When I try to copy my files get error 0xc000009c

Similar Questions

• In XP, when you try to open a file, getting error 216

  Dear Sir.

  every time I open a file, I find runtime error 216. Please help me to remove this error.
  Best regards

  http://support.Microsoft.com/kb/259279

• When I try to copy a file to an external device using Windows Explorer I get the following error message: "cannot copy. The directory or file cannot be created. »

  original title: could not copy files

  When I try to copy a file to an external device using Windows Explorer I get the following error message: "cannot copy.  The directory or file cannot be created. "I understand that I may have the physical limit of USB keys for the root directory.  How can I fix it?

  Hi GloriaZF,

  What is the size of your external hard drive and what is the available free space? Open my computer-> right click on the external hard drive-> properties. You will not be able to copy more data if the disk is full, or who have less space compared to the size of the file you are trying to copy.

  You need to remove the order data to make the space more. Deleted data from the device USB will be permanently deleted and will not be stored in your Inbox, so take care while eliminating unnecessary data.

  I hope this helps.

• When I try to copy the files from Windows Mail on Vista on a USB key I get the message "you are about to copy this file without its properties

  I move the file from my old PC which took place with Vista on a new computer running with Win 10 where I have Windows Live Mail is installed.  When I try to copy the files from Windows Mail on Vista on a USB key I get the message "you are about to copy this file without its properties".  After studying this issue on the forums, a proposed solution was to reformat the drive in NTFS format, I did.  This does not solve the problem.  Any suggestions?  Would it be OK in this case to ignore the message and copy the file without its properties?

  Well data files/user of vista should work. Yes a NTFS format is good, go to run, or cmd, type:

  diskmgmt.msc in msc, R.click on the material, delete the partition, create one, format. Use the default settings,

  Once thru, L.click the disk, go to actions, all, select 'enable '.

  In addition, live windows for vista is microsoft discontinud

• Micro adapter USB keeps disconnecting when I try to copy the files.

  1 messages
   
   
  Micro adapter USB keeps disconnecting when I try to copy the files.

  Hello

  I have a Micro SD card reader, when I insert my memory card into the reader, he comes and stays there until I try to transfer files to the memory card, or if I run a h2testw test it disconnects.

  Its getting boring, I bought another card reader, but the same problem persists. I tried the drive in my computer and it seems to have worked here, but just on my laptop, I'm having problems.

  Any help will be appreciated, thanks in advance!

  Hello

  1 did you change on your computer?

  2 did you receive an error message?

  I suggest you to check with the other USB port.

  Method 1:

  Tips for solving common driver problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

  Method 2:

  I suggest you to remove and reinstall all USB controllers

  To remove and reinstall all USB controllers, follow these steps:

  (a) click Start, click Run, type sysdm.cpl in the Open box, and then click OK.

  (b) click on the Hardware tab.

  (c) click the Device Manager button.

  (d) expand Bus USB controllers.

  (e) right click on each device under the Bus USB controllers node and then click on uninstall to remove them one at a time.

  (f) restart the computer and reinstall the USB controllers.

  (g) connect the removable USB storage device and perform a test to ensure that the problem is solved.

• Robocopy hangs when you try to copy a file which in use

  Hello

  I find that Robocopy hangs when you try to copy the file using, for example an Outlook .pst file. The behavior of Vista was not to copy the file according to the retry and wait switches from command line, which allowed the backup race move to the next file and finally finish. With Windows 7 the Robocopy session is suspended and resumes ever, even if the file she is trying to copy is closed.

  Is this behavior under Robocopy in Windows 7? Is it possible to get Robocopy to move to the file according to when he's trying to copy a file that is in use?

  Thank you

  Jason.

  "There is no need of me a pause in my script"-Yes, I understand [and should have done before].

  I just tested a network for the first time operation.  It hangs forever as your done even after I closed Outlook & waited for the w: 30 I put.  {I also ran with closed Outlook the first time just to make sure that the network itself had no problems}

  I read that you have provided the link.  This suggests that there is no solution.

  - - - - - - -

  You seem to be doing a lot more & probably more structured than mine operation, this workaround might not be of any use to you.  The other open files issue concerns a simple hourly backup of my kernel files that includes pst files.

  1 I xcopy all the files in a folder internal InterimBackup first.  Can I use XCopy or RoboCopy to send InterimBackup to the real destination.

  2 If Outlook is open then it will copy on InterimBackup and, if the previous Outlook.pst is still in InterimBackup she gets deleted by the attempt of xcopy.  [conclusion - XCopy verifies the existence of the replacement of a file, deletes it and only then discovered that the source file is locked and cannot be copied.]

  So I precede this with

  0 I run [if exists] copy D:\InterimBackup\Outlook.pst to D:\InterimBackup\Outlook2.pst

  The result is that whole process always ends but it only includes the last Outlook.pst that was available.  So I always make a point of Outlook to quit at some point during the day so that he could take part in this backup.

  If you have also tried this as a two part operation, your xcopy / robocopy in the folder InterimBackup would always succeed but would include only Outlook.pst if you had first closed the application.  Subsequent operation of RoboCopy would always succeed with the same possible omission.

  The downside of this might not suit your overall goal.  You'd have to RoboCopy separately all your others folder trees but keep the Outlook.pst in a tree that has not been included.  You could do this either by restructuring of your data or using RoboCopy exclude switches for the file Outlook.pst file.

  You have to accept that you might not be sure about the last time that the Outlook file had been included unless you had deliberately run the RoboCopy closing.

  I have reviewed this improvement by using Task Scheduler to respond in the event of closing Outlook and use it to initiate the copy outlook.pst to InterimBackup, then by running the part of the main operation on RoboCopy to this folder.  But my needs are so simple that I've never felt it's the logs of the events that I would have to put in place.

  As I say, it may not meet your needs.

• Windows Explorer crashes when you try to copy a file

  Win xp Pro

  When you try to copy a file using windows Explorer, the application crashes. I tried to use select times of right mouse and select menu with the same results.

  All solutions short of re - install XP

  Win xp Pro

  When you try to copy a file using windows Explorer, the application crashes. I tried to use select times of right mouse and select menu with the same results.

  All solutions short of re - install XP

  This happens with any file or a particular file?

  Have you tried the copy command from a command prompt window (start > run > cmd > OK)?

  For the full syntax of the copy command, see http://technet.microsoft.com/en-us/library/bb490886.aspx

• When I try to copy a file it displays an error message

  The message error "unable to copy the parameter is incorrect."
  The file is a crack of a game file.
  Why is this? and how do I solve this problem?

  Hello

  1. is the question that is specific to a particular file?

  2. is the file on a disk (CD/DVD) or on the hard drive?

  3 did you changes to the computer, before the show?

  Method 1:

  Right-click on the file and select Rename. Now search for the question.

  Method 2:

  Try to copy the file using the command prompt and check.

  a. Click Start, click principally made programs, click Accessories, right-click on command prompt and select run as administrator.

  b. type in the following command, and press ENTER.

  Copy

  http://TechNet.Microsoft.com/en-us/library/bb490886.aspx

• When I try to install SP1 I get error "an internal error has occurred in the installation of the service pack".

  Original title: Windows Vista SP1

  Hello

  I brought an old computer home from work, and it is in Vista, but he needs service packs 1 and 2.

  When I try to install SP1 I get the following message: -.

  An internal error occurred during the installation of the service pack

  Error 0x800B0100

  http://go.Microsoft.com/fwlink/LinkId=101139

  Can anyone help?

  Thank you

  Bob

  Hello

  You don't say how you try to install SP1

  Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.

  It will also tell you which SP you have installed.

  Then, choose the download of 'bit' OK to use to install Service Packs, installation of SP1 first if it is not already installed.

  Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30

  Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299

  Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468

  Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

  This Information Microsoft can help you resolve problems that you encounter during the installation of Service Packs for Vista.

  http://support.Microsoft.com/kb/947366

  ______________________________________________

  And please read this too.

  http://www.Vistax64.com/Vista-General/187922-Vista-SP1-0x800b0100-error-fix.html

  See you soon.

• When you try to copy a file 'trust' in Vista, get the message 'Copy as administrator'

  I have a computer with Windows Vista Home Premium (32 bit), in which I am an administrator on the computer. I have a file that is "safe" and requires administrator permission to open. Since I am an administrator, I was able to open the file. But when I tried to cut or copy the file, a message appears that I need administrator permissions to open it! Similarly, some programs that create other files (images, for example) must be open as follows so that you can actually save a picture: right click > run as administrator . If you do not open the program in this way, access is denied when you try to save a picture. But back to my account. Like programs, is it possible that I can 'copy as administrator' or 'cut as administrator'?

  I discovered how to copy and paste files using a single command line. Unfortunately, you can't copy the files, not folders. Here's how to copy a file:

  1. Open command prompt
  2. type "copy" without the "sign, while simple letters
  3. press the SPACEBAR once
  4 type the location of the file you want to copy (for example: C:\Users\default_user\file.txt)
  5. press the space bar once more
  6. type in the destination that you want to copy the file (for example: Folder\destination C:\New folder)
  7. press enter and your file should be copied.

• Trying to create a bootable Windows 7 x 64 Flash drive. Get the "invalid MS-DOS function" error message when you try to copy the file 'bootsect.exe.mui' of the Windows ISO on Flash drive

  The title pretty much everything said.  I have an installer the ISO of Windows 7 Professional x 64.  I am trying to create a bootable flash drive using these instructions:

  http://www.OSNews.com/story/20795/Installing_Windows_7_on_the_Aspire_One_or_Any_Other_Netbook

  I followed all the steps in the guide without problem.  Windows Explorer shows the drive is NTFS.  I can copy all other files of ISO on the FlashDrive without problem.  Only, I can't copy this file.  I tried to copy it to my hard drive rather than on the flash drive, and it still does not work.

  I tried to create a file with the same name by using Notepad to see if there was a problem with the file name.  I can copy this file on my hard drive flash drive, but I can't always copy the ISO file.

  I am running Windows 7 Home Premium x 64 edition and using a Corsair Flash Voyager 16 GB flash drive.

  Help, please!

  Download Windows 7 USB/DVD tool
  http://store.Microsoft.com/help/ISO-tool

  Create a bootable USB:
  http://www.victorchen.info/create-a-bootable-USB-memory-stick/

  Install Windows 7 from USB drive/key
  http://www.MaximumPC.com/article/HOWTOs/how_to_install_windows_7_beta_a_usb_key
  http://www.windowsvalley.com/blog/install-Windows-Vista-and-Windows-7-using-bootable-USB-storage-device/
  http://www.intowindows.com/how-to-install-Windows-7vista-from-USB-drive-detailed-100-working-Guide/
  http://TechNet.Microsoft.com/en-us/magazine/dd535816.aspx

  How to install Windows 7 from a USB drive without Windows 7 ISO DVD
  http://www.Blogsdna.com/2016/how-to-install-Windows-7-from-USB-drive-without-Windows-7-ISO-DVD.htm

  How to install Windows 7 from a Flash drive with XP or Vista:
  http://www.legitreviews.com/article/1031/2/

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• 0 x error 80004005 When you try to copy a file

  I try to move items to a file that I downloaded and unpacked.  Whenever I try to copy and paste it into another file I get the error 0 x 80004005.  I am running vista Home premium with Service Pack 2 installed.  I have a feeling that something is wrong with the unzipped file, but I don't know how to fix it.
  Thanx

  Rather than copy / paste should you be import or export this data?

  I ask the question after a very quick glance at these kinds of links.

  http://www.google.com/search?q=copy+a+.xmp+file+to+Adobe%5CCameraRaw%5CSettings&sourceid=ie7&rls=com.microsoft:-to the: IE-SearchBox & oe and ie ==.

• When I try to open Word 2010, get error "this file has no program associated with it for performing this action. Create an association in the control panel to set Associations "."

  When I try to open Microsoft Word 2010, I get the error: the file, try opening is c:\program files (x 86) Microsoft Office\Office14\WINWORD. EXE.

  When I check my file associations, there is no winword.exe to associate it with Microsoft Word.

  Any suggestions?

  Thank you

  Please see the thread similar to the following for a solution:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-files/this-file-does-not-have-a-program-associated-with/1dd8f34f-67aa-43CE-af0c-50387c5431a6

• Photos are get recorded in the Games folder and when I try to access it, I get error "file name or extension is long."

  Original title: filename or extensions East of long

  "" I don't know how but all my pictures are gone to my save game file and now I have to click a whole bunch of times and all of these files named photos come again and again, and then finally my image with the names under the icon folder put when I click to see the image I get the error message the ' filename or extension is long "

  Hello
  I suggest that you do the following.
  Step 1:
  Try to rename the file and check.
  Step 2:
   

  Move the current location photo files and check.

  Step 3:

   

  Alternatively, you can try System Restore to a point that it functioned very well.

  Aziz Nadeem - Microsoft Support

   

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• In XP, when you try to install the printer, get error "the specified port is unknown."

  See the title of the question.

  * original title - when I try to install the printer, I get the message "the specified port is unknown. This happened after cable tv and cable modem has been installed

  Thanks for your help. I am not a comp read and write to do all this.  here goes

  No printer listed. I deleted all.no ports usbxxx or dot4xxx. several others listed.

  Middle neck is the same. Intel

  the RT is Windows 2000 or xp.

  It's what I expected.

  Usbprint.sys figure 54 times more often in documents and settings. also in nt service pack driver PK. Ditto for usbmon.dll.

  This is not the case.

  1. open Windows Explorer and type C:\Windows\system32 into the address bar.
  2. find usbmon.dll
  3. right click on this file. Select properties, and then click the Version tab. Is - this version 5.1.2600.5512?  If not, is what version?
  4. now, go to the C:\Windows\system32\drivers folder
  5. what version is the usbprint.sys file?

  You have a copy of each file in C:\Windows\ServicePackFiles\i386?  If so, what are the versions of these files?

  If the usbprint.sys and usbmon.dll in C:\Windows\ServicePackFiles\i386 files are identical (or older) versions that the corresponding files in C:\Windows\system32 and C:\Windows\system32\drivers, copy the C:\Windows\ServicePackFiles\i386 files into their appropriate folders.  Then restart.