Where is the auto-lock on the latest iPhone update?

Similar Questions

• Where are the latest updates for PES 11 located?

  Where are the latest updates for PES 11 located?

  Unless you have the version of mac app store Publisher > help > updates, you should get all the available updates.

• Why attached used pps files opened after the latest Automatic update of the ie8?

  Attn: Microsoft Brainiacs; IT IS VERY ANNOYING!
  attached pps files won't open if clicked in outlook express/ie8 after automatic update more recent.
  When I try to open files pps attached, this is what I get.
  a box with a red x will appear and this is the message;
  "this file has no program associated with it for performing this action.
  Create an association in the FOLDER OPTIONS Control Panel."
   
  Before the automatic update, this function worked fine.
  Also, the association for pps files is still there in the Folder Options Control Panel.
  and more if I save the pps file attached somewhere / anywhere and then click on it, it opens fine.
  .. This failure to launch opening pps files attached, that happened after the latest Automatic update,
  .. just one more why people hate automatic updates or updates of any kind.
  like the previous functions of work suddenly and inexplicapbly no longer work after the update took place!
  So what's the cure for this annoying problem?
  E-mail address is removed from the privacy *.

  I have XP SP2 and PPS PPViewer 7 NOT VISTA
   
  That's what my watch key

  HKEY_CLASSES_ROOT\.pps\PowerPoint.slideshow.8
   
  not HKEY_CLASSES_ROOT\PowerPointViewer.SlideShow.11\shell\Show
   
  I also tried renaming it as shown below, and it will not let me NOW WHAT?
   
  where can I find IE7 to down load? all I see on the web and the site of MS is downloads for IE8
   
  Hi wwollmuth,

  I'm not sure from your post what version of Vista you are using or if you use the Viewer for Powerpoint as opposed to full Powerpoint (2003 or 2007?), but I can try to give you help to fix.

  For. Files PPS (Microsoft PowerPoint slide show)

  • Click Start, type regedit.exe and press ENTER
  • Navigate to the following branch:

  HKEY_CLASSES_ROOT\PowerPointViewer.slideshow.11\shell\Show

  • Click view , and then click Rename
  • Type the word Open so that the show is replaced with the Open command
  • If you have the PowerPoint 2007 Viewer is installed, repeat the steps above in this key, thus:

  HKEY_CLASSES_ROOT\PowerPointViewer.slideshow.12\shell\Show

  • After having changed from Show to Open, close the Registry Editor window.

  For. PPT (Microsoft PowerPoint Presentation) files

  • Click Start, type regedit.exe and press ENTER
  • Navigate to the following branch:

  HKEY_CLASSES_ROOT\PowerPointViewer.show.11\shell\Show

  • Click view , and then click Rename
  • Type the word Open so that the show is replaced with the Open command
  • If you have the PowerPoint 2007 Viewer is installed, repeat the steps above in this key, thus:

  HKEY_CLASSES_ROOT\PowerPointViewer.show.12\shell\Show

  • After having changed from Show to Open, close the Registry Editor window.

    For more information, please click on the following link:

    http://www.Winhelponline.com/articles/149/1/Unable-to-open-PPS-attachments-directly-from-Windows-mail-in-Windows-Vista.html

    For now, the only 'solution' which is known to 'cure' this problem is to uninstall IE8 and go back to IE7.

    I hope this helps. Let us know if you need help.

    Hi wwollmuth,

  I'm not sure from your post what version of Vista you are using or if you use the Viewer for Powerpoint as opposed to full Powerpoint (2003 or 2007?), but I can try to give you help to fix.

  For. Files PPS (Microsoft PowerPoint slide show)

  • Click Start, type regedit.exe and press ENTER
  • Navigate to the following branch:

  HKEY_CLASSES_ROOT\PowerPointViewer.slideshow.11\shell\Show

  • Click view , and then click Rename
  • Type the word Open so that the show is replaced with the Open command
  • If you have the PowerPoint 2007 Viewer is installed, repeat the steps above in this key, thus:

  HKEY_CLASSES_ROOT\PowerPointViewer.slideshow.12\shell\Show

  • After having changed from Show to Open, close the Registry Editor window.

  For. PPT (Microsoft PowerPoint Presentation) files

  • Click Start, type regedit.exe and press ENTER
  • Navigate to the following branch:

  HKEY_CLASSES_ROOT\PowerPointViewer.show.11\shell\Show

  • Click view , and then click Rename
  • Type the word Open so that the show is replaced with the Open command
  • If you have the PowerPoint 2007 Viewer is installed, repeat the steps above in this key, thus:

  HKEY_CLASSES_ROOT\PowerPointViewer.show.12\shell\Show

  • After having changed from Show to Open, close the Registry Editor window.

    For more information, please click on the following link:

    http://www.Winhelponline.com/articles/149/1/Unable-to-open-PPS-attachments-directly-from-Windows-mail-in-Windows-Vista.html

    For now, the only 'solution' which is known to 'cure' this problem is to uninstall IE8 and go back to IE7.

    I hope this helps. Let us know if you need help.

  Dave D
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  Hi wwollmuth,

  I'm not sure from your post what version of Vista you are using or if you use the Viewer for Powerpoint as opposed to full Powerpoint (2003 or 2007?), but I can try to give you help to fix.

  For. Files PPS (Microsoft PowerPoint slide show)

  • Click Start, type regedit.exe and press ENTER
  • Navigate to the following branch:

  HKEY_CLASSES_ROOT\PowerPointViewer.slideshow.11\shell\Show

  • Click view , and then click Rename
  • Type the word Open so that the show is replaced with the Open command
  • If you have the PowerPoint 2007 Viewer is installed, repeat the steps above in this key, thus:

  HKEY_CLASSES_ROOT\PowerPointViewer.slideshow.12\shell\Show

  • After having changed from Show to Open, close the Registry Editor window.

  For. PPT (Microsoft PowerPoint Presentation) files

  • Click Start, type regedit.exe and press ENTER
  • Navigate to the following branch:

  HKEY_CLASSES_ROOT\PowerPointViewer.show.11\shell\Show

  • Click view , and then click Rename
  • Type the word Open so that the show is replaced with the Open command
  • If you have the PowerPoint 2007 Viewer is installed, repeat the steps above in this key, thus:

  HKEY_CLASSES_ROOT\PowerPointViewer.show.12\shell\Show

  • After having changed from Show to Open, close the Registry Editor window.

    For more information, please click on the following link:

    http://www.Winhelponline.com/articles/149/1/Unable-to-open-PPS-attachments-directly-from-Windows-mail-in-Windows-Vista.html

    For now, the only 'solution' which is known to 'cure' this problem is to uninstall IE8 and go back to IE7.

    I hope this helps. Let us know if you need help.

  Dave D
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Canon scan to folder (Server 2008 R2) from the latest Windows Updates (13 sep 2012) it doesn't work anymore...

  We have a few Multi functional Cannon, who were able to scan to folder to our file server 2008 R2 server.

  Since the latest Windows Updates (13 sep 2012) it doesn't work anymore...

  Nothing has changed for folders or shares. Actions are like:

  \\fs01\scans\IT

  Shared folder is \\fs01\scans

  Share permissions are full for everyone

  On the COMPUTER folder, only the service and the Canon scanner user have full conrol...

  When I turn off the firewall of Windows on the FS01, it works.

  Can I get a SMB = OK on the Multi functional.

  When I turn on the WIndows firewall, I get a SMB = NG on the multifuntional

  I checked the rules and everthing about file and printer sharing is allowed...

  Can someone please think about what to do?
  Because really don't want to go with Windows Firewall disabled.

  The Endpoint Protection 2010 Anti Virus is installed on the FS01, but given that disabling the Windows Firewall works, I don't think that the Anti Virus has nothing to do with it.

  Update: I tried two other servers 2008 R2 (with also the Windows Firewall on) and it works! So there's something wrong with this one server... But as far as I can see, the firewall has all the file and open sharing of printers of things... And when I connect with the Canon Scan on a PC user I can browse places very well.

  Hello

  "Update: I just tried two other servers 2008 R2 (with also the Windows Firewall on) and it works! "So there is something wrong with this one server.

  Microsoft has specific Forums to help you with your Server 2008 R2 questions.

  Could you please repost this link in Server 2008 R2 Forums.

  "Support for Windows Server 2008 R2"

  http://TechNet.Microsoft.com/en-us/WindowsServer/bb512923

  See you soon.

• Quicken 2009 crashes on startup after the latest security updates

  After you have installed the latest security updates (I think it was 10/01/2010) and tried running Quicken 2009, the program does not start.  It hangs at the boot image.  I tried to restart and reinstall the program (with available updates), but it still has not solved the problem.

  
  

  Any help is appreciated!

  The best would be to contact the Support of Quicken (Intuit). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Installed the latest important updates this morning; upon restart, the computer didn't work as expected. now behaves as if the motherboard is dead.

  This morning at appx. 1:30 AM PST, I installed the latest important updates from the Windows Update Manager on my HP Pavilion dv6000 laptop. I did manually, by a double click on the little icon in the toolbar and clicking on the button install. Once the update had completed, I clicked on the "restart later" button and close my computer using the Shut Down command - the usual symbol "click here to close and complete the installation" didn't appear. I thought it was a little weird, but chalked it up to the fact that I had taken the lead and made the installation.

  About an hour and a half later, after being able to get to sleep, I decided that I would try to do a job. I pressed the power button and my computer started well upward, giving me the ' now install, update (1/3) [percentage] completed. Do not turn off your computer. "message. Which is quite normal, let him do his thing without turning it off.

  The update is completed and I am greeted by my office. Displays the logon to Gmail Notifier window, and that's when my problems began: I tried to move the arrow to disappear, and the arrow has not moved. The circle of "transformation" had, next to the arrow, so I thought it must be a minor hiccup. I've waited, waited and waited... But even after all of my normal startup programs loaded, my mouse has failed.

  Pressing the Windows key to open the menu start does not work, either; It was as if everything had been disconnected. After waiting a few minutes, I decide that maybe I just need to restart and, given that my keyboard was not working, I pressed and held the power button until the system off (I know, I know, it's a horrible thing to do).

  I waited a minute, and then you press the power button. The lights came on, the fan spun, but the screen remains black as if I did nothing. I waited, because my computer arrived in the past tried to give me an attack of apoplexy by hanging several screens, but... nothing. The fan spun, the light shone their beautiful blue, but that's all.

  The only thing I have changed or done differently was the updates, I have not dropped my computer; I've not spilled something on or in I have a Targus chill mat that I use religiously. I download attachments from people I don't know no/trust (I can't, my antivirus program deletes attachments in emails from spam); I use Firefox with NoScript and anti-ad; My AV/Antispyware/malware program is always up to date and six types of awesome and more.

  My system is Windows Vista Home Premium on an HP Pavilion dv6000. I have an AMD Turion 64 x 2 processor and a Nvidia mobile graphics card (I don't remember exactly who he is; I can't the specs). I don't have a DVD of restoration, for reasons that did not need explores right now. I had my phone on... Two years, I think. I'll have to double check.

  I can't start in safe mode, because I get nothing - no POST, no beeps, without bumps. The CD/DVD drive makes some noises, as he is looking for a drive (there isn't one in the drive), and that's it.

  I think I have to take someone and make them open and see what's the problem, but I appreciate any thoughts/ideas/opinions/assistance that anyone can give. Thank you for your time and attention.

  Alas, no, the screen seems to be fine. He had not been acting funny before that, in any case. I checked out, and the external monitor just went to sleep because there is no signal.

  Thanks for taking a peek anyway. I guess it's a workshop for me and my laptop.

  Birdy

• Installation of the SP3 for XP now crush the latest system updates or interfere with programs like IE 8?

  In all other ways my XP system is up-to-date, with the exception of SP3. I never needed before. SP1 and SP2 have been installed at the time when they were new. Now SP3 is required to upgrade to some new programs. Installation of the SP3 at this late date crush the latest system updates or interfere with programs like IE 8? I don't want that my system is back to older parameters which are now outdated. If the system settings are changed, how do I know those who?

  No, this does not disturb.

• I can't install the latest windows update. My error code is 0x800706BE.

  original title; I can't install the latest windows update.  I used Microsoft Fix It and still not able to install the update.  My error code is 0x800706BE.

  System information:

  Microsoft Windows XP Professional

  Version2002

  Service Pack 3

  Dell Computer Corporation

  Dell Dimension DIM4300S

  Intel Pentium 4 CPU 1.60 GHz

  1.59 GHz, 768 MB Ram

  Internet explore 8

  Norton Internet Security 2011 (updated)

  Hi ScottCarter,

  ·         Did you do changes on the computer before the show?

  ·         You are trying to install updates?

  ·         Are what fixit you referring?

  Follow these methods.

  Method 1: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable the antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network at the time the anti-virus software is disabled, your computer is vulnerable to attacks.

  Method 2: Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  Method 4: Follow the steps in the article.

  How to reset the Windows Update components?

• The latest XP update has been installed. Machine will not start now. How should I do?

  Original title: Windows XP update killed my PC
  April 13, 2011, the latest XP update has been installed.  Machine will not start now.  How should I do?

  Thank you

  Them

  From the F8 Advanced Boot Options menu, were you unable to choose:

  Disable the automatic restart in the event of system failure

  Your system sounds like it restarts to determine what he complains and then someone can help you to repair.

  This is why there is a disable automatic restart on system failure option...

  There is another option in the menu F8 Advance Startup Options:

  Last good Configuration known (your most recent settings that worked)

  I do not think that this will help you, but you can at least say you tried it if someone suggests.

  MS products generally work as expected, but may not perform as desired or expected.  You can push that dog and make good the bark.

• After you have installed the latest Windows updates, Lenovo T60 laptop running Vista takes 30 minutes to start

  I have Vista Home Premium installed on a Lenovo T60 laptop. The machine is
  3-4 years.

  Although the system has never been quick to start, after the latest Microsoft
  update has been downloaded and installed, it now takes about half an hour to start
  the system of cold starts and 20 minutes from the sleep position.
  It also takes a long extra time to get the Explorer running

  What happened during the update may cause this extra on drag
  performance? How can I change?

  I tried the system restore, but it would allow me to go back only to the point
  When the MS Update has been installed.

  Thank you.

  HR Sirois

  Is your system error free?

  Event Viewer reports

  1. normally, when an error occurs on your computer looking in Event Viewer should be your starting point to find a solution. More related system errors are recorded and get an exact copy of the relevant report is important. Unfortunately, is not easy to understand reports and most of the users computer need help with their interpretation. I have to say later interpretation.

  2 Event Viewer includes three main newspapers of Windows. Here's the Application, security, and system. For purposes of troubleshooting system is by far the most important.

  3. to access the system log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window select Windows and the system logs. Place the cursor on the system, right click and select filter current log. Check the front of the error and click OK and see you only reports errors. Click the Date and time column header to sort. You may need to click a second time to see the last report above.

  4. a tip for posting copies of error reports! Run Event Viewer and double-click the error you want to copy. Click the copy button to place a copy in the Clipboard and close Event Viewer. Now start your message and paste it into the body of the message. Make sure that it is the first dough right out of the event viewer.

  5. He cautioned against three types of reports, information, and reports errors. In most situations, it is the error reports that offer the best information but sometimes WARNING reports provide useful clues.

  6. all reports have stamps date and hour and when troubleshooting, it is important to focus on the latest reports. Reports of studies from the point when the computer is started, and then check if a similar report appeared in the previous session. If errors do not repeat investigation as to why they happen is wasted effort.

  7. in the individual reports the most important information is the event ID and Source such as these help when looking for help on the internet. The description is just as important and copy the exact text to use as search criteria greatly helps achieve better results when using Google. Not paraphrase descriptions when other people asking for help.

• USB 2.0 drives not recognized since the latest Windows updates

  I tried 4 different USB 2.0 on 4 different and no computers drives won't recognize readers for the latest Automatic updates.

  1 PC with Win 7 64-bit all service packs

  2 computer laptop w / Win 7 32 bit all service packs

  3 laptop w / Win 7 64-bit all service packs

  4 desktop w / Win XP Pro 32 bit all service packs

  All versions are professional, all devices are fully patched and recognise the mouse USB, HD', other USB devices.

  3 of the flash drives are Sandisk Ultra USB 16 GB sticks, one is nine of its packaging.

  1 is a 8 GB generic to Symantec given as a promo, but it is brand new.

  All these discs worked in these devices before the last major thrust of update.

  There is no splat / exclamations in the Device Manager.

  If all the USB controllers are removed and reinstalled, it does not address the issue.

  Difficulty of MS it detects no problem.

  USB 1.0 drives work!

  None of these devices are equipped with USB 3.0 ports

  Hi Laurence,.

  Please keep us updated on the status of the issue and apologize for the lack of communication.

  As you mentioned that this problem occurred after installing Windows updates, then I would suggest you to restore your computer to a restore point that was created before the date and time when you started to notice the problem.

  To do this, please follow the steps from the following link:

  Restore system files and settings

  Note: When you use the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  After restoring the system, try to manually install the Windows updates (try to install one by one) to identify what update caused this problem.

  To do this, please follow the steps from the following link:

  Install Windows updates in Windows 7

  Hope this information helps.

  Please reply with the results, in order to help you solve the problem.

  Thank you

• Where is the latest version STABLE of Firefox?

  I want the latest version STABLE of Firefox. I'm not interested in the BETA versions. But Mozilla does a good job of hiding the last stable version and forcing the visitors into its perpetual Beta System unstable. Can someone tell me what version of Firefox is the latest STABLE version; and where can I find it? Thank you very much for your help!

  Hello

  The latest stable version can always be found at:

  • https://www.Mozilla.org/en-us/Firefox/new/
  • (complete installation) https://www.Mozilla.org/en-us/Firefox/all/

  Current stable version is version 33.1.1

• Satellite U400: Where is the latest graphics card driver

  I just checked on the Toshiba drivers and they are from 2008.
  Where can I get the new drivers that Toshiba has fixed a few bugs and a few changed with the colors?

  Here is mine it is old > 10/09/08 * Display Driver Intel Windows XP 6.14.10.4953 World Wide *.

  Hello

  On the page of the Toshiba driver, you will always find the latest driver for Toshiba.
  If there is no other driver out then this means that the other drivers don't exist.

  According to your assignment, the graphics chip is designed by Intel.
  Therefore, you can take a look at the Intel page for a newer driver for this chip version.

  Good bye

• where download the latest version free download of adobe reader and adobe flash?

  Dear all,

  Can someone tell where I can download the latest full version of adobe reader and adobe flash?

  I need a full version. Thank you!

  Kind regards

  Chris

  Installer for Adobe Reader offline: http://get.adobe.com/reader/enterprise/

  Installers for Flash Player offline: http://www.adobe.com/products/flashplayer/distribution3.html

• Where are the latest versions of downloads every night for mobile (or other non-windows) for firefox location?

  First of all, I ask because I noticed an inconsistency between Firefox nightly and releases of chrome. Firefox almost always exceeds chrome in versions of windows, but chrome is always newer with mobile and linux versions. What I'm trying to understand, that is if I'm missing any non-windows releases on the side of Firefox.

  I found the latest windows downloads at the following link:
  http://ftp.mozilla.org/pub/mozilla.org/firefox/tinderbox-builds/mozilla-inbound-win32/?C=N;O=D.
  These versions see here before they on the platform all catalogue here:
  https://tbpl.Mozilla.org/?tree=Mozilla-inbound
  Is this the case for other platforms, and, if so, are there available downloads of the similar time?

  It's because you are looking in the Firefox section when it's for desktop versions that the mobile Firefox is in the mobile section.

  http://FTP.Mozilla.org/pub/mozilla.org/Mobile/Tinderbox-builds/