Where my application should store the images when I don't want to see them built in app Gallery?

Similar Questions

• How can I get rid of the practice (news this morning) of messages that appear at the bottom of the Inbox message list when I don't want to see them?

  Until this morning, I could the cursor up and down on my list of the Inbox for messages I wanted to open (or delete without opening). Now, each message darn, the cursor stops on - or sometimes even just past above - appears below the line at the bottom of the list of messages. This means that I can't see so many messages listed at the same time as I could yesterday.
  I can get rid of the line (and the message that open automatically below) only by moving the cursor down on the line. I don't want to do that with every message that I make a break on or exceed. If I want to open a message, I'll open - it is not so difficult.
  I imagine that some people wanted this feature or that it would not have been installed. All I want is to be able to turn it off.
  Thanks for any help.

  Re; I guess that some people wanted this feature or that it would not have been installed. All I want is to be able to turn it off.

  There is no such feature added, because it would be ridiculous to implement.
  The problem you are experiencing is not a problem with Thunderbird.
  It is likely to be your mouse, mouse pad or keyboard.

  Emails do not open without a statement to open. That statement comes from the mouse, mouse pad, keyboard, then this is where to look.

  Either you're inadvertently clicking or your settings are too sensitive or maybe something is stuck, your mouse/keyboard mat is recording your action and act on it.
  Action comes from the mouse or carpets to mouse or keyboard and the computer includes an action is required and performs this action in Thunderbird.

  Determine if what you are doing when it occurs, what method to use and check the settings.

  I would go in your computer control settings to get for example: mouse pads
  and check the settings for sensitivity.

  If you use a mouse pad, it's too easy to press slightly harder and move cursor is interpreted as a left click. Check the sensitivity settings.
  Maybe your keyboard should be cleaned as keys become sticky.
  If you use a mouse, then make sure that your hands are not inadvertently pressing the buttons, the checksensitivity settings or maybe the mouse begins to fail, if not too sentive.

• When I open a page in the history, I don't want to see the same page

  Is it possible to have firefox know that I'm looking for a page or more, but I don't want to see them once again posted because I do not know if I already searched on this page.

  Also is there a way to indicate the date and time could tell me those I have already opened.

  Perhaps the column number of visit in history (library) Manager, via views > columns

  See also:

  • Visited: https://addons.mozilla.org/firefox/addon/visited/

• Where Firefox stores the images as wallpaper?

  Where Firefox stores the images as wallpaper? I was playing around with windows theme and I can not find the wallpaper that was displayed before.

  According to me, the question that arises is, "where Firefox stores a picture that I have a right click and choose «Set as wallpaper...»» » »

  I have not changed my background in over a year, and I use Windows XP, so maybe this isn't true for the new versions of Firefox or Windows, but I found my background image under "\Application Data\Mozilla\Firefox\Desktop Background.bmp C:\Documents and Settings\current user." Of course, replace the current user with your Windows user name.

• Download picture of URL link and store the Image in a Local folder in BB10 Webworks

  Hello

  I want to download the image of URL link and store the image in a local folder in Webworks BB10.
  But I did not get the code for this.

  If such knowledge code or have any solution then please help me...

  Thank you best regards &,.

  Laurent Subudhi

  NitishSubudhi wrote:
  I go through this code... but it is throwing the exception. That is to say "ReferenceError: Webworks is undefined '." "

  According to the device/operating system, you need to add the extension of your installation of WebWorks as explained here for OS SmartPhone BB or PlayBook OS.

  To use read the samples provided, they must work somehow. When I worked with the extension on PlayBook I only copy + pasted the provided source code and changed the attributes for the function call:

  // You need to define "remotePath", "localPath", "onProgress", "onError", "options" like shown in documentationblackberry.io.fileTransfer.downloadFile(remotePath, localPath, onProgress, onError, options);
  

  For OS SmartPhone BB the function call looks like this:

  // You need to define "options" like shown in documentationwebworks.io.FileDownloader.download(options);
  

  All think that all information provide here, try to follow and cela should operate.

• Lightroom stores the images.

  I was working on the images (which took forever since I'm a beginner) for a few days. Whenever I open Lightroom the images were there. I imported by mistake a few others and I can't not find the original images, I was working on that. All this work seems to have disappeared. I can't find them anywhere (only originals on the hard disk) even when I try to find the newest. I wonder lightroom stores the images actually in the software that I can access or can I only find them on the hard drive. A little frustrating to have lost all that work. I don't know if I knew what I was doing it does not seem so difficult :)  Does not seem to flow easily.  I lost all the changes?   What exactly is a catalog. Is this just something that is created to the time that you are working on images or keeps it really images?  Thank you for your help. Very much appreciated.

  Hello!

  Dj_paige is correct in his answers. I wanted to respond by adding some resources and some visuals to dispel some confusion, I think that you are experiencing.

  Terry White explains what a catalog, how an import works (where your files go), suggests a workflow that could avoid what happened to you earlier: link.

  Also explains the basics of the catalog, lightroom's previews, file management:

  http://digital-photography-school.com/understanding-the-Lightroom-Catalog-and-file-MANAGEM ent-system

  Tips for managing files and folders

  Please let me know if you have any other questions,

  Janelle

• Lightroom 2.5 size of the Image when printing

  I have searched and tried several approaches but can't LR to adjust the size of the image when printing.

  For example, I have a Page of Laboratory Test tif image that has a size of 23 "wide x 29" H paper and resolution 180 dpi.

  I can use CSR 4 Image/Image size to change this in a 8 "W x 10.5" H and a resolution of 320 DPI using resampling. The reduced image prints correctly in CSR 4 on paper 8.5 "x 11" and translates. 25 "top and bottom margins. The same thing happens in LR 2.5 with the reduced size image.

  However, if I try to print the original image using LR 2.5 to automatically resize the image it is malfunctioning. I tried all kinds of combinations of settings so that it can reduce the image (as is done in 4 CSR) and print with. 25 "down the margins without success. The image can not resize correctly.

  Is it a bug, a feature?, or operator error? Can anyone tell how LR 2.5 will resize automatically so it prints correctly? I tested on other computers with the same results.

  Thank you

  Go to the print module.

  Select print to jpg.

  Set the resolution at 180 dpi.

  Other output parameters, sharpening, profile of such paper as required.

  Determine the size of margin according to the needs.

  Set the size of the cell to the size of the image

  Set the Dimensions of the custom paper size... 29 "x 23" in this case.

  You can drag the size of the cells and the edges around until get you exactly the layout on paper, you need. So how successful final print to the file, name the file, and the work is done.

  If you want to print a different size, with different resolution, on paper of different size, with different borders all this can be done in the print module and it is WYSIWYG if no guess work (or calculations) involved. LR rather PS this also has the advantage of use much better algorithms for images of migration than PS and application output sharpening for the specific media type, to which you intend to print, using the RAW data

• HX850 - no adjustment of the image when using netflix

  Hello

  Is it possible to adjust the picture settings when using netflix? All the buttons on the remote seem to be blocked when netflix is running. It is very annoying because I can't disable cinemotion making all movies look like they were saved by a kid with some * camcorder.

  Adjustment of image quality with 'common' setting also does not affect the settings of the image when the netflix app is running.

  THX!

  Hello FA5_FLIP.
  Welcome to the community of Sony and thanks for the post.

  Setings photo on TV are not accessible when you watch Internet channels.

  Fact the image appears in poor quality when the various videos of Netflix streaming and streaming of various videos like YouTube, Amazon etc. Internet services?

  Are the same Netflix videos appear fine when transmitted in an another TV or computer?
  Check if the speed of the Internet meets the requirements of 2.5 Mbps for SD videos streaming and 10 Mbps for streaming HD videos.

  Try to update the Firmware of the TV to the latest version.

  Try to separate the TV from Netflix account and even add a link to it.
  Follow the steps below to remove the TV has Netflix.

  https://us.en.KB.Sony.com/app/answers/detail/A_ID/32176

  Thank you.

• When I go to itunes store, the screen flickers never done before

  When I'm going to iTunes Store, the screen flickers never done before I'm on windows 10

  That's nice.  You have a question?

• Where XP does not store the file in browser's history?

  Hello everyone, ok so I don't know Vista and Windows 7 stores the browser history in the same place but as on XP?

  Windows 7 it stores here: C:\Users\[USER]\\AppData\Local\Microsoft\Windows\History

  Where XP does not store the browser history? Also what Windows 2000?

  The store of XP in the following folder browser history

  C:\Documents and Settings\utilisateur\Local Settings\Historique

• When I save a PowerPoint document to PDF format, the images become white boxes or have lines around them.

  When I save a PowerPoint document to PDF format, the images become white boxes or have lines around them.  I was using Adobe 9 Pro, just upgraded to Adobe Pro XI and he always does.  I have other people to convert the same file in PDF format and it works fine so I know it isn't the Power Point file, there must be a setting in my Adobe.  Any suggestions?

  Hello

  Could you please update on the operating system you are working on?

  Is - this windows or Mac?

  Also an update on the version of Ms Office installed on your system.

  Do you feel it work with all the PDF' or a specific?

  If you are using windows, try to repair Acrobat once and then see if that solves the problem.

  Also, check the latest updates installed on your computer.

  Launch Acrobat > navigate to help > check for updates.

  Please, try the two steps and see if that fixes the problem.

  Concerning

  Sukrit diallo

• The host has not enough space on the boot partition to store the image upgrade. It takes a minimum of size_in_MB. After the release of space or perform an installation from the CD-ROM.

  Hi everyone, the difficulties in trying to update the Update Manager. ESX4.1 to ESXi5.0

  Error I get is below to correct the scan before update:

  The host has not enough space on the boot partition to store the image upgrade. A minimum of 299MB is necessary. After the release of space or perform an installation from the CD-ROM.

  There is enough space in the local disk

  Size of filesystem used Avail use % mounted on
  / dev/sdd5 4.9 G 1.6 G 3.0 G 35%.
  / dev/sdd2 2.0 G 107 M 1.8 G 6% / var/log
  / dev/CCISS/c0d0p1 99 M 67 M 27 M 72% / Boot
  / dev/CCISS/c0d0p2 4.9 G 1.6 G 3.1 G 34% / esx3-installation
  / dev/CCISS/c0d0p1 99 M 67 M 27 M 72% / esx3-installation/boot
  / dev/CCISS/c0d0p7 2.0 G 101 M 1.8 G 6% / esx3-installation/var/log

  Cannot continue installation due to the lack of space and don't have the option upgrade CD directly (of complicated issues)

  Do you have any suggestions?

  Thank you

  It sounds like this host has already been improved 3.x! In this case you will not be able to upgrade to 5.x using the Manager to update because of the small partition/boot (99 MB).

  to remedy the hosts against a basic upgrade

  ... You cannot use Update Manager to upgrade to 5.0 ESXi host, if the host has upgraded ESX 3.x to ESX 4.x. These hosts have not enough free space in the partition/Boot to support the process of update Update Manager. Use either interactive or scripted upgrade.

  André

• Loss of the size of the image when exporting .tif

  I have a series of .tif images that have original dimensions of ~ 4700 x 4700. However, when I open them in illustrator, they invariably under ~ 1750 x 1750. TIF, even if no changes have been made. How to preserve the size of the image?

  Lol Illustrator will always respect the resolution setting. You will need to put the image in Illustrator, if you want to keep the resolution.

• How do I enlarge the image when the mouse is clicked

  I want to enlarge the image when the user clicks on the image. How to make muse? Thank you!!!

  I think you are trying to implement something like 'Click to see in original size' for images in a slide show widget. If that's what you try to achieve, refer to a similar thread here a possible solution: http://forums.adobe.com/message/5225256#5225256

  Thank you

  Vinayak

• How to get captions to accompany the images when recording on a flash drive?

  I SPENT ABOUT 2 WEEKS FOR NAMES OF PEOPLE TO MY GRANDDAUGHTERS OF MARRIAGE AND ADDING TO THE LEGENDS AS WELL AS THE PLACE WAS TAKEN AND THE DATE.

  I have JUST COPY AND GLUE THE DE ADOBE PHOTOSHOP ELEMENTS 10 FOR FLASH DRIVE.  HOWEVER, NO SUBTITLE.  How can I DO?

  OK, for your family to do, you really want to have the caption written on the photo: for them to 'delete it to print just the image', this legend would have to be registered in a separate layer, and the image stored in a format that takes in charge the layers PSD or TIF.  Then your family members would have to mess around with some sort of software that allow them to hide this layer with the legend before printing and so forth of image editing...

  This is what we must try (and you can test the procedure yourself on your computer):

  1. Right-click on a photo in the Organizer, and choose "Add Caption".
  2. Write your caption and click on 'OK '.
  3. Use the file... Export as a new file (s) to export this picture to your USB.
  4. Use Windows Explorer to look at the image on your USB.  At the bottom of the Windows Explorer window, you will see the various pieces of information about the photo, and your caption will be listed as the "title".

  Although you must do steps 1 and 2 one-at-a-time for each photo, when you have completed these steps, you can select all of the images and do step 3 for each of them at a time.

  Which does what you're looking for?

  Ken