Where did go to file sharing

Similar Questions

• Visual studio runs (.exe) file can run in the other computer where did not install visual studio?

  Visual studio runs (.exe) file can run in the other computer where did not install visual studio?

  I use a visual studio 2012 to make a program file,
  This is a file to execute, which is my generated program file.

  I can throw in another computer in which another computer has not installed any visual studio?

  Thank you

  Hi Chi,

  The question you posted would be better suited in the MSDN Forums since we have dedicated to this support; We recommend that you post your question in the MSDN Forums to get help:

  http://social.msdn.Microsoft.com/forums/en-us/category/VisualStudio, vslanguages, vstfs, netdevelopment, vsarch

  Keep us updated on the status of the issue.

• I have this spl55.tmp file in my Windows/temp folder. I have also several other "sp" name of files in the same folder. Where did they come from?

  I have this file in my Windows/temp folder. It is 9.8 MB. I have also several other "sp" name of files in the same folder. Where did they come from? Can I just delete them?

  Thank you

  Paul

  If I'm not mistaken reference you the files are temporary files from the print job, you made and can be deleted safely.

• Slow connection to SMB/AFP file sharing

  Configuration:

  OSX 10.11.3 (15 D 21)

  Server V5.0.4

  Running services: calendar, file sharing, Manager profiles, Time Machine, VPN, Web, Wiki, DNS, FTP sites, open the directory

  We have a problem which has lasted for several months where clients that attempt to connect to file sharing (AFP or SMB makes no difference) takes too long to authenticate. He constantly takes ~ 40-45 seconds to open a session or even reject a bad password. The really strange part is that it affects all computers on our network with the exception of a Mac Mini. Seems not be customer specific, i.e. all users connect without delay on a Mac Mini and slowly on other computers. I was not able to determine differences in settings of network connection or on different computers, but I don't know there are parameters, I'm not aware of that.

  Did someone met with something like that?

  Thanks in advance.

  The faster connection Mac Mini there the active local folders?  Or using a faster SMB protocol?

• Is Windows 7 file sharing allows simultaneously several user record updates

  I want to allow multiple users to read and update shared files.  I can do that with the collective dwelling characteristics of files shared in

  Windows 7?

  Essentially no. In fact, she is stuck at a level of access. If a file is opened to a single user, it must be locked read-only to another. Even if the 1st user then abandons the connection to the 2nd user held that he read only until they give up and pick it up again. This has nothing to do with the sharing of files in Windows 7, it would apply in a true client/server scenario. Network access is file level and must be complete, you can have a single user update a sector and another one another in the same file.

  Even at a database level place opportunistic locking on records to avoid 2 contradictory written which takes place at the same time, how a system can focus on accessing a field between 2 users.

  The most obvious solution in a client/server for documents environment is SharePoint, but even that files 'reserved' users to restrict the other until there is only new.

  The classic example of what I saw was at the time of the BACK where the networking addon could allow 2 files of the same name to be created in the same directory because he did not have a functional locking system does not work. When a second user writes the file, that it doesn't have the same identity that the first has so his own writing, 2 files of the same name in a directory could not happen, but it did.

• How to prevent file sharing automatic connection with the commune iCloud account?

  I have access to my Mac remotely and always assumed that if I did not check the box pw to remember when asking username/pw I would always need to enter pw to access a remote volume.  This, of course, is the case usually except that I noticed that I have three computers (home, office, mobile) with the same user name and I can connect to the remote volume by simply entering the IP address of the target computer. I receive no request for pw.  This occurs despite the Macs with different user pw. I went to keychain in public services and did ' t see the pw of file sharing, so I guess they are in iCloud keychain.  All 3 Macs have the same username and the same iCloud account, and I have iCloud Keychain selected on all 3 Macs.  Potential problems would be if someone stole my cell phone when I signed to or if someone at work was playing with my computer after hours - they can then access my home computer (or vice versa). If it is stored in iCloud Keychain, so I don't see an obvious way to change.  So I disabled the option of trousseau in iCloud in system preferences on my laptop, not saved in keychain to my Mac and restarted; When I tried to access my home Mac, it helped to connect without my pw but I have noticed that at the top of the window, text says 'connected as [email protected]'- real username omitted here.  Is anyway to avoid this short of having each Mac journal on an account different iCloud (then would lose Sync calendars etc.). Thank you

  What tool do you use to access other Macs?

  Built-in screen sharing?

  

• File sharing sharing too!

  I have a strange problem with file sharing.  I fully share a folder, but when I find the Mac that shares the record of another Mac, I see the folder, I shared * AND * I see all the home from another account of shared user-directory and the shared directory is * writeable *.  I don't understand why this is happening.

  Details:

  I have a folder ' / users/shared/Scanner Inbox "I added under file sharing (System Preferences |) Sharing | File sharing).  See screenshot:

  

  When I have my MacBook Pro's ' MacMini' eyebrows, I see "Scanner Inbox", but I * also * see "wasserham", which is the directory to one of the accounts to log on 'MacMini '.  Here is the screenshot of the MacBook Pro, MacMini of navigation:

  

  I am not even connected as user "wasserham" on the MacBook Pro.  This is not sensible.  Can anyone offer some advice on what I did wrong, and how I can stop this insecurity too share?

  Thank you!

  It's normal when you log in as administrator on the file server.

• File sharing settings

  I recently updated two of my Macs to El Capitan, and simply check the box under system preferences/sharing file sharing, I can share files between two Macs - wonderful back.

  However, I have an old Mac 10.5.8 Leopard who won't get upgrades and I can't seem to access its files from the new Macs. When I turn the sharing files in Leopard unit, that I can see it in the Finder under shared on the new Macs, however I can't connect from a unit - nothing happens when I click on "connect as" in the Finder. Now in the old unit I can access files on the part of the new units, but not the reverse.

  The good thing about El Capitan is that there is nothing to put under the menu sharing in system preferences. However the older Leopard unit, I 'Options' where I can select AFP, FTP and SMB sharing. I tried turning them on and in various combinations, but I can not just connected to the El Capitan units leopard machine.

  Any suggestions?

  Here's a hint, I restarted the old Mac and from the Finder when I double click on the old Mac from the side bar under shared I get this in a pop-up window:

  Cannot open "Of Tom Kiefer MacBook" because the original item cannot be found.

  The only option is to click OK.

• Windows Server 2012 Standard File Sharing - access denied?

  So I have a simple Pentium Dual core server here, and I'm putting in place local file sharing. For some reason any however I can't write files on the disk, even when you sign in as administrator of any computer in the network.

  I've been Googling the problem for hours and I found something on the deactivation of the audit, I did in secpol.msc, but I tried to disable it, and it will not always grant access.

  Is something directly above my head, or is it a problem in the file sharing himself?

  Sorry if I'm not providing a lot of details here, but I'm really frustrated about that. If you need any further information I'll post fortunately.

  Thank you for your time for reading.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Where is Windows Clipboard files? What directory? I was not able to find this information. I want to get back to a previous screen printing.

  Where is Windows Clipboard files? What directory? I was not able to find this information. I want to get back to a previous screen printing.
  I didn't not turn off my computer and I did 3 other print screens after that I want to get back because I didn't stick it in Paint by mistake.

  The clipboard objects are not stored in a file. When you send something to the Clipboard, it is stored in a memory location that is only available for the operating system.

  A web search will find 3 third-party programs that will allows to record multiple Clipboard entries. Research on '' programs Clipboard. '' Microsoft® Security MVP, 2004-2009

• File sharing problem

  I have four computers in small office. Three see each other, the fourth XP invisable on a Windows network. They all have the same name of "workgroup". and file sharing enabled. I can ping other but cannot get windows network to see?   Number four computer is configured to share files, I ran the wizard several times to double check that the names are the same.  Any suggestion would be appreciated.  James

  You left out the part where you tell us what version of Windows is located on each computer. This is important.

  What follows is quite old, but still excellent, former MS MVP Malke boards:

  Here are the steps of general network troubleshooting. Just cannot apply to your situation, so just take the bits that are. It may seem daunting, but if you follow the steps in the links and suggestions below calmly and consistently, you will have no difficulty to implement your sharing.

  Excellent, comprehensive, but easy to understand article on sharing files/printer under Vista. Contains information about sharing printers and files, and the folders: http://technet.microsoft.com/en-us/library/bb727037.aspx

  For XP, start by running the Network Setup Wizard the on all machines (see warning in section A below).

  Problems sharing files between computers on a network are usually caused by 1) a misconfigured firewall or a firewall neglected (including a dynamic firewall in a virtual private network); or (2) inadvertently run two firewalls such as the firewall of Windows and a third-party firewall. and/or (3) do not have accounts to the same users and passwords on all computers in the workgroup. (4) tries to create actions where the operating system does not.

  A. configure the firewall on all machines to allow traffic to local area network (LAN) as being approved. With the Windows Firewall, it means which allows file sharing / print on the Exceptions tab normally run the XP Network Setup Wizard will take care of this for these machines. The only "witch hunt", it will turn on the XPSP2 Windows Firewall. If you are not running a third-party firewall or you have an antivirus with "Internet Worm Protection" (like Norton 2006/07) which acts as a firewall, you're fine.  With a third-party firewall, I usually set up the allocation of LAN with an IP address range. E.g. would be 192.168.1.0 - 192.168.1.254. Obviously you would substitute your correct subnet. Do not run more than one firewall. DON'T STOP FIREWALLS; CONFIGURE THEM CORRECTLY.

  (B) to facilitate the Organization, put all computers in the same workgroup. This is done from the System applet in Control Panel, the computer name tab.

  C. create the counterpart of the user accounts and passwords on all machines. You do not need to be logged into the same account on all machines and assigned to each user account passwords can be different; accounts/passwords just need to exist and to match on all machines. DO NOT NEGLECT TO CREATE PASSWORDS, EVEN IF ONLY OF SIMPLE. If you want a machine to boot directly to the desktop (a particular user account) for convenience, you can do this. The instructions on this link work for XP and Vista: set up Windows for the connection automatically (MVP Ramesh) - http://windowsxp.mvps.org/Autologon.htm

  D. Si one or more of the computers is XP Pro or Media Center, turn off Simple file sharing (Folder Options > view tab).

  E. create share as you wish. XP Home does not share the users directory or the Program Files, but you can share folders inside those directories. A better choice is to simply use the Shared Documents folder. See the first link above for more information on Vista sharing.

  F. you have the job of file sharing (and tested by exchanging a file between machines), if you want to share a printer connected locally to one of your computers, share of this machine. Then go to the printer mftr Web site. and download the latest drivers for the correct system. Install them on the target machines. The printer must be collected during the installation procedure. If this isn't the case, install the drivers and then use the Add Printer Wizard. In some cases, printers must be installed as local printers, but it is outside this response.

• How can I connect Windows XP to several networks, Wi - Fi for internet and the other for file sharing?

  On windows XP, I need to connect to two different networks. Free wifi for the internet and the other for file sharing.

  Different gateways, different static address, same subnet mask. But there is problem when operating simultaneously and must

  a network must be disabled. Is it possible to run simultaneously?

  original title: served various networks simultaneously on windows xp

  Go to where you have configured the static IP addresses for your network adapters.  Leave the "default gateway" blank for your local file sharing adapter and insert a valid default gateway for your wifi Internet adapter.  Of course, this will limit your adapter in a single subnet - which should be OK for use at home or small office to share local files.

  This should work as long as the two physical subnets have two different subnet numbers. In general, this means that the first three digits of the IP address of the adapter can not be the same on both adapters - if they are, then you need to make one of the subnets. (i.e. one is 192.168.1.xxx and the other would be 192.168.2.xxx).  This is usually accomplished in the router configuration page.

  HTH,
  JW

• Vista do not you answer ping - file sharing also stopped working

  Greetings!
  I have problems with my windows vista computer. It can access the internet, load the pages and other servers, ping, but he stopped answering the ping requests and file sharing has stopped working (other computers cannot access its actions).
  -J' have already disabled the two firewalls (both windows and f-secure).
  -If I run wireshark, I can see the Ping ICMP requests (as they arrive at the machine), but ignores them (no ICMP response).
  -When I try to browse the computer from another windows (windows 7), he sees the computer (they are on the same workgroup), but it is impossible to browse. Try to access it from a mac also fails.
  -J' tried to use direct ip address instead of the netbios name, with no luck (access to \\192.168.1.101, for example).
  -Of course, I tried already reboot my router, computers, etc.
  -sfc/scannow detected a few corrupted files (but says he fixed them). But it did not help.
  -J' thought that it might be a problem with windows system files, so I uninstalled SP2 and then reinstalled with no luck at all.
  -J' already tried to reset the tcp ip (netsh int ip reset) stack but also had no success.
  -I'm clean of viruses; already run 3 different AVs (including boot from rescue CD to detect rootkits) and nothing came.
  I'm almost reinstall my whole windows, but I'm afraid even if it cannot solve the problem and having to install from scratch and reinstall * all * my new aplications will be a last operation of the station. Clues as to what I could do? Is there a way manually reset/reinstall only the sectors/services windows network?
  Thank you for your time,
  Gustavo

  Greetings!

  Just the answer I finally had myself on this issue.
  The problem was a malware removal tool called Combofix. I had an infection and several tools to clean, one of which was this tool. I ignored the warning to leave unattended a guru of malware removal, and I just let it do its job (I know, I was wrong... but desperate times require desperate measures). Apparently, he finished and my system was working fine... but not the file share and ping responses.
  Finally, there is a way to reverse the changes made by the latter:
  • Go to C:\WINDOWS\ERDNT\subs\erdnt.exe, double-click erdnt.exe , and then restart the machine.
  • If this does not work, then navigate to C:\WINDOWS\ERDNT\Hiv-backup\erdnt.exe, double-click erdnt.exe and restart the machine.
  By doing this, the reverse tool changes to the system registry and these two services that weren't previously returned to work normally.
  The Trojan horse itself not worried anymore, because I ran Combofix all as precautionary measure, since I had already deleted the Trojan horse itself (ZeroAccess, by the way).
  That being said, I would think twice before getting a Dell computer next time... The version of Vista that comes with it only allows a 'Clean Install' and not 'upgrade install', which seriously complicates to reinstall the system failure (since I have to reinstall * everything *). I wonder if other versions of windows to PC manufacturers have the same limitations...
  Gustavo

• WRT610N/RT31P2 Internet OK, no file sharing / print

  I installed a WRT610N router this weekend.  The 610N takes care of my local positions Microsoft network and connects via the Ethernet port to a RT31P2, where my phone is connected.  The RT31P2 is connected to a cable modem.

  After a pass to a Linksys tech, Internet access for all 4 computers connected to the WRT610N works.  VoIP phone service works.  The only thing that doesn't work is not is the file sharing and printers on the network Windows.

  All systems running versions of Norton Internet Security (as they were when he is on the cable network) and the Windows Firewall is off.  The four systems show in the table of DHCP reservations, but none of them can see themselves as part of the working group.

  Any ideas what may cause this?

  Problem solved.  New versions of Norton require that each individual computer be labelled with full trust from the view of the network card rather than enter a range of IP addresses of trusted network.

• Automatically file sharing is turned on whenever I turn on my PC window vista 32 bit operating system-business

  original title: file sharing?

  File sharing is automatically turned on whenever I turn on my PC window vista 32 bit operating system-buisness? I cut file sharing at least a thousand times and find this desktop pc which is not wireless it is pluged to my internet modem wireless broadband! Well, I find that file sharing is enabled immediately... What can say me... This is a hack or security or file-sharing compromise after the ' turn off just turns on immediately when I restart my desktop PC under administrator who is past-on account! HELP PLEASE!     Jason Grant Cozzie.

  Hi Jason SR.,.

  1. did you of recent changes on the computer?

  2. do you have security software installed on the computer?

  Usually, this would happen if you have any third-party security software installed on the computer.

  I suggest you temporary disable the security software installed on the computer and check if it helps.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  I hope this helps!

  Halima S - Microsoft technical support.