general tab, and you should see normal startup. For now, set it to start diagnosis, press ok and restart the computer. If it still crashes, then replace the and set it back to normal startup, as something else is causing this problem.

  If she does not hang, and then back up the, set back to normal and this time go to the Startup tab. The list is all the things that are set to start when you start your computer. One of them is causing the computer to crash.

  If you have an idea that it might be that you can deselect it, apply, then reboot and see if it still crashes. Or you could just go in the list, one at the same time turn them off then restart suspended far, so you know which is the cause.

• Since then, when I start the computer, it goes through a few stages starting and then ends with a black screen with a cursor flashing at the top.

  I left by mistake a USB in the port when I restarted my computer (Windows 7).

  Since then, when I start the computer, it goes through a few stages starting and then ends with a black screen with a cursor flashing at the top.

  If I press ESC during startup and access the start menu, something marked WED... is highlighted and I press on enter and it starts normally.

  How can I get Windows 7 to do a normal boot without having to access the Boot Menu each time?

  Thank you.

  Tried that, but it did not work.  Finally got and IT guy come and it took him 3 1/2 hours to repair.

  Need a bootable floppy which has then repairs itself.

  Lesson learned.  Have an available for each computer startup disk.

• The CPU usage goes up to 50-60% right when I start the computer.

  Original title: high CPU usage

  I have a pc with windows 7 64-bit, 4 GB ram, AMD Phenom II x 2 511 processor and a Nvidia Geforce Gtx 260. The CPU usage goes up to 50-60% right when I start the computer. I ran the Task Manager and there is no program using the cpu. It has nothing to do with anny viruses because I scanned the computer with two different programs. We do not have Steam and the EA download manager. What could be the problem?

  "Idle" means "doing nothing."  Windows runs the "System Idle" process when the processor has no useful to perform tasks.

  Look at the status bar at the bottom of the Task Manager and you will see that the CPU usage does NOT include the percentage for the System Idle process.

  What are the processes other than Idle System added up to 50-60%?

  I suggest that you run an online scan using antivirus ESET online--> http://www.eset.com/us/online-scanner/

  and then download, install, update and run the free MalwareBytes AntiMalware--> https://www.malwarebytes.org/ version

  I expect that the MalwareBytes Installer is clean enough, but you should pay attention when installing any software to make sure that you accept all of the pre-selected options to install other bundled applications.

• Hi, I have 0xc0000142 error when I start the first pro after the last update, before that I had no problem playing first pro...!

  Hi, I have 0xc0000142 error when I start the first pro after the last update, before that I had no problem playing first pro...!

  Hello Gene,

  You may need to check this: Re: Premiere Pro 2015 won't open after the recent update

  Kind regards

  Navdeep Pandey

• Creative cloud is grayed out when I start the computer...

  I'm on Mac. When I start the computer CC is grayed out in the menu bar above. So Typekit fonts are recognized when opening an Indesign document, then I have to go manually connect to CC.

  I thought that CC was just automatically started and total boot time? I didn't used to have this problem. Please notify.

  Please see Creative Cloud App and Sync fonts