When you combine files, missing Microsoft Office options

Similar Questions

• code 80070017 error when you try to downland microsoft office service pack 2 on vista

  code 80070017 error when you try to download microsoft office service pack 2 for vista

  0 X 80070017-2147024873 - ERROR_CRC
  Data error (cyclic redundancy check).

  This problem may occur if there is a failure of control of cyclic redundancy (CRC) check during the update process. This failure can occur if the received file is not the file that is expected by Windows Update

  Run the Chkdsk.exe tool to check the drive for errors

  If this does not help, then manually download the update you need and see if that fixes the problem.

  Description of 2007 Microsoft Office Suite Service Pack 2 (SP2) and of Microsoft Office Language Pack 2007 SP2
  http://support.Microsoft.com/kb/953195 TaurArian [MVP] 2005-2010 - Update Services

• When you install the 2007 Microsoft Office Suite Service Pack 2 (SP2), I still received the error code 646... I tried to download the RegCure as advised, but the problem still exists... Please help me with this problem... Thank you

  Ideas:

  • When you install the 2007 Microsoft Office Suite Service Pack 2 (SP2), I still received the error code 646... I tried to download the RegCure as advised, but the problem still exists... Please help me with this problem... Thank you

  I tried to download the RegCure as advised, but the problem still exists...

  Who advised you to 'download... '. RegCure? Doing so could only worse issues! If you ever think that your registry database must be cleaned, repaired, boosted or optimized (it isn't), read http://aumha.net/viewtopic.php?t=28099 and draw your own conclusions.

  See http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/6e716883-7af4-4a9f-8665-2f4dd57eee8d ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Error 1935 when you try to install Microsoft Office 2007

  original title: Setup error

  I recently had a hard drive crash and succeeded him. I am running Vista Home Premium. I'm now trying to reinstall my Microsoft Office Home and Student 2007.  I was getting Error 1935. In efforts to try to correct this, I used the .net Framework cleanup tool and then downloaded .net 3.5 SP1.  When you try to install it, I get an error of installation.  I also downloaded and installed 4 and "fixed".net .net 4 and always had the 1935 error happen.  Any suggestions?

  Hello

  read this information

  Error message when you try to install an Office program: "Error 1935. An error occurred during the installation of assembly component"

  http://support.Microsoft.com/kb/926804

  and if the above does not fix it:

  This is the performance of vista forum

  Please repost in the Sub forum office

  http://answers.Microsoft.com/en-us/Office/Forum/office_install

• What should I do to resolve the error 0x8007007B when you try to activate Microsoft Office 2010 Pro?

  The notification indicates if I have access to the internet, Microsoft Office Professional Plus 2010 will be activated automatically, but the problem is it does not and I always get the notice for about 2-3 months now.  How can I solve this problem? (error code: 0x8007007B)

  Is this a copy of Office Professional Plus 2010 volume license? If so, need KMS activation. That means that guests are connected to the corporate network to enable it.

  Check out the links below which discusses about the same:
  http://answers.Microsoft.com/en-us/Office/Forum/office_2010-office_install/activation-key-doesn
  How to contact a Microsoft Product Activation Center:
  http://support.Microsoft.com/kb/950929/
  http://Office.Microsoft.com/en-us/SharePoint-workspace-help/activate-Microsoft-Office-programs-HA010354227.aspx?CTT=1
   
  Troubleshooting for Office 2010 volume activation

• When you try to install Microsoft Pinball Arcade in Windows 7 Home, I try to run setup.exe and the message that is missing a dll.

  original title: pinball arcade problem

  When you try to install Microsoft Pinball Arcade in Windows 7 Home, I try to run setup.exe and the message that is missing a dll.  Help, please. Thank you.

  This file is missing?

  Since it is an old game, it is possible that it will simply not work.

  Try to use the compatibility options to run the installation - the game is designed for Windows 98, but try different options and if that does not work:
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

• Cannot open DOC files that are sent to me. I have wordpad and Notepad on my computer but you do not have Microsoft Office

  original title: DOC files

  Cannot open DOC files that are sent to me. I have wordpad and Notepad on my computer but you do not have Microsoft Office. Most of the time, I get a screen that says 'open' or 'save' the file and when I click on 'Open', this message disappears. Sometimes it opens, but the message is completely scrambled with letters and symbols.

  Cannot open DOC files in wordpad or Notepad. you will need a more advanced software suite. Try OpenOffice.org - it's free, and it supports the DOC format. But the best solution is to get Microsoft Office once and for all.

  Download OpenOffice.org: http://download.openoffice.org/contribute.html?download=mirrorbrain&files/stable/3.2.1/OOo_3.2.1_Win_x86_install-wJRE_en-US.exe. Note: Click on the link at the bottom that says "http://download.services.openoffice.org/files/stable/3.2.1/OOo_3.2.1_Win_x86_install-wJRE_en-US.exe" to download the program.

  This should solve your problem,

  Rifdhan

• What happened to the "out of office assistant" for the email, when you will be missing? is there another product now?

  What happened to the "out of office assistant" for the email, when you will be missing?

  is there another product now?

  Saturday, September 15, 2012 20:29:54 + 0000, blb_899 wrote:

  What happened to the "out of office assistant" for the email, when you will be missing?

  "Out of Office" is a function of an e-mail program. Not all e-mail messages
  programs for this. What email program are you using?

  Ken Blake, Microsoft MVP

• Error code: 80070424 when you try to use Microsoft Update

  I get an error code 80070424 when you try to use microsoft update, and I can't use the fix it Center, or what I can do... It's on windows xp

  I get an error code 80070424 when you try to use microsoft update, and I can't use the fix it Center, or what I can do... It's on windows xp

  If you believe that you have done this with the same applications or applications, follow the instructions in the order, exactly...

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  Cleaning the components of update on your Windows XP computer

  It is a good idea at this time to ensure that you continue to get the updates you need. This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on theroot of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you'll use the aggressive version - if requested):
  How to reset the Windows Update components?

  Reset.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know usingGoogle (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 20 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/

  Those who can help you discover visually where all space is used. Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing youpouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

  If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end. This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.

• Change the highlight color when you select files or folders

  Hello
  Need assistance to change the highlight color when you select files or folders in Windows Explorer / my document.
  I use Windows Vista with SP2.  I tried to go to control-online personalization panel => color & appearance of the window and changing the settings.  However, I can't change the intensity of the highlights that I see it clearly.  A little blind colours, I would like to change the color to make it darker so that I could clearly see when an item is selected.
  I tried open classic appearance for color options properties more-online advance but did not find an appropriate under "Item" option that I could change.  I tried the step "Selected items" under ' point:' but that only applies when I double click on a file or folder.
  Any advice would be greatly appreciated.
  The

  Salvation of

  Sorry to hear that the option is good enough for you.  I've done some research more and that you still do not see a way to change what you're asking.  As I said before, others have mentioned this issue as well.  If I come across a way to do it, I'll post it here.

  In the meantime, I'm going to Mark this post as answer whose answer is:

  Currently, there is no way to make this change in Windows Vista.

  Thanks for posting on Microsoft Answers.
  Ken
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Failed to get a single space when you type text in "Open Office" etc.

  Can not get a single-spaced, when you type text in "Open Office" etc - still only double-spaced

  Contact support for Open Office. It is not a Microsoft product.

  http://www.OpenOffice.org/support/

• When you transfer files to the internet, the router disconnects from the internet, but the network remains in tact.

  I have a wireless router Belkin g with 1 Server 2003 cable and 2 xp machines and 1 machine vista wireless. My problem is when you transfer files to the internet, the router disconnects from the internet, but the network remains intact. I cannot remote in all computers, but not internet. Once I have restart the router, everything works fine. I was wondering if anyone else has had this problem and how to fix them.

  original title: problems with the router.

  I have no solution for you.  It seems more likely to me that it is a hardware problem - but if it was related to traffic, I would expect that the problem on the downloads more downloads.

  In addition to DSL reports, you could try to ask some of the forums that specialize in the updated firmware for wireless routers.  This is not to say that you need to install the modified firmware (although there may be good reasons to do so), but people who do usually firmware mods are much how the equipment works and what might be its potential failure modes.

  Is one of the best-known sites DD-WRT.com, but there is one list of other here: http://en.wikipedia.org/wiki/List_of_wireless_router_firmware_projects the firmware on these sites was originally designed to run on Modem Linksys WRT54G, but applies generally to Linux with chips Broadcom - based wireless routers and DD - WRT claims that its firmware takes care of some Belkin routers.  If your router is one of those on what DD - WRT will work, there will probably be someone in the forum there will have something for you.  See the list here: http://www.dd-wrt.com/site/support/router-database

• Error Code D59. -When you try to install Microsoft SQL Server 2005 KB2463332

  I get D59 error Code when you try to install Microsoft SQL Server 2005 KB2463332. Any suggestions?

  Hello

  Try to download and install manually and check:

  http://www.Microsoft.com/downloads/en/details.aspx?familyid=D09C1D60-A13C-4479-9B91-9E8B9D835CDC&displaylang=en

  For more information, see this:

  http://support.Microsoft.com/kb/822798

  It will be useful.

• Error messages when you move files PSE13 and PSE14

  I am reorganizing my records of PSE 14.1 (and a few hours before using the PES 13) on Windows 10. This means that I'm moving them from one disk to another using the view of folders on the left panel of the PES.

  Everything goes very well with the first shift after the launch of PSE. No error message and the files in the folder find you in the right place with the folder.

  But for much of the subsequent move there is several error message boxes that must be pressed one by one to move forward. Much more than the number of files involved. However, ultimately files and folders get into their expected places. But with dozens and dozens of needless (?) Click on the OK button.

  Error messages that I see are

  • "A folder with the same name already exist in the requested location" - which is patently false, as I'm only moving called records and verifying that I won't have existing folders with the same name instead of the target. The record was 16 photos inside and the message popped up 55 times.
  • "The operation could not be performed. "The error occurred because of invalid characters, read only location or existing folder with the same name"-this comes very often after the message stated above, but not always. And in multiples as well.

  And every now and then the move operation is going well through.

  I tried to understand if there is a model - but nothing so far... I use no "special characters" in the filenames etc...

  Is there another way to move the folders? Is there a solution to this behavior?

  juhar76990688 wrote:

  Looks like I have at least found a way easier and more predictable and easier to reorganize my files: travel using Windows file / folder management tools-, then to reconnect files from PSE. In this way, I know how many dialog boxes, I need to treat every step - and it is much less than the way PES...

  Yes, it was what I was going to suggest it.

  I did not PSE14 because I'm away from home now. I've already met these messages before, and I think you are right that the first time you move a folder to a new empty destination tree, you do not have problems. I would not be surprised if there was a real bug in the display of folders when you move files repeatedly, but I was not able to reproduce the problem. A possible source of problems would be the way the folder hierarchy is updated in elements; I guess that to keep this folder updated tree, there is a procedure of "cache" to speed up the process (folders display in the tree should work with an image of the Explorer, supplemented by information in the catalog itself). Older versions were very buggy in folders view, but I'm not sure that the current version (since PSE11) is absolutely foolproof.

  Move the folders step by step from the Explorer and reconnect immediately seem to be the best in your case.

• After registration and closing a document in InDesign, I can't open it. I've been working and save on Adobe CC. I can't get it back and when you use file > open, it does not appear. What can I do?

  After registration and closing a document in InDesign, I can't open it. I've been working and save on Adobe CC. I can't get it back and when you use file > open, it does not appear. What can I do?

  Hello

  Please send your InDesign file to [email protected] and I'll take a look at the document.

  If the file is larger than 10 MB, you can zip (and password protect) the file download on Cloud creative (or) Dropbox account and send us the link to the document.

  Kind regards

  Latifa Talwar