When I try to do something I like to get the permission of the system administrator

Similar Questions

• When I try to add something to Favorites, I get the list of all that more, just a short list.

  If I try to bookmark a page, I get the choice is about 5 points. I have to save the page in one of them and then move the page to the appropriate folder. I'm used to be able to have a list of everythng.

  You can also click Select to open the complete file list.
  If files in the list are not developed (i.e. are closed) then find one, perhaps faint, arrow icon develop (open) files.

• I can not burn CD when I try to burn a file to a CD, the system does not recognize that I have a CD in D drive.

  Original title: I can not burn CD

  I can down load soft ware, playing CDs; s & DVD, but when I try to burn a file to a CD, the system does not recognize that I have a CD in D drive. How to fix this?

  Hello

  1. have you tried using different CD and check?
  2. were you able to burn CDs without any problem earlier?
  3. have you made changes on the computer before this problem?

  The hotfix in the following article might help you.
  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/mats/cd_dvd_drive_problems/

• When I try to set up "Remote support" I get the error message: "your current system settings prevent you from sending an invitation. How can I solve this problem?

  Using Windows XP Profwssional.

  (1) when I try to set up "Remote support" I get the error message: "your current system settings prevent you from sending an invitation. How can I solve this problem?

  (2) can I use this feature when both computers are on the same network?

  Hello

  (1) you must configure your computer to use the remote control - see here:

  http://www.winxptutor.com/raenable.htm

  and don't forget to make the firewall exceptions

  (2) this function works on the different network also (so a computer can be in the United States and one in Australia)

  Note - a computer can have Windows XP (family or professional edition) and another may have Windows 7, Vista.

  LC

• When you try to start Flight Simulator 2004, I get a warning 'Sign in as administrator required'

  Original title: login as administrator WARNING

  When you try to start Flight Simulator 2004, I get a warning 'Sign in as administrator required'. It never happened to me before, and I can't launch the Simulator. I tried to create a different user account has administrator rights, and then reinstalling the Simulator in this account. It did not work. I don't know how to remove the windows updates and I can't return to my windows to a previous state. Flight Simulator start in "Safe Mode" is no help either. Can anyone give me any help would be greatly appreciated. Thank you in advance.

  Wonders will never cease! I also, lived the same issues with FS2004 and CFS3 which began some time in the past months. Located at KB3086255 was updated and deleted and everything seems to work again.

• When I try to print from photoshop cc I get the message "the instruction at 0xb660643f referenced memory at 0 x 00000006. the memory could not be read. I'm running on Windows using Intel (R) Graphics 4600 8.1

  When I try to print from photoshop cc I get the message "the instruction at 0xb660643f referenced memory at 0 x 00000006. the memory could not be read. I run on Windows using Intel (R) Graphics 4600 8.1. Can someone help me with this?

  Hi Tanuj,

  Thanks for your reply. The problem seems to be a damaged printer driver. I tried to print from my laptop computer rather than my PC and that worked OK. I downloaded the latest driver for the Epson 3880 but then find that the print spooler has become invalid. When I restarted the print spooler, everything worked again and I'm able to print as usual.

  Concerning

  Gordon

  Gordon Gentles

  [email protected]

• When you try to download photoshop elements 13 I get the following message - signature download adobe photoshop elements 13 (1) exe is damaged or invalid

  When you try to download photoshop elements 13 I get the following message - signature download adobe photoshop elements 13 (2) exe is corrupted or invalid what can I do

  redownload.

  If the problem persists, use a different browser or another wired connection or a download manager.

  or if you follow the 7 steps you can directly download a free trial here: Adobe Photoshop elements 13 Direct Download Links, first too. ProDesignTools

  and activate it with your serial number.

  If you have a problem from the download, you follow the 7 steps, or your browser does not accept cookies.

  the most common problem is caused by failing to meticulously follow the steps 1, 2, and/or 3 (which adds a cookie to your system, allowing you to download the correct version of the adobe.com site).

  failure to obtain this cookie translates into an error page displayed after clicking on a link on prodesigntools.com or initiates the download of an incorrect (e.g., current) version.

• When I try to log in my account, I get the message "a network error occurred while trying to connect.  How can I fix it?

  When I try to log in my account, I get the message "a network error occurred while trying to connect.  How can I fix it?

  Hi Mark,

  Are you trying to connect through Adobe Reader? If so, what happens when you connect via the web interface at https://cloud.acrobat.com?

  (We had reports of this error occurring in the latest version of the reader.)

  Best,

  Sara

• When I try to enter something into my money over the program he said "this transaction cannot be entered" why?

  I have vista I know is an older program and my money the program has worked until a few days ago.  Now when I try to do something about it fair to say "this transaction cannot be entered" does anyone know how I can fix it or can it be fixed.
  Thank you

  Hi Judith,

  For more info on sunset (US version only), see http://support.microsoft.com/kb/2118008.

  We do not cover money in this Forum. For the best assistance with money, please visit: http://social.microsoft.com/Forums/en-US/money.

  Remember that money is no longer sold or supported anywhere. If you can find one in or for the United States, it'll be a 3rd party source (where you take your chances) and instantly and instantly obsolete version not supported except through the forum above, and possibly some resources, you might find there (but probably not for too long).

  I hope this helps. To be perfectly honest, it might be time to think about launching these comfortable slippers of old but falls apart and get a new pair. Indeed, an alternative to money. I don't know of a good free product and do not recommend paid products - but I guess you know at least the competitor quite obvious for years and there may be other choices also. But the decision is yours.

  Good luck!

  Kosh

• When I try and publish a site of Muse, get the error: internal error: 400 Bad request. (117007)

  When I try and publish a site of Muse, getting this error:

  Error: Internal error: 400 Bad request. (117007)

  And this isn't to let me publish the site

  Found a similar position that could provide some indication error of publication of Muse

• When I try to renew my IP address I get the error: the rpc server is unavailable.

  I'm not getting Ip Add. in my laptop. When I try to renew the ip with IPCONFIG/renew it gives error the rpc server is unavailable. If I try to start this service in services.msc, that she does not get any changes.

  Thank you & best regards

  Aniket

  I would like to check the status of the Services.

  Click on the Start button and select Control Panel, administrative tools, Services. Locate the RPC end point Mapper in the list and make sure that the startup type is automatic. If it is not set to automatic, right-click and select Properties, general tab. There is a box after the startup type. The options are available in a menu drop-down by clicking on the down arrow to the right of the box. Make the change and click apply and then click OK. Restart the computer and verify if it has started.

  Hope this helps, Gerry Cornell

• I use Encore CS6. When I try to burn a BluRay disc I get the error: "" code: 3, create sequence stc cannot write file M2S "." This error is only when in the project are more then a (menu or chapter or timeline)

  How can I fix this error?

  This error is probably from multiple sources and it has no uniform solution reported. It can be drive or media. It can be permissions. A reinstall of the still has set at least a situation. Reduce the size of the bitrate/project can avoid the error. Make sure that you still run 'as administrator'.

  (If you get this when you try to burn a disc, test the workflow to the point of actually burning a disc by one) construction of an image and b) burning with another software like ImgBurn to Toast for Mac or PC.

• When I try to access windows live mail I get the message that the grille is corrupt and 0x8000FFF error message

  I've been using Windows live mail for some time and now when I try to open it I get a message that my calendar is corrupt and it does not open

  Also appears a 0x8000FFF error?

  How can I fix?

  Thank you

  Hello

  As the issue is specifically related to Windows Live Mail, I suggest that you post the question on the link provided below for assistance.

  The job portal

  http://windowslivehelp.com/product.aspx?ProductID=15

• When you try to open an email in Hotmail, getting the error "Windows Live Hotmail was not able to complete this application"

  
  Windows Live Hotmail was not able to complete this application. Microsoft may contact you regarding any issue you are reporting.
  I get this message when I try to open an e-mail from a known contact, please help solve this problem.
  I tried to download the fix for this issue and it did not work.
  * original title - performance and security in Internet Explorer *.

  In this case open a request support using Windows Live:

  http://windowslivehelp.com/

• Unpacking error when you try to use UTL_COMPRESS. LZ_UNCOMPRESS to get the text XML 'payload' of a BLOB field

  Hi, really appreciate any pointers anyone may have with what I'm trying to do here... the crux of the matter, I have is the following:

  * Try to get the contents of a BLOB column directly in PL/SQL, zipped/compressed

  Uncompressed data are XML... below is an example quite pinked...

  <? XML version = "1.0"? >

  <! DOCTYPE TaskConfiguration >

  < TaskConfiguration >

  < MapKeySet >

  < macro keyboard Type = 'C' >

  namespace < Key > < / key >

  < value > B_O_BrokerChks < / value >

  < / macro keyboard >

  < / MapKeySet >

  < / TaskConfiguration >

  * I learned the information in the table of these pages & used all_directories + a pirated version of proc WRITEBLOBTOFILE (also from here) to get this data in a zip file. That worked fine and I can open the file that results with 7 - zip or explore (how I got the sample above)

  * I tried a few tweaks to the functions provided here to try to get the data directly into the pl/sql (ideally I would like to be able to enter in a type of XMLTYPE data & query only). However, that's where I'm struggling

  * I get the same error as I do with this 1-liner

  SELECT UTL_COMPRESS. LZ_UNCOMPRESS (XML) FROM FooBooBazVendorTab where REFERENCE_ID = 19834

  ORA-29294: A data error occurred during compression or decompression.

  ORA-06512: at "SYS." UTL_SYS_COMPRESS", line 56

  ORA-06512: at "SYS." UTL_SYS_COMPRESS', line 226

  ORA-06512: at "SYS." UTL_COMPRESS", line 89

  29294 00000 - "a data error occurred during compression or decompression."

  * Cause: An error occurred during compression or decompression input source.

  * Action: Verify that the source data is a set of data compressed or invalid.

  Info * @desc to the col de BLOB XML is as follows

  

  * I also read a ' UTL_COMPRESS. LZ_UNCOMPRESS cannot process the file gzip with FCOMMENT' thread here and I tried the potential workaround here who is trying to manipulate the content of the blob to remove the FCOMMENT... but nothing helps. I must say that I am not sure that it's actually my problem.

  Details on the Zip file I can glean from 7 - Zip are as follows...

  

  * Any ideas please? (If Oracle decompress may have a problem handling the XML data itself... with my way of thinking on the FCOMMENT being a bit of a furphy?)

  * Don't know if the zip file hexview can help, but just in case where is >

  

  I would be very grateful for any help you might be able to give me this.

  Rgds Neil

  UTL_COMPRESS use of LZ compression, which is a version less compression compared to normal ZIP files (that use LZW, often with additional ' Deflate' or other methods).

  Anton Scheffer (member of the these for one) wrote a package to compress and decompress found related to this article on his blog:

  Analysis of a Microsoft Word docx and unpack zipfiles, PL/SQL - Blog of AMIS