Where the CRM Customer-user account is stored in the database.

Similar Questions

• Need to change the name of the administrator under the folder of the user account

  I just got a new HP laptop with Windows Vista 64 SP1. My friend who got the laptop I use a nickname that I hate it when he set up the computer for which it was not supposed to do in the first place. I went to the section control panel user accounts control and changed the name of the administrator account. I have only the administrator account on my computer with the guest account. That part worked.

  My problem is that, under C:/Users / (username), it still shows that hated nickname. I want to change the name of this folder, but cannot understand how or if it's possible. Can anyone help? Thanks in advance

  As you have discovered, you cannot change a user account by simply changing the name. That will be a change cosmetic only and none of the files/folders real profile will be changed. Follow the instructions below to fix things to your liking and to implement correctly under Vista user accounts.

  1. create the new user account (named as desired) as a * standard * (not administrator) account and at least one additional account with administrative privileges. Call the extra account 'CompAdmin', 'Tech' or similar.

  2. Enter the new user account once if the profile files are created, and then disconnect and then connect to CompAdmin.

  3. go in Control Panel > system > advanced > user profile > settings

  4. you will see where you can copy user accounts. Copy the misnamed old account to the new name correctly there. Use her browse to select your new account (C:\Users\newaccount). If you don't want to copy all the settings, and then instead simply navigate using the old user, music Explorer Windows Documents, etc. and copy the data to the new user folders.

  5. connect to your new correctly named user account. When you are sure to have what you need, you can delete the misnamed control panel user account > accounts to users if you wish.

  General information about configuring users in Vista:

  You absolutely don't want to have only one user account. As XP and all the other modern operating systems, Vista is an OS multi-user with system built-in accounts such as administrator, by default, all users and guest. These accounts should be left alone because they are part of the structure of the operating system.

  In particular, you do not want one account user with administrative privileges on Vista because the administrator account integrated (normally only used in emergencies) is disabled by default. If you use as an administrator for your daily work, and this account is corrupt, things will be difficult. It is not impossible to activate the built-in administrator to rescue things, but it will take third-party tools and work outside the operating system.

  The user account that is for your daily work must be a Standard user, with the extra administrative user (call it something like 'CompAdmin' or 'Tech' or similar) only it for elevation purposes. If your normal user account is an administrator, having created "CompAdmin", connect to it and change your normal user account Standard. Then log on to your regular account.

  If you want to go directly to the desktop and ignore the Welcome screen with the icons of the user accounts, you can do this:

  Start Orb > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).
  MS - MVP - Elephant Boy computers - don't panic!

• Convert the database to 10 v to v11

  Hello

  I'm unable to convert and merge a v10.1 v11 user database.  I made a backup of Usrcomp_S.usr to another folder in Windows then used the merger of Multisim and Ultiboard and conversion tools. Here are the steps I followed:

  1 tools > Database > convert database...

  2. Select Source in the dialog context database names.

  3. navigate to the database using the Windows dialog box. Select my copy of database using "All Files." Curiously he is not using the default filter. Select OK and then the following error:

  The path of the database: "database\UsrComp_S.usr" was not found or not set.
  You want to select the path where the database of component?

  4. Select Yes then select my now visible database of the dialog Windows.

  5. press start to convert my database to aid auto rename. Briefly, something happens that seems to be the conversion and the window convert watch Done

  6. close the convert and open tools > database > merge a database...

  7. Select a name of the component database

  8. Repeat step 3 above. The allegedly converted database is still not visible but this time there is no option to "All Files." In the file name drop-down box I choose the path previously used for the database copy. Select open and receive the following error message:

  The path of the database: "database\UsrComp_S.usr" was not found or not set.
  You want to select the path where the database of component?

  9. Select Yes then select my now visible database of the dialog Windows.

  10. press on open and receive the following error message:

  Error: Could not open the database [user data].
  The file format/version does not, and cannot be merged.
  If the database is from a previous version, use convert the database.

  Help, please. This should be a simple process of a button to import parts of the user of a previous version.

  Richard

  Hi Richard,

  I think you are trying to convert the incorrect database. From the name you specified (Usrcomp_S.usr), it's just a CDS model uses to create a user database, it is not your user database.

  On Windows XP, the user database is located in C:\Documents and Settings\\Application Data\National Instruments\Circuit Design Suite\11.0\database\

  On Windows Vista/7, the user database is located in C:\Users\\AppData\Roaming\National Instruments\11.0\database\

• Connection to the database Oracle by TOAD

  Hi experts, I have a problem connecting to Oracle DB...
  
  I installed Oracle Enterprise DB in Windows Server 2008, in the Virtual Box platform...
  
  now, I need to connect to the DB, Toad, since another platform (windows 7)...

  user: xxxxxx
  password: xxxxxxxx
  direct > host: 10.0.2.15, 
              port: 1521
              sid: books
  connect as: normal
  connect using: oraClient11g_home1

  This is the error

  ORA-12170:TNS:Connect timeout occurred

  hope someone can help me.
  
  Thanks in advance...

  Go to the server where the database is installed. Check if you have installed or not on the server listener?

  Go to the server
  go to the command prompt
  lsnrctl status

  After the release

• Logon sqlplus from the database server do not.

  I want to export data from the a database. I can sqlplus as a particular user (owner of the table) from a remote server. But when I try to sqlplus or run the exp from the database server (the server where the database is running), I refused to sign. Is there a configuration in the database in order to prevent this loggin user from the database server
  
  /U01/Oracle/app/product/10.2.0/DB/bin-> sqlplus testuser / *.
  
  SQL * more: release 10.2.0.3.0 - Production on Thu Apr 29 14:28:30 2010
  
  Copyright (c) 1982, 2006, Oracle. All rights reserved.
  
  ERROR:
  ORA-01017: name of user and password invalid. connection refused
  
  
  /U01/Oracle/app/product/10.2.0/DB/bin->. / testuser exp / * file=/tmp/interface.dmp tables = interface
  
  Export: Release 10.2.0.3.0 - Production on Thu Apr 29 14:28:53 2010
  
  Copyright (c) 1982, 2005, Oracle. All rights reserved.
  
  
  EXP-00056: ORACLE error 1017
  ORA-01017: name of user and password invalid. connection refused
  
  
  TIA
  Ravi

  Try this.
  1. the cd in your home directory.
  2. starting at the prompt, so source oraenv
  -> . oraenv
  3. When prompted enter the name of your database, in the same case, as in/etc/oratab.
  4. try to connect now
  -> sqlplus testuser / *.

  If it works for you, then you must ensure you environments ORACLE_HOME, ORACLE_SID and path are correct - as oraenv does for you.

• Save the results locally when the database is offline

  Hello world!

  I work to justify the implementation of teststand for automation of test on the company where I work, far it seems that is the way to go, but they are some of the senior management, hesitating on this subject. One of the things that will be great for us (he will give him a +) is the ability to store the results locally on the workstation, where the database is offline (failure of the server or client disconnected from the network), and once he returns, the data is transferred to the database.

  We want to use SQL server for the database. I thought creating a SQL Server express locally on the computer, so all of the results will always be saved in the station first, I tried to use the sql import/export wizard to import data from a sql server to another, but I did not find any way to do it automatically, we are looking for one of the solution of the box free of charge or regular very very cheap It will be installed on each workstation.

  Thanks for your help and congratulations!

  Abelino,

  You can take advantage of the new features in later versions of TestStand.  In 2012, and most recent, you can write raw results.  As said Dennis you could just always write raw results.  Then use the TestStand Offline results new treatment utility write those in the database: http://zone.ni.com/reference/en-XX/help/370052K-01/tsref/infotopics/offline_processing_utility/

  You can create a service or something to do.

  BTW - Plugins can run in its own thread.

• Cannot start the database instance - cannot open the spfile

  Here's what I did, that lead to a problem starting my database instance. It is a database that I just load data, and I do not have a backup yet :-(
  
  I created a structure for a new database and data loaded from a different database, which has been a very long process of becasus of the amount of data.
  
  Today, I decided to create a model of this database by using the Configuration Wizard.
  
  Before you begin the management of models, I decided to remove an old database that was never created correctly. I used the Setup Wizard to remove this database and got an error that SPFILEROVM. There is no such thing as ORA. But the removal has completed, and I worry too much.
  
  Then, I started to create my GoodDatabase model. I stopped with the message again that the SPFILEROVM. ORA (from the old database) did not exist. But it is already stopped my GoodDatabase and I can't restart. I use OEM Database Control for restart, but I get the complaint about the SPFILEROVM once again. ORA of the old database. How can I solve this problem? The error of OEM is attached below. The database is under Windows Server 2003. I can connect in OEM to another database instance (orcle) but I do not have the OEM rack.
  
  Thanks in advance.
  
  
  SQL * more: release 10.2.0.3.0 - Production the Sea 2 08:42:15 Feb 2011
  
  SQL > SQL > connect to an idle instance.
  SQL > ORA-01078: failure in the treatment of system settings
  ORA-01565: error to identify the file ' F:\ORACLE\PRODUCT\10.2.0\DB_1\DATABASE\SPFILEROVM. ORA'
  ORA-27041: could not open the file
  04002 - OSD: could not open the file
  S/O-error: (OS 2) the system cannot find the file specified.
  Disconnected

  1 find the log of alerts for this instance
  2. look for the section where the database is put into service. All default settings will be listed here. Copy the parameters by using Ctrl + c
  3. create a file F:\ORACLE\PRODUCT\10.2.0\DB_1\DATABASE\initrovm.ora
  4. Paste the settings in this file
  5. start a dos commands prompt
  6 set oracle_sid = rovm
  7 sqlplus / as sysdba
  8. create spfile from pfile

  Your database must begin now.

  -----------
  Sybrand Bakker
  Senior Oracle DBA

• will not connect to the database

  So, I have a database on our server that I have access via phpmyadmin.

  I need to connect it to my dreamweaver site so I can add a dynamic content.

  I entered the information on the test server were the same as the remote info because we have not specifically set up a test server and can also 'test' on the regular server.

  When I get the information I have on the database in the control panel applications to connect and create a Recordset. I get the error that it cannot communicate with the testing server.

  any idea?

  When you set the MySQL connection, set SQL server as localhost?

  The test server is not necessarily distinct from the regular server. It doesn't have to be defined so DW knows where the database.

  I hope this helps.

• Compression/free space in the database.

  Hello
  
  I need to copy the version of database 8.1.7.4 on solaris 9 to another box under solaris 10 to upgrade to 10 gr 2. The size of the data files (all data files) has data is about 600 GB where the database size is approximately 270 GB. The traget box has storage capacity is 450 GB. What all the options and best practices for implementing this plan. Time is also a problem. The two servers are not in the same place of geo.
  
  Please give me your expert advice.
  
  Thank you
  Naveed

  Transportable tablespaces require copies data from the source to the destination files. In this case, you have not enough space on the destination for the data files of the target system.

  Justin

• Where the log file is located (Win Vista) for the actions of OTHER USERS have taken to using the boxes in user account control?

  Where the log file is located (Win Vista) for the actions of OTHER USERS have taken to using the boxes in user account control?

  I use the version of Vista Home Premium.

  While I don't really like how the UAC area enters the information that tells it when to display the box tell me about your work of things on the UAC (I know an article exist on the web), is not how to answer this question.

  There is no log of UAC elevation file.

• DPS is their function where the user can choose which pages they want to keep, to build a custom (build yours) version for themselves.

  DPS is their function where the user can choose which pages they want to keep, to build a custom (build yours) version for themselves.

  N °

  Neil

• Error for this user account details can only be updated through the site where it was created first

  I get this error will receive try to put in place a new email: "Details of the error for this user account can only be updated through the site where it was created first."  What should I do?

  My email is down.  If you respond by email please send it to [email protected]

  Thank you

  Rick

  All sorted

  Thank you very much for your help

  2014 12-15 10:04, Anshul.sharma wrote:

  ERROR FOR THIS USER ACCOUNT DETAILS CAN ONLY BE UPDATED THROUGH THE SITE WHERE IT WAS CREATED FIRST

  created by Anshul.sharma in going live (Emails, users, domains) - discover complete discussion

• Where the owb user information is stored in the tables

  Hi all
  
  I use repository OWB 10.2.0.4.0. I need to know where the user OWB information are stored in Physical repository tables.
  
  Please help me with this?

  You can consult the following queries

  1. Select the owner from dba_objects where object_name = 'ALL_IV_INSTALLATIONS' and owner not in ('PUBLIC');

  2. select separate beneficiary, substr(granted_role,5,25)
  of dba_role_privs
  where substr (granted_role, 1, 4) = "OWB_".
  and substr(granted_role,1,6) not in ('OWB_D_', 'OWB_O_', 'OWB_A_', 'OWBR_')
  and default_role = 'NO '.
  and admin_option = 'NO ';

  Thank you
  Fati

• With XP, with is three different user accounts, possible to download Firefox 4 for a single user and keep Firefox 3 on the other, for a period of learning?

  We are running XP and have 3 different user desktop accounts. We are very excited about the features of Firefox4, but one user a lot less comfortable with changes and does not want to lose the comfort of navigation in 3 until it had a chance to get used to using 4. May take a while...

  Is it possible to download Firefox 4, perhaps to a new location. Or a new user account. And use that as a "teaching tool" while maintaining the 3?

  Or can we move on 4, re-download a version 3 and import previous bookmarks for this user to new 3 download, until we him uncomfortable.

  The answer is probably not. But if there is a creative way to do that, without another available computer, that would be great. Otherwise, improve us and deal with the frustration and whining here... 4 is too good to pass up.

  Ideas?
  Linda

  When you install Firefox 4, choose the custom installation option and change the install location of Firefox. You'll then 2 versions of Firefox are installed.

  As you have different user accounts, each user will have its own Firefox profile (location where are stored bookmarks, passwords, etc.). You should not pass between the different versions of Firefox with the same user profile. For those who want to use Firefox 4, make sure that you use a Firefox shortcut that opens Firefox 4, even for one who wants to stay with Firefox 3, just keep their shortened origin of Firefox and it should open the old version.

• Customization of the insertion in a custom user interface palette

  Greetings,

  I am working on a custom for Teststand application user interface and I want to give the user the ability to edit files in sequence using a simplified subset of the predefined types step.  I based user interface custom off the Labview FullOI example in the teststand 4.2 folder.

  I found the context menu item 'Customize' out of the palette of insertion and who seems to get most of what I'm looking for (hiding like IVI and synchronization of files and the individual steps as the FTP files and call executable), but what I really want to know, is if I can remove it to the different symbols of 'top' that choose between adapters.  I wish that the customer must only see Labview and none and RID where hide the CVI, C/C++ DLL, .NET and ActiveX.

  Where, moreover, are the options that you set in the menu customize stored user interface custom compared to the sequence editor own right?  I want to make sure that I have a good list of all of my modified files I create a CD of deployment of work later on the road.  I'm assuming that to change the visible categories in the interface custom user won't change their visibility in the application of the sequence editor.

  Personalization step insert palette changes affect the sequence editor and the user interface. The settings are stored in testexec.ini in the cfg directory.

  You can hide the adapters using the card configuration window in the config menu

  You can simply keep separate versions of your testexec.ini, one for when you want the customizations and the other for when you don't have, assuming that you do not use the machine even for both. If you use the same machine for both you can implement some sort of automated way of switching on which version of the file that you are using.

  Hope this helps,

  -Doug