Where is the connector on the card reader on the motherboard of the Aloe (p6777c)?

I removed my Pavilion p6777c motherboard to add a secondary market of the cooler and reconnected all cables going to motherboard except the card reader cable.  I find no documentation indicating where the card reader cable connects to the motherboard Aloe.  Connector 4-pin fits on the bottom 4 of a USB connector pins, but if it connects to one I do not know which.  Any help is appreciated.  Thanks, Jeff

Please see diagram below;

^                              ^

^                              ^

^                              ^

The card reader can plug into one of the ports labeled USB5, USB6, USB7 USB8.

Tags: HP Desktops

Similar Questions

  • card reader plug on motherboard

    I replaced the power supply and motherboard on my Pavilion m7480n and everything seems fine except that I can't find the place to plug in the memory card reader. Can you halp?

    http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&ObjectID=c00590499

    Above is the page on the phones in your system, I think.  In the lower right corner of the motherboard diagram and the photo is a 7-pin connector marked FPANEL, for front panel, which should be what you want.

  • CR504U2 card reader

    Hello.

    I have windows 7 on my current computer (GA-g41m-es2l)

    I found completely decomposed dx2300 microtour format (it has been run by forklift, I guess) and it was mainly trashed.

    http://h18000.www1.HP.com/products/QuickSpecs/12668_div/12668_div.html

    The one I saw had a CR504U2 card reader, so for the intact part, I took it home.

    I connected on the PC which ran from Puppy Linux to test, just to test, and it worked without any problem. 8 gb sd? with 256 MB of CF? and 1 GB MS pro? > absolutely no problem. the usb connector worked.

    So I plugged on my GA-G41m-ES2L:

    I unplugged the pannel x rear usb 2 which was related to F_USB1 (while F_USB2 was connected to the front, irony?). This Panel has been fully occupied, but as I had enough room for USB keys on my motherboard, I took this off.

    Then I inserted the card reader and plugged into F_USB1.

    And it is where all problems begin.

    Card reader runs the USB connector (which is simply a bridge of motherboard), but it doesn't read ANY card.

    With any, I mean simply none of this. not right this FC, no MS pro, SD

    I searched all along, I don't seem to find a driver at all, there is no disc in my disk manager or device manager sees it as hard drive.

    Anyone have any suggestions what to do? It seems strange that Puppy linux recognizes and works with her all the time, so that my windows 7 on ga-g41m-es2l don't.

    (PS Yes, integrated connector will symmetrically 5V - D-0 - D + - and in the other line his 1NC.)

    Detective Conan.

    It really boiled over in my head today, so I took out of the box, unplugged the card reader, started the system, connected, plugged.

    Recognized card reader and work. (!!)

    Still have no idea why na plugged not run when everything first, but at least it works!

    Thanks anyway!

  • Satellite M70-375: where to find the SD card reader driver?

    Where can I find the drivers for the SD card reader? It is not in the list of all the drivers of the M70 series.

    I checked the s information about this device and it seems that the Satellite M70-375 has a number PSM70E-xxx.
    First you must choose the category good pilot because there are two sets of Satellite M70.
    In addition there is no own available SD card driver. You must install the driver cardbus.
    This driver is also responsible for the use of the SD card.

  • I installed my USB 2.0 card reader, but I can't find the pictures from my Nikon camera, where can I go?

    My card reader USB for my SD card has a file name? or pictures come up to the high slot "my computer information" if so where? I don't know where to find pictures.  They just don't pop up on the screen, as they do on another computer.  My son is deployed in Germany and I'm using his computer to microsoft. I want to e-mail photos of his 5 daughters for him. It lacks a lot to them, but I get lost in this computer stuff.  Help, please.

    Open computer on the desktop and click on one of the letters (relative to the reader). See who opens with the pictures on it. If any of the letters display pictures, the problem may be that the player does not support cards SDHC.

    And the memory card in the camera is SDHC. If this is the case, you can buy a player that supports the SDHC

  • Where can I find the driver of USB memory card reader software?

    Where can I find the driver of USB memory card reader software? I checked on hp.com, but he's not here.

    I use the HP Compaq dc7800 Small Form Factor and Windows 7 Home Premium SP1 x 86 and p/n: AQ532US #ABA

    Hello

    You can ask HP support and in their forums. Maybe it's an older driver still used or HP
    is wrong has not posted.

    This is the Realtek site, but he could not be there.

    Realtek - downloads
    http://www.Realtek.com/downloads/

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • Investigation where the card reader to insert into the slot PCMCIA or ExpressCard zd7000 theHP

    I would like to know if I can get a player for this HP zd7000.  It is old, but I like his fluid moves with the mouse.  Thank you.

    Hello

    Based on the following specifications, your machine does NOT have a slot for Express card, only 1 free slot for CardBus or PCMCIA card:

    http://www.CNET.com/laptops/HP-Pavilion-zd7000/4507-3121_7-30557633.html

    Have you thought about using USB card reader? Alternatively, you can use something similar to:

    http://dx.com/p/laptop-PCMCIA-5-in-1-card-reader-SD-MMC-SM-MS-MS-Pro-23720#.UtsXzrR9LDc

    Kind regards.

    Uopdated: I think that he already has a card reader

  • Satellite A100 - need a driver for the card reader

    I have a Satellite A100 and recently upgraded from Windows Vista to Windows 7 and my card reader does not work, could someone please help as to where I can get one please.

    Katie

    Hi ktwilko,

    All the drivers and tools can be downloaded from the official website of Toshiba:
    http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers
    * Archive * > Satellite > Satellite a series > Satellite A100

    If you can t find a Windows 7 driver, you can use the Vista driver. Most Vista drivers work also on Windows 7.

    Check this box!

  • Re: Can not find the driver for Satellite M70-340 SD card reader

    Hello
    I have a Toshiba Satellite M70-340
    I want to install the SD card reader driver but on the product page after the selection of search criteria:
    Sorry, we couldn't find the drivers corresponding to your search criteria.

    -Toshiba Satellite M70-340
    -win xp 32 bit
    -flashmedia controller

    device, the name of the seller: 0 x 8033 Integrated FlashMedia Controller 0x104C Texas Instruments

    Where can I download a driver for this device?
    Please email me if there is no solution: ghjkl_ at freemail dot hu
    THX

    Have you installed Cardbus driver version 2.0.0.1?
    If you have made new and clean OS install it according to the installation Instructions of Installation documents please.

  • Satellite M40 - SD card stuck in the SD card reader

    Hello!

    I have a Satellite M40 and today I had the bad idea to use the Toshiba SD card reader.

    I inserted the card into the slot and he's going to profoundly inside. Try to get only back further by pushing.

    Now the cards is aprox. 2cm inside the slot and there is no way to get it out.

    This must be a joke. Please tell me where the secret button should get out of this card here. I let it go, really...

    Thank you
    Fritz

    Hello

    As much as I know Satellite M40 has no SD card but media slot and it supports various media cards. Of course, you can not use all the cards available on the market but only supported formats.

    Zim wrote very good explanation of how it works. Of course, with compatible cards only. Issue described can't happen with a SD card. It is too big and may not come 2 cm inside the slot.

    I'm afraid that you have used the mini SD card. Am I right about that?
    This card cannot be used without an appropriate adapter.

    Bad thing is there is no secret button. :(

  • I just put in a new hard drive in my computer and now my sd card reader slot does not work. How can I get my computer to read the SD card?

    Computer crashed

    New hard drive in my HP laptop

    Computer is not reading my SD card

    Hello

    Make sure the SD card works on other computers.

    The card reader is a USB device to ensure that other USB devices work.

    Check with HP, their drivers support and documentation online and ask in the forums of HP where it
    others will be with the same or similar model. I hope this is just the driver. It is possible that the device has been
    back not connected properly or even damaged when installing the new hard drive.

    Support HP & drivers
    http://welcome.HP.com/country/us/en/support.html

    Contact HP
    http://welcome.HP.com/country/us/en/contact_us.html

    HP forums
    http://h30434.www3.HP.com/PSG/

    I hope this helps and happy holidays!

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • HP pavilion slimline s5220y: the 6-in-1 card reader combo - headphone and microphone ports usb plug

    where can I buy a combo of 6-one - with ports usb memory card reader and headphone and microphone jack. I can't find any place that has always part

    Goodrock, welcome to the forum.

    Because the computer is almost 7 years old, I don't think that HP will have parts.  In my opinion, your best option is to buy an external card reader and card internal with USB ports.  Headphone and microphone sockets will be difficult to replace, or not at all.

    Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

  • 8460p: keep the smart card reader attached, even if the card is removed

    HP EliteBook 8460p

    Win 7 Pro 64-bit

    When a smart card is inserted, you are able to see your smart card reader in Device Manager. When you remove your card chip, the chip card reader disappears in Device Manager. Is it possible to always keep the smart card reader attached?

    According to the BIOS version (F.22) will there is a fix where you can set the power state of the smart card reader:

    '- Fixes an issue where the setup of BIOS (F10) does not display the power of smart card Options once the system is restarted. -Fixes an issue where rebooting the system (reboot) is slow after the modem is turned off in the configuration of the BIOS (F10). »

    But this isn't the case to find.

    Any suggestions?

    Concerning

    F27 BIOS and the new card reader is needed to solve this problem.

    old player = v1.20

    new player = v1.21

    /paasen

  • Memory card not seen by Windows XP computer using the USB card reader portable

    I use XP SP2 and have recently had a problem where my laptop does not recognize a card of memory a camera when the USB card reader is connected. It automatically launch an Adobe image management application, but I think that the operating system would still see the USB card reader.

    Hello BSW58,

    Thank you for your message.  We will try to take a look at your AutoPlay settings.

    Plug your camera card.
    Conclusion Adobe once it opened.
    Click 'Start' > click 'my computer '.
    Right click on your card > select ' Autoplay > Adobe is listed as default application?  If so, you can change it here.

    Please let us know if it did or did not help to solve your problem.

    Soon Jason Microsoft Support Engineer answers visit our Microsoft answers feedback Forum and let us know what you think.

  • Must restart to use the SD card reader

    Often, the card (pre-installed, internal) flash on my HP Pavilion reader refuses to recognize SD cards when I plug it into its slot. The only solution I've found so far is to reboot Vista.

    Don't know if it would occur with other types of memory flash as I did not test it with. The external USB ports work fine with readers flash USB, printer, etc. so the problem seems to be specific to the card reader and is not a generic USB problem. Other debug info:

    1. I have 2 SD cards. Both work 100% fine in my digital camera.

    2. the USB connection and contact card reader seem ok.

    3 device Manager says that all my USB-associated drivers are up to date.

    Do not restart to solve a hardware problem, so I figure it's a driver or a matter of Vista. But I'm not sure where to go from here.

    I got "the update does not apply to your system." (And FWIW, Windows Update says "Windows is up-to-date" and I have daily automatic update enabled.)

    However, I have noticed a few related "what others are downloading" updates, which has successfully installed. (I have them below list reference of others.) The 3rd is USB driven.) I rebooted and you have tested on and off for a few hours now, and the problem has not recurred. If things remain that way, I'm going to 'mark as answer.

    Thank you.

    1. Update for Windows Vista (KB938194)
    2. Update for Windows Vista for x 64 (Kb941649)
    3. Update for Windows Vista for x 64-based systems (KB941600)

Maybe you are looking for

  • SERIOUS HELP NEEDED: How to prevent an application to communicate with the internet?

    Hey guys, I use an application called VLCStreamer on my iPad and I just want to know how I can help but communicate with the internet. For example, I don't want VLCStreamer to be contacting the author of the application. Thanks for any help!

  • Loptop drivers

    Hello, I have HP Compaq 15-h000sa Loptop, and I can't find these drivers for Windows 7 x 64 Ethernet controller PCI\VEN_10EC & DEV_8136 & SUBSYS_21F7103C & REV_07PCI\VEN_10EC & DEV_8136 & SUBSYS_21F7103CPCI\VEN_10EC & DEV_8136 & CC_020000PCI\VEN_10EC

  • problem setting daq virtual channel to PCI-6229

    Hello I have trouble to set up a virtual channel to PCI-6229.  It comes to LABVIEW 7.1.  I am updating a VI in LABVIEW 6.1 to 7.1.  When I go through the Assistant of MAX, I get it configured how exactly it is about the version of LABVIEW 6.1, but th

  • WRT54GS not happy with Windows 7 (or it it me is unfortunate?)

    Sorry, but it's long. For me everything has begun with a win 7-32 update.  I was fortunately wireless for years with Win XP.  I replaced the router modem (now CM100) (now WRT54g2 v. 1.5.01), adapter (now WUSB54GC v. 3, but old WUSB54G v. 4.3 seems cl

  • Updated my Windows 7 to Windows 8.

    Can I still use my windows 7 on another computer? Or is the product key always the same?