USB 2.0 drives not recognized since the latest Windows updates

Similar Questions

• Canon scan to folder (Server 2008 R2) from the latest Windows Updates (13 sep 2012) it doesn't work anymore...

  We have a few Multi functional Cannon, who were able to scan to folder to our file server 2008 R2 server.

  Since the latest Windows Updates (13 sep 2012) it doesn't work anymore...

  Nothing has changed for folders or shares. Actions are like:

  \\fs01\scans\IT

  Shared folder is \\fs01\scans

  Share permissions are full for everyone

  On the COMPUTER folder, only the service and the Canon scanner user have full conrol...

  When I turn off the firewall of Windows on the FS01, it works.

  Can I get a SMB = OK on the Multi functional.

  When I turn on the WIndows firewall, I get a SMB = NG on the multifuntional

  I checked the rules and everthing about file and printer sharing is allowed...

  Can someone please think about what to do?
  Because really don't want to go with Windows Firewall disabled.

  The Endpoint Protection 2010 Anti Virus is installed on the FS01, but given that disabling the Windows Firewall works, I don't think that the Anti Virus has nothing to do with it.

  Update: I tried two other servers 2008 R2 (with also the Windows Firewall on) and it works! So there's something wrong with this one server... But as far as I can see, the firewall has all the file and open sharing of printers of things... And when I connect with the Canon Scan on a PC user I can browse places very well.

  Hello

  "Update: I just tried two other servers 2008 R2 (with also the Windows Firewall on) and it works! "So there is something wrong with this one server.

  Microsoft has specific Forums to help you with your Server 2008 R2 questions.

  Could you please repost this link in Server 2008 R2 Forums.

  "Support for Windows Server 2008 R2"

  http://TechNet.Microsoft.com/en-us/WindowsServer/bb512923

  See you soon.

• I can't install the latest windows update. My error code is 0x800706BE.

  original title; I can't install the latest windows update.  I used Microsoft Fix It and still not able to install the update.  My error code is 0x800706BE.

  System information:

  Microsoft Windows XP Professional

  Version2002

  Service Pack 3

  Dell Computer Corporation

  Dell Dimension DIM4300S

  Intel Pentium 4 CPU 1.60 GHz

  1.59 GHz, 768 MB Ram

  Internet explore 8

  Norton Internet Security 2011 (updated)

  Hi ScottCarter,

  ·         Did you do changes on the computer before the show?

  ·         You are trying to install updates?

  ·         Are what fixit you referring?

  Follow these methods.

  Method 1: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable the antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network at the time the anti-virus software is disabled, your computer is vulnerable to attacks.

  Method 2: Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  Method 4: Follow the steps in the article.

  How to reset the Windows Update components?

• HP TouchSmart 600: External Toshiba USB 3.0 drive not recognized on HP Touchsmart

  I have a desktop HP Touchsmart 600, and I bought a 1 to Toshiba external USB 3.0 drive and when it plug to the USB port, it does not, even tried the other port and restarted, but does not yet recognize, I tried to reload the USB Chipset, but no cigar. I am able to use it on my Sony laptop. I would be grateful for any help or suggestion. Thank you people.

  Hi @StevieB1,
  
  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, HP experts and other support staff. I understand that you have a problem with the external drive not being seen. I'll be happy to help you.

  Please, try the steps in Troubleshooting connections USB (Windows 7).

  I hope this helps. Please keep me informed of the progress of things.

  If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.
  To simply say thank you, click the Thumbs up below!

  Thank you.

• After you have installed the latest Windows updates, my Bluetooth stopped working

  I installed the last set of updates to the window and it caused my Bluetooth to stop working.  Reinstalled drivers from the dell website and it still does not work. Fact a restore point and devices have started working again. Updates were the only changes. No other programs or updates installed.
  What updates do interfere.

  Dell E6530, Windows 7 64-bit, Intel core i5, office 10

  Original title: bluetooth

  Are you set for Important updates only (which is recommended)?  If not, was an updated device driver?  It is best not to let Windows Update process device drivers.
  If you cannot reduce it any other way, you can try to install the updates again one at a time.  I have not heard about recent blue tooth switn of the problems Windows updates recently.

• After you have installed the latest Windows updates, Lenovo T60 laptop running Vista takes 30 minutes to start

  I have Vista Home Premium installed on a Lenovo T60 laptop. The machine is
  3-4 years.

  Although the system has never been quick to start, after the latest Microsoft
  update has been downloaded and installed, it now takes about half an hour to start
  the system of cold starts and 20 minutes from the sleep position.
  It also takes a long extra time to get the Explorer running

  What happened during the update may cause this extra on drag
  performance? How can I change?

  I tried the system restore, but it would allow me to go back only to the point
  When the MS Update has been installed.

  Thank you.

  HR Sirois

  Is your system error free?

  Event Viewer reports

  1. normally, when an error occurs on your computer looking in Event Viewer should be your starting point to find a solution. More related system errors are recorded and get an exact copy of the relevant report is important. Unfortunately, is not easy to understand reports and most of the users computer need help with their interpretation. I have to say later interpretation.

  2 Event Viewer includes three main newspapers of Windows. Here's the Application, security, and system. For purposes of troubleshooting system is by far the most important.

  3. to access the system log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window select Windows and the system logs. Place the cursor on the system, right click and select filter current log. Check the front of the error and click OK and see you only reports errors. Click the Date and time column header to sort. You may need to click a second time to see the last report above.

  4. a tip for posting copies of error reports! Run Event Viewer and double-click the error you want to copy. Click the copy button to place a copy in the Clipboard and close Event Viewer. Now start your message and paste it into the body of the message. Make sure that it is the first dough right out of the event viewer.

  5. He cautioned against three types of reports, information, and reports errors. In most situations, it is the error reports that offer the best information but sometimes WARNING reports provide useful clues.

  6. all reports have stamps date and hour and when troubleshooting, it is important to focus on the latest reports. Reports of studies from the point when the computer is started, and then check if a similar report appeared in the previous session. If errors do not repeat investigation as to why they happen is wasted effort.

  7. in the individual reports the most important information is the event ID and Source such as these help when looking for help on the internet. The description is just as important and copy the exact text to use as search criteria greatly helps achieve better results when using Google. Not paraphrase descriptions when other people asking for help.

• Cannot access Internet after installing the latest Windows updates

  Hello

  updated the last windows update and now can not access the internet even if I said I'm on internal appreciate any help in this matter.

  Have reset the laptop to an earlier date and no problem, but as soon as I download the update of windows, no internet access

  " Original title: blocked internet access"

  Hi Eugene,

  Thanks for posting your query in Microsoft Community.

  I imagine the inconvenience that you are experiencing and will certainly help you in the right direction to solve the problem. However, I would be grateful if you could answer a few questions to refine the question in order to provide you with better assistance.

  1. What is the type of internet connection you use - wired or wireless?
  2. Do you get any error message when there is no internet access?
  3. What is the number of KB of the update, after which the internet disconnects?

  [To view your history of update:]
  a. Open Windows Update by sliding into the right edge of the screen (or, if you are using a mouse, pointing to the corner bottom right of the screen, move the mouse upward), touching or clicking on parameters, typing or clicking on Change PC, then type or by clicking on update and recovery.
  [ b. press or click on see your update history.]

  The question could arise if the specific update makes changes in the Windows network properties and the update package has been damaged. Other important reasons include the firewall from the security software, third-party software conflicts etc.

  In order to diagnose the problem, I would suggest trying the following methods and check if the problem persists.

  Method 1:

  Method 1: Troubleshooting of connection Internet run.

  a. press the Windows key + W key on the keyboard.

  b. type Troubleshooting in the "search" tab and press enter.

  c. click show all on the left panel.

  d. click on Internet connection, will new popup window.

  e. follow the instructions on the screen.

   

  Let us know the results performing the Troubleshoot utility.

  Method 2:

  Reset the DNS and TCP/IP settings.

  1. Press the Windows key + X.
  2. Click prompt (Admin).
  3. Please enter the following commands and press ENTER after each one.
     NETSH INT IP RESET
     IPCONFIG/FLUSHDNS

  Restart the computer to check the issue.

  If the problem persists, refer to the following method.

  Method 3:

  Temporarily disable the security software and check if it helps.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most

  cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Additional information:

  Windows wireless and wired network connection problems

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• USB drive not recognized on the A30-151 in XP

  After a clean install of Windows XP Pro on a Satellite A30 151, a USB device remains in the category 'Other' (after installation of the graphics and audio drivers, modem) for which no driver seems to be available on the drivers CD. At this point, the category "USB" contains four entries, two standard "Universal Host Controllers" and two "OpenHost' controllers, with the default drivers.
  I suspect that the missing device can be a USB 2.0 "PCI controller host improved USB" from another manufacturer, but Toshiba does not offer a driver for XP for it then it should be supported by the OS (?).
  Any suggestions as to what can be and what drivers need?

  It turns out that XP does support USB 2.0 according to the SP1, it seems a pre - SP1 version of XP Pro leads the native Windows drivers is not available. For anyone in a similar situation, it seems as if a) upgrade to SP1 or b) install the hotfix Q312370)

  http://www.google.com/search?hl=en&q=Q312370_WXP_SP1_x86_ENU.exe

  for the English version should throw a lot of download sites) followed by the autodetection of the native Windows drivers should do the trick. However, the following SP1 problem may come into play

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/FAQ.jsp?service=EU&FID=TRO0000001c0d

  in this case, the "NEC PCI to USB Enhanced Host Controller B1" driver required original can be found by searching for "USB driver" for "Windows 2000" for the Satellite A30 Toshiba driver download page.

• Hard drive not recognized on the computer after the upgrade to Vista

  I just upgraded to vista a my ext hdd does not come in computer how to install human and format the hard drive?

  What's your Vista-compatible external HARD drive? http://www.Microsoft.com/Windows/compatibility/Windows-Vista/

  Have you loaded the proper drivers, firmware or software for the external drive and your version of Vista?  He can't just plug-and-play, especially if this isn't original USB key but a convert.

  Once it is recognized by the system (if it is compatible and once the drivers are installed), go to start / Control Panel / administrative tools / computer management / management of records and right click on the external drive that shows there or format to change the drive letter or a similar task.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• cd/DVD drives not recognized by the computer.

  Some full scans there is our operating system to xp does not recognize our 2 dvd/cd players after a full scan, by security essentials.

  We went into the control panel to check the cd/dvd drivers... and they were gone.  Then we went in the 'my computer' window, and neither one of them were there either.  It's like they were never there.  We can somehow reset something to collect, to use?

  Hello

  I see that the CD is missing on the computer.

  1. You did changes to the computer before the show?
  2. The computer is connected to a network?
  3. Is detected in Device Manager?

  Device Manager provides a graphical display of the hardware installed on the computer, as well as the device drivers and resources associated with this material. Using the Device Manager provides a central point to change the way the hardware is configured and interacts with the microprocessor of the computer.

  To access Device Manager, try the following steps:

  Click Start, click run, and then type devmgmt.msc.

  Note:

  Let us know the result.

  Now, you can read the following article and try the steps.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  Note:

  Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following articlehttp://support.microsoft.com/kb/322756

  If the problem persists, or you need help with Windows let us know.

• CD/DVD-ROM not recognized since the installation of Vista, without errors

  Installed Vista and lost CD rom? CD works can be heard during the execution but system will not find CDROM? Deleted upper and filters low but still will not find CD ROM?

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• CD/DVD drive not recognized inside the virtual machine

  No matter what I do, I can't get my VM (XP) to recognize the CD/DVD drive. I am running version 2.0.6 of merger and under Mac OS X (10.5.8) on a MacBook Pro. I did a right click on the CD icon in the lower right corner of the computer virtual window, then select 'connect' CD/DVD - I see while the disc turns black (which indicates it's supposed to be connected). I launch Windows Explorer in my virtual machine, but I do not see the CD/DVD drive listed anywhere! Help, please. I have the VM settings to connect to the physical CD/DVD (DVD-R MATSHITA UJ-875) drive. Thanks in advance.

  Take a look at: your CD-ROM drive or DVD drive is missing or is not recognized by Windows or other programs

• New HARD drive not recognized by the SAS on PowerEdge T410 controller

  One of the drives has failed on my RAID 1 configuration, so I bought a non-certified dell, Seagate Barracuda 500 GB drive (other readers were 250 GB).

  I turned off the machine and swapped the failed drive with a new one (cable connections)

  When I boot in Sas (SAS 6 ir) controller, it shows that the disk is missing.

  I turned off the server and changed the cables from the primary to the new disk, to see if it would make a difference. None. Watch again ' driving status: missing.

  What I have to buy dell certified readers? I'm doing something wrong? Or is the obsolete RAID controller?

  Any help would be appreciated! My primary hardrive gives signs of failure. I have a picture of him, but I'd like to get it mirrored on my new record ASAP.

  Thank you

  Hello director87

  Go to the RAID properties > manage table > manage Hot Spare disks. You should see a list of all drives that detects the controller. Your RAID 1 drives will be listed as primary and secondary. The new drive should not be anything in the area of the 'State of the drive. Use the arrows to select the new disk and keys to assign it as a spare drive + /. After you assign it as a spare drive it should start to rebuild.

  If you don't see the drive in the list, then check the screen of the SAS topology. If you see in the SAS topology then use CTL D to shoot to the top of the additional options. Let me know if it will allow you to do something to the reader in this screen. If you don't see in SAS topology then it does not appear that the controller is able to communicate properly with this player.

  Thank you

• Canon mp530 printer/scanner does not work since the latest version of windows update

  from the windows of the last update my printer scanner does not work. He says I have no installed printer. even if its there in my device list. Ive spoke at length with Canon support and they are sure it's a matter of windows.

  any ideas?

  Hello

  After windows update did you check in Device Manager is there any yellow mark on any driver?

  Go to the device by right clicking on computer Manager and manage

  Right click on the yellow camera brand > properties > details > click on description of the device > select hardware ID

  Let windows to be opened and take note of the VEN ID and DEV ID

  Go to the browser and go to Pcidatabase and put the VEN ID and see who exactly the driver required

  Look for the driver at Google or bing or other for a good

• Apple Apps Pro not usable since the last installed updates

  Greetings,

  On 19 December 2015 the following has been installed on my computer: 1) 2015 update security-006 version 1.0.  (2) Itunes version 12.3.2. (According to the App Store update page; this one was installed twice).

  Computer has begun to install updates automatically while I was working on a track. I chose to not not to allow the computer to restart and led updates to continue at a later date.  I finished work, off the Mac til the next morning.  When I tried to work, suddenly LPX operates now that it has a weight of 1000 live births by dragging it down.  CPU and HD m remain lit all the way to the top and take a long time to calm down.  Sound level meters don't update in real-time and data audio and midi will be properly synchronized.  I hear a blurry/airy sound on the left stereo channel (it looks like warp any) during audio playback as well. Tried rebooting, shutdown/restart etc... Disk utility says no problem detected.

  Any thoughts?

  BOE

  Logic Pro X, OS X Yosemite (10.10.5), Symphony TB 16 x 16, ExpressXT Midi

  Make a backup using Time Machine or a cloning program, to ensure that data files can be recovered. Two backups are better than one.

  Try to set up another admin user account to see if the same problem persists. If back to my Mac is enabled in system preferences, the guest account will not work. The intention is to see if it is specific to an account or a system wide problem. This account can be deleted later.

  Isolate a problem by using a different user account

  If the problem is still there, try to start safe mode using your usual account.  Disconnect all devices except those necessary for the test. Shut down the computer and then put it up after a 10 second wait. Immediately after hearing the startup chime, hold down the SHIFT key and continue to hold it until the gray Apple icon and a progress bar appear. Startup is considerably slower than normal. This will reset some caches, forces a check for directory and disables all start-up and connection, among other things. When you restart normally, the initial restart may be slower than normal. If the system is operating normally, there may be 3rd party applications that pose a problem. Try to delete/disable the third-party applications after a reboot using the UN-Installer. For each disable/remove, you need to restart if you do them all at once.

  Safe mode - subject

  Safe mode - Yosemite