Where the time-remapping?

Similar Questions

• Reverse the time remapping effect?

  Hi, I have a membership with the time-remapping applied via an expression and a skeleton key slider controlling the speed of reading of percentage.

  Inside of the time remapped composition there is an effect property I want to be done by the time remapping. Is it possible to somehow invert the time remapping effect so that it appears unchanged in the composition of parent?

  I think I'm close, but I still can't understand:

  -Hand Comp, example time: 0:00:14:18

  -Comp time to parents: 0:00:14:20, remapped to time right now (maybe before and after by a few images)

  -Nested Comp expression of effect property:

  var time = counteractTimeDisplacement - (((comp("__Main_Comp__").layer ("FrameDifference") .timeRemap - 1)));

  etcEtcEffectPropertyValue = somethingReferenced.valueAtTime (counteractTimeDisplacement);

  
  

  -FrameDifference Composition (simply shows the weft of the difference in time)

  Remapped time: 0:00:01:02 / / added 1 second to allow negative values, when the time remapping effect is less, perhaps that should not be a timeRemap property, but I don't know how to use time on an object. null values

  -Expression of remapping the colors:

  ()comp("Main_Comp").layer ("Parent comp') .timeRemap - time) + 1

  Above doesn't work and seems out of step. I realized the FrameDifference composition is also indirectly done by the time remapping effect because the nested composition can access it and its remapped, so I tried for the composition of FrameDifference :

  -Composition FrameDifference

  -Expression of remapping the colors:

  (comp("Main").layer ("Parent model") .timeRemap .valueAtTime (comp("Main_Comp").layer ("Parent comp') .timeRemap) - .timeRemap comp("Main_Comp").layer ("Parent model")) + 1

  Its still not sync, can someone who understands the remapping / time better than me please help I can't see where im going wrong. Yet once I can't get out of the effect inside the remapped comp and use separately as this will cause other problems.

  Thanks for reading

  You make it too difficult. If you have a layer or element that you do not want be affixed by the time remapping effect then put this element in comp. Another thing is just a waste of time.

  Change the speed of reading over time can be very complicated. The best way to understand what you do is look to the graphics editor. You need a much more complex expression in order to speed up and slow down playback without taking the time reverse. Please see motionipt.com where Dan Ebberts can show you how to make the ramp upward and boat speed reading thing.

• Can't reposition the timeline for the time remapping effect

  I use Premiere Elements on a PC running Windows 8.1. I am trying to apply the time remapping effect to a section of an element. I've marked the beginning and the end of the segment I want to remap with markers of the scene. Set the timeline so that the segment that I intend to remap appears on the screen. When I click on the time remapping effect control (Tools |) Redefinition of the time), the timeline moves to the end of the clip, and I can't reposition to display the part I want to without leaving the screen of time remapping. How to keep or move the timeline on the part I want?

  When you select the option of time remapping in the tool button in the action bar, you should go to an any other workspace, one dedicated to the time remapping effect. You shouldn't see the chronology of regular edition.

  You click to select a clip on the timeline, then you click on tools, then time-remapping. Opens in the workspace of time remapping.

  Is this what is happening? It is not clear from your description.

  You are actually clicking to select one (and only one) clip on the timeline, before selecting the time remap tool, right?

• A clip I made the time-remapping on the shortening.

  Okay, so, I'm still very much a first baby and this is the first time I tried to play with time-remapping. First of all, I'm on a PC using first Pro CC 2014.2.

  Basically what I've done is created a cube rotating '3d '. I want to do with it is to rotate quickly, then slow down so that it is possible to read what is written on it. I got successful and ramp at the speed of the way I had hoped.

  However! The clip is really long (I wanted to make sure that I gave myself enough time to play with because I wanted to speed up a bit), then I tried to shorten the clip... but when I do that, anything after the ramp becomes black. The first second or two before the ramp is always visible and spinning, hit the ramp and blackens. I tried just to drag the ends of the clamp as using the razor tool. The razor tool allows me to snap, but when I delete the excess part it always disappears.

  Here is a screenshot just after using the razor tool.

  

  And it disappears when I delete the excess part.

  

  I have a feeling that he might have something to do with the first who need to be able to 'see' what's coming or something, and by removing the excess it is unclear what more can be done. But I wanted to ask and see if there was a way to shorten, if not I'll just throw something above the rest of the clip so that you can not see it always go to go back and continue on my way.

  I just had a quick glance and I don't see what is happening. The easiest option is to export the master as an intermediate file without loss and change. When you make the time remapping effect, I always send to AFX and use the efx superior Timewarp, it has its own quirks but it does a better job.

• Motion/opacity (yet) does not when you use the time remapping effect

  OK: Here's my meat. This bug has been around for CS3 and CS4. I was hoping this would be fixed with the arrival of CS5, but apparently it still has not been resolved.

  If you use the time remapping effect in the body, you can not use the other features of keyframing, such as movement or opacity. If you do, the video simply disappears. Rendering will not help either. The only way to get the opacity of the function is to overlay a video black bar on the top of the element (or any other cache of color if you like fantasy) and have the opacity on this clip in reverse work. How to get movement in these clips remapped time to work is still somewhat a mystery to me...

  Has anyone found this tedious, boring/irritating?

  So, when can dear Adobe, we expect a fix for this? If all goes well before CS6.

  Thank you very much.

  Richard

  Yes, it's a real annoying bug.
  Simple around - after work you time-remapping your clips, nest (control-click on the clip and select 'nest'), then you can change the opacity normally.

• How will I know where the time goes when you delete a line?

  Dear experts,
  
  Removal of certain rows in a table (approx. 4.9 GB / 2.9 Millon lines) takes an average of.5 seconds each line (on average).
  
  This table contains 3 clues, just I just rebuild. Statistics from a couple of the day before.
  
  I have imported/exported the table to a new schema and destruction prend.002 seconds each line (on average).
  
  How will I know where the time goes when you delete a line?
  
  BTW, this is ORACLE 10 g
  
  Thank you
  Serra

  There the child tables of this table with FK defined as DELETE CASCADE?

• Where the time mode hearing CS6?

  I can't find the time for hearing CS6 mode function. I searched through internet forums, where they said select options > time mode, but I don't not yet find the button options in hearing CS6.

  CS6 hearing moved somewhere or renamed?

  Sorry, no.  CS6 was the last version available without subscription.

• Possible tweak to the time remap KeyFrame spacing?

  I do a lot of time remap keyframe tweaking in AE, so I tend to zoom in the timeline.

  Is there a way to reduce the spacing between frames? Then, I'll be able to display more images on the screen. Thank you!

  Nope.

  Mylenium

• Play a sequence of first which has been accelerated by the time remapping effect.

  I accelerated an element in a sequence in first CS5. I then he brought in yet (also CS5), via dynamic links, to create a DVD. He won't play smooth. It is jerky this clip on the rest of the sequence.

  playing very well at first.

  What I am doing wrong?

  Thank you

  I have not yet made the DVD.

  Go ahead and do it.  Chances are that you see just a limitation of the preview, but the final product will work fine.

• Time remapping key frames cause other keyframes become independent to where they are on the timeline

  This is the BUG report, in that I just sent. If anyone has anything to add.

  ******BUG******
  Concise problem statement:
  When I add the time remap keyframes to a clip, other keyframes become unrelated to the part of the timeline, on what they are.

  Steps to reproduce the bug:
  1. add TIME REMAP keyframes in a MONTAGE WITH of OTHER keyframes (AS the POSITIONING of KEY frames)
  2.
  3.

  Results: I HAVE CHANGE THE COORDINATES OF UP/DOWN AND THE CLIP DOES NOT MOVE YET, SO I RUB ALONG THE CLAMP AND IT MOVES UPWARDS OR DOWNWARDS TO A COMPLETELY DIFFERENT OF THE CLIP PART. AS SOON AS I HAVE TIME REMAPPING IT SCREWS TO THE TOP OF THE FEATURE OF THE EFFECT CONTROLS PANEL.

  Expected results: READ MORE TOP! TIME REMAPPING HAS BEEN BROKEN SINCE CS4 AS AS FAR AS I KNOW AND NOTHING HAS BEEN DONE ABOUT IT...  SO FRUSTRATING!

  I have always worked around him or avoided using the selective time remapping effect but I've had enough of him... It's like the ability to change the color of the fonts on this forum, non-functional (the last time I tried to use it), but I prefer being able to be editing as colorful letters time remapping, I paid for the time remapping in CS4 and CS5 effect.

  Peter

  > Yes I have feature request/Bug report page my favorites now, but I have little confidence in their sincere care or intent. Having recently learned that my upgrade to Production Premium CS5 made me eligible for a 'free advantage', I tried to make the request. I followed the links, there were two, and they both took me to the same page, a page that had NO top at all links (This Page here). I opened a 'customer care case' and they told me to go down that same path and choose my 'delivery '.

  Bug reports and feature requests go directly to the engineering basis for Premiere Pro team. People who treat and read these reports are right next to the Director of engineering, product manager and so on. I am the person who treats these reports for After Effects, and I work closely with the people who do it for Premiere Pro. These reports and applications are very important for us.

  People who treat the benefits of registration, on overall web pages, customer service, and so on... Well, they are in an entirely different group. You cannot draw conclusions on how we treat (good or bad) how bug reports are these other things.

  This is not to say that we are in the first team Pro can help get these other things fixed. I have, on the one hand, make it a point to emphasize issues like these to the appropriate people. I'll pick up the phone and call people to report problems as you mentioned here as soon as I hit submit on this response.

• Ss12, time remapping: how to remove one of the multiple time zones?

  Ss12 has the time remapping effect, which is excellent.

  I remapped a clip, featuring several "zones" in slomo.  After clicking on the + sign to create the last zone, I realized that this was too many, and not really quite the same concept as the other.  I had not yet dragged the border to create any length.  But there seems to be no way to remove it, delete or cancel the action of having created it.  "Reset" to delete all time zones.

  I could leave it as is, with a normal attribute of the time full speed.  But it is sloppy and let this kind of artifact behind in any type of program or project can turn against you.  If this is not an option.

  I could delete them all and start over.  But it would be a lot of work and would not be closer to the fundamental issue, which is to know how to delete or cancel one time zone.

  Any suggestion will be highly appreciated.

  Kawika808

  The first thought that comes to mind was to put on 'Normal' for the time zone of interest here.

  But there is an easier way... at the top right corner of a block of time zone is of x. Click to close and to get rid of this particular time zone.

  Please let us know if none of this works for you.

  Thank you.

  RTA

• Time-remapping has a keyframe when I put new clip in the timeline:

  Hello

  I use PPCS4. I noticed that no matter what new clip that I bring in the timeline to a keyframe effect time remapping to 100%. Is this normal?

  I would like to see no time remap keyframe by default and there are still 100%. The reason is that I use the Mercalli stable plugin and will not work if the time remapping a key image on it. So I always have to erase it first was can use the plugin. A bit boring.

  Thank you

  Simon

  I use PPCS4. I noticed that no matter what new clip that I bring in the timeline to a keyframe effect time remapping to 100%. Is this normal?

  Yes, it is a normal behavior.

• Time-remapping creates white dots a frame before a transition.

  Hello.
  I made an animation with 2 scenes. I created a new composition with my finished animation where I activated the time remapping. In the last frame before the passage of the scene a scene two a lot of white dots appear on the screen. These points do not appear in the publication without the time remapping effect. I'll upload my AE file, so you can have a look.

  http://www.mediafire.com/download/nkdxqk5g9r7daq7/polygon.AEP
  Thanks in advance for the help.

  Ah... the look has the-Hollywood-fade. You can never forget the Immaculate appearance of this wonderful blend mode. Here's your culprit:

  

• Visualization of music. Time remapping problem!

  Hey everybody. I played with visualization of music after effects a little and now I'm in a bit of a pickle. Many channels of music publishing have visualizations with particles and or animations that change speed based on the music. I have a copy of Trapcode soundkeys so I can turn the music in keyframes and achieve such animations, but here's my problem.

  If I time remap a composition playing time * 1 + Enter keys sound after the typing animation kick goes to the rear where it would have been without the kick. Is there a way to make a demo you time remapping only go forward? Y at - it a way of expression that checks the value of the last image and I'm way off?

  For example Monstercat make their background of particles. Is the speed of the particle generator ramp or there at - it a way to get similar effects of time remapping, so it could be used on more varied and interesting effects. Any help and responses are greatly appreciated!

  Video example:

  [E] - Stephen works - Porkchop Express [version Monstercat] - YouTube

  Thank you very much!

  Tapio-

  Managed to get what I wanted with this practical guide to Dan Ebberts: Expression of speed and frequency

  I don't even think of using the integrals and others. Now, I can input to output of soundkeys in a sheath of control that integrates it and cumulatively becomes bigger and bigger that the sound happens so. Then I can make the time remapping effect following.

  I'll have to play with all these new possibilities!

• strangeness rounded when time-remapping is 512 seconds?

  OK, this one is total of disconcerting.

  I have a script to configure comps with a stack of layers where each layer is actually a stop on images from the video, each layer has activated the time remapping and then I put the value at time 0 for each layer (and then delete the key of the second). I have been using this technique one way or another for years without any problem. Then today, I noticed some glitchy from a certain point results. I assumed it was a matter of 24 / 25 fps but not, it seems to be a rounding problem when the defined time-remapping is greater than 512 dry.

  so my troubleshooting code looks like this (the timeOffset value is 0.04 or 1 frame at 25 fps)

  alert("tmap about to set as " +  (i*timeOffset))
  tMap.setValueAtTime(0,(i*timeOffset);
  alert("tmap value that was actually set" + tMap.valueAtTime(0,true))
  

  then, when trying to put the first alert returns with 512.04 as expected but the second alert is back with 512.039978027344 always 512.04 time.

  obviously done Ae internal to come round returns with an entire image number (as shown in the user interface), but here's the weird part, this internal rounding seems to work very well all the way to the point of 512 dry but starts then will knock out, almost as if he went from round() to floor()

  i.e.

  If I put the 484.04 I actually get get 484.039978027344 that I rang the Bell to show the 00:08:04:01 structure, which is what I want

  But if I put 512.04 I get 512.039978027344 Ae rounds down to show the frame 00:08:32:00 instead of 00:08:32:01, not what I want.

  very frustrating.

  It is certainly a bug right?

  .. /JL

  The floating point precision of ExtendScript is based on the old ECMA 3 Javascript since 1997. A lot has changed/been fixed in nineteen years. There was a few posts related to the disorder of precision.

  Problem of precision CompItem.displayStartTime

  Problem of duration and composition accuracy

  What is the problem with the term?

  timeToCurrentFormat bug?