Tempting desperately to open the Dimension E521 CD-Rom drive does not open. Anyone know the solution?

I tried all the solutions given by the computer itself nothing doesn't.  It seems that it will open up and then stops.  I have the green light as I usually do, but it flashes not stable.  I really need to use this player.  There is nothing in the drive to get stuck.  Is that someone out there has had this problem and how they solve this problem?

First of all, try to open Windows Explorer, click right on the optical drive icon and select eject.

Another option is to hold the eject button in (gently) in electric biking your system.  Take your finger on the button the moment where he begins to open.  In addition, you are allowed to try and hold the drawer open if she tries to close the bottle.  There are generally micro-switches that detect it and put an end to the attempt to close the plateau or the door.

You can also get the emergency eject hole somewere around the door (sometimes under a bezel).  It should work with the power on or off, but I do it with the power turned off.  (Paste a conductor in a piece of electronic equipment of power on seems a recipe for disaster to me.)  The hole is the diameter of a large paper clip (the favorite :) tool.  Succession the wire out and push to the right .  There should be some slight as resistance it UN-engages the latch and starts sliding drawer open.  At this point, you should be able to get out the drawer/tray by hand.

Tags: Windows

Similar Questions

  • P50-A-144 satellite: the CD-ROM/DVD-ROM drive does not

    Version of Windows 10 Home 1607 (Build 14393.187)

    Hello

    After Windows Update Version 1511 1607, the CD-ROM/DVD-ROM drive does not work.
    The D: drive does not appear in Windows Explorer,
    CD-Audios and videos / DVDs do not work.

    In the Device Manager, the following legacy status error message appear:
    "Windows cannot start this hardware device because its configuration information.
    (in the registry) is incomplete or damaged. (Code 19). »

    Could you tell me how to solve this problem?
    Thank you.

    The solution was to uninstall the program "Toshiba Recovery Media Creator' and system settings/Programm features.
    I still don't understand why, but the fact is that after uninstalling the CD-ROM/DVD-ROM start normal work.

    More information here:
    http://www.borncity.com/blog/2007/08...-verschwunden/

  • CD-ROM drive does not open

    Separated from this thread.

    How can I open a disc in my drive, but does not open on my screen?

    Hello

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    for Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
    Vista installation after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the system manufacturer and the manufacturer of the device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (burn CD & DVD and CD and DVD read). Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and
    the correct registry entries for your car.

    These are the keys in my opinion, are those in question - secondary-keys for the CD/DVD drive of course because there will be other subkeys in these keys. Be sure to ask specific keys involved as well as the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry for your CD/DVD settings
    drive from someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://Club.myce.com/F61/

    Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
    nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

    DevManView - free - an alternative to the standard Windows Device Manager, which displays all devices and their properties in flat table, instead of the tree viewer
    http://www.NirSoft.NET/utils/device_manager_view.html

    I hope this helps.
    --------------------------------------------------------------------------------------------
    Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

  • CD-ROM/DVD-ROM drive does not work. Device Manager indicates problem and there is no volume listed on the Volumes, how to fix tab?

    Description of the drive is HL-DT-STDVD +-RW GSA - T11N ATA Device Properties. Verified drivers and they are up to date.  Under device status "this device cannot start. (Code 10) clicked on search the Solutions, but no solutions are shown.  Have trouble with the DVD because I had the computer and have had several conversations with Dell but I think that my extended warranty just expired.

    Hello

    Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
    http://support.Microsoft.com/kb/943104/

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    for Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
    Vista installation after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
    Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and
    the correct registry entries for your car.

    Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
    as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
    the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry for your CD/DVD settings
    drive from someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
    nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

    DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
    devices and their properties in flat table, instead of the tree viewer
    http://www.NirSoft.NET/utils/device_manager_view.html

    I hope this helps.

  • DVD Rom drive does not open when I try to eject a disc

    Original title: dvd rom

    HI.i can open rom.i push to eject dvd but dvd rom not the open.can help me.

    Hello

    1 is this blink when you press the button to eject the CD/DVD drive?

    2. is there the CD/DVD in the CD/DVD drive?

    3 did you changes to the computer before the show?

    4. don't be the CD/DVD drive not detected in the Explorer(My computer) Windows?

    If the led does not illuminate, the reader is disconnected or broken. In this case, you may need to contact the manufacturer of the mounting of the CD/DVD drive system.

    If the led does not blink, you can try the following:

    (a) open my computer

    (b) right click on the CD/DVD drive

    (c) click on Eject and check if the CD/DVD drive eject

  • My dvd/cd rom drive does not open

    I looked for mechanical problems, I've updated the driver, I tried manually open (press the Open button), I tried to use the computer to open, but all without success. This has happened as my computer starts does not sometimes after it has been switched off.

    Hello

    Try using a tip of a paper clip to open the tray.

    "How to create a trombone in car opener.

    http://pcsupport.about.com/od/tipstricks/HT/ppdropen.htm

    "CD-ROM, DVD or other drawer not open."

    http://www.computerhope.com/issues/ch000214.htm

    See you soon.

  • CD-ROM drive does not open by cmd, trombone, "right click" eject and eject button

    as the title suggests, I have tried everything and can't get my HDD to open. all ideas are useful.

    Hello

    Sounds like it could be a stuck in drive, there are problems of power or lead, or
    It just can be used.

    If they don't help then check with the system manufacturer and/or drive
    Manufacturer support, their documentation online and drivers and ask in their forums
    (as appropriate) about the known issues.

    The drive is just stuck?

    For the readers of the status bar:

    Sometimes they get stuck. There is a small hole in the front of the CD drive which
    You can stick a paper clip in which will free the reader and allow it to open.

    Create a trombone in car Opener
    http://pcsupport.about.com/od/tipstricks/HT/ppdropen.htm

    Open a CD/DVD player with a paper clip.
    http://www.josepino.com/?open_cd-dvd_paperclip

    =================================

    For the readers of the slot:

    Check with the manufacturer of system on how do to eject the disc.

    Dell xps m1330 dvd drive will not eject cd inside<-- check="" these="">
    http://www.FixYa.com/support/t2643828-dell_xps_m1330_dvd_drive_will_not_eject

    Be careful as you may damage the player using the method below:

    You may need to get the driver to work 1 However, this could still work.
    http://www.tech-tweak.NET/2009/11/how-to-eject-STUK-DVD-from-slot-load.html

    The method used on the Mac could work
    http://www.YouTube.com/watch?v=wpWieIoBBrk

    How to disassemble the laptop (Dell XPS M1330)<--- voids="" any="" warranty!="" this="" is="" an="">
    http://ahwee.com/how-to-disassemble-laptop-Dell-XPS-M1330

    Also have heard double tape on a credit card or play can work.

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • CD drive does not open on the hard drive of the computer.

    Original title: on my hard drive DimensionE521 the CD-Rom drive does not open.  He starts to and then stops. The computer says it's OK? Help?

    I had this problem and another time after playing with him for days, all of a sudden it just opened.  There is nothing in the drive - I'm sure of.  Everyone has to experience this problem.

    Hello Nannytosix,

    If you look very close to the door of the CD player, you will probably see a small hole somewhere around him.

    What you need to do is unfold a paper clip and push it in the hole and it should open the CD drive manually.

    I encourage you to consult the manual to check this.

    Best regards

    Matthew_Ha

  • I try to open a Web page that previously opened well and it does not load, load it in Solution Explorer, but

    I'm trying to open a Web page that previously opened well and it does not load, load it in Solution Explorer, however. I deleted the cache and cookies, had a peak in the proxy settings does not work, it is not a https / /... Any ideas?

    By chance have you tried Mode without failure of Firefox? It is a standard diagnostic tool in order to avoid interference by extensions (and some custom settings). More info: questions to troubleshoot Firefox in Safe Mode.

    You can restart Firefox in Mode safe help

    Help > restart with disabled modules

    In the dialog box, click on 'Start mode safe' (not Reset)

    Any difference?

  • Re: CD/DVD drive does not seem to start the DVD in Satellite P750

    My CD/DVD drive does not seem to start DVD, it runs and runs and the only way I can run a DVD (i.e. film) is using Windows Media Center, while the software to install must be enabled in Windows Explorer.

    Anyone?

    Help, please.
    Thank you!

    Have you tried to change AutoPlay settings?
    Open Control Panel and Auto game options. Enable the option Use AutoPlay for all media and devices. Also change other options, especially for DVD movies, software and games.

  • Satellite L500-126-CD/DVD drive does not open very well unrolled

    Hello

    I just got my second Satellite L500-126.
    I traded my first for a new because the ESCAPE key got stuck sometimes and made a grinding sound.

    Now, with my new one, I noticed that my dvd drive does not open very well unrolled and 2 bars of silver metal bit come out with the car when I open it.
    Is this normal?

    Also, when I close the dvd player, I hear a little noise "ping!"
    Like a spring, or something. Is that also normal?

    Thanks in advance.

    Hello

    I'm not quite sure what you mean by 2 small bars of silver, but the reader of my laptop s contains two metals (runners, railway).
    This is normal and these pieces are important to ensure that the drive can eject properly and could remain in a good position.
    Still, you will hear a short click Open and close the drive.

    So I guess it's ok.

  • Disk drive does not open. What is a girl to do?

    I've been ripping CDs to music on computer, and now my drive doesn't open. Can you help me solve this problem?

    Hello

    If they don't help then check with the manufacturer of the system or in support of the Drive manufacturer,
    their documentation online and drivers and ask in their forums (if any) on the known issues.

    The drive is just stuck?

    For the readers of the status bar:

    Sometimes they get stuck. There is a small hole on the front of the CD drive that you can stick a
    a paper clip that will release him and the reader to open.

    Create a trombone in car Opener
    http://pcsupport.about.com/od/tipstricks/HT/ppdropen.htm

    Open a CD/DVD player with a paper clip.
    http://www.josepino.com/?open_cd-dvd_paperclip

    =================================

    For the readers of the slot:

    Check with the manufacturer of system on how do to eject the disc.

    Dell xps m1330 dvd drive will not eject cd inside<-- check="" these="">
    http://www.FixYa.com/support/t2643828-dell_xps_m1330_dvd_drive_will_not_eject

    Be careful as you may damage the player using the method below:

    You may need to get the driver to work 1 However, this could still work.
    http://www.tech-tweak.NET/2009/11/how-to-eject-STUK-DVD-from-slot-load.html

    The method used on the Mac could work
    http://www.YouTube.com/watch?v=wpWieIoBBrk

    How to disassemble the laptop (Dell XPS M1330)<--- voids="" any="" warranty!="" this="" is="" an="">
    http://ahwee.com/how-to-disassemble-laptop-Dell-XPS-M1330

    Also have heard double tape on a credit card or play can work.

    ===========================================================

    If necessary:

    Follow these steps to remove corruption and missing/damaged file system repair or replacement.

    Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

    sfc/scannow

    How to fix the system files of Windows 7 with the System File Checker
    http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

    Then run checkdisk (chkdsk).

    How to run check disk in Windows 7
    http://www.SevenForums.com/tutorials/433-disk-check.html

    ==========================================================

    After the foregoing:

    References to Vista also apply to Windows 7.

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The DVD player does not work after installing Windows 7
    http://support.Microsoft.com/kb/975270/

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
    Setup after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
    Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and the
    correct registry entries for your car.

    Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
    as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
    the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry settings for your
    CD/DVD drive someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
    nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

    DevManView - free - an alternative to the standard Windows Device Manager, which displays
    all devices and their properties in flat table, instead of the tree viewer
    http://www.NirSoft.NET/utils/device_manager_view.html

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • When you try to download a game: error "D" drive does not have a sufficient free space to download the game.

    Original title:

    I want to play the game "Hellfire".  My "D" drive does not have a sufficient free space to download the game from drive "D".  How to open a free space to download the game?

    I want to play the computer game Diablo "Hellfire".  When I try to download the game via the "D" drive, I get a message saying that the "D" drive does

    not enough free space to download the game.  How can I get more free space on the disk "D"?
    Hello
     
     
    1. What edition of Windows XP work?
    2. What service pack is installed on the computer?
    3. What happens if you download the game via the c: drive?
    4. The place where you download the game?
    Check if available hard disk space is available as recommended for the game.
    The disk cleanup tool lets you free up space on your hard disk by searching your disk for files that you can safely remove. You can choose to delete some or all of the files.
    You can perform Disk Clean up and then try to re - download the game to see if the problem persists.
    Description of the tool in Windows XP disk cleanup
     
    Consult the following link as well.
    You receive the error "your computer is running out of memory" message when you start Flight Simulator
    I hope this helps!

  • DVD drive does not open.

    DVD drive does not open.  Won't open with the emergency eject button.  Once opened, it will close with the eject / close button.  How can I fix it?  This can cause the drive open suddenly do not?

    Thanks for any help you can provide.

    Hello

    · What is the number and the model of the computer?

    · Do you remember all the recent changes on the computer before the show?

    It seems to be the problem with the computer's hardware. You can check with the manufacturer for assistance on the same.

  • Ethernet driver does not work on Dell Dimension 8520 after Windows XP install.

    Ethernet driver does not not on my Dell Dimension 8520. I reinstalled Windows XP and drivers, and everything works except drivers Ethernet and those. They have big yellow points to mark by them. Tried to delete and restart, but they come back and still do not work.

    I don't see anything for 8520 dimension on the Dell web site.  Windows XP for Dimension 8250 drivers are here .

Maybe you are looking for