Visualization of music. Time remapping problem!

Similar Questions

• Time remapping problem :(

  Hey guys, I may sound stupid for this but I have a problem when I have the time re - map, for some strange reason when I place a keyframe down, its on a straight line almost dead causing the clip to play horribly slow or choppy, sometimes even a fixed image. Oh and this is a clip of 60 frames per second, if that helps

  I think you look at the graph of speed rather than the value graph. The speed graph is almost useless in the time-remapping. It is the slope of the curve of value that lets you know what is happening with your video. The value graph represents time. Time-remapping is somewhat difficult to understand because you need to display the time in a whole new way. It's like Einstein said, "time is relative." Try showing a graph of reference and modify the value graph.

  Assuming it's the speed graph I see that video is speed up when it gets to the first keyframe, then play at almost a constant speed between the keyframe 1 and 2, it accelerates quickly and then plays a very slowly, increasing speed and so on. There are also rough places in the graph that indicates speed changes quickly. The problem is that I can't say anything about the speed of the element using this view. Take a look at this example.

  

  Between points 1 KF and KF 2 video playback at normal speed therefore is from time to time real. KF 2 time starts going backwards because the value line goes to the bottom of the Hill. KF 3, KF 4 times is now in the normal direction and because the slope is the same between 1 KF and KF 2 time works again in the right direction. Here's the catch and the thing that is hard to visualize. Time headed worms in real time up to 06:17 then time runs backwards until we get to 16:11, but the time, or frame number, from video to 16:22 2.5 seconds. We have moved the time of the video to 2.5 seconds after viewing the video at 16:11. Did you follow that. See, it's hard to see on the graph.

  Now between KF 4 and KF 5 the fun really begins. You must work for him to think about the value graph, at the time and the speed as the exchange rate graph not playback speed. As you can see the time begins to increase after KF 4 and then reached a steep speed for a few frames, then time begins to slow down until to KF 5, time stops. The speed graph shows time speed up and then slow down.

  So, how do you solve the problem with your time-remapping? First, change the speed graph. Then press the G button and hold down the Alt/Option key to change the tool pen tool conversion Point (the little V on the side) and click on each of the key frames to remove the Bezier handles that cause spikes in the graph of your values. If you want to do some easing in time standard in the remapping and ease ease on does not work most of the time because they are designed for spatial relationships of no temporal relations. This means that you will need to change the Bezier handles in the speed graph very carefully to achieve the desired effect.

• time remapping only keyframes.

  I know it's possible to control selection of kinship between the comp. so that the blades in a model cursors or wha Ewer in one other comp. but is it possible to time remapping those keyframes.

  
  

  lets say I have a lets comp. call comp (1) it has a solid blue, a solid red and a comp (2) containing a layer of setting with 2 sliders.

  
  

  in comp (2) I animate the slider that the slider, it starts at 0 we a second goes up to 100 more. slider 2 starts at 0, then up to a 100 while cursor one falls down... or something like that...

  
  

  I am now able to choose the cursor to whip one and two for the opacity of the red and solid blue in comp (1).

  
  

  Now when I play comp (1) solid red goes from 0 to 100 and then the blue charge to do the same thing.

  
  

  Here's the question:

  
  

  I hope that when I have the time remapped Comp (2) comp (1) solids would fade and go down faster or slower depending on how I have time remapped comp (2) I comp (1).

  but it backs do not work as I expected. keyframes don't move at all, but are kept synchronized whit timecode regardless of my time-remapping.

  is there a way that I can time remap keyframes...

  hope that makes sense.

  If you change a cam multi session in AE you do not use the software as it was designed. Your model will be a mess, check timing on cuts is extremely painful and difficult, changes will be almost impossible and it will take ten times longer than the cutting project in Premiere Pro. AE is not a Publisher. AE was specifically designed to create Visual effects or motion graphics shots or in some cases, a few sequences that you change in a move in a NLE such as Premiere Pro. 90% of my comps AE are less than 7 seconds, because 90% of my cuts in all the movies I make are less than 7 seconds. If you set up your multi cam project in Premiere Pro Cup Multi Cam can be almost as fast as direct switching. You just need to learn how do.

  If you need to perform processing of your shots in AE and then cut it into Premiere Pro, choose the photos you want to fix first. If they are short, and then use dynamic link to process the shots in AE. If every time a need for treatment or plans are long, depending on the settings that you want to do, a better option is to make a digital intermediate (DI) by using a lossless format (or better yet a 10bits or better DI) and do your treatment in AE, and then change the final output in Premiere Pro. Since it is a music production, you'll also want to do your final mix in Audition to take full advantage of the tools available to improve playback of your music.

  If you really want to use a cursor to cut between the two cameras, then that is easily done by linking the opacity for the two layers for a cursor that you animate from 0 to 100. You simply place 100 - in front of the expression of the second camera. If you have two cameras, you could add a checkbox and an if statement then you should change the box to change between 1 and 3 or camera camera 2 and 3. It would quickly become a complex montage and time consuming, and it's never going to be as fast or as efficient as the editing in Premiere Pro using the multi camera configuration.

  If you really want to try it should look like this for 2 cameras:

  Place your cursor on the opacity layer and name it the cursor something meaningful like 'change Camera.

  Camera layer opacity 1.

  thisComp.layer("Controller").effect ("change Camera")("Slider")

  The opacity of the layer camera 2.

  100 - thisComp.layer("Controller").effect ("change Camera")("Slider")
  It will look like this:
  
  Who's going to do in AE and give you an overlap perfect between the cameras, but I wouldn't try to make that kind of a tool for editing in AE in the first place.
  EDIT: I forgot to mention that if you do not want a dip in brightness when melted between the cameras, you must set the blending mode to add Alpha. You do not have the problem in Premiere Pro.

• Reverse the time remapping effect?

  Hi, I have a membership with the time-remapping applied via an expression and a skeleton key slider controlling the speed of reading of percentage.

  Inside of the time remapped composition there is an effect property I want to be done by the time remapping. Is it possible to somehow invert the time remapping effect so that it appears unchanged in the composition of parent?

  I think I'm close, but I still can't understand:

  -Hand Comp, example time: 0:00:14:18

  -Comp time to parents: 0:00:14:20, remapped to time right now (maybe before and after by a few images)

  -Nested Comp expression of effect property:

  var time = counteractTimeDisplacement - (((comp("__Main_Comp__").layer ("FrameDifference") .timeRemap - 1)));

  etcEtcEffectPropertyValue = somethingReferenced.valueAtTime (counteractTimeDisplacement);

  
  

  -FrameDifference Composition (simply shows the weft of the difference in time)

  Remapped time: 0:00:01:02 / / added 1 second to allow negative values, when the time remapping effect is less, perhaps that should not be a timeRemap property, but I don't know how to use time on an object. null values

  -Expression of remapping the colors:

  ()comp("Main_Comp").layer ("Parent comp') .timeRemap - time) + 1

  Above doesn't work and seems out of step. I realized the FrameDifference composition is also indirectly done by the time remapping effect because the nested composition can access it and its remapped, so I tried for the composition of FrameDifference :

  -Composition FrameDifference

  -Expression of remapping the colors:

  (comp("Main").layer ("Parent model") .timeRemap .valueAtTime (comp("Main_Comp").layer ("Parent comp') .timeRemap) - .timeRemap comp("Main_Comp").layer ("Parent model")) + 1

  Its still not sync, can someone who understands the remapping / time better than me please help I can't see where im going wrong. Yet once I can't get out of the effect inside the remapped comp and use separately as this will cause other problems.

  Thanks for reading

  You make it too difficult. If you have a layer or element that you do not want be affixed by the time remapping effect then put this element in comp. Another thing is just a waste of time.

  Change the speed of reading over time can be very complicated. The best way to understand what you do is look to the graphics editor. You need a much more complex expression in order to speed up and slow down playback without taking the time reverse. Please see motionipt.com where Dan Ebberts can show you how to make the ramp upward and boat speed reading thing.

• strangeness rounded when time-remapping is 512 seconds?

  OK, this one is total of disconcerting.

  I have a script to configure comps with a stack of layers where each layer is actually a stop on images from the video, each layer has activated the time remapping and then I put the value at time 0 for each layer (and then delete the key of the second). I have been using this technique one way or another for years without any problem. Then today, I noticed some glitchy from a certain point results. I assumed it was a matter of 24 / 25 fps but not, it seems to be a rounding problem when the defined time-remapping is greater than 512 dry.

  so my troubleshooting code looks like this (the timeOffset value is 0.04 or 1 frame at 25 fps)

  alert("tmap about to set as " +  (i*timeOffset))
  tMap.setValueAtTime(0,(i*timeOffset);
  alert("tmap value that was actually set" + tMap.valueAtTime(0,true))
  

  then, when trying to put the first alert returns with 512.04 as expected but the second alert is back with 512.039978027344 always 512.04 time.

  obviously done Ae internal to come round returns with an entire image number (as shown in the user interface), but here's the weird part, this internal rounding seems to work very well all the way to the point of 512 dry but starts then will knock out, almost as if he went from round() to floor()

  i.e.

  If I put the 484.04 I actually get get 484.039978027344 that I rang the Bell to show the 00:08:04:01 structure, which is what I want

  But if I put 512.04 I get 512.039978027344 Ae rounds down to show the frame 00:08:32:00 instead of 00:08:32:01, not what I want.

  very frustrating.

  It is certainly a bug right?

  .. /JL

  The floating point precision of ExtendScript is based on the old ECMA 3 Javascript since 1997. A lot has changed/been fixed in nineteen years. There was a few posts related to the disorder of precision.

  Problem of precision CompItem.displayStartTime

  Problem of duration and composition accuracy

  What is the problem with the term?

  timeToCurrentFormat bug?

• Audio time remapping?

  Hello

  Is there a way of time-remmap the audio with Adobe CC? I need to gradually slow down a clip of music and then accelerate this return.

  Does anyone have experience with this?

  Also, I noticed that decreases the speed of a video clip is not the same as the use of the effect of the time-remmap. Is there a formula to find out how to synchronize clips with two effects? Mainly to synchronize audio and video clips.

  Thank you

  These help you?

  Time-remapping. No stupid Questions with Colin Smith | Adobe TV

  Pitch shifting and time remapping in Adobe Audition - YouTube

• Time remapping of the issues

  Hi all

  Having some problems with time-remapping. I try to slow down a clip and have once again this clip until the normal speed speed (time ball such that it is often called). But when a attempt at time-remapping, I run questions where I can not set the speed on a keyframe, I create. It does not allow for it. I'm probably wrong, but I searched and could not find a solution. Thank you

  See here:

  Time-remapping. No stupid Questions with Colin Smith | Adobe TV

  and here:

  Time remapping of tutorials

• time remapping newbie

  Coming from first - I just looked a little tutorial and I sorted basics: I dragge my keyframe for the end of the 8 min to 1 min clip, but I'm not part of a clip that I want to play at speed normal 25 fps in this case. I added 2 new keyframes and tense than secion new but have no idea of what is the fps. Its easy to the speed of the ramp upward, but I do understand an eloquent or easy way so he can play at normal speed.

  If things get confusing, simply split the clip in several layers / segments. Nmowhere t - it say you have to do everything on a single layer. Yet, I am not sure your problem, you just went come too quickly. By default the time remapping will create a start and end keyframe and they will make sure that it plays to its native speed. So adding several keyframes inbetween would be the same. So basically you have added your segment with constant speed first, then re-arranged and added multiple keyframes on the timeline after you made sure that your segment plays like you want...

  Mylenium

• Timewarp / time remapping works not well?

  Hi, I have a problem with speed variation. I got 25 fps made out of 3ds max exr images I want to add variations of speed in AE. The problem I face is that the movie stutters when you use the time remapping effect. Basically, what I was trying to do was made the scene very slow out and so I can climb in AE. I even tried different blending modes (moving pixels).

  Here's what happens when you attempt to add some speed changes (when he slow down the initial speed of sequences)

  1. time remapping causes stuttering.

  2. While timewarp gives strange errors (error blur that looks like) interpolation speed goes like 100 - > 150 - > 100 and error occurs when up to 100

  system:

  Windows 7 64 bit, i7 2600 k, 3, 4 GHz, 16 GB RAM, Geforce GTX 580

  AE CS5.5

  Do not use MAX I can only speculate, but questions usually boil down to the underlying platform. I would probably be there platform like a real train carriage works - a support wheel as the anchor, the other under the constraint of the target. By the construction of a hierarchy, you can even build the entire train and it follows the curvature almost perfectly. You then simply copy & paste the keyframes for the main bodies and understand the moment so they are evenly spaced. Once you have, you could apply a temporal distortion curve to the entire animation and everything should happen almost automatically. At least this is how I would approach it in Cinema 4 d. Without knowing your exact configuration, of course, it is difficult to judge these things. Well, anyway, as a minor, you should consider rendering a speed pass also in MAX and using Twixtor Pro instead of Timewarp. that would solve some of your problems already and you might still change using masks. It's definitely worth watching, if you can afford it...

  Mylenium

• Time remapping option grayed out on precomp

  Hello

  I have an effects shot that I need to slow down a bit, but time-remapping becomes unavailable after I precompose the things I stretched. The precomp includes only two layers - images raw m2t and a solid layer with fractal noise animated and masks. Time-remapping is available on the layer of the raw images, but not on the precomp, so the problem seems to be with the solid layer, even if she has pictures and animations. Is there a solution to this?

  See you soon.

  The only reason why you wouldn't be able to remap time a demo is that you move all the attributes or if there are keyframes in the precomp.

  Select your demo in the timeline panel and press the U key. If you then see keyframes before dialing again.

• Time remapping key frames cause other keyframes become independent to where they are on the timeline

  This is the BUG report, in that I just sent. If anyone has anything to add.

  ******BUG******
  Concise problem statement:
  When I add the time remap keyframes to a clip, other keyframes become unrelated to the part of the timeline, on what they are.

  Steps to reproduce the bug:
  1. add TIME REMAP keyframes in a MONTAGE WITH of OTHER keyframes (AS the POSITIONING of KEY frames)
  2.
  3.

  Results: I HAVE CHANGE THE COORDINATES OF UP/DOWN AND THE CLIP DOES NOT MOVE YET, SO I RUB ALONG THE CLAMP AND IT MOVES UPWARDS OR DOWNWARDS TO A COMPLETELY DIFFERENT OF THE CLIP PART. AS SOON AS I HAVE TIME REMAPPING IT SCREWS TO THE TOP OF THE FEATURE OF THE EFFECT CONTROLS PANEL.

  Expected results: READ MORE TOP! TIME REMAPPING HAS BEEN BROKEN SINCE CS4 AS AS FAR AS I KNOW AND NOTHING HAS BEEN DONE ABOUT IT...  SO FRUSTRATING!

  I have always worked around him or avoided using the selective time remapping effect but I've had enough of him... It's like the ability to change the color of the fonts on this forum, non-functional (the last time I tried to use it), but I prefer being able to be editing as colorful letters time remapping, I paid for the time remapping in CS4 and CS5 effect.

  Peter

  > Yes I have feature request/Bug report page my favorites now, but I have little confidence in their sincere care or intent. Having recently learned that my upgrade to Production Premium CS5 made me eligible for a 'free advantage', I tried to make the request. I followed the links, there were two, and they both took me to the same page, a page that had NO top at all links (This Page here). I opened a 'customer care case' and they told me to go down that same path and choose my 'delivery '.

  Bug reports and feature requests go directly to the engineering basis for Premiere Pro team. People who treat and read these reports are right next to the Director of engineering, product manager and so on. I am the person who treats these reports for After Effects, and I work closely with the people who do it for Premiere Pro. These reports and applications are very important for us.

  People who treat the benefits of registration, on overall web pages, customer service, and so on... Well, they are in an entirely different group. You cannot draw conclusions on how we treat (good or bad) how bug reports are these other things.

  This is not to say that we are in the first team Pro can help get these other things fixed. I have, on the one hand, make it a point to emphasize issues like these to the appropriate people. I'll pick up the phone and call people to report problems as you mentioned here as soon as I hit submit on this response.

• In the visualization of my photos display problem: I have red spots in different parts of the pictures. Someone knows how to fix this?  I rebooted my MacBook Pro, but it does not solve the problem.

  In the visualization of my photos display problem: I have red spots in different parts of the pictures. Someone knows how to fix this?  I rebooted my MacBook Pro, but it does not solve the problem.

  Details please

  What version of Aperture? Is OS X 10.7.5 as you say correct for your OS? You shoot JPEG or RAW? If RAW device? Wharton has changed since this worked?

  LN

• Time-remapping creates white dots a frame before a transition.

  Hello.
  I made an animation with 2 scenes. I created a new composition with my finished animation where I activated the time remapping. In the last frame before the passage of the scene a scene two a lot of white dots appear on the screen. These points do not appear in the publication without the time remapping effect. I'll upload my AE file, so you can have a look.

  http://www.mediafire.com/download/nkdxqk5g9r7daq7/polygon.AEP
  Thanks in advance for the help.

  Ah... the look has the-Hollywood-fade. You can never forget the Immaculate appearance of this wonderful blend mode. Here's your culprit:

  

• I want default time remapping controls on clip

  Whenever I want to change speed by time remapping with keyframes, I need to click with the right button on the clip of fx square and then replace the time-remapping. By default, this is the opacity. How can I change the speed because the one I use the most? I use Premiere Pro cc v10.4 and iMac 2015

  This isn't a user for the time option.

  Feature request/Bug Report Form

• Time remap value is grayed out.

  First CC

  When I try to time remapp a clip I can add keyframes and can change them on the timeline.

  But why can't use them like other keyframes for the Position and Zoom?

  I can't change the scale, I can't catch them and move them to the video effects tab.

  I can only edit and move them in the Timeline... But I want to just total control... I want to give an exact value... I want to make faster the 838%...i want to make correspond them with the other keyframes...

  Please halp...

  Time-remapping is performed on the timeline.

  Time-remapping doesn't have the same kind of key frames, like the other properties.

  If you want more control using AE for this.

  You can post a screenshot of what is exactly gray?