When you configure my broadband Internet connection - Article No. 871122 problem

Similar Questions

• When you download torrentz my internet connection turn off

  When you download torrentz my internet connection turn off?

  Hello
  • This happens with this particular site?
  • What were the changes made before the show?
  • What browser do you use?
  You can view these methods:
  Method 1:
  I suggest you to disable any program of security on your computer and check if it solves the problem.
  After reviewing the question you must reactivate the security on your computer program.
   
  Note: Run the computer without antivirus software or firewall is a potential threat to the computer; Be sure to activate security software after completing the troubleshooting steps and after identifying the problem.
   
  Method 2:
  You can also check this link:
  Tips for solving problems when Internet Explorer hangs or stops working
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-Internet-Explorer
   
  Note: It implies also on Windows XP.

• "Limited connection" when you configure the network between two computers XP.

  Original title: Configuration of the network connection

  Trying to establish a network connection between two home PCs., both running Windows XP Pro. Have been through the network on both PC Setup Wizard but, they still say limited, in fact no connection. I use an Ethernet cable between the two Crusader. If it is true what I'm doing wrong?

  Thanx Terry

  Old but good, networking tips from MVP Malke, MS:

  The best and simplest is to buy a wireless router. This way you get Internet connectivity both machines and the added benefit of security more between you and the Internet. Then you configure your network wireless safely, and then you configure file/printer sharing. Here is information on the implementation of a router and also in networking. It seems long, but don't be intimidated. Setting up a router and the LAN of sharing between two computers takes about 15 minutes.

  The router configuration

  Setting up a router is simple enough. Normally, you run the CD that came with the router and follow the instructions. If you're running Vista, maybe the CD that came with the router does not work; I do not know this. But you can set up the router without the CD. Note that if you have Internet cable for the connection you have just set up the router to DHCP (or there may even be a choice of cable to choose). If you have DSL Internet, you select TRP usually and enter the username and password you selected when you initially set the DSL connection. So:

  1. turn off the power to your cable modem.

  2. attach a cable (usually supplied with the router) course Ethernet cat5e Internet/WAN port of the router to the Ethernet port on the cable modem.

  3. connect the ethernet cable cat5e from the network card in your computer to one of the ports on the router. If you do not have an ethernet cable (because you were using USB), you will need to go to the store and buy a.

  4. turn on the cable modem. After that all the lights are on, turn on the router.

  To configure the router:

   

  Have a computer connected to the router with an ethernet cable. Examples given are for a Linksys router. See the manual of your router or the router mftr's Web site. for the parameters by default if you don't have a Linksys. Open a browser such as Internet Explorer or Firefox and in the address bar type:

  http://192.168.1.1 [Enter] (it is default IP address of the router, which varies from router to router then check your manual)

  This will bring you to the login screen of the router. The default username is blank and the Linksys default password is "admin" without the quotes. Enter this information. You are now in the configuration of the router utility. Your configuration utility may be slightly different from mine.

  Click the Administration link at the top of the page. Enter your new password. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE. Re-enter the password to confirm it, and then click Save settings at the bottom of the page. The router will reboot and show you the box of connection again. Do not fill in the user name and put it in your new password to enter the configuration utility.

  Now, click on the link wireless at the top of the page. Change the network name (SSID) wireless by default to something, you'll recognize. I suggest that my clients not use their surname as the SSID. For example, you might want to name your network wireless network "CastleAnthrax" or similar.

  Click on save settings and when you get the prompt that your changes were successful, click the wireless security link which is just beside the Basic Wireless Settings link (where you changed your SSID). If you have a newish computer, you will be able to affect security WPA2-Personal Mode. Do this and enter a password. The password is what you enter on all computers that are allowed to connect to the wireless network. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE.

  At this point, your router is set up and if the computer that you use to configure the router will normally connect wireless, disconnect the Ethernet cable and wireless of the computer should see your new network. Enter the password you created to join the network and start surfing.

  *****

  B. file/printer sharing of

  Excellent, comprehensive, but easy to understand article on sharing files/printer under Vista. Contains information about sharing printers and files, and the folders:

  http://TechNet.Microsoft.com/en-us/library/bb727037.aspx

  For XP, start by running the Network Setup Wizard the on all machines (see warning in section A below).

  Problems sharing files between computers on a network are usually caused by 1) a misconfigured firewall or a firewall neglected (including a dynamic firewall in a virtual private network); or (2) inadvertently run two firewalls such as the firewall of Windows and a third-party firewall. and/or (3) do not have accounts to the same users and passwords on all computers in the workgroup. (4) tries to create actions where the operating system does not.

  A. configure the firewall on all machines to allow traffic to local area network (LAN) as being approved. With the Windows Firewall, it means which allows file sharing / print on the Exceptions tab normally run the XP Network Setup Wizard will take care of this for these machines. The only "witch hunt", it will turn on the XPSP2 Windows Firewall. If you are not running a third-party firewall or you have an antivirus with "Internet Worm Protection" (like Norton 2006/07) which acts as a firewall, you're fine.  With a third-party firewall, I usually set up the allocation of LAN with an IP address range. E.g. would be 192.168.1.0 - 192.168.1.254. Obviously you would substitute your correct subnet. Do not run more than one firewall. DON'T STOP FIREWALLS; CONFIGURE THEM CORRECTLY.

  (B) to facilitate the Organization, put all computers in the same workgroup. This is done from the System applet in Control Panel, the computer name tab.

  C. create the counterpart of the user accounts and passwords on all machines. You do not need to be logged into the same account on all machines and assigned to each user account passwords can be different; accounts/passwords just need to exist and to match on all machines. DO NOT NEGLECT TO CREATE PASSWORDS, EVEN IF ONLY OF SIMPLE. If you want a machine to boot directly to the desktop (a particular user account) for convenience, you can do this. The instructions on this link work for XP and Vista:

  Set up Windows to automatically connect (MVP Ramesh) - http://windowsxp.mvps.org/Autologon.htm

  D. Si one or more of the computers is XP Pro or Media Center, turn off Simple file sharing (Folder Options > view tab).

  E. create share as you wish. XP Home does not share the users directory or the Program Files, but you can share folders inside those directories. A better choice is to simply use the Shared Documents folder. See the first link above for more information on Vista sharing.

  F. you have the job of file sharing (and tested by exchanging a file between machines), if you want to share a printer connected locally to one of your computers, share of this machine. Then go to the printer mftr Web site. and download the latest drivers for the correct system. Install them on the target machines. The printer must be collected during the installation procedure. If this isn't the case, install the drivers and then use the Add Printer Wizard. In some cases, printers must be installed as local printers, but it is outside this response.

• Network connectivity error when you configure the server for vSphere

  I've just set up my first hypervisor, and naturally it became painfully obvious how much I have to learn.

  I met a problem that I don't know how to fix. When you configure the server, I have configured network settings manually in order to give him the good gateway, subnet mask and static IP address. Unfortunately, I still get "Failed" when I ping the DHCP server. ""

  Hope that the community will be able to guide me in this problem. I am sure it takes to understand this, so let me know what is needed and how to get more information. Thank you!

  Find the person who is responsible for the management of the switch and check which port is set to for example the VLAN you need. Depending on your setting of the port must be configured as an access port or a 802. 1 q port if you configure the VLAN ID on the ESXi host

  André

• 80080005 error when you try to update Internet Explorer 9

  When I tried to connect to my Yahoo account, I was directed to download the latest version.  When I clicked on the download, I was directed to download the latest version of Internet Explorer (Internet Explorer 9).  That's when I treceived the error 80080005.

  Hi JuanitaMarzette,

  Method 1:

  You can temporarily disable the security software and firewall installed on the system and check if the problem persists.

  Note: Be sure to enable the security software on the computer after checking.

  You can also check out the following link and try the steps by Marilyn - technical support engineer:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/Windows-cant-check-for-updates-error-code-80080005/89a2926d-df28-4CD8-a3c5-ef54af288415

  Method 2:

  You can try to download the standalone IE 9 files package, if it helps.

  Download Internet Explorer 9

  You can also consult the following article:

  Solve the problems when you can't install Internet Explorer 9

  Hope this information is useful.

• How you would solve intermittent Internet connectivity?

  How you would solve intermittent Internet connectivity?

  Hello Chit mickolo,

  Thanks for posting. Intermittent connectivity can occur for several reasons. First to get a better idea of your installation. Do you use the dial-up or high speed internet? You have wireless or wired connectivity, and whether this happens at a time. You have multiple computers on your network? When this happens does occur with all or a computer? What troubleshooting steps have you made so far if necessary to solve this problem?

  Once again thanks for posting and I can't wait to hear back on your part.
  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• When you configure synchronization how sync manages information on two computers? It merges the information?

  When you configure synchronization how sync manages information on two computers? It merges the information?

  Hello!

  Yes, how Sync is that it brings together all the bookmarks and pushes them to all your devices. Same thing with the story.

  You will lose all the information in one of your computers.

• Is it normal in the 6s overheating iphone when you use a wi - fi connection

  is it normal in the 6s overheating iphone when you use a wi - fi connection

  Overheating is an over-used and misunderstood term.

  An iPhone will turn off if it reaches dangerous temperatures.  Leave in the Sun on the beach and you see him give a warning of the temperature and turns off.

  And Yes, all that the phone will give a little heat.  It's basically a fan less computer that uses the metal case as a heat sink to the warmth of the wick away from the card.

• Internet Explorer 8 for Windows Vista___Installation date: 1 / 16 / 2010 01:24 PM___Installation status: Failed___Error Details: Code 80246007 I get error 80246007 code when you try to install Internet 8. Can you help me? ___

  I get error 80246007 code when you try to install Internet 8 on my laptop that is running Windows Vista.  Can you help me?

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/threads

  Kindly repost in Forum Internet Explorer above.

  They will help.

  See you soon. Mick Murphy - Microsoft partner

• When you print pages in Internet explorer 9, the color is good, but black is extremely light

  When you print pages in Internet explorer 9, the color is good, but black is extremely light (Please note-not the toner) led 2135cn MFP color lazer

  Hello

  Thanks for asking! If I understand correctly, you are facing problem with printing from Internet Explorer, which prints very light black color.

  Before you continue troubleshooting, I would get the little information.

  1. have there been recent changes to the system before the show?

  2 is the issue limited to printing through Internet Explorer?

  3 are you facing this problem with any specific Web sites?

  4. do this problem occurs when you print through the files/applications?

  5. have you checked for ink levels?

  It seems to be that the ink in the cartridge must be completed. In the meantime I suggest you carry out these methods.

  Method:

  Follow the link and run the troubleshooting printertroubleshooter. Check if it helps.

  For additional information refers: link 1,link 2,link 3     

  Answer us with the results. I'd be happy to help you further.

• WndOws 7 internet connection with multiple users problem

  I just got a new PC running Windows 7.  I have set up the accounts of four members of my family. When you configure access intenet (Verizon DSL) I got a window saying I could not share a connection high speed and had to set up a for each user.  So I set up a connection high speed for each user with the same login information.  The problem is that the first time that a user logs on, it works fine, but as soon as I switch users, the Internet connection is very slow or not there--Explorer said for the page to load, but it is very slow and always interrupted by and windows error message.  the broadband to disconnect and reconnect do nothing to solve the problem.  The only thing that fixes it is to restart the computer.

  Hi HWEng,
   
  This error message do you receive when you try to use internet explore in another account? Also post the exact error message so that we can help you better.
   
  You can run the troubleshooter and check if that helps.
   
  1. click on the Start button and then click Control Panel.
  2. in the search box, type troubleshooting, and then click Troubleshooting. Click View all, and then click Internet connections.
  3. follow the directions in the wizard.
   
  For more information http://windows.microsoft.com/en-us/windows7/products/features/windows-troubleshooting
   
  If you are still having the same problem then, I suggest you to remove the connection parameters to broadband and then turn off UAC (user account control). Now set up a connection broadband for all user accounts and check if it works.
  http://Windows.Microsoft.com/en-us/Windows7/turn-user-account-control-on-or-off

  Internet Explorer does not start or stops responding
  http://support.Microsoft.com/kb/926449
   
  You can also see error messages in the event viewer. If you find error messages after return the exact error message.
   
  Measures to check the application event log:
   
  1. click on start.
  2. in the search box type eventvwr.msc, and then on enter.
  3. now, click Application in the event viewer (local).
  4. now locate the event log on the right side of the event viewer window.
   
  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer 
  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer
   
  Hope this information is useful.
   
  Umesh P - Microsoft Support

• Cannot access internet when you configure with internet connection sharing.

  INTERNET HELP?

  I tried to use the internet connection to my wireless on my PC laptop not wireless using an Ethernet cable. I have connected my pc not wireless to my laptop wireless pc with ethernet cable, I did everything as requested on the site of "Dummies" and the PC says its connected but when I try to go on Internet Explorer, it does not work? HELP! : (PS) my PC is Windows Vista and my laptop Windows 7

  Hello

  1. While sharing was the Internet works fine before?
  2 did you change on your computers before this problem?

  I suggest you follow these methods and check.

  Method 1: You can follow the Windows Help article below and check that ICS is set up correctly.
  Set up a shared Internet connection using ICS (Internet Connection Sharing)
  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-shared-Internet-connection-using-ICS-Internet-connection-sharing
  If ICS is not configured correctly, then you must post back the result by running the following command
  To do this:
  a. click the Start button.
  b. type cmd in the search box.
  (c) in the command prompt, you must type ' ipconfig/all' and check the result.

  Take a screenshot of the command prompt and post.
  To take a screenshot, you can follow this link below.
  Use capture tool to capture screenshots
  http://Windows.Microsoft.com/en-us/Windows-Vista/use-Snipping-Tool-to-capture-screen-shots

  Method 2:  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows?T1=Tab03

  I hope this helps.

  Thank you.

• Windows Media Center crashes when I try to the configuration of the internet connection TEST.

  Hi, I had a problem with my wmc which is not up-to-date guides. It was running great!  I turned it off of multimedia features to get a clean reinstall and now it crashes all the time.  I tried everything in the forums and 8 hours later, I still have accidents.  I don't know what to do anymore.  Can someone please help me get my media center works again without crashing?

  I am Windows 7 home Prem 64 bit slot

  Here are the accident report:

  Description:
  Stopped working

  Signature of the problem:
  Problem event name: CLR20r3
  Signature of the problem 01: ehshell.exe
  Signature of the problem 02: 6.1.7600.16385
  Signature of the problem 03: 4a5bd053
  Signature of the problem 04: System
  Signature of the problem 05: 2.0.0.0
  Signature of the 06:53 problem has 12529
  Signature of the 07: 1B 38 problem
  Signature of the 08:72 problem
  Signature of the problem 09: System.UriFormatException
  OS version: 6.1.7601.2.1.0.768.3
  Locale ID: 1033

  Read our privacy statement online:
  http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:
  C:\Windows\System32\en-US\erofflps.txt

  I was also facing the origin with a message 'no internet connection' on the media center.

  help please.

  Thank you guys.

  OK, so I fixed it!

  Please people check your PROXY server on your machine settings.

  MAKE SURE THAT YOU DO NOT HAVE

  PROXY SERVER

  USE A PROXY SERVER FOR YOUR LAN
  (NO VERIFICATION) If there is a check, remove it!  Reboot the machine and you're ready to go.

  I hope this helps!

• My computer shuts down when you try to open Internet Explorer

  Original title: windows xp, does not

  my computer stop suddenly now when I try to open int explore, a box appears asking what program I want to use to open it, if I click on int expl another box appears, options to run or save, choose whatever an i, nothing happens.i tried to access panel a system restore or simply to check perf and hand It won't allow me to access one of these progs, he said only: application not found, basically, I can't access what, whether internet connection is fine.

  Hello

  Method 1:

  I suggest to do a SFC (System File checker) scan on the system and check if the problem is resolved. Follow the steps mentioned in the article below.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

  Method 2:

  I suggest that you should follow the steps mentioned in the article below.

  How to change or choose the program that starts when you double-click a file in Windows XP

  http://support.Microsoft.com/kb/307859

• 'Server Unavailable RPC' when you try to repair the connection on Windows XP.

  Original title: "RPC server unavailable" win xp
   
  I have an internet connection works fine, but trying to fix the wired (Ethernet) it returns error "windows can not finish repairing... the following action could not be completed: renewal of your IP address."
  Then I went to cmd, then typed "ipconfig/release" to the manual release and renew and it returned the error "the RPC server is unavailable."
  What is going on?
  Answer your questions:

  1. Why are you trying to repair the connection, if you have already connected to the internet?
  2 are you facing problems of internet connection?

  -That is a good question. I know you want to know why I tried to repair the connection.  Well, I just noticed that the web pages were unresponsive for a little while and I was surprised that I got these errors when it worked fine.
  -I had left my computer without having to reboot for two days, then I did my job, started cold PC and that fixed my 'problem '.   Actually, I just tried to fix the connection a few minutes ago and he managed, so I went in cmd and ipconfig enough played & / renew and everything worked fine.
  -Sorry to bother you, I guess I was just curious as to why these error messages have been coming.
  Thanks for your response!