When to consider the new battery T410i - CTO

Similar Questions

• Tecra M10 hangs when booting with the new OEM battery

  Hello world

  I bought an OEM battery for my tecra and now the laptop freezes at boot (the screen remains black with a flashing underscore) with the battery connected.
  I have to remove the battery, connect the AC adapater, turn on the laptop and, after loading of windows, and then connect the battery.

  Any idea?

  Thank you

  > I bought an OEM battery for my tecra and now the laptop freezes at boot (the screen remains black with a flashing underscore) with the battery connected.

  In most cases underscore flashing is related to the problem of faulty RAM or HARD disk.
  In my case, the HARD drive was defective and so I had the same symptom for laptop.

  I m not very well where is the link between the blinking underscore and the new battery but the computer world everything is really strange sometimes and a lot of strange things can happen so maybe the new battery is defective

  Have you noticed this problem with the old battery?
  If not, then I recommend test another battery maybe it helps

• PC Pavilion laptop: no sound on Pavilion g6 after installing the new battery CMOS

  I have a Pavilion g6z - 1 d 00 CTO Notebook PC, model A2F43AV number.  It came with Windows 7 Home Premium, and I upgraded the operating system to Windows 7 Pro (64 bit).

  The problem is that I did not sound, either through headphones or the speakers even if the Volume is set at 55. I first noticed the audio problem after replacing the CMOS battery, as the laptop is 4 years old and he gave me intermittent wireless connectivity problems.  After installing the new battery CMOS, I noticed the wireless driver was missing and downloaded/installed.  Everything was fine except the audio.  Then I reset the BIOS but nothing there as the BIOS version is v.49, and it is the most recent.

  I have also downloaded/installed the driver audio and rebooted the PC.  Still, there is no noise.

  Finally, I have checked the audio drivers and the reporting system they work without any problem.

  What should I do next?

  Thanks, Terry

  @Terry57

  Thanks for the reply,

  I was under the impression that these links would take you to guide step by step, however, it seems that they do not work,

  However, I have provided details below:

  To perform a hard reset on a computer equipped with a removable battery, follow these steps:

  1. Turn off the computer.

  2. Remove the computer from the docking station or port replicator.

  3. Disconnect all external devices from devices such as USB, external displays storage devices and printers.

  4. Disconnect the power adapter from the computer.

  5. Remove the battery from the compartment to batteries.

  6. Press and hold button power for about 15 seconds, remove any residual electric charge capacitors that protect memory.

  7. Insert the battery and plug the power adapter into the laptop, but do not connect peripheral devices.

  8. Press the power button to turn on the computer.

  9. If a boot menu appears, use the arrow keys to select start Windows normally and then press the Enter key.

  10. After you have reconnected each peripheral device, run Windows Update and HP Support Assistant to update all device drivers.

  To perform a hard reset on a computer equipped with a sealed or non-removable battery, follow these steps:

  1. Turn off the computer.

  2. Remove the computer from the docking station or port replicator.

  3. Disconnect all external devices from devices such as USB, external displays storage devices and printers.

  4. Disconnect the power adapter from the computer.

  To perform a system recovery, this link should work: click here

  Keep me posted for any technical assistance,

  Kind regards

• Battery error message! I bought the new battery, isb Unchecked, renamed isbMGr.old still nothing. Help

  I get the message of a bad battery installed. My battery stopped charging during the night. The day before, it would take a charge of 2 hours. I unchecked the IPP thing in msconfig start. Who stopped the hibernation of strength. My problem is has bought a new battery thinking that it would solve my problem and nothing. My charge light flashes quickly. I looked and this means that my battery is no longer good or able to hold a charge. The same thing happens when I put in the new battery. I also uninstalled update Sony Control thing because I read on another Board, it would be useful, but nothing. My model is vpcea36fm.

  Hi llupo87.

  First of all, download and install the utilities for computer laptop Sony and Sony Firmware Extension parser device driver of her provided links below:

  Sony computer laptop commercial: http://esupport.sony.com/US/p/swu-download.pl?mdl=VPCEA36FM&upd_id=6006&os_group_id=6

  Sony Firmware Extension parser Device Driver: http://esupport.sony.com/US/p/swu-download.pl?mdl=VPCEA36FM&upd_id=5983&os_group_id=6

  Then, follow the steps here: http://www.kb.sony.com/selfservice/documentLink.do?externalId=C1010717

  Note: If my post answered your question, please mark it as an "accepted Solution".

• Laptop won't turn on after the new battery.

  A few days ago, when I got home, I found that my VAIO VPCF1290x of 3 years was dead. The battery indicator has been telling me to get a new battery, but I thought it would be enough for now.

  Problem: Laptop wouldn't turn on after pressing the power button.

  (1) with the adapter and the battery still in my laptop, by pressing the power button does not turn on my laptop. However when I press the power button, green light battery (the button itself) indicator on for about a second, then dimmed quickly.

  (2) after reading some forums, I decided to fill my laptop into the battery button for a good 30 seconds trying to turn slot WITH the adapter. It turned on my laptop, but it took a good 2-3 seconds for the laptop to make all sounds as if it was about to start.

  I have since then bought a new battery and a reason that my laptop lights at all. When I connected my new battery to condition it green button energy came on again for about one second then disappeared.

  I don't know what's the matter with my computer and would like to help. I KNOW that I should probably get repaired but would like an idea as to why my laptop behaves like a *.

  EDIT *.

  To give more information, when I have the OLD battery placed in the computer of the battery indicator is a constant flashing orange.

  With the NEW battery sony return the same thing occurs when the battery light constantly blinks orange.

  
  

• My computer with two hard drives and 2 starting systems has the car crash in the solid state. When I got the new drive and tried to restore from time capsule, I lost some data. How can I see what backups are on the time capsule? My laptop is also backed u

  My computer with two hard drives and 2 starting systems has the car crash in the solid state. When I got the new drive and tried to restore from time capsule, I lost some data. How can I see what backups are on the time capsule? My laptop is also saved to the time capsule. Everything is in 'Data' when I look through the Airport utility. I think that the information that I've lost are still there since I was a Capsule 3 to.

  Time Machine backup to a sparsebundle.

  The sparsebundle will use the share name of computer. So, it should be obvious who is your Macbook and that is your Macpro.

  Open the sparsebundle in Finder and keep open the subfolders until you get to the backup of each separate hard drive...

  You has of course set the exclusion in Time Machine?

  By default, Time Machine will exclude your second drive unless you have included it. Did you?

  Once you get to this level during the backup, you can do a full restore manually whenever you want.

• When I install the new version of firefox browser dose being not fit on my screen. I cannot see the tabs or the ul bar and not even leave the firefox avecjoint

  When I install the new version of firefox browser dose being not fit on my screen. I cannot see the tabs or the bar ul and can leave not even firefox without using ctrl-alt-del and opening a master and have it at the end of program. Help, please.

  You may have a corrupted file xulstore.json .
  https://support.Mozilla.org/en-us/KB/changes-toolbars-and-window-sizes-are-not-saved

• When you press the new tab, how can I get the homepage instead of the history of tiles?

  When you press the new tab, how can I get the homepage instead of the history of tiles?

  You can try this.

  • https://support.Mozilla.org/en-us/KB/new-tab-page-show-hide-and-customize-top-sites#w_how-do-i-turn-the-new-tab-page-off

  Instead of the parameter mentioned pref in about: blank, you can enter any site of your choice.

  Ex: encrypted.google.com

• When you use the new button tab is open a new tab, with a search engine that I don't want. How to change this to make it possibly open my home page?

  When I use the new button tab in the tab tool bar, it opens the Yahoo! search engine. I would like to change it to open my home page, or a search engine different. Is it possible to do it and how?

  Thanks for any help!

  I think that is changed by an extension. If you run Firefox in Mode safe search engine comes up when you open a new tab? http://support.Mozilla.com/en-us/KB/safe+mode

• I've upgraded to a newer version of iTunes.  When I opened the new iTunes, all of these songs randomly appeared in my iTunes playlist!  I have NO idea where they came from.  Why they are on my computer, and how to remove them from my iTunes?

  I've upgraded to a newer version of iTunes.  When I opened the new iTunes, all of these songs randomly appeared in my iTunes playlist!  I have NO idea where they came from.  Why they are on my computer, and how to remove them from my iTunes?

  I think iTunes might be showing your iCloud music purchases. Go to the menu bar, and unselect display-> show iCloud music purchases.

• VISTA and the new battery Bluetooth: no sound on headphones (Skype)

  Hello.

  I have a big problem: since I have updated Windows XP to VISTA I had to update the stack driver Bluetooth to the most recent available.
  Installation works very well. I can connect my headset is based. He said "plugged in and connected to Skype", but if I call someone, the sound always comes in my speakers and not via the headphones.

  Once, micro headphones listening, but now no longer works. I can press any button on the helmet, chance anything in the Options of Skyp... Nothing.
  With the old battery on XP the helmet has recognized as a Windows Audio device. He's not with the new battery. In Device Manager, two Bluetooth Audio devices are branded 'problem - driver issue '.

  I wish I could just use the old battery under Vista, but it does not work (not compatible with Vista).

  I really need help, SOON because I used to do all my calls through Skype Out.

  Greetings, your Tim

  You have a stereo headset or a monoheadset? What audio drivers have a conflict - bluetooth audio only or also audio system drivers?

• PL z help us, I got this error code hr0x80040001, when I install the new version of Msn 11, so I came back again to msn 9, but its impossible to install, pl z help

  PL z help us, I got this error code hr0x80040001, when I install the new version of Msn 11, so I came back again to msn 9, but its impossible to install, pl z help

  Is this the same computer (Windows XP?) as in that previous thread of yours? -Online http://answers.microsoft.com/en-us/windowslive/forum/messenger-signin/cant-sing-to-messneger/23775604-86f9-4bd0-8de8-cc39f10df40b

  ~~~~~~~~~~~~

  Related resources can include:

  MSN Solution Center
  (Registration required; Subscribers of MSN Premium only!)
  http://answers.MSN.com/

  How to contact MSN customer service
  http://support.Microsoft.com/kb/940784

• I bought the extra memory. What I have to do something when I install the new memory? __I went to Disk Defragmenter and it always says that I have 35% of free space. The new memory will change this amount? Or is it important?

  I bought the extra memory.  I have to do something when I install the new memory?
  I went to the Disk Defragmenter, and he always says that I have 35% of free space.  The new memory will change this amount?  Or is it important?

  Monday, December 20, 2010 18:53:59 + 0000, Magallón wrote:
   
  > I bought extra memory.  I have to do something when I install the new memory?
   
   
  Generally no.
   
  How many memory currently have installed? How did you buy?
  Did you buy exactly the same type, brand, model, etc. ?
   
  Why do you want more memory? Depending on how much you have now, and
  What applications you are running, it may or may not do anything for you. More memory
  is this not better for everyone. This is my standard message on this
  Object:
   
  The amount of RAM you need to good performance is * not * a
  unique situation for all. You get good performance if the amount of
  RAM you have prevents you from using the file page in a meaningful way, and
  It depends on what applications you are running. Most of the people a typical range running
  Enterprise XP applications find that somewhere around 512 MB
  works well, others need more. Almost everyone will see poor performance
  with less than 256 MB. Some people, especially those who do things
  as modification of large photographic images, can see an improvement in performance by
  adding even more 512 MB - sometimes much more.
   
  If you currently use the page file significantly, more memory
  will reduce or eliminate the use and improve your performance.
  If you do not use the pagefile significantly, it will make more memory
  nothing for you. Reach
  http://billsway.com/notes%5Fpublic/WinXP%5Ftweaks/ and download
  WinXP - 2K_Pagefile.zip and monitor your use of the page file. Who should
  give you a good idea of more memory can help and if so, how
  lots more.
   
   
   
  > I went to Disk Defragmenter, and he always says that I have 35% of free space.  The new memory will change this amount?  Or is it important?
   
   
  You have 35% of your hard drive free. It's disk space, also called
  storage. It is not memory, what is RAM. Adding memory will not make
  any changes to the available disk space.
   
   

  Ken Blake (MS-MVP)

• BlackBerry signing key IO exception when you save the new key to the file

  I have blackberry signing key IO exception when you save the new key file when trying to get my keys. I read the other post - I do not use Windows Vista and JDE component package is installed on my machine. What now?

  It was a windows 7 resolved permission problem

• Implementation for the Apps Error signature: "ioexception when you save the new key pair".

  I'm following the instructions of setting up registration your apps: https://developer.blackberry.com/html5/documentation/signing_setup_smartphone_apps_1920010_11.html.

  After typing the password and move the mouse around, I get a message, "ioexception when you save the new key pair". BB forums say that the problem is that my JDE is not installed, but it is. I'm also not using windows 7. Does anyone know how to fix this?

  As for all my messages, within the hour to ask, I always find the solution.

  http://ekkescorner.wordpress.com/blog-series/blackberrydev/secure-development-of-blackberry-applicat....

  However, it is normal that the instructions on the page webworks lack incredibly. I went with anger poster yesterday on the development of how awful all for blackberry is, and how absurd it is that there is no phone tech support. I decided yesterday against him because I felt bad for RIM as they seem to get into financial trouble. I've been on the fence about BB, and I tried to tell my friends that the newest smartphone looks like it could be promising. While it is true, I have not developed for BB 10 again, if it's developers resources also lack 7 are, I have no doubt that soon she will fail and I will give is more no support.