"you have been connected with a temporary profile.

I can't find the words to express the degree of anger with microsoft! I use W7 for a few weeks and just started getting the message "you have been connected with a temporary profile" and lost everything that was on my desk (shortcuts application, saved files and settings). I scoured internet (including MS help/support/etc.) and found the HUNDREADS of comments on this problem but with NOT a SINGLE solution that works and WITHOUT EXPLANATION of why or how it happened. This simple question is W7 TOTALLY USELESS and I'm trying to figure out how to recover my money on buying. If I could get my hands on the neck of the W7 developers, I'd be more than happy to squeeze the @$ % # out of them and they could keep my money. It's PATHETIC and a technology CRIME! All comments with a value of manufacturing?

Hello

Data is not lost and is accessible from any ADMIN including the hidden Admin account.
Check the C:\Users\Your user name.

You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
Mode has no default password (unless someone has changed the password so it should be available).

Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
has been known to cause this problem.

Error message when you log on a Windows Vista-based or Windows 7 using computer a
Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
http://support.Microsoft.com/kb/947215

How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

How to fix error "your user profile was not loaded correctly! You have been connected with a
temporary profile. "in Vista
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

BE VERY CAREFUL IF YOU USE THIS ONE:

DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

How to enable or disable the built-in Windows 7 Administrator account
http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

Use the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN.
This allows clear of corruption. Do the same for other accounts if necessary after following the above message.

You can use the hidden - administrator account to make another account as ADMINISTRATOR with password even
(or two with the same password) use a test or fix the other.

You can run the Admin account hidden from the prompt by if necessary.

How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
http://www.SevenForums.com/tutorials/668-system-recovery-options.html

What are the system recovery options in Windows 7?
http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

How to create a Windows 7 system repair disc
http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
always leave to an Admin who is not used except for testing and difficulty account).

Difficulty of a corrupted user profile
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

I hope this helps.

Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

Tags: Windows

Similar Questions

  • Profile of user not loaded correctly, you have been connected with a temporary profile. How can I fix it?

    I use a Toshiba Satellite with windows vista. My father gave it to me, but instead of creating a new user account, I have renamed the original administrator account. two years later, I have 3 accounts on the laptop, which only the original is still the sole Director and has access to all partitions on the hard drive as well.

    A week ago, my computer laptop power had reported issues so I immediately sent for repair. I came home today and the Standard 2 user accounts work perfectly. However when I connect to my original administrator account I get this pop - up message:

    "The user profile was not loaded correctly. You have been logged on with a temporary profile. Changes to this profile will be lost when you log out. Check the log of the events for more information or contact your administrator "

    I lost all my profile settings, including internet bookmarks, music playlists, etc. The office looks like a brand new installation of Vista and all the customization disappeared. I can't afford to lose all data. It is seriously important and was on my desk and in my documents.

    How can I get my profile without losing any data?

    Hi Salman91,

    Thank you for visiting the Microsoft Windows Vista Community.   New profile created, try browsing to the old profile (C:\users\username).  You should see all the old user data.  If this does not work, try to copy the files in Safe Mode.

    Please let us know if that helps.

    Dena
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Receive the error message "you have been connected with a temporary profile, in this profile, you can access saved files and something new created or added to this profile will not be saved"

    Original title: temporary profile

    I was wondering if anyone can help... I have a compaq laptop, windows 8 and the last few times ive turned on n signed in its took much longer than usual and connect to a temporary profile where it seems that everything I had there before such as files and photos have already disappeared. But it then opens with a message saying something along the lines of. . "You have been logged on with a temporary profile, in this profile, you can access saved files and any new tjing created or added to this profile will not be saved" does anyone know how solve this...

    Hi Lucie,.

    Activation of the built-in Administrator account can help get the problem solved.

    Perform the steps suggested by Pinaki displayed from the link below and see if it helps.

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-system/Windows-8-keeps-loading-with-temporary-profile/583abee6-645D-42a1-88da-063547c6eea0

    Answer please if you have any questions.

  • I get the message "you have been connected with a temporary profile" and I can't get my normal profile more

    Message "you can not access your files and files created in this profile will be deleted when you close the session"

    Message "you can not access your files and files created in this profile will be deleted when you close the session"

    Use this tutorial. It applies to both Vista and Windows 7.

    http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  • "Your user profile was not loaded correctly! You have been connected with a temporary account.

    Last night I shut down my computer like I usually do. Today when I woke up, I turned on the computer, entered my password, it took forever to load and then it was just a blue screen with a few icons.  All my documents, pictures, music, etc. have disappeared and it's as if I use my computer for the first time.  I immediately thought that I had a virus, ran a scan and nothing came.  Then I checked my memory, and it's the same as last night, I felt a little hope that my files have to be somewhere.  Did a system restore, but that did not help.  I found the files when I clicked on "Start" then "search" then "c: / users I found everything, but don't know how to get back into that account."  I am only connected under a temporary account.  Help, please!  I have no idea how to solve this problem!

    Last night I shut down my computer like I usually do. Today when I woke up, I turned on the computer, entered my password, it took forever to load and then it was just a blue screen with a few icons.  All my documents, pictures, music, etc. have disappeared and it's as if I use my computer for the first time.  I immediately thought that I had a virus, ran a scan and nothing came.  Then I checked my memory, and it's the same as last night, I felt a little hope that my files have to be somewhere.  Did a system restore, but that did not help.  I found the files when I clicked on "Start" then "search" then "c: / users I found everything, but don't know how to get back into that account."  I am only connected under a temporary account.  Help, please!  I have no idea how to solve this problem!

    Hey Kimberly9701

    Here are the tips from microsoft on a temporary profile loading

    "Your user profile was not loaded correctly! You have been logged on with a temporary profile.

    Changes to this profile will be lost when you log out. Please see the the event log for more information or contact your administrator. »

    http://support.Microsoft.com/kb/947242

    Walter, the time zone traveller

  • Windows 7 gives message "you have been logged on a temporary profile", whenever I connect

    I just re-formatted my computer and put windows 7 on it, but now whenever I log it gives me a message saying that I was connected to a temp profile and I'll lose info that I created on the account. Any ideas on what I can do to solve this problem would be greatly appreciated. Thanks in advance, Keth

    If the problem is limited to your current account, then the following process would be much simpler than reloading Windows:

    1. reboot the computer in Mode safe.
    2. log on as an administrator.
    3 Rename the file c:\Users\Keth in c:\Users\Keth.bad
    4 restart and log in as Marie.
    5. If it works, transfer all existing files from c:\Users\Keth.bad to c:\Users\Keth.

    The process is described in detail here:
    http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

    Post again if you need help with step 5 above.
    _________________________

    If this answer solves your problem, please click "Propose as answer" so that the thread can be closed. Thank you.

  • my computer is the connection with a temporary profile and I can't access some files how to fix this?

    my computer is the signature with a temporary profile and I can't access any of my files how to fix this?

    Hello

    Please post in the forums for your version of Windows.

    Ask a question in a select Technical Forum here appropriate injector:

    Microsoft Community - Forums
    http://answers.Microsoft.com/en-us

    Please provide all the information we need to help us help you.

    How to ask a question
    http://support.Microsoft.com/kb/555375

    =================================

    These methods should help for Windows 7 or Vista.

    References to Vista also apply to Windows 7.

    You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. THE ADMIN
    Safe Mode account has no default password (so unless someone changed
    the password should be available).

    Some programs such as the Google Updater (if you've added the Google toolbar,
    Chrome or Google Earth) has been known to cause this problem.

    Error message when you log on to a Windows Vista-based or Windows 7
    computer by using a temporary profile: "the user profile Service has no logon.
    Unable to load the user profile.
    http://support.Microsoft.com/kb/947215

    Difficulty "the user profile Service has no logon. User profile cannot be loaded. "Error in Windows 7
    http://www.SevenForums.com/tutorials/186131-user-profile-service-failed-logon-user-profile-cannot-loaded.html

    How to fix error "the user profile Service has no logon. Could not load user profile. "in
    Vista & Windows 7.
    http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

    How to fix error "your user profile was not loaded correctly! You have been connected with a
    temporary profile. "in Vista & Windows 7.
    http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

    BE VERY CAREFUL IF YOU USE THIS ONE:

    DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

    ----------------------------------------------------------------------------------------------------------

    For Windows 7:

    How to enable or disable the built-in Windows 7 Administrator account
    http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

    Use the hidden administrator account to lower your user account APPLY / OK then
    Raise it to ADMIN. This allows clear of corruption. Do the same for other accounts
    If necessary after following the above message.

    You can use the hidden - administrator account to make another account as an ADMINISTRATOR with
    your password even (or two with the same password) use a test or difficulty to another.

    You can run the command Admin account hidden from the command prompt
    from there if necessary.

    How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
    http://www.SevenForums.com/tutorials/668-system-recovery-options.html

    What are the system recovery options in Windows 7?
    http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

    How to create a Windows 7 - free methods system repair disc
    http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

    ----------------------------------------------------------------------------------------------------------

    For Vista:

    How to enable or disable the real built-in Administrator account in Vista
    http://www.Vistax64.com/tutorials/67567-administrator-account.html

    Use the hidden administrator account to lower your user account APPLY / OK then
    Raise it to ADMIN. This allows clear of corruption. Do the same for other accounts
    If necessary after following the above message.

    You can use the hidden - administrator account to make another account as an ADMINISTRATOR with
    your password even (or two with the same password) use a test or difficulty to another.

    You can run the command Admin account hidden from the command prompt
    from there if necessary.

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    What are the system recovery options in Windows Vista?
    http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

    How to create a Vista - free methods recovery disk
    http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

    ---------------------------------------------------------------------------------------------------------

    If you can't access your old account you can still use an Admin to migrate to one
    new (remember to always leave an account Admin who is not used except)
    to test and difficulty).

    Difficulty to a Vista - corrupted user profile
    http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

    Difficulty to a corrupt user - Windows 7 profile
    http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • Error Msg: "you are logged on with a temporary profile. Restart your computer and try again.

    Try to start Windows Easy Transfer, but I get the an error msg saying I am connected with a temporary profile.

    I use Windows XP and have 2 user accounts settings; each with administrator privileges. What is going on? How can I connect to avoid this problem?

    I found this information.

    http://voices.Yahoo.com/TECHTIPS-Windows-7-easy-file-transfer-tool-error-you-7098418.html

  • 'Environment of the user' Windows cannot load the user's profile, but you have logged on with the default profile for the system.

    Original title: the user environment

    After starting windows, on the Welcome screen, this message always comes.
    "User environment.
    Windows cannot load the user's profile, but you have logged on with the default profile for the system. DETAIL: Not enough memory is available to process this command.
    And all my files that I save before you shut down or restart my pc all the my sample files on the desktop, my documents disappear...

    Thanks... :)

    This is typical of a corrupted profile.  To recover, perform the following steps:

    "How to recover damaged Windows XP user profile"
      <>http://support.Microsoft.com/kb/555473 >

    Almost always, corrupt profiles are accompanied by damaged drive.  During recovery, run a disk check with the /r or /f on your computer option.

    "How to perform disk error in Windows XP check"
      <>http://support.Microsoft.com/kb/315265 >

    HTH,
    JW

  • Connected with the temporary profile "I can't access all the windows apps or my personal files.

    OT: Connected with the temporary profile.

    When I log on my ASUS laptop, I tells me that I am being logged on with a temporary profile.  I can't access windows applications or my personal files.  It started after my laptop suddenly stopped while on internet explore.  According to the event log, event ID 4608 created a change of security status and it is logged when LSASS. EXE starts and the audit system is being initialized.  Is there anyway to stop this temporary profile/access and return to normal use?

    Many things in Windows Vista and Windows 7 is still applicable to Windows 8.

    Difficulty of a corrupted user profile

    http://mywindows8.org/fix-corrupt-profile-in-Windows-8/

  • User profile service, you have been logged with the default for the system profile, please see the the event log for more information or contact your administrator.

    User profile service... Help... I'm stuck and going nowhere.

    Hello

    Whenever my user try to connect this MSG poping up to the top of any solution please.

    User profile service

    you have been logged on with the default for the system profile, please see the the event log for more information or contact your administrator.

    Click on this URL and follow the instructions 100% your problem has been resolved http: //support.microsoft.com/kb/947215

    Try it.

  • Is connected with the temporary profile

    Windows keeps connect me with a temporary profile, only on my account not the other two, I want to just access my files, the links using microsoft in other issues do not work and if I create a new user who logs with a profile temporary, just also want to know how I can access my files so I can get out them of this user account

    THESE LINKS I TRIED BEFORE DO NOT WORK:
    http://support.Microsoft.com/kb/811151/en-us
    http://support.Microsoft.com/kb/555473

    Thank you.

    Hi Alisha,

    You said that didn't happen on your account and not the other two. And you said you tried these links, I hope you don't delete all users according to the instructions...

    in any case, you can easily have access to your files on the account that you have trouble accessing via two other accounts work. Navigate to C:\documents and settings\ this folder contains all the user profiles and all the documents and the data is stored in the profile folder name. Find the folder with the name of your account on it and inside you will find all the documents, Favorites, etc.

    To get to C:\documents and settings\ open my computer, double-click the drive that you installed Windows, and Documents and Settings will be a folder you will see in the beginning of the hard disk.

    -Alex

  • Error message: "user profile Error - connected with a temporary profile.

    folder lock... now cant get nothing in return.  photos are important... I know that there is a way, as has happened before... but do not remember...

    Your computer has recently made an update? There are three consecutive profile simillar problems in this forum. I checked my update and there are 13 important updates, I invited I have to wait. The problem is serious, which can lead to loss of your files.

    Vista - user - logged on with a temporary profile profile error

    http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

    I hope I could help

  • Windows cannot load the users profile but you have logged on with the default profile for the system. Insufficient system resources exist to complete the requested service.

    It started just without something new being created!

    This happens when your user profile is damaged or corrupted.  To recover from this, try one of the following Microsoft KB articles:

    "How to recover damaged Windows XP user profile"
      <>http://support.Microsoft.com/kb/555473 >

    "Windows XP problems if your profile is corrupted"
      <>http://support.Microsoft.com/kb/326688 >

    HTH,
    JW

  • Keep getting connected to a temporary profile on Windows 8!

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_10-security/help-IM-being-signed-in-as-a-temporary-account/160eb455-1daa-40ba-B606-cd3dc27b0e22

    I have connected to my account today and it showed 'Prepare Windows'. He signed me a temporary profile. I tried the procedure described in the above link and nothing seems to work.  The files and software on my desktop icons are gone (photo #2)

    All my files and software are always accessible in the 8470p folder.

    When I create a new folder, it will appear under TEMP. DBA-NB1314562 (photo #2)

    This is the second time this week, I encountered this problem. The first time I had the solution in the link above works perfectly, but it does not work for me now. I restarted my computer laptop too.

    Is there a way I can solve this?

    Thank you!

    Hello

    See if this helps you:

    You could do a Safe Mode system restore to before the problem:

    "How refresh, reset or restore your PC.

    http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

    To restore your PC to an earlier point in time

    1. Enter in the right edge of the screen and then click on search.
      (If you use a mouse, point to the upper right of the screen, move the pointer of the mouse down and then click Find.)

    2. Enter the control panel in the start search box and press or click on Control Panel.

    3. Enter the collection in the control panel search box, and then tap or click recovery.

    4. Press or click Open System Restore, and then follow the instructions.

    "Start settings for Windows (including safe mode).

    http://Windows.Microsoft.com/en-us/Windows-8/Windows-startup-settings-safe-mode

    _____________________________________________________________

    "How to fix"You have been connected with a temporary profile"error in Windows 8 and 8.1" . "

    http://www.eightforums.com/tutorials/38817-you-ve-been-signed-temporary-profile-fix.html

    _____________________________________________________________

    "[Fixed] temporary profile Windows 8 and Windows 8.1 problem."

    http://www.sysprobs.com/fixed-temporary-profile-Windows-8-and-8-1-problem

    This might interest you: in link above

    4) if none of these methods work for you, the only true path creates a new user account and copy the data.

    See you soon.

Maybe you are looking for

  • Drop-down menu site does not work in Firefox 19.0.2,, but in tests of Chrome and Opera. Why?

    This is the URL: (edited) it is not made public. You'll notice the main menu at the top. Options [OUR FORUM] and [OUR ITEMS] have drop-down menus. These drop downs work everywhere except when it is in [OUR ITEMS]. At first I thought that this may be

  • BlackBerry Z10 face Notifications in the hub

    I also have some issues with the central region.  First disable Facebook notifications continued completely appearing after the update to 10.1.2019.  Second, Delete messages by date (by clicking on the date and by removing all pray them to this date

  • Combining books saved

    Using LR 6 with Win 10, I created three saved books between each in a separate collection. I want to combine them into a single for the printing of the text presentation. Each separate book has a provision of different image that I want to keep in th

  • Add new items to toolbar in 2015 FM

    Hi all, would you please let me know how I can add new items in toolbar of direction as (N-to-Persian or Farsi-to-N) and etc within the 2015 FM.

  • Lentitud en cuestiones actualizando esx 3.5 storage has 4.1

    Buenos dias,I am in the process of change back Vmware granjas con el vCenter 2.5 there hosts ESX 3.5 has the version vSphere 4.1. Estoy con the first of in Quebec are esta actualizado el virtualcenter ellas y estoy actualizando los hosts. El problema