Where to install the games will be their better functioning, in the system (usually the drive C) disk or another drive (D, E, F,...)? And why?

Similar Questions

• Cannot install the driver HP Photosmart C6180 and software problems-, yet get HP-related crashes

  I had a lot of crashes with my main PC, a number related to HP, including at startup ("your computer has recovered from a serious problem") and close (the HP software responds only to not close).  I reformatted the system, reloaded Win XP Pro disk and all updates.  I couldn't reinstall the HP drivers and other software from my CD or after you download from the HP site.  The stalls of process at an early stage (only in step 2), sometimes blocks your PC when it does.

  The last time, I filled the experience HP online questionnaire and noted that I thought I had a generic problem rather than related to HP.  However, checking details on the Microsoft error report, I discovered that after the start I regularly get the message:

  HP Installer Recovery plug has encountered a problem and needs to close

  Error signature

  AppName: hpzrcv01.exe AppVer: 7.0.0.71 ModName: msvcrt.dll

  ModVer: 7.0.2600.5512 Offset: 00036fa3

  Download of HP is about 76 Mb.  I have on my C drive (System) of a program file HP/Temp with 7 Mb and on the E partition where I wanted to install the drivers and other software a program file HP / Digital Imaging, 30 MB.  Both are dated yesterday, when I finally tried to install from a download.  The HP printer is not displayed under the control panel of configuration/printers, or the Add Printer Wizard can recognize it on the network.  (I have not tried to disconnect the router and connect directly to the PC, but that shouldn't matter to software problems, should it?)

  Any advice would be welcome.

  Thank you once again, Dexter - it was a Microsoft problem rather than a problem of HP, I finally found and installed the right fix MS and just installed the HP software - to be on the safe side, I only did the essentials of basic printing and left the other stuff for later.  And I'll report this "resolved" if I can find the button after validation!

• Cannot install the driver for Deskjet F4500

  I get the error message: "the system cannot find the specified file' where to install the driver for F4500 to a new race of ASUS ZEN widows 7 64 bit and install then fails." Everything works fine on my old Lenovo (also Windows 7). Help!

  You try to use disk or have you downloaded the latest drivers on the website of HP series?

  Here is the latest version of the drivers for your printer and the full OS features:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-73705-2&cc=us&DLC=en&LC=en&OS=4063&product=3944758&sw_lang=

• I have a SSD C drive and a larger secondary drive. Where to install the products. What is the best for performance?

  I have a SSD C drive and a larger secondary drive. Where to install the products. What is the best for performance?

  installation on your SSD will give better performance, but can consume a lot of disk space.

• Where to install the agents?

  Hello
  
  I now architecture:
  -Server 1 - ODI installed with the Server option
  -Client 1 - installed ODI with the customer option
  -Client 2 - installed ODI with the customer option
  
  -Server 2 - DB Oracle installed - ODI repositories created
  -3 Server - Oracle DB - source system
  -Server 4 - MS SQL Server - source system
  -5 - Oracle DB server - target system
  
  I do not know where to install the agents for this architecture:
  -on server 1?
  or
  -on 3 or 4 (source systems) servers
  or
  -the Server 5 (target system)
  
  What solution will be the best in this case?
  
  Thanks in advance!

  It is best to install the agent as close to the target as possible. So, in your case, it will be on Server 5.
  In addition, since you don't have only one target, then you have the advantage that you can install only one officer and it works.
  Just keep in mind, that during the installation of the agent on the Server 5
  Server2 and server4 serveur3 must be visible to Server 5.

  To further explain the above statement,
  We have Filesystems FS1, FS2, on which the source files are located.
  And the agent is on ORADB1 that is the target Oracle DB. FS1 and FS2 file systems are visible to the system on which ORADB1 is installed and that is why the agent on ORADB1 can also see file systems and so access the files for processing.

  HTH

• W10 upgrade will install the driver for MX870?

  I suppose that there is a driver for the MX 870 on this website - but will be upgrading to W10 (of W8.1) this printer and automatically installs the latest driver?

  Joe

  JoeZ salvation,

  Please uninstall your PIXMA MX870 before moving on to Windows 10.  Once installed Windows 10, please visit the Support Page of your PIXMA MX870 to download and install the driver Windows 10:

  https://www.USA.Canon.com/Internet/portal/us/home/support/details/printers/support-inkjet-printer/MX...

• Where to install the IEE 802.11 g for Windows Vista?

  Where to install the IEE 802.11 g for Windows Vista.

  It's for the wireless, as long that you install the latest driver for your wireless manufacturer, it should install. Note that your wireless network must support this standard in wireless hardware.

  If you update your Windows, it could install too last driver update as optional.

• If Windows will send a message when she install the driver for a USB device successfully or unsuccessfully?

  As you know, the window search and install the driver for a new device (USB) coming. We can get the status of the device through Device Manager manually. but I was blocked by the following questions when trying to obtain programmatically.

  Is it possible for me to get the driver installation progress window? Or how could I get the event that she has finished the installation and the result (install has failed or succeeded)?

  Best regards

  -Alvin Hu

  Vista does not send these messages and cannot be configured to do this (progress or when it is done or if it succeeded or failed).  The only way to make sure is to plug and then, go to start / Control Panel / Device Manager and check for the device and click on it for more information on its status.  You can also check if the appliance does not work - it's probably faster and more accurate.  Many USB devices indicate their status by starting to work (a mouse begins to scroll, a USB flash drive or an external USB drive to bring the Autorun screen or appear in the Windows Explorer,...) and USB devices tend to start working quickly enough so it should not be a long wait.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows 7 will not install the driver for hp deskjet 6540

  I followed all the instructions on the site of HP and windows will not find and install the driver for my HP 6540. How to make Windows do what should or is there a reliable place to download the driver from?

  There is a driver recommended relatively complete for the Deskjet 6540 written by HP and Microsoft via Windows Update.  If the automatic install does not work, perform the following steps: connect the printer by USB.  Click Start, devices and printers, adding a printer, select the appropriate port and when the list of printers, click Windows Update in the lower right part of the dialog box.  It will take a few minutes for the update to complete, once that he choose the Deskjet HP (Hewlett-Packard no) 6500 Series.

  If for some reason you can't use the driver provided through Windows Update, you can download the driver from the Windows Catalog site.  The Windows Catalog site requires the use of Internet Explorer.  For the Dsekjet 6500 Series there are three drivers listed.  11.4 Mo is the x 86 32-bit driver.  11.6 Mb file is x 64 64 bit version.  13.9 MB file is the least common architecture IA64.

• I have an Epson Perfection 1640SU. My operating system is Windows 7 Ultimate 64 bit. Epson does not a driver for 64-bit. If I install Windows XP mode, I will be able to download the driver of Epson XP and use this scanner?

  I have an Epson Perfection 1640SU. My operating system is Windows 7 Ultimate 64 bit. Epson does not a driver for 64-bit. If I install Windows XP mode, I will be able to download the driver of Epson XP and use this scanner?

  Best way for you is to use Vuescan. I use it in conjunction with a Canon Lide 30 and it works very well...

  http://www.Hamrick.com/

  There is a trial version... Mike Hall MVP - Windows Desktop Experience http://msmvps.com/blogs/mikehall/

• Try to install the driver, but will not install correctly, ArcSoft Photolmpression 6.

  Windows 7 no Photofix Copier of Summit, do not to install the driver properly error. Any help for this old surfer of money with the early stages of dementia would be much appreciated.
  Thanks to all who can help.
  Concerning
  TREV

  I think you will find that your Copier, Photfix, is not compatible with win7, according to many other messages from various sites.

  You could try the free trial of http://www.hamrick.com/ but be aware that if it works, and you decide to buy its probably at a cost similar to you buy a compatible scanner.

  BTW, the title line of your post is not really applicable to your question/problem.

• Windows wars Napoleon Cossacks 8. I install the game install the patch but it does not start, just flashing screen and that's it. has tried everything what is possible. D what can I do to read. ?

  I install the game install the patch but it does not start, just flashing screen and that's it. has tried everything what is possible. D what can I do to read. ?

  Wednesday, April 15, 2015, 17:56:29 + 0000, PhilipMallard wrote:

  I bought a Windows 8.1 today and wish I hadn't! It's a pain to use (I had a Windows 7 previously). None of my games of Cossacks work on windows 8.1 either and I've tried them in compatibility mode. Is it possible to install Windows 7 on my new computer and replace the disastrous 8.1 version?

  I would like to point out something that you may not realize: Windows 8
  has two interfaces; the modern/Metro Interface (which may be all the)
  you have looked at) and the traditional desktop Interface. You can use
  one or both. This traditional desktop Interface is almost
  identical to the interface of Windows 7. the biggest difference is that
  There is no Orb start clicking to bring up the start menu.

  But note that you can get the ORB start by using one of the many
  third-party programs, are free or very cheap (the classic interface
  http://classicshell.sourceforge.NET/ and debut8 to
  http://www.stardock.com/products/start8/; my personal preference is
  Debut8, but they are both very good).  And goes from an interface to
  the other is very easy; There are several ways, but simply by pressing
  the Windows key is perhaps the easiest.

  Just install one of these two and using the traditional desktop computer
  interface may be a better choice for you than going to Windows 7.
  I use Windows 8, almost exclusively with traditional workstations
  the interface and with 8 Start installed. If you were to look at and use
  my computer, you may have a hard time realizing that it is not
  Windows 7.
  I also recommend to read "how to make Windows 8 or 8.1 watch and.
  Want Windows 7 "to http://www.howtogeek.com/elk/298/45121/4206
  I can't address the issue with your games, except to say that
  whenever you move to a new version of the operating system, some of
  which is used to run on the former does not work on the new. And it's
  much more likely with utilities and games with companies
  applications.

• How to install the driver LAN for Satellite Pro A120

  In fact, my problem is that I didn't know how to install the driver on my Satellite Pro A120 lan connect net throug.
  The issue that there's no facility to do to complete the installation.

  And theres other question that I need the Ethernet controller

  My laptop was vista operating system installed, but I change and put Windows XP

  Please help me

  Hello

  LAN installation is very easy.
  First of all, you need the correct LAN driver.
  In order to download the LAN driver please visit the Toshiba driver page and choose your model of laptop.

  Once the LAN driver has been downloaded, you will need to decompress.
  Then you will need to access the Device Manager, choose the controller Ethernet (network cards) and must point to the place where the LAN driver was decompressed.

  Then finish the installation procedure.

• I have to manually install the driver for Aspire ZC-102, updates when I move Windows 8 to 10?

  I have to manually install the driver for Aspire ZC-102, updates when I move Windows 8 to 10?

  I was struggling with this ACER for more than a year. I have do it I have back when it was still under warranty, 14 months ago. Now I've updated free online through Microsoft for Windows 10 back in early August. I had hoped that my mess was a stack of the operating system, but unfortunately, it's still a piece. However, there is no virus. I run Malwarebytes Pro full time with it has quarantined of PUPPIES as well as McAfee Anti Virus full time. I use cCleaner to keep cut up. I NEVER garguillo or browsed porn.
  I've got max 16 GB of RAM. I have very few applications other than Office 2013.

  Even if this thing was a room at the time where it was running Windows 8 and 8.1, so I want to try to make it work on Windows 10 without having to start over with a clean install. That's why I asked about the drivers.

  your ZC-102 will not have a direct drivers updated from Acer support, which means you have to rely on Windows Update by itself the drivers or get them by yourself.

  Let me give you 3 Tips:

  1) never use Registry cleaners Windows 8.x and above all, they are no longer needed

  (2) uninstall McAfee, he kills the performance of your machine, use the antivirus windows integrated, it is good and very light

  (3) If you require loading time fast on programs, think about an SSD upgrade

• How to install the driver dv6 6165tx UEFI?

  Hello...

  Guys it's Marie Laure could you help me with my problem.

  I have a laptop hp pavilion dv6 6165 tx... so, during statup operating system is showing that the the system fan is not working properly - F(1B) and I want to install UEFI driver for this problem to be solved.

  IAM unable to install UEFI driver using my flash drive. During the installation, it's show to make a partion on the disk.

  So, how to make this partition and install the driver from the UEFI. If anyone can help, it will be a great relief for me.

  Sorry, but try to install UEFI utility or support environment will not solve your problem. Most likely, you will need to clean or replace the fan to make the error message disappears.

  Please send BRAVO