Where is the Planner in the solution 3.3.003 lenovo Center?

Similar Questions

• Where are the Solution Center shortcuts, and how to use the (Scans)

  A frustration more than Windows 8 to get more than

  I have attached my C3180 to my new Windows 8 machine and the software installed.  It is running, but I'm a bit lost in the use of the center of Solution that seems different from what I had on XP.

  1. the only way I could see to change the destination of a scan, has been to create a new shortcut with the destination I want to use.  Is this correct?

   

  2. now that I have a short cut, where is it? When I run a scan from the Solution Center, the analysis proceeds to the default destination, so it must use the default shortcut.

  Is it possible to use the start scanning on the home of the solution Center window and make the scan go to my choice of the destination folder?

  Quit smoking research

  I found how to use the solution Center in Windows 8 here.

• OfficeJet 5610xi: cannot open the solution (used to scanning!) Center

  Update Windows 10 yesterday and when I tried to scan a document, that the Solutions Center has emerged for a fraction of a second. I have uninstalled and installed the latest driver of full version. When I place a document or try and open the solution Center I hear the critical stop. It prints, but have no idea of what's going on?

  Do not use for anything but scan!

  Help!

  You are a GENIUS!

  I certainly enjoy!

  Took me awhile to find the update of Windows, but I did it!

  I use Firefox and Google Chrome so I hope that the security warning has not touched me.

  I guess Microsoft will have an update I just uninstall to fix the problem, I had?

• Where can I find the solution to the error of upgrade

  I have Microsoft Vista and have tried to download updates, but get code error ther "WindowsUpdate_0000064C" "WindowsUpdate_dt000"  Where can I find the solution for this error?

  ElizZ, try the following steps to repair your Windows Update agent:

  Click Start, type Notepad in the start search box, and then click Notepad in the list programs.

  Copy the following text, and then paste the text into Notepad:

  net stop wuauserv

  net stop bits

  net stop cryptsvc

  Ren %systemroot%\System32\Catroot2 Catroot2.old

  net start cryptsvc

  Ren %systemroot%\SoftwareDistribution SoftwareDistribution.old

  regsvr32 c:\windows\system32\wuapi.dll

  regsvr32 c:\windows\system32\wuaueng.dll

  regsvr32 c:\windows\system32\wucltux.dll

  regsvr32 wups2.dll

  regsvr32 c:\windows\system32\wups.dll

  regsvr32 c:\windows\system32\wuwebv.dll

  net start bits

  net start wuauserv

  net start Eventlog

  output

  Click file, click Save as, and then type Repair.bat

  In the file type box, click all files (*. *).

  In save in, click Desktop, and then click Save.

  On the file menu, click on exit.

  Right - click on the Repair.bat file that you saved, and then click Run as administrator. This action starts the required services. If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  Try again to install updates. If you install the updates, delete the file Repair.bat. To remove the file Repair.bat, right-click Repair.bat, click on remove and then click Yes.

  Rami
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Where can I download the Solution Center software?

  When I try to scan a picture, I get the error message "an internal error has occurred."  I am advised to reinstall the Photo and imaging software.  I don't have the CD and try to locate the Solution Center software online.

  You're welcome =]

  Follow the link below, then select your operating system (open Control Panel > system to check if you are not sure)

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us & dlc = in & lang = to & lc = in & product = 390328 &

  Open the category drivers, then follow the download link.

  Do todownload software feature complete.

• Where is the location Planner log file?

  I'm trying to track and diagnose this error in my calendar/burst:
  
  Error! Unable to deliver the output for channel of delivery: e-mail.  Check the log for details of the error...
  
  But my entire drive a search reveals no any file with a .log extension that has been updated recently, or see a reference to the location of this log file anywhere in the documentation.
  
  Where is the log file that this error message is referring? Run the Suite of OBIEE 10.1.3.4.1 under Windows.
  
  Thank you!

  Hi Mthompson,

  Look at this on the way to create the log file.
  http://winrichman.blogspot.com/search/label/xdodebug

  sure, you have not created the mail/smtp configuration, that's why you see this error.

• Yahoo mail display - action buttons like response, delete, before them and the colors are not displayed. The solution to "clear the cache" does not help.

  The foregoing summarizes. Guests for action was now small boxes with a number and a letter of the alphabet. I used the "empty the cache" and solutions "allow pages to use their own police." neither one worked. This figure includes re-start after that I tried the solution.

  You have the problem where rectangles appear with two rows of two characters in them? This can happen when Firefox cannot display a custom font to view icons.

  Could check you if you allow sites to use their own fonts?

  the button Firefox orange (or the Tools menu) > Options > content > "Colors and fonts" section > advanced

• All-in-one Pavilion 23 23-b034: 2 try to install the solution Center HP for printer HP Pavilion has failed. Screenshots

  I had to do a cover of the factory recently. I can print with the HP C7280 programs smoothly. I got this printer and the solution Center works on this pc before the resumption of the plant and another pc before that.  I tried to install my printer HP all One Printer Solution Center now twice with today fails. I hope that the help of screenshots.

  I 1) downloaded a complete new installation - 2) off all antivirus - 3) restarted and restarted the printer HP - 4) the fact that all windows updates have been applied for windows 8.1 - 5) tried after the provided HP solutions but always with failure. Installation all the way to the final "device configuration"... and then expires. Thanks for any help.

  

  

  I ALWAYS KUDO AND MARKED RESOLVED. It is THE RIGHT THING to DO... doncha know. «  :-D
  Find thumbs upward, then click on to a KUDO
  Look to the right and see the OPTIONS to mark ACCEPT as a SOLUTION. Thank you!

  RnrMusicMan: (btw, former musician of Navy for this purpose) I need to send thanks a lot for your answer. I have tried, almost to the point of questioning my sanity, too many times tried too many things and all have failed. Why not go and buy a new printer? Financial considerations. Here's what I've worked with... (finally a good result there, at least the best I know for the moment at the end)

  (1) start here, I have an older HP all C720 printer wireless. I do not think at the moment there is a download of the full version which will allow him to install it in a machine of 8.1. An 8 machine if necessary, but not a 8.1 I do not...? That's what I gathered. Where I made my mistake, so, I was this old horse to battle C7280 installed on my newer HP Pavilion and worked very well with 8.1, (read on before thinking 8.1 work with the C7280) when I say great worked, I mean the Solution Center has worked. Then after a while I improved the Pavilion to 8.1 and everything was fine. A couple of weeks, I had to do a cover of the plant on the HP Pavilion. Instead of installing the software of the printer with the center of solutions right then while he was still an OS 8, I upgraded to 8.1 Loaded my favorite of all the programs and tweaks and tricks. Then I said, I'll install the old workhorse C7280. It would not, not at all, regardless of how many tips I read here, and Googling. Then I tried to install the full version of XP on one of the XP machines. No go. Something I said is prevention. Who could know. I tried to purge the XP what I knew could be related to HP. Shut off all antivirus programs, download fees, etc. etc. ad naseum. I have read and read and tried and failed and failed. You get the drama.

  So, I decided that if I could get it on the Acer Aspire one Netbook I could use as a slave, small sorta Acer server. I barely use the netbook anyway. So I couldn't do. Frustration. So I decided JUST ONE MORE ATTEMPT. And here's what I did for Acer.

  I did a factory restore. No former antivirus autour. Nothing is added. Presitine and already had Service Pack 3 with the resumption of the plant.  What follows I have none to little idea of his touch, but that's what I did.

  (2) I have an old modem that I had used as a slave of my new modem D-Link. I got it, because many of my devices will not work on the new 'n'.  I think, old modem old printer, old BONES. I have set the printer to get the old o SSID of the slave and agreed which has no password. Fortunately, I know anyone personally that could use this wireless slave and they all have their own.

  (3) so once again, I downloaded the full version of XP on the netbook. Extracted, he ran, and so he went the full installation and works.

  That's a lot, but I'm a cheap guy who hates to throw even if old devices, good. I use this Chrome extension called Extension Office remotely in order to get on the netbook from any computer and print using the Solution Center.

  I don't know what I did but I know I've worked. So this is my solution. I'm sure some could find another work around, but probably way above my paygrade.

  Once again, thanks a lot for taking the time. I think I followed your solution several, much too long and did not work. Unless I was always doing something wrong.  My solution was radical but it works for me always try to use these appliances. I just take good care of them and they last. My most recent is the HP Pavilion and it's going on 2 years now.

  Differences or questions please ask. 'Jack :-{D '.

• I FOUND THE SOLUTION FOR THE TX WIRELESS PROBLEM!

  Hi guys,.

  IM pretty happy problem because I found the solution for my tx 1219 us wireless!

  First of all, my laptop started with wifi problems. Then, when I tried to start, nothing has been posted.

  I read a lot of posts on forums that talking about changing the motherboard by HP.

  I sent my knees to HP in Argentina - where i live - and they had sent me a budget with a «renewed» system map

  I was paying, so I pretend a new.

  Tired and frustrated on the HP customer service: they dosen´t recognize their mistake. They dosen´t give me GUARANTEE AND they pretend a lot of money for something refurbished!

  I found a post where a guy - now away for me is 'God' - explains how to fix this problem yourself! AND a lot of positions where other guys did, and they confirm that it works!

  Here's the method. Feel happy!

  This post is for the repair of the range of following HP laptop: tx1000, dv2000, dv6000, dv9000, with AMD processors and graphic chips from nvidia (6150go).
  Symptoms are more, wireless wireless card are running out, are repeatedly, the laptop, it does not ignite until several attempts and finally the laptop turns on but he did not have no image in the monitor, in some models, you listen to some sounds.

  The cause is excessive overheating of the GPU from nvidia, which has powered up to 100 degrees or but tends to fail the welds that unite it to the mother of the card.
  HP already admitted the existence of the failure in the design of the card, and extended 2-year warranty, so that if even you can demand but the desirable thing is to do, the method I describe is simple and has worked in 100% of those laptop with this problem, prefer all must do it under your own risk.

  Step 1. -It is necessary to compile the necessary material: this is a 1-cent American copper currency or a currency that similar thickness now about a 1/16 of an inch, or a piece with these features, but the copper. also we will need a table lamp with a halogen centre, or the one with the normal centres but it is 150W or but case is that it heats up a lot. disipadora thermal paste of what they take microprocessors (sold at any electronics store).

  step 2. -Once gathered our components, it is necessary to remove the mother card and remove the radiator so that they are exposed to the microprocessor and the nvidia chip.

  Step 3. -Now, we are committed to the lamp, started to warm up a while, in my case I have tapeworm a gun to measure temperatures and saw that it was 134 degrees, once it is hot we close set, but the thing at latest, the graphics chip, but on the other hand, where all the solder points are seen We leave about 5 minutes, which were both that I gave him, no doubt, it can be less, depending on the source of heat, once that done this we have pressed with the fingers with force the graphics chip (care, it will be hot), which will be expanded by heat welding is to merge.

  Step 4. -Now, we put a little disipadora in the room by both parties and we placed on the graphics chip and put the radiator and arm!

  It is with the intention of wrong correct dissipation system design since the heat produced by the chip is transferred to the coin in copper.

  Copper is an excellent conductor of heat and thus provide the heatsink of makes, initially was clearly a very small between the radiator and the chip and when warm itself does not transfer not warmth to any party since not thanks to the air, it can, but the copper coins made this work

  Greetings

  Message edited by Wendy on 30/04/2009 21:02

  Please see the procedure on YouTube

  http://www.YouTube.com/watch?v=musu759LsT4

  Message edited by Wendy on 30/04/2009 21:02

• With the solution Center HP can magnify an already scanned photo?

  I have Windows 7 and the HP Solution Center.  I have already scanned photographs and would like to know if I can expand or otherwise alter these photos using the Solution Center and if so, is there simple instructions anywhere where I can get my hands on?

  Problem solved.

• where is the wallpaper of graphic files located?

  The place of 'repair' who 'fixed' my computer added a bunch of pictures that I want to DELETE my "Properties" and I also want to add files customized for the wallpaper.  Where are the files located on the C drive?  They have not yet found and to tell you the truth, just can't remember where they are.  : )

  I don't think that this place of the computer's real competent...  I don't want to take my office back in there for this problem, I think I can fix my own.  I built this 'thing'!

  Thanks for any help/comments/hints/instructions that you have!

  Katie

  Hello 1Startdancer,

  My apologies. I assumed (wrongly) that the photos had been stored in the folder of wallpaper. It seems that the repairman took pictures "as wallpaper."  To do this the photos must be stored in the folder "photo". If you already have other copies of these photos elsewhere the best solution is to delete all those photos in the folder "photo". Once you've done that, go into display properties (right click on the desktop and select Properties, and then in the Properties window, select desktop). Once you see the list of wallpapers, select one that naturally belongs to Windows (do not select one of the photos you want to get rid of that) and then click on apply. Once you have selected a windows desktop and the desktop has refreshed, close display properties and then open the properties of display again. Photos that you removed should be now is no longer there.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• Tempting desperately to open the Dimension E521 CD-Rom drive does not open. Anyone know the solution?

  I tried all the solutions given by the computer itself nothing doesn't.  It seems that it will open up and then stops.  I have the green light as I usually do, but it flashes not stable.  I really need to use this player.  There is nothing in the drive to get stuck.  Is that someone out there has had this problem and how they solve this problem?

  First of all, try to open Windows Explorer, click right on the optical drive icon and select eject.

  Another option is to hold the eject button in (gently) in electric biking your system.  Take your finger on the button the moment where he begins to open.  In addition, you are allowed to try and hold the drawer open if she tries to close the bottle.  There are generally micro-switches that detect it and put an end to the attempt to close the plateau or the door.

  You can also get the emergency eject hole somewere around the door (sometimes under a bezel).  It should work with the power on or off, but I do it with the power turned off.  (Paste a conductor in a piece of electronic equipment of power on seems a recipe for disaster to me.)  The hole is the diameter of a large paper clip (the favorite :) tool.  Succession the wire out and push to the right .  There should be some slight as resistance it UN-engages the latch and starts sliding drawer open.  At this point, you should be able to get out the drawer/tray by hand.

• where is the fingerprint reader for a laptop of HP TouchSmart tx2-1025dx

  where is the fingerprint reader for a notebook PC HP TouchSmart tx2-1025dx help please

  Hernandezeric2, welcome to the forum.

  Here is a guide that has a video on how to configure the fingerprint reader.  It should show you the location of the reader.

  Please, click on "Thumbs Up +" if I helped you and click "Accept as Solution" If your problem is resolved.

• Cannot install the Solution Center in Windows 7 for HP7310

  I have a HP7310xi AIO that works very well until recently.  I've recently updated Win/XP to Win 7 32 bit and the printer software will not be installed correctly.  I downloaded and tried all the diagnostic tools that I can find on this site, nothing helps.  I can print but cannot scan due to lack of Solution Center software.  I want this to be a device connected to the network and part works very well with the printer, but I repeat, it will be no scanner - is network or USB accessory.

  I downloaded (several times) the file of the AIO_CDB_Net_Full_Win_WW_130_141 software, which is supposed to install the necessary software, but IS NOT INSTALL the Solution Center.  I tried HPPIW for installation and also HPHNDU and HPPDU for the diagnosis of the printer, and who work very well.  I also tried HPPSdr (who works for the printer, but not scan) and HPSDU, which does not at all.

  I still have my original installation CD and I tried, but of course it does not work with Win 7.  I also tried to uninstall the entire software package and then try to re - install, also without success.  It seems that the uninstall process is incomplete, or at least that's my guess.  I tried running also uninstall batch since the original installation CD files (the files to \util\CCC\Uninstall, Uninstall_L1, etc.) and they seem to work, but still the re - install subsequent does not install Solution Center.

  I recently ordered the customers a new installation CD, expecting a full installation CD for Windows 7 and receive.  The label of the CD says it's for "HP Officejet 6300, 7200, 7300 all-in-One-series", and also that it is "Version 13.1.0" and "Windows 7" and "Multiple languages"  It is the number of piece CB744-10003 and seems to be exactly what I need.  HOWEVER... This is ACTUALLY ON THE CD!

  Usefully, the label gives the following instructions:

  Insert the CD in your CDROM drive

  All Windows operating systems:

  (a) click on 'Start' in the task bar, then click on 'run '.

  b} type d:\Setup and click OK (where "d" is your CD drive letter"

  This is exactly what I expected to see on an installation CD; BUT there is NO "SETUP" FROM THE CD FILE!

  The content of the CD is exactly TWO FILES:

  AIO_CDB_Net_Full_Win_WW_130_141.exe, and

  AIO_CDB_Net_Full_Win_WW_130_141.MD5

  The first file is the same as I've downloaded several times on your website and many, tried several times to install.

  THIS CD DOES NOT CONTAIN WHAT THE LABEL SAYS WHAT IT SHOULD CONTAIN.

  I spent a lot of time on the phone with 'Technical Support' (telephone number 1-800-474-6836) and just got a huge evasive.  The best suggestion they could offer was that I should 'upgrade' my printer!  I know the printer is old, and I know that the printer itself is not supported.  However, I expect better than that of a software package that is supposed to take care this device on Windows 7 AIO.

  If I can't get this resolved successfully, I'll upgrade my AIO - but it WILL NOT BE ONE OTHER DEVICE HP!

  Hmm...  I have an Officejet 7410 similar, I used the same configuration file to install and have used it for a few years on my Windows 7 system.  A few questions:

  You have the printer connected by USB or network?

  You said that you had upgraded to Windows XP.  Was this a clean install on the XP machine?

  Are there any error messages during installation?

  There are a few things to try: If the printer is connected with USB, unplug it before you continue.  Navigate to the folder folder (open the Explorer and folder type in the address bar), look for a directory starting with 7z and a date corresponding to when you tried to install the printer.  Go to the util/ccc directory in the 7z... directory and run uninstall_L3, uninstall_L2, and uninstall_L1 files.  (This is the program of uninstalling the version of Windows 7, it might be more effective than the XP uninstall program).  After you run each file three batch restart the computer and log in as a user with administrator privileges.  At this point, run the Setup program.

• Under Xp, under the paper painted office, where are the pictures actually stored... I want to add a picture to the file in order to make my wallpaper... It seems that some are stored on the c: Windows and some in C:Window/Web/Wallpaper...which is right

  Under Xp, under the paper painted office, where are the pictures actually stored... I want to add a picture to the file in order to make my wallpaper... It seems that some are stored on the c: Windows and some in C:Window/Web/Wallpaper...which is right

  Under Xp, under the paper painted office, where are the pictures actually stored... I want to add a picture to the file in order to make my wallpaper... It seems that some are stored on the c: Windows and some in C:Window/Web/Wallpaper...which is right

  ===================================
  Simply open the photo that you want to use as wallpaper and
  choose... Set as wallpaper... from the menu.

  If you want to physically add the photo in the folder then
  It can be seen in the background list... Add to the
  following folder: C:Window/Web/wallpaper

  FWIW... If there are fewer than 100 pictures in your my
  Folder of photos... you can see in the background list. John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.