When the reduction of HARD Disk Partition, receiving the message: "the parameter is incorrect."

Similar Questions

• When you try to copy a. DAT in Vista file, get error 0x80070057L, the parameter is incorrect

  I tried to copy a *. DAT file from a CD on my HARD drive. During the last 5 seconds, I always get the following error message:

  Error 0x80070057L the parameter is incorrect

  I am able to open the file, but can not copy. I tried on my laptop (Vista SP1) and on an another desktop running XP and get the same error.

  What causes this problem?

  Hello

  The problem occurs when you try to copy other files?

  Check if you can copy files in Mode without failure.

  Refer to this article for help:
  http://Windows.Microsoft.com/en-CA/Windows7/start-your-computer-in-safe-mode

  Kind regards
  Afzal Taher
  Microsoft technical support engineer

• Get "error 0 x 80070057: the parameter is Incorrect" when you try to edit the photo details

  I'm changing the date of the photo, and I get this error code, please help me as soon as possible.

  Hello

  The parameter is incorrect error indicates that the files are not accessible when you try to change them.

  Check if the problem continues in a new user account.

  Refer to this article for help:
  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

• Im trying to find my windows oc disk and I keep getting an error shell excute ex failed; Code 87 the parameter is incorrect how can I solve this problem

  Im trying to get my disk of oc windows, and I get an error shell excute ex failed; Code 87 the parameter is incorrect. Please help me

  How can I solve this problem. Thank you.

  Hello

  You did it changes on the computer before the problem started?

  I suggest you perform a startup repair.

  See these articles for help:
  
  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-fix-a-boot-startup-problem

• When you restore the backup files in Vista, get error "the parameter is incorrect."

  I reinstalled my windows vista cd and all my files was erected to another area of my computer for the back, but I don't know how to restore them for use on my laptop. How to restore my stored backup files? It's there, but there are errors such as (the parameter is incorrect)

  Hello

  "and all my files was erected to another area of my computer to school."

  do you have you will actually cost the files yourself or did it do for you through the recovery process

  If this has been done by the recovery of computer manufacturers as part of the resettlement process, you will need to contact the manufacturer of the computer

  If you have saved the files yourself, read this:

  make backups on an external hard drive or DVD

  see if this information helps you

  How to make a backup of your data

  http://www.vista4beginners.com/how-to-backup-your-data

  How to restore your files

  http://www.vista4beginners.com/how-to-restore-files

  the 1st link below is how do the backup complete pc

  http://www.bleepingcomputer.com/tutorials/tutorial145.html

  and that is how do to recover the backup complete pc

  http://www.bleepingcomputer.com/tutorials/tutorial144.html

  and here is the information of microsoft in restoring a system image backup

  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-your-computer-from-a-system-image-backup

  If you have problems, it's in here is a forum for microsoft at the link specifically for backup questions below

  http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads

• optimize disks the parameter is incorrect. (0 x 80070057)

  can not optimize one of my storage disks. its housing starts from the analysis of disk then just simply never really done a Defrag.

  in the event viewer im getting this error for the player in question: "was not optimized because an error occurred: the parameter is incorrect." (0 x 80070057) ».

  the player goes without any problems of error checking.

  any help would be greatly appreciated

  This problem was corrected officially by Microsoft. Click here for the patch: fix for the error 257 event log

• Tried to scan the document.  Received error message - INVALID parameter

  Tried to scan the document.  Received error message - INVALID parameter

  Hi tomh61878980,

  Refer to this KB document for help error: bad parameter. Acrobat

  Kind regards

  Nicos

• I installed creative cloud including cc in lightroom and photoshop cc, but get a ' 87 error: the parameter is incorrect "when I start one or the other.

  This error condition appears when you start these applications.  In addition, lightroom cc can't seem to handle the conversion of my lightroom catalog 5.

  Hi rich,

  Please see the links below:

  LoadLibrary failed with error 87: the parameter is incorrect (PSSC6-64, Win8.1x64, ATI driver)

  WIN8.1 and LoadLibrary failed with error 87: the p... - Logitech Forums

  Kind regards

  Sheena

• I get a message "the parameter is incorrect" when I try a Windows Media Player security upgrade. What I'm doing.

  I get a message "the parameter is incorrect" whwn I try a Windows Media Player security upgrade. What should I do?

  Hello

  1 have. what security update you tried?
  2. in addition, what version of Windows Media Player you have?

   
   
  Try these steps and check.
  a. Click Start and type cmd in run and press ENTER.
  b. in the type guest following command press ENTER.
  WMP.dll regsvr32.exe.
  c. close the command prompt and start Windows Media Player and check.
   
   
  I hope this helps.
  
   

• Windows Vista C drive is not accessible, the error "the parameter is incorrect."

  I recently got a used laptop and have been clean files and install updates and now my drive "C" indicates "0" bytes. I can't open the files or download anything to try to fix. I also got the message "the parameter is incorrect." Can anyone help?

  I suggest that, as it is a laptop that you reinstall Vista second-hand:

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  See you soon.

  Mick Murphy - Microsoft partner

• Trying to open Bacup and restore: "an internal error has occurred. The parameter is incorrect. (0 x 80070057) »

  When I first set up the option to Backup and Restore to backup some documents (only) on an external hard drive, I got the error message "an internal error has occurred." The parameter is incorrect. (0 x 80070057). Then when the clock reaches the designated backup time, the computer actually perform the backup. But now I am unable to open the backup center and restoration of anyway, so I can't adjust the time, I can not restore or select other files to back up. I simply do not have access to the backup and restore options. I always get the "an internal error has occurred." The parameter is incorrect. (0 x 80070057)" whenever I try. So I still can not turn off the current backup parameter, which is set to back up every night at midnight.

  Hello Tjohanne
  Please write to the Microsoft Forums.

  This problem can occur because of a bad sector at the end of the volume that you are trying to save.

  However, as a workaround, you can try the following methods:

  (A). if you save the backup files in the first 750 GB hard drive, you can save the backup files in the second hard drive 300 GB with the letter E to test this issue. However, if you save the backup files to the second hard disk 300 GB with letter E first, you can try to save the backup files in the first 750 GB hard drive with the letter C or D.

  Run (B). disk check to check the hard drive
  Note: Please make sure that the DVD DRIVE is the first boot device.
  1. Insert the DVD of Windows 7 and restart the computer.
  2. when we are asked to press a key to boot from the DVD, please press enter or the SPACEBAR.
  3. click on 'Next' and then click 'repair your computer '.
  4 Please, highlight 'Windows 7' and click 'next '.
  Note: A computer can store multiple copies of Windows 7. Please highlight the one that is experiencing problems. The order of the elements in the dialog box is identical to that on the start menu.
  5. in the dialog box titled "System Recovery Options", click on "Command Prompt" and type the following commands. Please press ENTER after each command.

  C:
  CHKDSK /R

  Note: Please replace "C:" with the actual drive letter of the system drive on which Windows 7 is stored.
  6. Please let me know if an error is detected.

  C. now use another backup tool to check if you can back up files on the computer correctly.

  It may be useful
  Thanks and greetings
  Support Microsoft-dieng
  Visit our Microsoft answers feedback Forum and let us know what you think
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/

• Try to change the drive letter, but get the error "the parameter is incorrect."

  I am trying to upgrade my PC to run Windows 7 64 - bit on a new Intel Solid State Drive (SSD). I install Windows 7 from scratch on the new SSD (which uses the drive letter J) have just completed and changed the drive letter of my original system from C to M.

  My intention was to reuse the drive letter C to the SSD, but the Win 7 disk management tool will not allow the use of C. "All I get is a' setting is incorrect" error message.

  My first thought was to check the location of the Windows page file. It was indeed using drive J, so I put the pagefile on the D drive instead and restarted my PC.  However, this has not fixed the problem. I always get "the parameter is incorrect" when I try to use the letter C.

  What else could be the cause of this problem?

  David

  I tried a change of the HKEY_LOCAL_MACHINE\SYSTEM\MountedDevices registry but it is just screwed to the top of the new installation of Windows on the SSD (it starts in a unusable mode "is not a real installation"). I was not too concerned by what I had already made my decision to reinstall Windows 7 after making changes in bios to disable all disks except the SSD and force a boot from the installation of Win 7 DVD.

  This relocation is now complete and the new partition on the SSD system has the C drive letter. A reboot with the other shows, active records that the original disc of BONE has been reassigned to the next available drive letter.

  My problem is thus solved. If it was the only way to do so is now a moot point.

  David

• Cannot copy AVSEQ01: the parameter is incorrect

  It is a copy of a publication in the field of technology, I did. If this isn't the appropriate forum, let me know where to post. Thank you.

  I'm having a problem. I am trying to copy a. DAT file to a VCD on my hard drive. This particular file is between 600 and 650 MB. When you try to copy the file, I get the following error message: cannot copy AVSEQ01: the parameter is incorrect

  There are two others. DAT files on the CD that I am able to copy, the most important of which is only 13 MB.

  I'm on a Win XP SP3 update. Readers to that I copy are NTFS.

  The last time I had a similar error I was copying MP3 to DVD files on my hard drive. I found myself finally Mac sister to borrow and copy the files to an external hard drive.

  I would prefer not to have to do. Help.

  Thank you.

  Hello

  The question you have posted is related to Technet and would be better suited to the Technet community. Please visit the link below to find a community that will provide the best support.

  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads

• Message error "parameter is Incorrect" when powering down wide network of password protected sharing

  In the network and sharing Center, when I click on the arrow to option sharing protected by password, select turn off password protected sharing and click on apply, I get an error message saying "the parameter is Incorrect."  In fact, I would keep the Division password protected, but my son is trying to use a printer that is hard, connected to my computer via the wireless network and enter my user name and password.  It also has Vista.  I check the box saying to remember the password on her computer, but it does not work. Whenever he stops his laptop computer and restarts, then try to print, enter my user name and password again!  I need to get Vista to work on one of these computers!

  Hello anderfam,

  Thanks for posting on the Microsoft answers Community Forum.

  (1) make sure that the file and printer sharing is enabled.
  (2) If you are using a computer connected to a "working group", click on the arrow next to password protected sharing to expand this section.  Check if password protected sharing is enabled or disabled.

  If the password sharing is enabled, only people with a user account and password for this computer will be able to access your printer. Disable this option if you want anyone on the network can access the printer you share unless you give then a user account and password.

  Printer sharing:
  ------------------

  To share the printer, configure the printer as a shared printer on the server or the host (the computer connected to the printer).
  Make sure that you install the printer driver on each client or the system remote (computers other than the server).
  It is preferable to obtain the most recent driver of your Web site.
  Also check that the printer is compatible with Windows XP and Windows Vista.

  If Windows XP Professional Edition is the host:

  1. open the Printers window.
  2. click the right button on your printer list, and then select "Sharing" in the menu that appears.
  3. Select 'Share this printer', type a share name for the printer and click on 'OK '. Take note of this name as it will be used later.

  When Windows Vista is the client:
  Install the printer driver
  Use a driver downloaded from the manufacturer's site to install the printer
   
  1. If you use the downloaded driver, double-click the downloaded file, then click on 'run '. The file will then be extracted and start the driver installation.
  2 follow the prompts and continue with the installation until you reach the Setup completed screen appears.
  3. on this screen, check the "Select" printer port box, and then click on the manual button 'Selection '.
  4. Select "" LPT1: port local printer ' and click on 'OK', then click 'Finish'. "
  5. in the Printers window, right-click the printer icon and select 'Properties' (access to the Printers window)
  6. click on the tab "Ports", and then click 'Add Port '.
  7. Select "Local Port" and click "new port" button.
  8. Enter the name of the port using the XP computer name and the name of the printer in the \\ComputerName\PrinterName form and then click 'OK '. Close the Port name window.
  9. click on 'Close' in the Printer Ports window.
  10. the new port poster now as being selected. Click "close".
  11. click on "Install driver" If the following window appears. You are now ready to print.

  Another thing is to make sure that if the firewall windows is that there is an exception specified for sharing files and printing.
  Make sure that all the computers are on the same workgroup. By default, XP machines are set to "MSHOME" while Vista machines are set to "WORKGROUP". They should both say WORKGROUP.

  If please reply back and let us know if these measures have helped to solve your problem or if you need further assistance. We will be happy to help you.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problem copying from inside to the external usb HDD, error 0 x 80070057 the parameter is incorrect. Help please

  I am trying to copy a file from my hard drive internal sata to USB external hard drive when I get the error code: error 0 x 80070057 the parameter is incorrect.

  Windows 7 Ultimate. SP1, all updates applied until 01/06/2013. It is the first time for many years that I was puzzled. Help

  Hey, thanks for the back. But I found that Windows has nothing to do with the problem. Recently I had upgraded to Acronis 2013 and used it to make several copies of my C drive for a total rebuild.

  I decided to move these files to my drive to free up space on my internal hard drive, external usb drive. That's when the trouble started. The four files, I moved only gave problems.

  Still scratching my head on this subject. Auto car, supposed to Acronis TIH2013 must be at fault. So I uninstalled with REVO Uninstaller ATIH2013, to a maximum depth of scan. Then downloaded and installed a new copy of the ATIH2013, made a new image to replace the one which gave the trouble.

  Problem solved!

  The first download of Acronis must have had a bug in the download, the second seems to be clean and working properly.

  Anyway, thanks for the help. I'll keep it in mind in case I ever encounter this problem again.