When you try to click on firefox I get a message, firefox is already running and asks me to shut it down. I have no other programs running. I can not even firefox Google chrome or internet explore.

Similar Questions

• When you try to update Windows XP, I get the message: error number: 0 x 80245001

  When you try to update Windows XP, I get the message: error number: 0 x 80245001

  Hello

  If you have configured the installation of the automatic update of your computer, the computer downloads the files necessary for the installation of Windows updates in the background and records them in certain folders on your computer. During installation, these downloaded files are extracted by the requirement by the services of update running on the computer.

  The error you are getting means that some of these extracted files required by Windows Update have been damaged. Now, in order to solve the problem better, we need more information about the computer that has the problem. José asked a few questions about this computer in the first reply to your message, it will be very useful if you could answer these questions.

  Here is some important information that we need:

  1. What is the level of service pack installed on your computer?
  (Click the Start button, click run, type winver, and press Enter to know that information)

  2. what update failed to install with this particular error code?
  (Please refer to the method 1: search for the installation error code in the Windows Update troubleshooting tool section of this article to learn how to check your update history to find this information)

  In the meantime, you can follow these steps on the computer and see if that helps:

  Note: These steps will give the files associated with Windows Update in your computer. Perform these steps would be clear Windows Update history on the computer.

  1. click on Start, click run , and then type Services.msc in the run box and press ENTER. This should open the windows of Services for you.

  2. then find the following three services in the list of Services and stop them (by clicking on it and click on stop) one by one:

  Automatic update service

  (BITS) Background Intelligent Transfer Service

  Cryptographic services

  3. open Windows Explorer and navigate to the following location:

  C:\Windows\

  Rename the folder C:\Windows\SoftwareDistribution in SoftwareDistribution.old

  4. go to the following location:

  C:\Windows\System32\

  Rename the Catroot2 in Catroot2.old folder

  (be careful here, do not rename the C:\windows\system32\catroot folder, you must rename the Catroot2 folder only)

  5. now go back to the Services window and start the services of three you had stopped earlier.

  Now, close all open windows, restart the computer and try updates and install them. If it fails again, please answer with the information that we requested.

  I hope that the information I provide here helps you. If you still need assistance, we know. We are happy to be of assistance.

• When you try to reset or uninstall I get a message saying I have to restart to complete the installation of a previous version. Any suggestions?

  After downloading v25.0.1, FF has been slow. I tried the reset, but it would give me the message that I have to restart to complete the installation of a previous version. I tried to uninstall, but the version on the list was v 21. I received the same message when you try to uninstall. I want to upgrade to v 25.0.1, but something prevents the process.

  Do a clean reinstall and delete the program folder before Firefox to (re) install a new copy of the current version of Firefox.

  Make sure that your security software (antivirus) is not blocking files, preventing Firefox update all files in the Firefox program folder.

  Download a new copy of Firefox and save the file to the desktop.

  • 25 Firefox: http://www.mozilla.org/en-US/firefox/all.html

  Uninstall your current version of Firefox, if possible, the settings in the software security and cleaning of the Windows registry.

  • Do NOT remove the data personal when you uninstall your current version of Firefox, because all profile files will be deleted and you lose personal data such as bookmarks and passwords from other versions of Firefox profiles.

  Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.

  • (32-bit Windows) "C:\Program Files\Mozilla Firefox\"
  • (Windows 64 bit) "C:\Program Files (x 86) \Mozilla.
  • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.
  • http://KB.mozillazine.org/Uninstalling_Firefox

  Your bookmarks and other personal data are stored in the Firefox profile folder and will not be affected by a uninstall and (re) install, but make sure that 'delete personal data' is NOT selected when you uninstall Firefox.

  If you keep problems also create a new profile.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox
  • http://KB.mozillazine.org/Profile_backup
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

• When you try to initialize creative cloud app get the message 'no subscription found. ' What should I do?

  I'm the Manager of the team. We bought three licenses. I downloaded everything and when you try to open Adobe InDesign CC 2015 on my machine I received this message: I was connected when I received this message.

  "No subscription found.
  We could not find a subscription Adobe InDesign CC 2015 associated with this identification code Adobe you can buy a new subscription or if you do not have a subscription and are unable to access it, please contact Customer Support.

  You can also choose to start this product at trial.

  Have a different Adobe ID? »

  I tried to disconnect, then reconnect and nothing has changed.

  This document should be useful.

  https://helpx.Adobe.com/creative-cloud/help/manage-teams-membership.html

• When you try to initialize creative cloud app get the message 'no subscription found. ' I am already connected. What can I do?

  I'm the Manager of the team. We bought three licenses. I downloaded everything and when you try to open Adobe InDesign CC 2015 on my machine I received this message: I was connected when I received this message.

  "No subscription found.
  We could not find a subscription Adobe InDesign CC 2015 associated with this identification code Adobe you can buy a new subscription or if you do not have a subscription and are unable to access it, please contact Customer Support.

  You can also choose to start this product at trial.

  Have a different Adobe ID? »

  I tried to disconnect, then reconnect and nothing has changed.

  Hello

  I see that you have purchased 3 licenses Creative cloud device users in your contract of VIP. To deploy this license, you will need to download cloud creative package and create package for creative cloud and deploy it. You can check the following links for more information on this

  Manage your cloud of Adobe Creative for education device licenses

  Create packages with Adobe Creative cloud for education materials

  for detailed help, please contact our customer service at customer service

• When you try to use Windows Help & Support, get a message unable to start

  I tried to search for a topic USING WINDOWS & SUPPORT... But, I got a MESSAGE saying that "Windows Help & Support ' is unable to start and for more information go to or click here to: http//.windowshelp.microsoft.com.  All of this and now I'm HERE... Is there someone or someone who can help me?  Give me some suggestions. Thank you...

  Hello

  1. about what you are looking for?

  2. what you trying to accomplish?

  3. don't you make changes to your computer?

  I suggest you follow the link and check.

  I can not open Help files that require the Windows Help program (WinHlp32.exe)

  http://support.Microsoft.com/kb/917607

  I also suggest you to follow the link and check.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

• When you try to use Windows DVD Maker, get the message that Windows has closed this program

  Installed a new software for video (because the creation of windows dvd won't work) and before its opening, it says windows has closed this program... solutions.  And nothing!  It does this too often with internet explore.  Help!  Do I have to change some parameters of security or something?

  * original title - Windows maintains close everything I try to guess

  Hi twilight,

  ·         Do you have what video creation software installed?

  ·         How long have you been experiencing this problem?

  ·         Have you done other recent changes on the computer?

  ·         What is the exact error message/code?

  ·         The problem occurs with the entire application?

  I suggest you try the steps mentioned below and check if it helps.

  Step 1: Start the computer in safe mode and check if the problem persists.

  If the problem persists in safe mode run clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode

  Step 2: No detection system file checker (SFC).

  http://support.Microsoft.com/kb/929833

  Step 3: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

• BlackBerry smartphones when you try to make a call, I get this message: "unable to connect. Call in progress"

  Until a few days ago this phone has worked in the car (Bluetooth) and elsewhere.

  Suddenly, when I was in the car with the phone, I got a call that I could not access. I tried to connect, but the device did not respond.  However, I could cut an incoming call.

  Subsequently, and still in the car, every 10-15 seconds the phone rang again.  Each time, I was not able to accept the call but managed to put out of service.

  This continued for a while until I've finished my trip.

  Later, I managed to stop the ringing by cutting the storm.

  Subsequently, I was unable to make any calls or receive all.  I get the message: "unable to connect. Call in progress".

  I called the storm of my fixed line and it does not sound.

  A problem really disturbing last night was the alarm.  That has been fixed at 5:00 this morning so that I could watch the broadcast eligible Grand Prix.  He didn't ring and went to rehearsal still sounds do not.

  Why my previously sensitive phone suddenly disappeared into pieces?

  You are welcome.

  Good luck.

• When you try to start Googe Earth I get the message, "Directx mode not supported.

  Dell Inspiron 5100 laptop, running Windows XP pro service Pack3, Directx9 upgrade enduser DURATION 11, latest video driver from Dell, 32-bit color.  Uninstalled, re installed Google Earth several times.  Cleared cache.  Off 'atmosphere' at GLmode which loads only certain borders of yellow color.  Control internet, found many people having the same problem.  No solutions found for the moment.

  It's the Windows 7 Forum, the XP Forum at http://answers.microsoft.com/en-us/windows/forum/windows_xp

  Can you use this option, "Start Google Earth in OpenGL mode", rather than any option of DirectX?

  DirectX: Description of the DirectX Diagnostic tool
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;190900&FR=1&PA=1&SD=HSCH

  You can also try here.

  http://productforums.Google.com/Forum/#! Forum/Earth

• When you try to take a picture I get this message "some thing went wrong all by taking this photo"

  ORIGINAL TITLE: they won't let me take pictures on my laptop with windows 8

  It keeps saying some 'thing was bad all by taking this picture' so I removed the camera and then installed it again and it did not a difference, what should I do when I install another app that takes pictures it still wont allow you to take a picture :/

  Have you turned off UAC? Try to turn it back on.

  Because Windows 8 applications require UAC to be turned on to work properly.

  I had the same thing, could not take pictures or video when I had disabled UAC. Turned it back and everything started working again.

• When you try to open a download, I get a message to define applications and I do not know how to do this

  How to set the applications to download

  How to set the applications to download

  Hey ferrel harper

  is less than wha do you mean?

  also open a particular file, you need the associated program to be installed on your computer

  links below are how to set the program and the file association for you information

  How do I... Change file extension associations in Windows Vista?

  http://articles.TechRepublic.com.com/5100-10878_11-6172036.html

  http://ask-Leo.com/where_did_file_associations_go_in_windows_vista.html

  http://www.mydigitallife.info/2008/06/22/restore-and-reset-file-association-in-Windows-Vista-back-to-original-default/

  http://www.Winhelponline.com/blog/how-to-create-new-file-type-association-in-Windows-Vista/

  http://www.vista4beginners.com/set-your-default-programs

  Walter, the time zone traveller

• HELP Please: problems connecting to Google Chrome or Internet Explorer: think it has to do with my network cards

  My computer works perfectly except that I can't connect to the internet using Google Chrome or Internet Explorer. Internet works fine.  I have another computer that is connected to the same network, and it works fine.  Also my signal strength is optimal. When I try to go on Google Chrome, it says that the web page is unavailable & the reason why is error: 105 (net: ERR_NAME__NOT_RESOLVE) the server is not found.  When I try to use the Internet, I get this message:

  Device is not working properly because Windows cannot load the drivers required for this device (Code 31)
  I've tried everything and looked at other forums. I went into Device Manager and tried to update the driver, but whenever I do it just says that all updates are already made.
  I really feel that my problem has something to do with network cards. When I go to Device Manager and discovered the network adapters 13 different adapters appear. The 1st is Atheros AR5007 802. 11b / g Wireless Adapter and it looks like it works very well but there are 11 different (Microsoft 6to4 adapt #10) (all have different # s, 10,11,12,14,15,16,17,18,20,5,9) there is (NVIDIA nForce Networking Controller)
  I think the problem is with the Microsoft 6to4 adapters because win I right click & then click on PROPERTIES of each adapter says: State of the device, this device is not working properly because windows cannot load the drivers required for this device. (Code 31) So, is to "find solutions", says & when I do that nothing happens, a message flashes on the screen that says: "Could not load driver software" and that windows is looking for information, but nothing ever happens.
  Can some1 please help me! My computer worked fine and both Google Chrome and still worked and then out of the blue it just stoped working. Any information would be very useful

  wisports,
  Thank you for visiting the Microsoft Answers community forum.

  You have found the source of your problems.  You must remove or uninstall, all the cards of 6to4.  Also delete everything that said map Tunnel or card miniport WUN.  Also uninstall or disable, Internet Protocol version 6 (TCP/IPv6) Properties tab on existing network cards.

  Once you have done these things, restart the computer and make sure that the 6to4 adapters does not return.

  Let us know how it works for you.
  Thank you
  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• "Cannot start Microsoft Office Outlook" error message when you try to click on a name or contact us on a Web site to send a msg email on Outlook/microsoft office 2003

  "Cannot start Microsoft Office Outlook" error message when you try to click on a name or contact us on a website to send an email on Outlook/microsoft office 2003 Vista OS msg. My laptop came with Microsoft Office 2007 TRIAL version, but I already had Microsoft Office Pro 2003, so loaded on when I got it almost a year ago. My trial expired months ago... but never uninstalled cause 2003 worked. Then I wanted to do something in WORD and kept pulling up the 2007 trial and was confusing, so I sent the 2007 trial stuff to recycle bin, but not yet the uninstall. Since then all of a sudden I started to get this error msg. I can open OUTLOOK very well... BUT I don't even use OUTLOOK at all. I send from comcast.
  1. How can I get rid of this error?
  2. does anyone know how I can get my comcast open up when I go to a website to webmaster option instead of defaulting to outlook? And I already checked, "set as my default" is NOT enabled in outlook.
  Help, please!

  Hello

  Please check with the experts of the Office and Outlook here: (re - ask your question in these groups)

  Discussions of Questions General Outlook
  http://www.Microsoft.com/Office/Community/en-us/default.mspx?DG=Microsoft.public.Outlook.General&lang=en&CR=us

  MS Office discussion groups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx
  And here:

  Microsoft.public.Outlook discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Outlook&cat=en_us_81f401b3-b3fe-4e8d-B291-066f30b63ec8&lang=en&CR=us

  Office newsgroups
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.Setup&cat=en_us_642d5640-c1ba-43C3-A224-b3ec1473346c&lang=en&CR=us

  I hope this helps. Rob - bicycle - Mark Twain said it is good.

• When I try to close a tab, I get a message, "you are about to close 2 tabs. Are you sure you want to continue? ».

  Original title: close the active tab only.

  When I try to close a tab, I get a message, "you are about to close 2 tabs.  Are you sure you want to continue? ».  How can I close only the current tab and save the other tabs?

  Hi Patricia,

  1. you try to close the tab on Internet Explorer or a different browser?

  2. are you trying to close the browser window to close the tab or just by clicking on the tab window?

  You can click close tab at the top of the tab itself want to close on the right hand side.

  For more information, you can consult the following article:

  Browsing listed in Internet Explorer 8: frequently asked questions

• Firefox blocks all https sites-, I can not even my Google mail!

  Firefox blocks all https sites, I can not even my Google mail - there is no option to bypass this blocking!

  Or, I can simply go to http://google.mail.com... I don't see ANYTHING in the settings to disregard certificates

  Firefox has gone downhill the way in many ways...

  Tittiger said

  I respectfully disagree with you about Firefox...

  The code of Firefox is so bad that I only use it as a last resort. Constantly, it crashes and has done this on several PCs in 2 or 3 years.

  In any case thanks for the suggestions, but it turned out malware that Panda deleted.

  If Firefox is a 'last resort', why you use it to check your emails? Do you use Google Chrome to access Google mail? I've never had problems with Firefox, then maybe I'm just lucky.

  Added the: Chrome and IE are coded by companies funded by programmers. Firefox is a program open source funded through donations to not-for-profit, which means that's what users are doing. If the 'bad code' is probably just different, not bad.